| Message ID | 1402051016-28853-1-git-send-email-broonie@kernel.org |
|---|---|
| State | New |
| Headers | show |
On Fri, Jun 06, 2014 at 11:36:56AM +0100, Mark Brown wrote: > From: Mark Brown <broonie@linaro.org> > > Since the OPP layer is a kernel library which has been converted to be > directly selectable by its callers rather than user selectable and > requiring architectures to enable it explicitly the ARCH_HAS_OPP symbol > has become redundant and can be removed. Do so. > > Signed-off-by: Mark Brown <broonie@linaro.org> > --- > Documentation/power/opp.txt | 3 --- > arch/arm/mach-exynos/Kconfig | 1 - > arch/arm/mach-highbank/Kconfig | 1 - > arch/arm/mach-imx/Kconfig | 1 - > arch/arm/mach-omap2/Kconfig | 1 - > arch/arm/mach-shmobile/Kconfig | 2 -- > arch/arm/mach-vexpress/Kconfig | 1 - > arch/arm/mach-zynq/Kconfig | 1 - > drivers/devfreq/Kconfig | 1 - > kernel/power/Kconfig | 3 --- > 10 files changed, 15 deletions(-) shmobile portion: Acked-by: Simon Horman <horms+renesas@verge.net.au> > diff --git a/Documentation/power/opp.txt b/Documentation/power/opp.txt > index a9adad8..c6279c2 100644 > --- a/Documentation/power/opp.txt > +++ b/Documentation/power/opp.txt > @@ -51,9 +51,6 @@ Typical usage of the OPP library is as follows: > SoC framework -> modifies on required cases certain OPPs -> OPP layer > -> queries to search/retrieve information -> > > -Architectures that provide a SoC framework for OPP should select ARCH_HAS_OPP > -to make the OPP layer available. > - > OPP layer expects each domain to be represented by a unique device pointer. SoC > framework registers a set of initial OPPs per device with the OPP layer. This > list is expected to be an optimally small number typically around 5 per device. > diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig > index d58995c9..3f78c45 100644 > --- a/arch/arm/mach-exynos/Kconfig > +++ b/arch/arm/mach-exynos/Kconfig > @@ -103,7 +103,6 @@ config SOC_EXYNOS5440 > default y > depends on ARCH_EXYNOS5 > select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE > - select ARCH_HAS_OPP > select HAVE_ARM_ARCH_TIMER > select AUTO_ZRELADDR > select MIGHT_HAVE_PCI > diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig > index 830b76e..bef970f 100644 > --- a/arch/arm/mach-highbank/Kconfig > +++ b/arch/arm/mach-highbank/Kconfig > @@ -3,7 +3,6 @@ config ARCH_HIGHBANK > select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE > select ARCH_HAS_CPUFREQ > select ARCH_HAS_HOLES_MEMORYMODEL > - select ARCH_HAS_OPP > select ARCH_SUPPORTS_BIG_ENDIAN > select ARM_AMBA > select ARM_ERRATA_764369 if SMP > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig > index 4cce93d..95690e4 100644 > --- a/arch/arm/mach-imx/Kconfig > +++ b/arch/arm/mach-imx/Kconfig > @@ -1,7 +1,6 @@ > config ARCH_MXC > bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 > select ARCH_HAS_CPUFREQ > - select ARCH_HAS_OPP > select ARCH_REQUIRE_GPIOLIB > select ARM_CPU_SUSPEND if PM > select CLKSRC_MMIO > diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig > index 0ba4826..524b027 100644 > --- a/arch/arm/mach-omap2/Kconfig > +++ b/arch/arm/mach-omap2/Kconfig > @@ -12,7 +12,6 @@ config ARCH_OMAP3 > bool "TI OMAP3" > depends on ARCH_MULTI_V7 > select ARCH_OMAP2PLUS > - select ARCH_HAS_OPP > select ARM_CPU_SUSPEND if PM > select OMAP_INTERCONNECT > select PM_OPP if PM > diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig > index dbd954e..b51d142 100644 > --- a/arch/arm/mach-shmobile/Kconfig > +++ b/arch/arm/mach-shmobile/Kconfig > @@ -86,7 +86,6 @@ config ARCH_R8A73A4 > select SH_CLK_CPG > select RENESAS_IRQC > select ARCH_HAS_CPUFREQ > - select ARCH_HAS_OPP > select SYS_SUPPORTS_SH_CMT > select SYS_SUPPORTS_SH_TMU > > @@ -265,7 +264,6 @@ config MACH_KZM9G > bool "KZM-A9-GT board" > depends on ARCH_SH73A0 > select ARCH_HAS_CPUFREQ > - select ARCH_HAS_OPP > select ARCH_REQUIRE_GPIOLIB > select REGULATOR_FIXED_VOLTAGE if REGULATOR > select SND_SOC_AK4642 if SND_SIMPLE_CARD > diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig > index 90249cf..71629fe 100644 > --- a/arch/arm/mach-vexpress/Kconfig > +++ b/arch/arm/mach-vexpress/Kconfig > @@ -66,7 +66,6 @@ config ARCH_VEXPRESS_DCSCB > config ARCH_VEXPRESS_SPC > bool "Versatile Express Serial Power Controller (SPC)" > select ARCH_HAS_CPUFREQ > - select ARCH_HAS_OPP > select PM_OPP > help > The TC2 (A15x2 A7x3) versatile express core tile integrates a logic > diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig > index 573e0db..bc485f2 100644 > --- a/arch/arm/mach-zynq/Kconfig > +++ b/arch/arm/mach-zynq/Kconfig > @@ -1,7 +1,6 @@ > config ARCH_ZYNQ > bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7 > select ARCH_HAS_CPUFREQ > - select ARCH_HAS_OPP > select ARCH_SUPPORTS_BIG_ENDIAN > select ARM_AMBA > select ARM_GIC > diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig > index 49e74c1..3dced0a 100644 > --- a/drivers/devfreq/Kconfig > +++ b/drivers/devfreq/Kconfig > @@ -68,7 +68,6 @@ comment "DEVFREQ Drivers" > config ARM_EXYNOS4_BUS_DEVFREQ > bool "ARM Exynos4210/4212/4412 Memory Bus DEVFREQ Driver" > depends on (CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412) && !ARCH_MULTIPLATFORM > - select ARCH_HAS_OPP > select DEVFREQ_GOV_SIMPLE_ONDEMAND > select PM_OPP > help > diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig > index 9a83d78..e4e4121 100644 > --- a/kernel/power/Kconfig > +++ b/kernel/power/Kconfig > @@ -253,9 +253,6 @@ config APM_EMULATION > anything, try disabling/enabling this option (or disabling/enabling > APM in your BIOS). > > -config ARCH_HAS_OPP > - bool > - > config PM_OPP > bool > ---help--- > -- > 2.0.0 > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Jun 6, 2014 at 8:14 PM, Simon Horman <horms@verge.net.au> wrote: > On Fri, Jun 06, 2014 at 11:36:56AM +0100, Mark Brown wrote: >> From: Mark Brown <broonie@linaro.org> >> >> Since the OPP layer is a kernel library which has been converted to be >> directly selectable by its callers rather than user selectable and >> requiring architectures to enable it explicitly the ARCH_HAS_OPP symbol >> has become redundant and can be removed. Do so. >> >> Signed-off-by: Mark Brown <broonie@linaro.org> >> --- >> Documentation/power/opp.txt | 3 --- >> arch/arm/mach-exynos/Kconfig | 1 - >> arch/arm/mach-highbank/Kconfig | 1 - >> arch/arm/mach-imx/Kconfig | 1 - >> arch/arm/mach-omap2/Kconfig | 1 - >> arch/arm/mach-shmobile/Kconfig | 2 -- >> arch/arm/mach-vexpress/Kconfig | 1 - >> arch/arm/mach-zynq/Kconfig | 1 - >> drivers/devfreq/Kconfig | 1 - >> kernel/power/Kconfig | 3 --- >> 10 files changed, 15 deletions(-) > > shmobile portion: > > Acked-by: Simon Horman <horms+renesas@verge.net.au> Hi Simon, Mark, Nice to see cleanups in this area. Reducing the number of Kconfig symbols must be a good thing. I'm not sure about the expected merge order for this kind of change vs queued up stuff in the renesas git tree, but I believe the following patch selects ARCH_HAS_OPP: [PATCH v3] ARM: shmobile: Mark all SoCs in shmobile as CPUFreq, capable Cheers, / magnus -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Jun 06, 2014 at 09:14:01PM +0900, Magnus Damm wrote: > On Fri, Jun 6, 2014 at 8:14 PM, Simon Horman <horms@verge.net.au> wrote: > > On Fri, Jun 06, 2014 at 11:36:56AM +0100, Mark Brown wrote: > >> From: Mark Brown <broonie@linaro.org> > >> > >> Since the OPP layer is a kernel library which has been converted to be > >> directly selectable by its callers rather than user selectable and > >> requiring architectures to enable it explicitly the ARCH_HAS_OPP symbol > >> has become redundant and can be removed. Do so. > >> > >> Signed-off-by: Mark Brown <broonie@linaro.org> > >> --- > >> Documentation/power/opp.txt | 3 --- > >> arch/arm/mach-exynos/Kconfig | 1 - > >> arch/arm/mach-highbank/Kconfig | 1 - > >> arch/arm/mach-imx/Kconfig | 1 - > >> arch/arm/mach-omap2/Kconfig | 1 - > >> arch/arm/mach-shmobile/Kconfig | 2 -- > >> arch/arm/mach-vexpress/Kconfig | 1 - > >> arch/arm/mach-zynq/Kconfig | 1 - > >> drivers/devfreq/Kconfig | 1 - > >> kernel/power/Kconfig | 3 --- > >> 10 files changed, 15 deletions(-) > > > > shmobile portion: > > > > Acked-by: Simon Horman <horms+renesas@verge.net.au> > > Hi Simon, Mark, > > Nice to see cleanups in this area. Reducing the number of Kconfig > symbols must be a good thing. > > I'm not sure about the expected merge order for this kind of change vs > queued up stuff in the renesas git tree, but I believe the following > patch selects ARCH_HAS_OPP: > > [PATCH v3] ARM: shmobile: Mark all SoCs in shmobile as CPUFreq, capable I propose that we fix that up by adding an incremental patch to mach-shmobile via my renesas tree once the dependency (assuming there is one) is in Linus's tree. -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Jun 6, 2014 at 9:50 PM, Simon Horman <horms@verge.net.au> wrote: > On Fri, Jun 06, 2014 at 09:14:01PM +0900, Magnus Damm wrote: >> On Fri, Jun 6, 2014 at 8:14 PM, Simon Horman <horms@verge.net.au> wrote: >> > On Fri, Jun 06, 2014 at 11:36:56AM +0100, Mark Brown wrote: >> >> From: Mark Brown <broonie@linaro.org> >> >> >> >> Since the OPP layer is a kernel library which has been converted to be >> >> directly selectable by its callers rather than user selectable and >> >> requiring architectures to enable it explicitly the ARCH_HAS_OPP symbol >> >> has become redundant and can be removed. Do so. >> >> >> >> Signed-off-by: Mark Brown <broonie@linaro.org> >> >> --- >> >> Documentation/power/opp.txt | 3 --- >> >> arch/arm/mach-exynos/Kconfig | 1 - >> >> arch/arm/mach-highbank/Kconfig | 1 - >> >> arch/arm/mach-imx/Kconfig | 1 - >> >> arch/arm/mach-omap2/Kconfig | 1 - >> >> arch/arm/mach-shmobile/Kconfig | 2 -- >> >> arch/arm/mach-vexpress/Kconfig | 1 - >> >> arch/arm/mach-zynq/Kconfig | 1 - >> >> drivers/devfreq/Kconfig | 1 - >> >> kernel/power/Kconfig | 3 --- >> >> 10 files changed, 15 deletions(-) >> > >> > shmobile portion: >> > >> > Acked-by: Simon Horman <horms+renesas@verge.net.au> >> >> Hi Simon, Mark, >> >> Nice to see cleanups in this area. Reducing the number of Kconfig >> symbols must be a good thing. >> >> I'm not sure about the expected merge order for this kind of change vs >> queued up stuff in the renesas git tree, but I believe the following >> patch selects ARCH_HAS_OPP: >> >> [PATCH v3] ARM: shmobile: Mark all SoCs in shmobile as CPUFreq, capable > > I propose that we fix that up by adding an incremental patch to > mach-shmobile via my renesas tree once the dependency (assuming there is > one) is in Linus's tree. Sounds good. Thanks! / magnus -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Jun 06, 2014 at 09:50:06PM +0900, Simon Horman wrote: > On Fri, Jun 06, 2014 at 09:14:01PM +0900, Magnus Damm wrote: > > I'm not sure about the expected merge order for this kind of change vs > > queued up stuff in the renesas git tree, but I believe the following > > patch selects ARCH_HAS_OPP: > > [PATCH v3] ARM: shmobile: Mark all SoCs in shmobile as CPUFreq, capable > I propose that we fix that up by adding an incremental patch to > mach-shmobile via my renesas tree once the dependency (assuming there is > one) is in Linus's tree. Yes, the conversion to make ARCH_HAS_OPP unused is in Raphael's tree for the merge window. I'd expect this patch to end up going after the merge window (or at the end I guess).
On Fri, Jun 6, 2014 at 5:36 AM, Mark Brown <broonie@kernel.org> wrote: > From: Mark Brown <broonie@linaro.org> > > Since the OPP layer is a kernel library which has been converted to be > directly selectable by its callers rather than user selectable and > requiring architectures to enable it explicitly the ARCH_HAS_OPP symbol > has become redundant and can be removed. Do so. > > Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Rob Herring <robh@kernel.org> > --- > Documentation/power/opp.txt | 3 --- > arch/arm/mach-exynos/Kconfig | 1 - > arch/arm/mach-highbank/Kconfig | 1 - > arch/arm/mach-imx/Kconfig | 1 - > arch/arm/mach-omap2/Kconfig | 1 - > arch/arm/mach-shmobile/Kconfig | 2 -- > arch/arm/mach-vexpress/Kconfig | 1 - > arch/arm/mach-zynq/Kconfig | 1 - > drivers/devfreq/Kconfig | 1 - > kernel/power/Kconfig | 3 --- > 10 files changed, 15 deletions(-) > > diff --git a/Documentation/power/opp.txt b/Documentation/power/opp.txt > index a9adad8..c6279c2 100644 > --- a/Documentation/power/opp.txt > +++ b/Documentation/power/opp.txt > @@ -51,9 +51,6 @@ Typical usage of the OPP library is as follows: > SoC framework -> modifies on required cases certain OPPs -> OPP layer > -> queries to search/retrieve information -> > > -Architectures that provide a SoC framework for OPP should select ARCH_HAS_OPP > -to make the OPP layer available. > - > OPP layer expects each domain to be represented by a unique device pointer. SoC > framework registers a set of initial OPPs per device with the OPP layer. This > list is expected to be an optimally small number typically around 5 per device. > diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig > index d58995c9..3f78c45 100644 > --- a/arch/arm/mach-exynos/Kconfig > +++ b/arch/arm/mach-exynos/Kconfig > @@ -103,7 +103,6 @@ config SOC_EXYNOS5440 > default y > depends on ARCH_EXYNOS5 > select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE > - select ARCH_HAS_OPP > select HAVE_ARM_ARCH_TIMER > select AUTO_ZRELADDR > select MIGHT_HAVE_PCI > diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig > index 830b76e..bef970f 100644 > --- a/arch/arm/mach-highbank/Kconfig > +++ b/arch/arm/mach-highbank/Kconfig > @@ -3,7 +3,6 @@ config ARCH_HIGHBANK > select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE > select ARCH_HAS_CPUFREQ > select ARCH_HAS_HOLES_MEMORYMODEL > - select ARCH_HAS_OPP > select ARCH_SUPPORTS_BIG_ENDIAN > select ARM_AMBA > select ARM_ERRATA_764369 if SMP > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig > index 4cce93d..95690e4 100644 > --- a/arch/arm/mach-imx/Kconfig > +++ b/arch/arm/mach-imx/Kconfig > @@ -1,7 +1,6 @@ > config ARCH_MXC > bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 > select ARCH_HAS_CPUFREQ > - select ARCH_HAS_OPP > select ARCH_REQUIRE_GPIOLIB > select ARM_CPU_SUSPEND if PM > select CLKSRC_MMIO > diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig > index 0ba4826..524b027 100644 > --- a/arch/arm/mach-omap2/Kconfig > +++ b/arch/arm/mach-omap2/Kconfig > @@ -12,7 +12,6 @@ config ARCH_OMAP3 > bool "TI OMAP3" > depends on ARCH_MULTI_V7 > select ARCH_OMAP2PLUS > - select ARCH_HAS_OPP > select ARM_CPU_SUSPEND if PM > select OMAP_INTERCONNECT > select PM_OPP if PM > diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig > index dbd954e..b51d142 100644 > --- a/arch/arm/mach-shmobile/Kconfig > +++ b/arch/arm/mach-shmobile/Kconfig > @@ -86,7 +86,6 @@ config ARCH_R8A73A4 > select SH_CLK_CPG > select RENESAS_IRQC > select ARCH_HAS_CPUFREQ > - select ARCH_HAS_OPP > select SYS_SUPPORTS_SH_CMT > select SYS_SUPPORTS_SH_TMU > > @@ -265,7 +264,6 @@ config MACH_KZM9G > bool "KZM-A9-GT board" > depends on ARCH_SH73A0 > select ARCH_HAS_CPUFREQ > - select ARCH_HAS_OPP > select ARCH_REQUIRE_GPIOLIB > select REGULATOR_FIXED_VOLTAGE if REGULATOR > select SND_SOC_AK4642 if SND_SIMPLE_CARD > diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig > index 90249cf..71629fe 100644 > --- a/arch/arm/mach-vexpress/Kconfig > +++ b/arch/arm/mach-vexpress/Kconfig > @@ -66,7 +66,6 @@ config ARCH_VEXPRESS_DCSCB > config ARCH_VEXPRESS_SPC > bool "Versatile Express Serial Power Controller (SPC)" > select ARCH_HAS_CPUFREQ > - select ARCH_HAS_OPP > select PM_OPP > help > The TC2 (A15x2 A7x3) versatile express core tile integrates a logic > diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig > index 573e0db..bc485f2 100644 > --- a/arch/arm/mach-zynq/Kconfig > +++ b/arch/arm/mach-zynq/Kconfig > @@ -1,7 +1,6 @@ > config ARCH_ZYNQ > bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7 > select ARCH_HAS_CPUFREQ > - select ARCH_HAS_OPP > select ARCH_SUPPORTS_BIG_ENDIAN > select ARM_AMBA > select ARM_GIC > diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig > index 49e74c1..3dced0a 100644 > --- a/drivers/devfreq/Kconfig > +++ b/drivers/devfreq/Kconfig > @@ -68,7 +68,6 @@ comment "DEVFREQ Drivers" > config ARM_EXYNOS4_BUS_DEVFREQ > bool "ARM Exynos4210/4212/4412 Memory Bus DEVFREQ Driver" > depends on (CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412) && !ARCH_MULTIPLATFORM > - select ARCH_HAS_OPP > select DEVFREQ_GOV_SIMPLE_ONDEMAND > select PM_OPP > help > diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig > index 9a83d78..e4e4121 100644 > --- a/kernel/power/Kconfig > +++ b/kernel/power/Kconfig > @@ -253,9 +253,6 @@ config APM_EMULATION > anything, try disabling/enabling this option (or disabling/enabling > APM in your BIOS). > > -config ARCH_HAS_OPP > - bool > - > config PM_OPP > bool > ---help--- > -- > 2.0.0 > -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 06/06/2014 05:36 AM, Mark Brown wrote: [...] > diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig > index 0ba4826..524b027 100644 > --- a/arch/arm/mach-omap2/Kconfig > +++ b/arch/arm/mach-omap2/Kconfig > @@ -12,7 +12,6 @@ config ARCH_OMAP3 > bool "TI OMAP3" > depends on ARCH_MULTI_V7 > select ARCH_OMAP2PLUS > - select ARCH_HAS_OPP > select ARM_CPU_SUSPEND if PM > select OMAP_INTERCONNECT > select PM_OPP if PM For OMAP portion: Acked-by: Nishanth Menon <nm@ti.com>
On Friday, June 06, 2014 02:08:50 PM Mark Brown wrote: > > --cU9XODsizZBnwgll > Content-Type: text/plain; charset=us-ascii > Content-Disposition: inline > > On Fri, Jun 06, 2014 at 09:50:06PM +0900, Simon Horman wrote: > > On Fri, Jun 06, 2014 at 09:14:01PM +0900, Magnus Damm wrote: > > > > I'm not sure about the expected merge order for this kind of change vs > > > queued up stuff in the renesas git tree, but I believe the following > > > patch selects ARCH_HAS_OPP: > > > > [PATCH v3] ARM: shmobile: Mark all SoCs in shmobile as CPUFreq, capable > > > I propose that we fix that up by adding an incremental patch to > > mach-shmobile via my renesas tree once the dependency (assuming there is > > one) is in Linus's tree. > > Yes, the conversion to make ARCH_HAS_OPP unused is in Raphael's tree for > the merge window. Perhaps already merged? Rafael -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Jun 06, 2014 at 11:36:56AM +0100, Mark Brown wrote: > From: Mark Brown <broonie@linaro.org> > > Since the OPP layer is a kernel library which has been converted to be > directly selectable by its callers rather than user selectable and > requiring architectures to enable it explicitly the ARCH_HAS_OPP symbol > has become redundant and can be removed. Do so. > > Signed-off-by: Mark Brown <broonie@linaro.org> > --- ... > arch/arm/mach-imx/Kconfig | 1 - Acked-by: Shawn Guo <shawn.guo@freescale.com> -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Jun 6, 2014 at 4:06 PM, Mark Brown <broonie@kernel.org> wrote: > From: Mark Brown <broonie@linaro.org> > > Since the OPP layer is a kernel library which has been converted to be > directly selectable by its callers rather than user selectable and > requiring architectures to enable it explicitly the ARCH_HAS_OPP symbol > has become redundant and can be removed. Do so. > > Signed-off-by: Mark Brown <broonie@linaro.org> > --- > Documentation/power/opp.txt | 3 --- > arch/arm/mach-exynos/Kconfig | 1 - > arch/arm/mach-highbank/Kconfig | 1 - > arch/arm/mach-imx/Kconfig | 1 - > arch/arm/mach-omap2/Kconfig | 1 - > arch/arm/mach-shmobile/Kconfig | 2 -- > arch/arm/mach-vexpress/Kconfig | 1 - > arch/arm/mach-zynq/Kconfig | 1 - > drivers/devfreq/Kconfig | 1 - > kernel/power/Kconfig | 3 --- > 10 files changed, 15 deletions(-) Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Jun 06, 2014 at 11:15:06PM +0200, Rafael J. Wysocki wrote: > On Friday, June 06, 2014 02:08:50 PM Mark Brown wrote: > > Yes, the conversion to make ARCH_HAS_OPP unused is in Raphael's tree for > > the merge window. > Perhaps already merged? Yes, looks like it is.
On Monday, June 09, 2014 08:49:17 PM Mark Brown wrote: > On Fri, Jun 06, 2014 at 11:15:06PM +0200, Rafael J. Wysocki wrote: > > On Friday, June 06, 2014 02:08:50 PM Mark Brown wrote: > > > > Yes, the conversion to make ARCH_HAS_OPP unused is in Raphael's tree for > > > the merge window. > > > Perhaps already merged? > > Yes, looks like it is. But it doesn't apply for me on top of the current Linus' tree. Can you please rebase? Rafael
On Tue, Jun 10, 2014 at 12:22:07AM +0200, Rafael J. Wysocki wrote: > On Monday, June 09, 2014 08:49:17 PM Mark Brown wrote: > > Yes, looks like it is. > But it doesn't apply for me on top of the current Linus' tree. > Can you please rebase? It probably depends on other people's trees too, I just killed all the usages in -next - I gather the SH trees added some new ones for example. I'd expect it'll apply after the merge window, if not that's the time to look at it.
On Monday, June 09, 2014 11:51:42 PM Mark Brown wrote: > > --fYgRtaZIy+F1uhp1 > Content-Type: text/plain; charset=us-ascii > Content-Disposition: inline > > On Tue, Jun 10, 2014 at 12:22:07AM +0200, Rafael J. Wysocki wrote: > > On Monday, June 09, 2014 08:49:17 PM Mark Brown wrote: > > > > Yes, looks like it is. > > > But it doesn't apply for me on top of the current Linus' tree. > > > Can you please rebase? > > It probably depends on other people's trees too, I just killed all the > usages in -next - I gather the SH trees added some new ones for example. > I'd expect it'll apply after the merge window, if not that's the time to > look at it. OK -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/power/opp.txt b/Documentation/power/opp.txt index a9adad8..c6279c2 100644 --- a/Documentation/power/opp.txt +++ b/Documentation/power/opp.txt @@ -51,9 +51,6 @@ Typical usage of the OPP library is as follows: SoC framework -> modifies on required cases certain OPPs -> OPP layer -> queries to search/retrieve information -> -Architectures that provide a SoC framework for OPP should select ARCH_HAS_OPP -to make the OPP layer available. - OPP layer expects each domain to be represented by a unique device pointer. SoC framework registers a set of initial OPPs per device with the OPP layer. This list is expected to be an optimally small number typically around 5 per device. diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index d58995c9..3f78c45 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -103,7 +103,6 @@ config SOC_EXYNOS5440 default y depends on ARCH_EXYNOS5 select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE - select ARCH_HAS_OPP select HAVE_ARM_ARCH_TIMER select AUTO_ZRELADDR select MIGHT_HAVE_PCI diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig index 830b76e..bef970f 100644 --- a/arch/arm/mach-highbank/Kconfig +++ b/arch/arm/mach-highbank/Kconfig @@ -3,7 +3,6 @@ config ARCH_HIGHBANK select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL - select ARCH_HAS_OPP select ARCH_SUPPORTS_BIG_ENDIAN select ARM_AMBA select ARM_ERRATA_764369 if SMP diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 4cce93d..95690e4 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -1,7 +1,6 @@ config ARCH_MXC bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 select ARCH_HAS_CPUFREQ - select ARCH_HAS_OPP select ARCH_REQUIRE_GPIOLIB select ARM_CPU_SUSPEND if PM select CLKSRC_MMIO diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 0ba4826..524b027 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -12,7 +12,6 @@ config ARCH_OMAP3 bool "TI OMAP3" depends on ARCH_MULTI_V7 select ARCH_OMAP2PLUS - select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM select OMAP_INTERCONNECT select PM_OPP if PM diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index dbd954e..b51d142 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -86,7 +86,6 @@ config ARCH_R8A73A4 select SH_CLK_CPG select RENESAS_IRQC select ARCH_HAS_CPUFREQ - select ARCH_HAS_OPP select SYS_SUPPORTS_SH_CMT select SYS_SUPPORTS_SH_TMU @@ -265,7 +264,6 @@ config MACH_KZM9G bool "KZM-A9-GT board" depends on ARCH_SH73A0 select ARCH_HAS_CPUFREQ - select ARCH_HAS_OPP select ARCH_REQUIRE_GPIOLIB select REGULATOR_FIXED_VOLTAGE if REGULATOR select SND_SOC_AK4642 if SND_SIMPLE_CARD diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 90249cf..71629fe 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -66,7 +66,6 @@ config ARCH_VEXPRESS_DCSCB config ARCH_VEXPRESS_SPC bool "Versatile Express Serial Power Controller (SPC)" select ARCH_HAS_CPUFREQ - select ARCH_HAS_OPP select PM_OPP help The TC2 (A15x2 A7x3) versatile express core tile integrates a logic diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig index 573e0db..bc485f2 100644 --- a/arch/arm/mach-zynq/Kconfig +++ b/arch/arm/mach-zynq/Kconfig @@ -1,7 +1,6 @@ config ARCH_ZYNQ bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7 select ARCH_HAS_CPUFREQ - select ARCH_HAS_OPP select ARCH_SUPPORTS_BIG_ENDIAN select ARM_AMBA select ARM_GIC diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig index 49e74c1..3dced0a 100644 --- a/drivers/devfreq/Kconfig +++ b/drivers/devfreq/Kconfig @@ -68,7 +68,6 @@ comment "DEVFREQ Drivers" config ARM_EXYNOS4_BUS_DEVFREQ bool "ARM Exynos4210/4212/4412 Memory Bus DEVFREQ Driver" depends on (CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412) && !ARCH_MULTIPLATFORM - select ARCH_HAS_OPP select DEVFREQ_GOV_SIMPLE_ONDEMAND select PM_OPP help diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig index 9a83d78..e4e4121 100644 --- a/kernel/power/Kconfig +++ b/kernel/power/Kconfig @@ -253,9 +253,6 @@ config APM_EMULATION anything, try disabling/enabling this option (or disabling/enabling APM in your BIOS). -config ARCH_HAS_OPP - bool - config PM_OPP bool ---help---