| Message ID | 1400888507-11637-1-git-send-email-khilman@linaro.org |
|---|---|
| State | New |
| Headers | show |
On 05/23/2014 05:41 PM, Kevin Hilman wrote: > By default, add some padding to the DT blobs to facilitate later > patching. > > An example need for DTB patching is the need to modifiy the command > line on platforms where ATAGS are not (or cannot) be used to pass the > commandline. For example, we do not support a big-endian kernel > reading ATAGS from a little-endian u-boot, so the only way to pass a > command line in the DT. > > Also, without ATAG support (or if u-boot was built without > CONFIG_INITRD_TAG) the only way to pass an initrd is by adding an > initrd= option to command line (in the DT). > > Therefore, to facilitate adding to the DT command line directly in the > DTB, add some padding. > > Cc: Nicolas Pitre <nico@linaro.org> > Cc: Stephen Warren <swarren@wwwdotorg.org> > Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> > Signed-off-by: Kevin Hilman <khilman@linaro.org> > --- > I kinda pulled 64 bytes out of the air here since it's enough to add > some common things to the commandline like debug, earlyprink > initrd=<addr>,<size>, etc., but I'm certainlly not opposed to more > padding. Conceptually, Acked-by: Stephen Warren <swarren@nvidia.com> But I would expect a pad of something like 4KB to be more future-proof. U-Boot appears to use 4KB on ARM at least: ./arch/arm/dts/Makefile:37:DTC_FLAGS += -R 4 -p 0x1000 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
On Thu, May 29, 2014 at 8:55 AM, Stephen Warren <swarren@wwwdotorg.org> wrote: > On 05/23/2014 05:41 PM, Kevin Hilman wrote: >> By default, add some padding to the DT blobs to facilitate later >> patching. >> >> An example need for DTB patching is the need to modifiy the command >> line on platforms where ATAGS are not (or cannot) be used to pass the >> commandline. For example, we do not support a big-endian kernel >> reading ATAGS from a little-endian u-boot, so the only way to pass a >> command line in the DT. >> >> Also, without ATAG support (or if u-boot was built without >> CONFIG_INITRD_TAG) the only way to pass an initrd is by adding an >> initrd= option to command line (in the DT). >> >> Therefore, to facilitate adding to the DT command line directly in the >> DTB, add some padding. >> >> Cc: Nicolas Pitre <nico@linaro.org> >> Cc: Stephen Warren <swarren@wwwdotorg.org> >> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> >> Signed-off-by: Kevin Hilman <khilman@linaro.org> >> --- >> I kinda pulled 64 bytes out of the air here since it's enough to add >> some common things to the commandline like debug, earlyprink >> initrd=<addr>,<size>, etc., but I'm certainlly not opposed to more >> padding. > > Conceptually, > Acked-by: Stephen Warren <swarren@nvidia.com> > > But I would expect a pad of something like 4KB to be more future-proof. > U-Boot appears to use 4KB on ARM at least: > > ./arch/arm/dts/Makefile:37:DTC_FLAGS += -R 4 -p 0x1000 Great. As I mentioned above, I'm certainly not opposed to more padding, and agree that it would be more future proof. I was simply being rather conservative in case folks didn't want to see every .dtb grow by 4k. I'll wait a bit to see if there are any other opinions, and the respin with 4k padding. Kevin -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 6a5b0decb797..d7a57c2620f3 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -264,7 +264,7 @@ $(obj)/%.dtb.S: $(obj)/%.dtb quiet_cmd_dtc = DTC $@ cmd_dtc = $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \ - $(objtree)/scripts/dtc/dtc -O dtb -o $@ -b 0 \ + $(objtree)/scripts/dtc/dtc -O dtb -o $@ -b 0 -p 64 \ -i $(dir $<) $(DTC_FLAGS) \ -d $(depfile).dtc.tmp $(dtc-tmp) ; \ cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile)
By default, add some padding to the DT blobs to facilitate later patching. An example need for DTB patching is the need to modifiy the command line on platforms where ATAGS are not (or cannot) be used to pass the commandline. For example, we do not support a big-endian kernel reading ATAGS from a little-endian u-boot, so the only way to pass a command line in the DT. Also, without ATAG support (or if u-boot was built without CONFIG_INITRD_TAG) the only way to pass an initrd is by adding an initrd= option to command line (in the DT). Therefore, to facilitate adding to the DT command line directly in the DTB, add some padding. Cc: Nicolas Pitre <nico@linaro.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> --- I kinda pulled 64 bytes out of the air here since it's enough to add some common things to the commandline like debug, earlyprink initrd=<addr>,<size>, etc., but I'm certainlly not opposed to more padding. scripts/Makefile.lib | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)