| Message ID | 1402574007-13987-4-git-send-email-r.sricharan@ti.com |
|---|---|
| State | New |
| Headers | show |
On Thu, Jun 12, 2014 at 05:23:11PM +0530, Sricharan R wrote: > From: Nishanth Menon <nm@ti.com> > > When, in the system due to varied reasons, interrupts might be unusable > due to hardware behavior, but register maps do exist, then those interrupts > should be skipped while mapping irq to crossbars. > > Signed-off-by: Nishanth Menon <nm@ti.com> > Signed-off-by: Sricharan R <r.sricharan@ti.com> > Signed-off-by: Tony Lindgren <tony@atomide.com> Tony, have you applied these somewhere already? > --- > drivers/irqchip/irq-crossbar.c | 47 ++++++++++++++++++++++++++++++++++++---- > 1 file changed, 43 insertions(+), 4 deletions(-) > > diff --git a/drivers/irqchip/irq-crossbar.c b/drivers/irqchip/irq-crossbar.c > index 51d4b87..847f6e3 100644 > --- a/drivers/irqchip/irq-crossbar.c > +++ b/drivers/irqchip/irq-crossbar.c > @@ -13,11 +13,13 @@ > #include <linux/io.h> > #include <linux/of_address.h> > #include <linux/of_irq.h> > +#include <linux/of_device.h> > #include <linux/slab.h> > #include <linux/irqchip/arm-gic.h> > > #define IRQ_FREE -1 > #define IRQ_RESERVED -2 > +#define IRQ_SKIP -3 > #define GIC_IRQ_START 32 > > /* > @@ -34,6 +36,16 @@ struct crossbar_device { > void (*write) (int, int); > }; > > +/** > + * struct crossbar_data: Platform specific data > + * @irqs_unused: array of irqs that cannot be used because of hw erratas > + * @size: size of the irqs_unused array > + */ > +struct crossbar_data { > + const uint *irqs_unused; > + const uint size; > +}; > + > static struct crossbar_device *cb; > > static inline void crossbar_writel(int irq_no, int cb_no) > @@ -119,10 +131,12 @@ const struct irq_domain_ops routable_irq_domain_ops = { > .xlate = crossbar_domain_xlate > }; > > -static int __init crossbar_of_init(struct device_node *node) > +static int __init crossbar_of_init(struct device_node *node, > + const struct crossbar_data *data) > { > int i, size, max, reserved = 0, entry; > const __be32 *irqsr; > + const int *irqsk = NULL; > > cb = kzalloc(sizeof(*cb), GFP_KERNEL); > > @@ -194,6 +208,22 @@ static int __init crossbar_of_init(struct device_node *node) > reserved += size; > } > > + /* Skip the ones marked as unused */ > + if (data) { > + irqsk = data->irqs_unused; > + size = data->size; > + > + for (i = 0; i < size; i++) { > + entry = irqsk[i]; > + > + if (entry > max) { > + pr_err("Invalid skip entry\n"); > + goto err3; > + } > + cb->irq_map[entry] = IRQ_SKIP; > + } > + } > + > register_routable_domain_ops(&routable_irq_domain_ops); > return 0; > > @@ -208,18 +238,27 @@ err1: > return -ENOMEM; > } > > +/* irq number 10 cannot be used because of hw bug */ > +int dra_irqs_unused[] = { 10 }; > +struct crossbar_data cb_dra_data = { dra_irqs_unused, > + ARRAY_SIZE(dra_irqs_unused) }; > + > static const struct of_device_id crossbar_match[] __initconst = { > - { .compatible = "ti,irq-crossbar" }, > + { .compatible = "ti,irq-crossbar", .data = &cb_dra_data }, > {} > }; This is a bug in all implementations of this IP? Or, a specific SoC's implementation? Would this be better expressed in the dts via a property? Can we expect future implementations to be fixed? thx, Jason. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Jason, On Thursday 12 June 2014 06:21 PM, Jason Cooper wrote: > On Thu, Jun 12, 2014 at 05:23:11PM +0530, Sricharan R wrote: >> From: Nishanth Menon <nm@ti.com> >> >> When, in the system due to varied reasons, interrupts might be unusable >> due to hardware behavior, but register maps do exist, then those interrupts >> should be skipped while mapping irq to crossbars. >> >> Signed-off-by: Nishanth Menon <nm@ti.com> >> Signed-off-by: Sricharan R <r.sricharan@ti.com> >> Signed-off-by: Tony Lindgren <tony@atomide.com> > > Tony, have you applied these somewhere already? > >> --- >> drivers/irqchip/irq-crossbar.c | 47 ++++++++++++++++++++++++++++++++++++---- >> 1 file changed, 43 insertions(+), 4 deletions(-) >> >> diff --git a/drivers/irqchip/irq-crossbar.c b/drivers/irqchip/irq-crossbar.c >> index 51d4b87..847f6e3 100644 >> --- a/drivers/irqchip/irq-crossbar.c >> +++ b/drivers/irqchip/irq-crossbar.c >> @@ -13,11 +13,13 @@ >> #include <linux/io.h> >> #include <linux/of_address.h> >> #include <linux/of_irq.h> >> +#include <linux/of_device.h> >> #include <linux/slab.h> >> #include <linux/irqchip/arm-gic.h> >> >> #define IRQ_FREE -1 >> #define IRQ_RESERVED -2 >> +#define IRQ_SKIP -3 >> #define GIC_IRQ_START 32 >> >> /* >> @@ -34,6 +36,16 @@ struct crossbar_device { >> void (*write) (int, int); >> }; >> >> +/** >> + * struct crossbar_data: Platform specific data >> + * @irqs_unused: array of irqs that cannot be used because of hw erratas >> + * @size: size of the irqs_unused array >> + */ >> +struct crossbar_data { >> + const uint *irqs_unused; >> + const uint size; >> +}; >> + >> static struct crossbar_device *cb; >> >> static inline void crossbar_writel(int irq_no, int cb_no) >> @@ -119,10 +131,12 @@ const struct irq_domain_ops routable_irq_domain_ops = { >> .xlate = crossbar_domain_xlate >> }; >> >> -static int __init crossbar_of_init(struct device_node *node) >> +static int __init crossbar_of_init(struct device_node *node, >> + const struct crossbar_data *data) >> { >> int i, size, max, reserved = 0, entry; >> const __be32 *irqsr; >> + const int *irqsk = NULL; >> >> cb = kzalloc(sizeof(*cb), GFP_KERNEL); >> >> @@ -194,6 +208,22 @@ static int __init crossbar_of_init(struct device_node *node) >> reserved += size; >> } >> >> + /* Skip the ones marked as unused */ >> + if (data) { >> + irqsk = data->irqs_unused; >> + size = data->size; >> + >> + for (i = 0; i < size; i++) { >> + entry = irqsk[i]; >> + >> + if (entry > max) { >> + pr_err("Invalid skip entry\n"); >> + goto err3; >> + } >> + cb->irq_map[entry] = IRQ_SKIP; >> + } >> + } >> + >> register_routable_domain_ops(&routable_irq_domain_ops); >> return 0; >> >> @@ -208,18 +238,27 @@ err1: >> return -ENOMEM; >> } >> >> +/* irq number 10 cannot be used because of hw bug */ >> +int dra_irqs_unused[] = { 10 }; >> +struct crossbar_data cb_dra_data = { dra_irqs_unused, >> + ARRAY_SIZE(dra_irqs_unused) }; >> + >> static const struct of_device_id crossbar_match[] __initconst = { >> - { .compatible = "ti,irq-crossbar" }, >> + { .compatible = "ti,irq-crossbar", .data = &cb_dra_data }, >> {} >> }; > > This is a bug in all implementations of this IP? Or, a specific > SoC's implementation? Would this be better expressed in the dts via a > property? Can we expect future implementations to be fixed? > > thx, > > Jason. Infact this and PATCH#10 should be merged. I will change that. So in Socs's (2 so far) that do have a crossbar, some irqs are mapped through a crossbar and some are directly wired to the irqchip. These 'unused irqs' are those which are directly wired but they still have a crossbar register. Their routing cannot be changed. So this is not really expected usage of the crossbar hw ip. We initially thought having a dts property separately for this, but took this path to avoid loading the dts with additional bindings which may not be generic. Regards, Sricharan -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
* Jason Cooper <jason@lakedaemon.net> [140612 05:52]: > On Thu, Jun 12, 2014 at 05:23:11PM +0530, Sricharan R wrote: > > From: Nishanth Menon <nm@ti.com> > > > > When, in the system due to varied reasons, interrupts might be unusable > > due to hardware behavior, but register maps do exist, then those interrupts > > should be skipped while mapping irq to crossbars. > > > > Signed-off-by: Nishanth Menon <nm@ti.com> > > Signed-off-by: Sricharan R <r.sricharan@ti.com> > > Signed-off-by: Tony Lindgren <tony@atomide.com> > > Tony, have you applied these somewhere already? I think some of these I had applied into a branch ready for merging but then it was discovered that further changes were needed and the branch was dropped. Sricharan, please remove my Signed-off-by from this series. If I end up applying it for merging my scripts will add it automatically. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Jun 12, 2014 at 06:57:15AM -0700, Tony Lindgren wrote: > * Jason Cooper <jason@lakedaemon.net> [140612 05:52]: > > On Thu, Jun 12, 2014 at 05:23:11PM +0530, Sricharan R wrote: > > > From: Nishanth Menon <nm@ti.com> > > > > > > When, in the system due to varied reasons, interrupts might be unusable > > > due to hardware behavior, but register maps do exist, then those interrupts > > > should be skipped while mapping irq to crossbars. > > > > > > Signed-off-by: Nishanth Menon <nm@ti.com> > > > Signed-off-by: Sricharan R <r.sricharan@ti.com> > > > Signed-off-by: Tony Lindgren <tony@atomide.com> > > > > Tony, have you applied these somewhere already? > > I think some of these I had applied into a branch ready for > merging but then it was discovered that further changes > were needed and the branch was dropped. Ok. > Sricharan, please remove my Signed-off-by from this series. > If I end up applying it for merging my scripts will add it > automatically. Do you have other changes outside of irqchip depending on this series? If so, I can set up a topic branch for you guys to base off of. Otherwise, I'll just apply them to irqchip/core when they're ready. Also, Sricharan, when you respin this, please clearly identify (in the comment section) those patches that need to be flagged for stable. It would be helpful if they were the first patches in the series as well. thx, Jason. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Jun 12, 2014 at 06:49:17PM +0530, Sricharan R wrote: > Hi Jason, > > On Thursday 12 June 2014 06:21 PM, Jason Cooper wrote: > > On Thu, Jun 12, 2014 at 05:23:11PM +0530, Sricharan R wrote: > >> From: Nishanth Menon <nm@ti.com> > >> > >> When, in the system due to varied reasons, interrupts might be unusable > >> due to hardware behavior, but register maps do exist, then those interrupts > >> should be skipped while mapping irq to crossbars. > >> > >> Signed-off-by: Nishanth Menon <nm@ti.com> > >> Signed-off-by: Sricharan R <r.sricharan@ti.com> > >> Signed-off-by: Tony Lindgren <tony@atomide.com> > > > > Tony, have you applied these somewhere already? > > > >> --- > >> drivers/irqchip/irq-crossbar.c | 47 ++++++++++++++++++++++++++++++++++++---- > >> 1 file changed, 43 insertions(+), 4 deletions(-) > >> > >> diff --git a/drivers/irqchip/irq-crossbar.c b/drivers/irqchip/irq-crossbar.c > >> index 51d4b87..847f6e3 100644 > >> --- a/drivers/irqchip/irq-crossbar.c > >> +++ b/drivers/irqchip/irq-crossbar.c > >> @@ -13,11 +13,13 @@ > >> #include <linux/io.h> > >> #include <linux/of_address.h> > >> #include <linux/of_irq.h> > >> +#include <linux/of_device.h> > >> #include <linux/slab.h> > >> #include <linux/irqchip/arm-gic.h> > >> > >> #define IRQ_FREE -1 > >> #define IRQ_RESERVED -2 > >> +#define IRQ_SKIP -3 > >> #define GIC_IRQ_START 32 > >> > >> /* > >> @@ -34,6 +36,16 @@ struct crossbar_device { > >> void (*write) (int, int); > >> }; > >> > >> +/** > >> + * struct crossbar_data: Platform specific data > >> + * @irqs_unused: array of irqs that cannot be used because of hw erratas > >> + * @size: size of the irqs_unused array > >> + */ > >> +struct crossbar_data { > >> + const uint *irqs_unused; > >> + const uint size; > >> +}; > >> + > >> static struct crossbar_device *cb; > >> > >> static inline void crossbar_writel(int irq_no, int cb_no) > >> @@ -119,10 +131,12 @@ const struct irq_domain_ops routable_irq_domain_ops = { > >> .xlate = crossbar_domain_xlate > >> }; > >> > >> -static int __init crossbar_of_init(struct device_node *node) > >> +static int __init crossbar_of_init(struct device_node *node, > >> + const struct crossbar_data *data) > >> { > >> int i, size, max, reserved = 0, entry; > >> const __be32 *irqsr; > >> + const int *irqsk = NULL; > >> > >> cb = kzalloc(sizeof(*cb), GFP_KERNEL); > >> > >> @@ -194,6 +208,22 @@ static int __init crossbar_of_init(struct device_node *node) > >> reserved += size; > >> } > >> > >> + /* Skip the ones marked as unused */ > >> + if (data) { > >> + irqsk = data->irqs_unused; > >> + size = data->size; > >> + > >> + for (i = 0; i < size; i++) { > >> + entry = irqsk[i]; > >> + > >> + if (entry > max) { > >> + pr_err("Invalid skip entry\n"); > >> + goto err3; > >> + } > >> + cb->irq_map[entry] = IRQ_SKIP; > >> + } > >> + } > >> + > >> register_routable_domain_ops(&routable_irq_domain_ops); > >> return 0; > >> > >> @@ -208,18 +238,27 @@ err1: > >> return -ENOMEM; > >> } > >> > >> +/* irq number 10 cannot be used because of hw bug */ > >> +int dra_irqs_unused[] = { 10 }; > >> +struct crossbar_data cb_dra_data = { dra_irqs_unused, > >> + ARRAY_SIZE(dra_irqs_unused) }; > >> + > >> static const struct of_device_id crossbar_match[] __initconst = { > >> - { .compatible = "ti,irq-crossbar" }, > >> + { .compatible = "ti,irq-crossbar", .data = &cb_dra_data }, > >> {} > >> }; > > > > This is a bug in all implementations of this IP? Or, a specific > > SoC's implementation? Would this be better expressed in the dts via a > > property? Can we expect future implementations to be fixed? > > > > thx, > > > > Jason. > Infact this and PATCH#10 should be merged. I will change that. > > So in Socs's (2 so far) that do have a crossbar, some irqs are mapped > through a crossbar and some are directly wired to the irqchip. > These 'unused irqs' are those which are directly wired but they still > have a crossbar register. Their routing cannot be changed. So this > is not really expected usage of the crossbar hw ip. We initially thought > having a dts property separately for this, but took this path to avoid > loading the dts with additional bindings which may not be generic. How do you plan to handle future SoCs with this IP and possibly different hard-wired irqs? thx, Jason. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thursday 12 June 2014 07:27 PM, Tony Lindgren wrote: > * Jason Cooper <jason@lakedaemon.net> [140612 05:52]: >> On Thu, Jun 12, 2014 at 05:23:11PM +0530, Sricharan R wrote: >>> From: Nishanth Menon <nm@ti.com> >>> >>> When, in the system due to varied reasons, interrupts might be unusable >>> due to hardware behavior, but register maps do exist, then those interrupts >>> should be skipped while mapping irq to crossbars. >>> >>> Signed-off-by: Nishanth Menon <nm@ti.com> >>> Signed-off-by: Sricharan R <r.sricharan@ti.com> >>> Signed-off-by: Tony Lindgren <tony@atomide.com> >> >> Tony, have you applied these somewhere already? > > I think some of these I had applied into a branch ready for > merging but then it was discovered that further changes > were needed and the branch was dropped. > > Sricharan, please remove my Signed-off-by from this series. > If I end up applying it for merging my scripts will add it > automatically. > Ok, will remove it. Regards, Sricharan -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Jason, On Thursday 12 June 2014 07:37 PM, Jason Cooper wrote: > On Thu, Jun 12, 2014 at 06:49:17PM +0530, Sricharan R wrote: >> Hi Jason, >> >> On Thursday 12 June 2014 06:21 PM, Jason Cooper wrote: >>> On Thu, Jun 12, 2014 at 05:23:11PM +0530, Sricharan R wrote: >>>> From: Nishanth Menon <nm@ti.com> >>>> >>>> When, in the system due to varied reasons, interrupts might be unusable >>>> due to hardware behavior, but register maps do exist, then those interrupts >>>> should be skipped while mapping irq to crossbars. >>>> >>>> Signed-off-by: Nishanth Menon <nm@ti.com> >>>> Signed-off-by: Sricharan R <r.sricharan@ti.com> >>>> Signed-off-by: Tony Lindgren <tony@atomide.com> >>> >>> Tony, have you applied these somewhere already? >>> >>>> --- >>>> drivers/irqchip/irq-crossbar.c | 47 ++++++++++++++++++++++++++++++++++++---- >>>> 1 file changed, 43 insertions(+), 4 deletions(-) >>>> >>>> diff --git a/drivers/irqchip/irq-crossbar.c b/drivers/irqchip/irq-crossbar.c >>>> index 51d4b87..847f6e3 100644 >>>> --- a/drivers/irqchip/irq-crossbar.c >>>> +++ b/drivers/irqchip/irq-crossbar.c >>>> @@ -13,11 +13,13 @@ >>>> #include <linux/io.h> >>>> #include <linux/of_address.h> >>>> #include <linux/of_irq.h> >>>> +#include <linux/of_device.h> >>>> #include <linux/slab.h> >>>> #include <linux/irqchip/arm-gic.h> >>>> >>>> #define IRQ_FREE -1 >>>> #define IRQ_RESERVED -2 >>>> +#define IRQ_SKIP -3 >>>> #define GIC_IRQ_START 32 >>>> >>>> /* >>>> @@ -34,6 +36,16 @@ struct crossbar_device { >>>> void (*write) (int, int); >>>> }; >>>> >>>> +/** >>>> + * struct crossbar_data: Platform specific data >>>> + * @irqs_unused: array of irqs that cannot be used because of hw erratas >>>> + * @size: size of the irqs_unused array >>>> + */ >>>> +struct crossbar_data { >>>> + const uint *irqs_unused; >>>> + const uint size; >>>> +}; >>>> + >>>> static struct crossbar_device *cb; >>>> >>>> static inline void crossbar_writel(int irq_no, int cb_no) >>>> @@ -119,10 +131,12 @@ const struct irq_domain_ops routable_irq_domain_ops = { >>>> .xlate = crossbar_domain_xlate >>>> }; >>>> >>>> -static int __init crossbar_of_init(struct device_node *node) >>>> +static int __init crossbar_of_init(struct device_node *node, >>>> + const struct crossbar_data *data) >>>> { >>>> int i, size, max, reserved = 0, entry; >>>> const __be32 *irqsr; >>>> + const int *irqsk = NULL; >>>> >>>> cb = kzalloc(sizeof(*cb), GFP_KERNEL); >>>> >>>> @@ -194,6 +208,22 @@ static int __init crossbar_of_init(struct device_node *node) >>>> reserved += size; >>>> } >>>> >>>> + /* Skip the ones marked as unused */ >>>> + if (data) { >>>> + irqsk = data->irqs_unused; >>>> + size = data->size; >>>> + >>>> + for (i = 0; i < size; i++) { >>>> + entry = irqsk[i]; >>>> + >>>> + if (entry > max) { >>>> + pr_err("Invalid skip entry\n"); >>>> + goto err3; >>>> + } >>>> + cb->irq_map[entry] = IRQ_SKIP; >>>> + } >>>> + } >>>> + >>>> register_routable_domain_ops(&routable_irq_domain_ops); >>>> return 0; >>>> >>>> @@ -208,18 +238,27 @@ err1: >>>> return -ENOMEM; >>>> } >>>> >>>> +/* irq number 10 cannot be used because of hw bug */ >>>> +int dra_irqs_unused[] = { 10 }; >>>> +struct crossbar_data cb_dra_data = { dra_irqs_unused, >>>> + ARRAY_SIZE(dra_irqs_unused) }; >>>> + >>>> static const struct of_device_id crossbar_match[] __initconst = { >>>> - { .compatible = "ti,irq-crossbar" }, >>>> + { .compatible = "ti,irq-crossbar", .data = &cb_dra_data }, >>>> {} >>>> }; >>> >>> This is a bug in all implementations of this IP? Or, a specific >>> SoC's implementation? Would this be better expressed in the dts via a >>> property? Can we expect future implementations to be fixed? >>> >>> thx, >>> >>> Jason. >> Infact this and PATCH#10 should be merged. I will change that. >> >> So in Socs's (2 so far) that do have a crossbar, some irqs are mapped >> through a crossbar and some are directly wired to the irqchip. >> These 'unused irqs' are those which are directly wired but they still >> have a crossbar register. Their routing cannot be changed. So this >> is not really expected usage of the crossbar hw ip. We initially thought >> having a dts property separately for this, but took this path to avoid >> loading the dts with additional bindings which may not be generic. > > How do you plan to handle future SoCs with this IP and possibly > different hard-wired irqs? Yes, that would require adding a new compatible in the above list and dts. So if adding a new binding in the dts would be cleaner, then i will change it that way. Regards, Sricharan -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Jason, On Thursday 12 June 2014 07:35 PM, Jason Cooper wrote: > On Thu, Jun 12, 2014 at 06:57:15AM -0700, Tony Lindgren wrote: >> * Jason Cooper <jason@lakedaemon.net> [140612 05:52]: >>> On Thu, Jun 12, 2014 at 05:23:11PM +0530, Sricharan R wrote: >>>> From: Nishanth Menon <nm@ti.com> >>>> >>>> When, in the system due to varied reasons, interrupts might be unusable >>>> due to hardware behavior, but register maps do exist, then those interrupts >>>> should be skipped while mapping irq to crossbars. >>>> >>>> Signed-off-by: Nishanth Menon <nm@ti.com> >>>> Signed-off-by: Sricharan R <r.sricharan@ti.com> >>>> Signed-off-by: Tony Lindgren <tony@atomide.com> >>> >>> Tony, have you applied these somewhere already? >> >> I think some of these I had applied into a branch ready for >> merging but then it was discovered that further changes >> were needed and the branch was dropped. > > Ok. > >> Sricharan, please remove my Signed-off-by from this series. >> If I end up applying it for merging my scripts will add it >> automatically. > > Do you have other changes outside of irqchip depending on this series? > If so, I can set up a topic branch for you guys to base off of. > Otherwise, I'll just apply them to irqchip/core when they're ready. > There are dts changes which are dependent upon this series. http://www.spinics.net/lists/linux-omap/msg108116.html > Also, Sricharan, when you respin this, please clearly identify (in the > comment section) those patches that need to be flagged for stable. It > would be helpful if they were the first patches in the series as well. Ok, i will point this out clearly. Regards, Sricharan -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Friday 13 June 2014 12:26 PM, Sricharan R wrote: > Hi Jason, > > On Thursday 12 June 2014 07:35 PM, Jason Cooper wrote: >> On Thu, Jun 12, 2014 at 06:57:15AM -0700, Tony Lindgren wrote: >>> * Jason Cooper <jason@lakedaemon.net> [140612 05:52]: >>>> On Thu, Jun 12, 2014 at 05:23:11PM +0530, Sricharan R wrote: >>>>> From: Nishanth Menon <nm@ti.com> >>>>> >>>>> When, in the system due to varied reasons, interrupts might be unusable >>>>> due to hardware behavior, but register maps do exist, then those interrupts >>>>> should be skipped while mapping irq to crossbars. >>>>> >>>>> Signed-off-by: Nishanth Menon <nm@ti.com> >>>>> Signed-off-by: Sricharan R <r.sricharan@ti.com> >>>>> Signed-off-by: Tony Lindgren <tony@atomide.com> >>>> >>>> Tony, have you applied these somewhere already? >>> >>> I think some of these I had applied into a branch ready for >>> merging but then it was discovered that further changes >>> were needed and the branch was dropped. >> >> Ok. >> >>> Sricharan, please remove my Signed-off-by from this series. >>> If I end up applying it for merging my scripts will add it >>> automatically. >> >> Do you have other changes outside of irqchip depending on this series? >> If so, I can set up a topic branch for you guys to base off of. >> Otherwise, I'll just apply them to irqchip/core when they're ready. >> > There are dts changes which are dependent upon this series. > > http://www.spinics.net/lists/linux-omap/msg108116.html > >> Also, Sricharan, when you respin this, please clearly identify (in the >> comment section) those patches that need to be flagged for stable. It >> would be helpful if they were the first patches in the series as well. > > Ok, i will point this out clearly. Infact since the dts node is not present in the older kernel (even now), the driver itself is not used. So i feel there is nothing to be flagged for stable as such. Regards, Sricharan -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Jun 13, 2014 at 12:26:10PM +0530, Sricharan R wrote: > On Thursday 12 June 2014 07:35 PM, Jason Cooper wrote: ... > > Do you have other changes outside of irqchip depending on this series? > > If so, I can set up a topic branch for you guys to base off of. > > Otherwise, I'll just apply them to irqchip/core when they're ready. > > > There are dts changes which are dependent upon this series. > > http://www.spinics.net/lists/linux-omap/msg108116.html In general, dts changes shouldn't depend on code changes or vice-versa. If they do, that's an indicator that we're breaking compatibility with older dtbs. Looking at the dra7.dtsi changes, we're redefining the interrupt property, which can't be good. :( Perhaps a better solution would be to add a property, say 'ti,cross-irq' that is the exact same format as 'interrupts', but is used by the crossbar driver? I'm not convinced of this yet, I suspect we may not actually have a dependency between the dtsi changes and the code changes. We would have the ugly "if you have the crossbar node, 'interrupts' means X, if not it means Y" in the binding docs. But the absence of the node prevents the crossbar driver from re-interpreting the interrupts property. Have you tried booting all the different scenarios? eg: old dtb, new driver new dtb, old driver old dtb, old driver new dtb, new driver thx, Jason. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
On Fri, Jun 13, 2014 at 12:07:49PM +0530, Sricharan R wrote: > Hi Jason, > > On Thursday 12 June 2014 07:37 PM, Jason Cooper wrote: > > On Thu, Jun 12, 2014 at 06:49:17PM +0530, Sricharan R wrote: > >> Hi Jason, > >> > >> On Thursday 12 June 2014 06:21 PM, Jason Cooper wrote: > >>> On Thu, Jun 12, 2014 at 05:23:11PM +0530, Sricharan R wrote: > >>>> From: Nishanth Menon <nm@ti.com> > >>>> > >>>> When, in the system due to varied reasons, interrupts might be unusable > >>>> due to hardware behavior, but register maps do exist, then those interrupts > >>>> should be skipped while mapping irq to crossbars. > >>>> > >>>> Signed-off-by: Nishanth Menon <nm@ti.com> > >>>> Signed-off-by: Sricharan R <r.sricharan@ti.com> > >>>> Signed-off-by: Tony Lindgren <tony@atomide.com> > >>> > >>> Tony, have you applied these somewhere already? > >>> > >>>> --- > >>>> drivers/irqchip/irq-crossbar.c | 47 ++++++++++++++++++++++++++++++++++++---- > >>>> 1 file changed, 43 insertions(+), 4 deletions(-) > >>>> > >>>> diff --git a/drivers/irqchip/irq-crossbar.c b/drivers/irqchip/irq-crossbar.c > >>>> index 51d4b87..847f6e3 100644 > >>>> --- a/drivers/irqchip/irq-crossbar.c > >>>> +++ b/drivers/irqchip/irq-crossbar.c > >>>> @@ -13,11 +13,13 @@ > >>>> #include <linux/io.h> > >>>> #include <linux/of_address.h> > >>>> #include <linux/of_irq.h> > >>>> +#include <linux/of_device.h> > >>>> #include <linux/slab.h> > >>>> #include <linux/irqchip/arm-gic.h> > >>>> > >>>> #define IRQ_FREE -1 > >>>> #define IRQ_RESERVED -2 > >>>> +#define IRQ_SKIP -3 > >>>> #define GIC_IRQ_START 32 > >>>> > >>>> /* > >>>> @@ -34,6 +36,16 @@ struct crossbar_device { > >>>> void (*write) (int, int); > >>>> }; > >>>> > >>>> +/** > >>>> + * struct crossbar_data: Platform specific data > >>>> + * @irqs_unused: array of irqs that cannot be used because of hw erratas > >>>> + * @size: size of the irqs_unused array > >>>> + */ > >>>> +struct crossbar_data { > >>>> + const uint *irqs_unused; > >>>> + const uint size; > >>>> +}; > >>>> + > >>>> static struct crossbar_device *cb; > >>>> > >>>> static inline void crossbar_writel(int irq_no, int cb_no) > >>>> @@ -119,10 +131,12 @@ const struct irq_domain_ops routable_irq_domain_ops = { > >>>> .xlate = crossbar_domain_xlate > >>>> }; > >>>> > >>>> -static int __init crossbar_of_init(struct device_node *node) > >>>> +static int __init crossbar_of_init(struct device_node *node, > >>>> + const struct crossbar_data *data) > >>>> { > >>>> int i, size, max, reserved = 0, entry; > >>>> const __be32 *irqsr; > >>>> + const int *irqsk = NULL; > >>>> > >>>> cb = kzalloc(sizeof(*cb), GFP_KERNEL); > >>>> > >>>> @@ -194,6 +208,22 @@ static int __init crossbar_of_init(struct device_node *node) > >>>> reserved += size; > >>>> } > >>>> > >>>> + /* Skip the ones marked as unused */ > >>>> + if (data) { > >>>> + irqsk = data->irqs_unused; > >>>> + size = data->size; > >>>> + > >>>> + for (i = 0; i < size; i++) { > >>>> + entry = irqsk[i]; > >>>> + > >>>> + if (entry > max) { > >>>> + pr_err("Invalid skip entry\n"); > >>>> + goto err3; > >>>> + } > >>>> + cb->irq_map[entry] = IRQ_SKIP; > >>>> + } > >>>> + } > >>>> + > >>>> register_routable_domain_ops(&routable_irq_domain_ops); > >>>> return 0; > >>>> > >>>> @@ -208,18 +238,27 @@ err1: > >>>> return -ENOMEM; > >>>> } > >>>> > >>>> +/* irq number 10 cannot be used because of hw bug */ > >>>> +int dra_irqs_unused[] = { 10 }; > >>>> +struct crossbar_data cb_dra_data = { dra_irqs_unused, > >>>> + ARRAY_SIZE(dra_irqs_unused) }; > >>>> + > >>>> static const struct of_device_id crossbar_match[] __initconst = { > >>>> - { .compatible = "ti,irq-crossbar" }, > >>>> + { .compatible = "ti,irq-crossbar", .data = &cb_dra_data }, > >>>> {} > >>>> }; > >>> > >>> This is a bug in all implementations of this IP? Or, a specific > >>> SoC's implementation? Would this be better expressed in the dts via a > >>> property? Can we expect future implementations to be fixed? > >>> > >>> thx, > >>> > >>> Jason. > >> Infact this and PATCH#10 should be merged. I will change that. > >> > >> So in Socs's (2 so far) that do have a crossbar, some irqs are mapped > >> through a crossbar and some are directly wired to the irqchip. > >> These 'unused irqs' are those which are directly wired but they still > >> have a crossbar register. Their routing cannot be changed. So this > >> is not really expected usage of the crossbar hw ip. We initially thought > >> having a dts property separately for this, but took this path to avoid > >> loading the dts with additional bindings which may not be generic. > > > > How do you plan to handle future SoCs with this IP and possibly > > different hard-wired irqs? > Yes, that would require adding a new compatible in the above list and dts. > So if adding a new binding in the dts would be cleaner, then i will change > it that way. Yes, unless the DT maintainers have shot the idea down, I'd prefer to see a separate property. With the method you currently have, we'll have to change the compatible when the IP _hasn't_ changed, just because the SoC was wired differently. We could trigger on the SoC compatible and maintain a table, but that seems overly hacky when the dt is supposed to describe the hardware. thx, Jason. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Friday 13 June 2014 09:10 AM, Jason Cooper wrote: > On Fri, Jun 13, 2014 at 12:26:10PM +0530, Sricharan R wrote: >> On Thursday 12 June 2014 07:35 PM, Jason Cooper wrote: > ... >>> Do you have other changes outside of irqchip depending on this series? >>> If so, I can set up a topic branch for you guys to base off of. >>> Otherwise, I'll just apply them to irqchip/core when they're ready. >>> >> There are dts changes which are dependent upon this series. >> >> http://www.spinics.net/lists/linux-omap/msg108116.html > > In general, dts changes shouldn't depend on code changes or vice-versa. > If they do, that's an indicator that we're breaking compatibility with > older dtbs. > Thats true. The case with cross-bar though is the feature wasn't completly supported so far before this series. Perhaps the the initial bindings should have been marked unstable. > Looking at the dra7.dtsi changes, we're redefining the interrupt > property, which can't be good. :( > > Perhaps a better solution would be to add a property, say 'ti,cross-irq' > that is the exact same format as 'interrupts', but is used by the > crossbar driver? > We have gone over those earlier and it was agreed to re-use interrupt properties and for special cases, define a cross-bar property to describe it. > I'm not convinced of this yet, I suspect we may not actually have a > dependency between the dtsi changes and the code changes. We would have > the ugly "if you have the crossbar node, 'interrupts' means X, if not it > means Y" in the binding docs. But the absence of the node prevents the > crossbar driver from re-interpreting the interrupts property. > In ideal cross-bar hardware you don't need the assumption "if you have the crossbar node, 'interrupts' means X, if not it means Y" It is purely because the cross-bar irq router hardware has few nasty bugs which needs those special handling. And thats the reason, the property was added. > Have you tried booting all the different scenarios? eg: > > old dtb, new driver > new dtb, old driver > old dtb, old driver > new dtb, new driver > Old driver wasn't complete as mentioned and hence the above combinations becomes bit irrelevant. Regards, Santosh -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Jun 13, 2014 at 09:35:20AM -0400, Santosh Shilimkar wrote: > On Friday 13 June 2014 09:10 AM, Jason Cooper wrote: ... > > Have you tried booting all the different scenarios? eg: > > > > old dtb, new driver > > new dtb, old driver > > old dtb, old driver > > new dtb, new driver > > > Old driver wasn't complete as mentioned and hence the above > combinations becomes bit irrelevant. Ahh, great! In that case, I think we should be good without the dependency between the code changes and the dtsi changes. thx, Jason. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/irqchip/irq-crossbar.c b/drivers/irqchip/irq-crossbar.c index 51d4b87..847f6e3 100644 --- a/drivers/irqchip/irq-crossbar.c +++ b/drivers/irqchip/irq-crossbar.c @@ -13,11 +13,13 @@ #include <linux/io.h> #include <linux/of_address.h> #include <linux/of_irq.h> +#include <linux/of_device.h> #include <linux/slab.h> #include <linux/irqchip/arm-gic.h> #define IRQ_FREE -1 #define IRQ_RESERVED -2 +#define IRQ_SKIP -3 #define GIC_IRQ_START 32 /* @@ -34,6 +36,16 @@ struct crossbar_device { void (*write) (int, int); }; +/** + * struct crossbar_data: Platform specific data + * @irqs_unused: array of irqs that cannot be used because of hw erratas + * @size: size of the irqs_unused array + */ +struct crossbar_data { + const uint *irqs_unused; + const uint size; +}; + static struct crossbar_device *cb; static inline void crossbar_writel(int irq_no, int cb_no) @@ -119,10 +131,12 @@ const struct irq_domain_ops routable_irq_domain_ops = { .xlate = crossbar_domain_xlate }; -static int __init crossbar_of_init(struct device_node *node) +static int __init crossbar_of_init(struct device_node *node, + const struct crossbar_data *data) { int i, size, max, reserved = 0, entry; const __be32 *irqsr; + const int *irqsk = NULL; cb = kzalloc(sizeof(*cb), GFP_KERNEL); @@ -194,6 +208,22 @@ static int __init crossbar_of_init(struct device_node *node) reserved += size; } + /* Skip the ones marked as unused */ + if (data) { + irqsk = data->irqs_unused; + size = data->size; + + for (i = 0; i < size; i++) { + entry = irqsk[i]; + + if (entry > max) { + pr_err("Invalid skip entry\n"); + goto err3; + } + cb->irq_map[entry] = IRQ_SKIP; + } + } + register_routable_domain_ops(&routable_irq_domain_ops); return 0; @@ -208,18 +238,27 @@ err1: return -ENOMEM; } +/* irq number 10 cannot be used because of hw bug */ +int dra_irqs_unused[] = { 10 }; +struct crossbar_data cb_dra_data = { dra_irqs_unused, + ARRAY_SIZE(dra_irqs_unused) }; + static const struct of_device_id crossbar_match[] __initconst = { - { .compatible = "ti,irq-crossbar" }, + { .compatible = "ti,irq-crossbar", .data = &cb_dra_data }, {} }; int __init irqcrossbar_init(void) { struct device_node *np; - np = of_find_matching_node(NULL, crossbar_match); + const struct of_device_id *of_id; + const struct crossbar_data *cdata; + + np = of_find_matching_node_and_match(NULL, crossbar_match, &of_id); if (!np) return -ENODEV; - crossbar_of_init(np); + cdata = of_id->data; + crossbar_of_init(np, cdata); return 0; }