diff mbox

[RFC,1/6] arm/arm64: KVM: Rename irq_state to irq_pending

Message ID 1402779067-34478-2-git-send-email-christoffer.dall@linaro.org
State New
Headers show

Commit Message

Christoffer Dall June 14, 2014, 8:51 p.m. UTC
The irq_state field on the distributor struct is ambiguous in its
meaning; the comment says it's the level of the input put, but that
doesn't make much sense for edge-triggered interrupts.  The code
actually uses this state variable to check if the interrupt is in the
pending state on the distributor so clarify the comment and rename the
actual variable and accessor methods.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
---
 include/kvm/arm_vgic.h |  4 ++--
 virt/kvm/arm/vgic.c    | 52 +++++++++++++++++++++++++-------------------------
 2 files changed, 28 insertions(+), 28 deletions(-)

Comments

Auger Eric June 18, 2014, 2:30 p.m. UTC | #1
On 06/14/2014 10:51 PM, Christoffer Dall wrote:
> The irq_state field on the distributor struct is ambiguous in its
> meaning; the comment says it's the level of the input put, but that
> doesn't make much sense for edge-triggered interrupts.  The code
> actually uses this state variable to check if the interrupt is in the
> pending state on the distributor so clarify the comment and rename the
> actual variable and accessor methods.
> 
> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
> ---
>  include/kvm/arm_vgic.h |  4 ++--
>  virt/kvm/arm/vgic.c    | 52 +++++++++++++++++++++++++-------------------------
>  2 files changed, 28 insertions(+), 28 deletions(-)
> 
> diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
> index f27000f..a5d55d5 100644
> --- a/include/kvm/arm_vgic.h
> +++ b/include/kvm/arm_vgic.h
> @@ -86,8 +86,8 @@ struct vgic_dist {
>  	/* Interrupt enabled (one bit per IRQ) */
>  	struct vgic_bitmap	irq_enabled;
>  
> -	/* Interrupt 'pin' level */
> -	struct vgic_bitmap	irq_state;
> +	/* Interrupt state is pending on the distributor */
> +	struct vgic_bitmap	irq_pending;
>  
>  	/* Level-triggered interrupt in progress */
>  	struct vgic_bitmap	irq_active;
> diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
> index 47b2983..aba960a 100644
> --- a/virt/kvm/arm/vgic.c
> +++ b/virt/kvm/arm/vgic.c
> @@ -37,7 +37,7 @@
>   *
>   * - At any time, the dist->irq_pending_on_cpu is the oracle that knows if
>   *   something is pending
> - * - VGIC pending interrupts are stored on the vgic.irq_state vgic
> + * - VGIC pending interrupts are stored on the vgic.irq_pending vgic
>   *   bitmap (this bitmap is updated by both user land ioctls and guest
>   *   mmio ops, and other in-kernel peripherals such as the
>   *   arch. timers) and indicate the 'wire' state.
Hi Christoffer,

Shouldn't we say that vgic.irq_pending is a combination of wire state
and soft pending set action(ISPENDR), corresponding to GIC archi spec
"status_includes_pending" - at least for level sensitive IRQS - ?

Best Regards

Eric

> @@ -45,8 +45,8 @@
>   *   recalculated
>   * - To calculate the oracle, we need info for each cpu from
>   *   compute_pending_for_cpu, which considers:
> - *   - PPI: dist->irq_state & dist->irq_enable
> - *   - SPI: dist->irq_state & dist->irq_enable & dist->irq_spi_target
> + *   - PPI: dist->irq_pending & dist->irq_enable
> + *   - SPI: dist->irq_pending & dist->irq_enable & dist->irq_spi_target
>   *   - irq_spi_target is a 'formatted' version of the GICD_ICFGR
>   *     registers, stored on each vcpu. We only keep one bit of
>   *     information per interrupt, making sure that only one vcpu can
> @@ -204,21 +204,21 @@ static int vgic_dist_irq_is_pending(struct kvm_vcpu *vcpu, int irq)
>  {
>  	struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
>  
> -	return vgic_bitmap_get_irq_val(&dist->irq_state, vcpu->vcpu_id, irq);
> +	return vgic_bitmap_get_irq_val(&dist->irq_pending, vcpu->vcpu_id, irq);
>  }
>  
> -static void vgic_dist_irq_set(struct kvm_vcpu *vcpu, int irq)
> +static void vgic_dist_irq_set_pending(struct kvm_vcpu *vcpu, int irq)
>  {
>  	struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
>  
> -	vgic_bitmap_set_irq_val(&dist->irq_state, vcpu->vcpu_id, irq, 1);
> +	vgic_bitmap_set_irq_val(&dist->irq_pending, vcpu->vcpu_id, irq, 1);
>  }
>  
> -static void vgic_dist_irq_clear(struct kvm_vcpu *vcpu, int irq)
> +static void vgic_dist_irq_clear_pending(struct kvm_vcpu *vcpu, int irq)
>  {
>  	struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
>  
> -	vgic_bitmap_set_irq_val(&dist->irq_state, vcpu->vcpu_id, irq, 0);
> +	vgic_bitmap_set_irq_val(&dist->irq_pending, vcpu->vcpu_id, irq, 0);
>  }
>  
>  static void vgic_cpu_irq_set(struct kvm_vcpu *vcpu, int irq)
> @@ -392,7 +392,7 @@ static bool handle_mmio_set_pending_reg(struct kvm_vcpu *vcpu,
>  					struct kvm_exit_mmio *mmio,
>  					phys_addr_t offset)
>  {
> -	u32 *reg = vgic_bitmap_get_reg(&vcpu->kvm->arch.vgic.irq_state,
> +	u32 *reg = vgic_bitmap_get_reg(&vcpu->kvm->arch.vgic.irq_pending,
>  				       vcpu->vcpu_id, offset);
>  	vgic_reg_access(mmio, reg, offset,
>  			ACCESS_READ_VALUE | ACCESS_WRITE_SETBIT);
> @@ -408,7 +408,7 @@ static bool handle_mmio_clear_pending_reg(struct kvm_vcpu *vcpu,
>  					  struct kvm_exit_mmio *mmio,
>  					  phys_addr_t offset)
>  {
> -	u32 *reg = vgic_bitmap_get_reg(&vcpu->kvm->arch.vgic.irq_state,
> +	u32 *reg = vgic_bitmap_get_reg(&vcpu->kvm->arch.vgic.irq_pending,
>  				       vcpu->vcpu_id, offset);
>  	vgic_reg_access(mmio, reg, offset,
>  			ACCESS_READ_VALUE | ACCESS_WRITE_CLEARBIT);
> @@ -650,7 +650,7 @@ static void vgic_unqueue_irqs(struct kvm_vcpu *vcpu)
>  		 * is fine, then we are only setting a few bits that were
>  		 * already set.
>  		 */
> -		vgic_dist_irq_set(vcpu, irq);
> +		vgic_dist_irq_set_pending(vcpu, irq);
>  		if (irq < VGIC_NR_SGIS)
>  			dist->irq_sgi_sources[vcpu_id][irq] |= 1 << source_cpu;
>  		*lr &= ~GICH_LR_PENDING_BIT;
> @@ -929,7 +929,7 @@ static void vgic_dispatch_sgi(struct kvm_vcpu *vcpu, u32 reg)
>  	kvm_for_each_vcpu(c, vcpu, kvm) {
>  		if (target_cpus & 1) {
>  			/* Flag the SGI as pending */
> -			vgic_dist_irq_set(vcpu, sgi);
> +			vgic_dist_irq_set_pending(vcpu, sgi);
>  			dist->irq_sgi_sources[c][sgi] |= 1 << vcpu_id;
>  			kvm_debug("SGI%d from CPU%d to CPU%d\n", sgi, vcpu_id, c);
>  		}
> @@ -949,11 +949,11 @@ static int compute_pending_for_cpu(struct kvm_vcpu *vcpu)
>  	pend_percpu = vcpu->arch.vgic_cpu.pending_percpu;
>  	pend_shared = vcpu->arch.vgic_cpu.pending_shared;
>  
> -	pending = vgic_bitmap_get_cpu_map(&dist->irq_state, vcpu_id);
> +	pending = vgic_bitmap_get_cpu_map(&dist->irq_pending, vcpu_id);
>  	enabled = vgic_bitmap_get_cpu_map(&dist->irq_enabled, vcpu_id);
>  	bitmap_and(pend_percpu, pending, enabled, VGIC_NR_PRIVATE_IRQS);
>  
> -	pending = vgic_bitmap_get_shared_map(&dist->irq_state);
> +	pending = vgic_bitmap_get_shared_map(&dist->irq_pending);
>  	enabled = vgic_bitmap_get_shared_map(&dist->irq_enabled);
>  	bitmap_and(pend_shared, pending, enabled, VGIC_NR_SHARED_IRQS);
>  	bitmap_and(pend_shared, pend_shared,
> @@ -1085,7 +1085,7 @@ static bool vgic_queue_sgi(struct kvm_vcpu *vcpu, int irq)
>  	 * our emulated gic and can get rid of them.
>  	 */
>  	if (!sources) {
> -		vgic_dist_irq_clear(vcpu, irq);
> +		vgic_dist_irq_clear_pending(vcpu, irq);
>  		vgic_cpu_irq_clear(vcpu, irq);
>  		return true;
>  	}
> @@ -1100,7 +1100,7 @@ static bool vgic_queue_hwirq(struct kvm_vcpu *vcpu, int irq)
>  
>  	if (vgic_queue_irq(vcpu, 0, irq)) {
>  		if (vgic_irq_is_edge(vcpu, irq)) {
> -			vgic_dist_irq_clear(vcpu, irq);
> +			vgic_dist_irq_clear_pending(vcpu, irq);
>  			vgic_cpu_irq_clear(vcpu, irq);
>  		} else {
>  			vgic_irq_set_active(vcpu, irq);
> @@ -1297,7 +1297,7 @@ static void vgic_kick_vcpus(struct kvm *kvm)
>  
>  static int vgic_validate_injection(struct kvm_vcpu *vcpu, int irq, int level)
>  {
> -	int is_edge = vgic_irq_is_edge(vcpu, irq);
> +	int edge_triggered = vgic_irq_is_edge(vcpu, irq);
>  	int state = vgic_dist_irq_is_pending(vcpu, irq);
>  
>  	/*
> @@ -1305,26 +1305,26 @@ static int vgic_validate_injection(struct kvm_vcpu *vcpu, int irq, int level)
>  	 * - edge triggered and we have a rising edge
>  	 * - level triggered and we change level
>  	 */
> -	if (is_edge)
> +	if (edge_triggered)
>  		return level > state;
>  	else
>  		return level != state;
>  }
>  
> -static bool vgic_update_irq_state(struct kvm *kvm, int cpuid,
> +static bool vgic_update_irq_pending(struct kvm *kvm, int cpuid,
>  				  unsigned int irq_num, bool level)
>  {
>  	struct vgic_dist *dist = &kvm->arch.vgic;
>  	struct kvm_vcpu *vcpu;
> -	int is_edge, is_level;
> +	int edge_triggered, level_triggered;
>  	int enabled;
>  	bool ret = true;
>  
>  	spin_lock(&dist->lock);
>  
>  	vcpu = kvm_get_vcpu(kvm, cpuid);
> -	is_edge = vgic_irq_is_edge(vcpu, irq_num);
> -	is_level = !is_edge;
> +	edge_triggered = vgic_irq_is_edge(vcpu, irq_num);
> +	level_triggered = !edge_triggered;
>  
>  	if (!vgic_validate_injection(vcpu, irq_num, level)) {
>  		ret = false;
> @@ -1339,9 +1339,9 @@ static bool vgic_update_irq_state(struct kvm *kvm, int cpuid,
>  	kvm_debug("Inject IRQ%d level %d CPU%d\n", irq_num, level, cpuid);
>  
>  	if (level)
> -		vgic_dist_irq_set(vcpu, irq_num);
> +		vgic_dist_irq_set_pending(vcpu, irq_num);
>  	else
> -		vgic_dist_irq_clear(vcpu, irq_num);
> +		vgic_dist_irq_clear_pending(vcpu, irq_num);
>  
>  	enabled = vgic_irq_is_enabled(vcpu, irq_num);
>  
> @@ -1350,7 +1350,7 @@ static bool vgic_update_irq_state(struct kvm *kvm, int cpuid,
>  		goto out;
>  	}
>  
> -	if (is_level && vgic_irq_is_active(vcpu, irq_num)) {
> +	if (level_triggered && vgic_irq_is_active(vcpu, irq_num)) {
>  		/*
>  		 * Level interrupt in progress, will be picked up
>  		 * when EOId.
> @@ -1387,7 +1387,7 @@ out:
>  int kvm_vgic_inject_irq(struct kvm *kvm, int cpuid, unsigned int irq_num,
>  			bool level)
>  {
> -	if (vgic_update_irq_state(kvm, cpuid, irq_num, level))
> +	if (vgic_update_irq_pending(kvm, cpuid, irq_num, level))
>  		vgic_kick_vcpus(kvm);
>  
>  	return 0;
>
Marc Zyngier June 22, 2014, 11:20 a.m. UTC | #2
On 2014-06-14 21:51, Christoffer Dall wrote:
> The irq_state field on the distributor struct is ambiguous in its
> meaning; the comment says it's the level of the input put, but that
> doesn't make much sense for edge-triggered interrupts.  The code
> actually uses this state variable to check if the interrupt is in the
> pending state on the distributor so clarify the comment and rename 
> the
> actual variable and accessor methods.
>
> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

Looks good to me.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>

         M.
diff mbox

Patch

diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
index f27000f..a5d55d5 100644
--- a/include/kvm/arm_vgic.h
+++ b/include/kvm/arm_vgic.h
@@ -86,8 +86,8 @@  struct vgic_dist {
 	/* Interrupt enabled (one bit per IRQ) */
 	struct vgic_bitmap	irq_enabled;
 
-	/* Interrupt 'pin' level */
-	struct vgic_bitmap	irq_state;
+	/* Interrupt state is pending on the distributor */
+	struct vgic_bitmap	irq_pending;
 
 	/* Level-triggered interrupt in progress */
 	struct vgic_bitmap	irq_active;
diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
index 47b2983..aba960a 100644
--- a/virt/kvm/arm/vgic.c
+++ b/virt/kvm/arm/vgic.c
@@ -37,7 +37,7 @@ 
  *
  * - At any time, the dist->irq_pending_on_cpu is the oracle that knows if
  *   something is pending
- * - VGIC pending interrupts are stored on the vgic.irq_state vgic
+ * - VGIC pending interrupts are stored on the vgic.irq_pending vgic
  *   bitmap (this bitmap is updated by both user land ioctls and guest
  *   mmio ops, and other in-kernel peripherals such as the
  *   arch. timers) and indicate the 'wire' state.
@@ -45,8 +45,8 @@ 
  *   recalculated
  * - To calculate the oracle, we need info for each cpu from
  *   compute_pending_for_cpu, which considers:
- *   - PPI: dist->irq_state & dist->irq_enable
- *   - SPI: dist->irq_state & dist->irq_enable & dist->irq_spi_target
+ *   - PPI: dist->irq_pending & dist->irq_enable
+ *   - SPI: dist->irq_pending & dist->irq_enable & dist->irq_spi_target
  *   - irq_spi_target is a 'formatted' version of the GICD_ICFGR
  *     registers, stored on each vcpu. We only keep one bit of
  *     information per interrupt, making sure that only one vcpu can
@@ -204,21 +204,21 @@  static int vgic_dist_irq_is_pending(struct kvm_vcpu *vcpu, int irq)
 {
 	struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
 
-	return vgic_bitmap_get_irq_val(&dist->irq_state, vcpu->vcpu_id, irq);
+	return vgic_bitmap_get_irq_val(&dist->irq_pending, vcpu->vcpu_id, irq);
 }
 
-static void vgic_dist_irq_set(struct kvm_vcpu *vcpu, int irq)
+static void vgic_dist_irq_set_pending(struct kvm_vcpu *vcpu, int irq)
 {
 	struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
 
-	vgic_bitmap_set_irq_val(&dist->irq_state, vcpu->vcpu_id, irq, 1);
+	vgic_bitmap_set_irq_val(&dist->irq_pending, vcpu->vcpu_id, irq, 1);
 }
 
-static void vgic_dist_irq_clear(struct kvm_vcpu *vcpu, int irq)
+static void vgic_dist_irq_clear_pending(struct kvm_vcpu *vcpu, int irq)
 {
 	struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
 
-	vgic_bitmap_set_irq_val(&dist->irq_state, vcpu->vcpu_id, irq, 0);
+	vgic_bitmap_set_irq_val(&dist->irq_pending, vcpu->vcpu_id, irq, 0);
 }
 
 static void vgic_cpu_irq_set(struct kvm_vcpu *vcpu, int irq)
@@ -392,7 +392,7 @@  static bool handle_mmio_set_pending_reg(struct kvm_vcpu *vcpu,
 					struct kvm_exit_mmio *mmio,
 					phys_addr_t offset)
 {
-	u32 *reg = vgic_bitmap_get_reg(&vcpu->kvm->arch.vgic.irq_state,
+	u32 *reg = vgic_bitmap_get_reg(&vcpu->kvm->arch.vgic.irq_pending,
 				       vcpu->vcpu_id, offset);
 	vgic_reg_access(mmio, reg, offset,
 			ACCESS_READ_VALUE | ACCESS_WRITE_SETBIT);
@@ -408,7 +408,7 @@  static bool handle_mmio_clear_pending_reg(struct kvm_vcpu *vcpu,
 					  struct kvm_exit_mmio *mmio,
 					  phys_addr_t offset)
 {
-	u32 *reg = vgic_bitmap_get_reg(&vcpu->kvm->arch.vgic.irq_state,
+	u32 *reg = vgic_bitmap_get_reg(&vcpu->kvm->arch.vgic.irq_pending,
 				       vcpu->vcpu_id, offset);
 	vgic_reg_access(mmio, reg, offset,
 			ACCESS_READ_VALUE | ACCESS_WRITE_CLEARBIT);
@@ -650,7 +650,7 @@  static void vgic_unqueue_irqs(struct kvm_vcpu *vcpu)
 		 * is fine, then we are only setting a few bits that were
 		 * already set.
 		 */
-		vgic_dist_irq_set(vcpu, irq);
+		vgic_dist_irq_set_pending(vcpu, irq);
 		if (irq < VGIC_NR_SGIS)
 			dist->irq_sgi_sources[vcpu_id][irq] |= 1 << source_cpu;
 		*lr &= ~GICH_LR_PENDING_BIT;
@@ -929,7 +929,7 @@  static void vgic_dispatch_sgi(struct kvm_vcpu *vcpu, u32 reg)
 	kvm_for_each_vcpu(c, vcpu, kvm) {
 		if (target_cpus & 1) {
 			/* Flag the SGI as pending */
-			vgic_dist_irq_set(vcpu, sgi);
+			vgic_dist_irq_set_pending(vcpu, sgi);
 			dist->irq_sgi_sources[c][sgi] |= 1 << vcpu_id;
 			kvm_debug("SGI%d from CPU%d to CPU%d\n", sgi, vcpu_id, c);
 		}
@@ -949,11 +949,11 @@  static int compute_pending_for_cpu(struct kvm_vcpu *vcpu)
 	pend_percpu = vcpu->arch.vgic_cpu.pending_percpu;
 	pend_shared = vcpu->arch.vgic_cpu.pending_shared;
 
-	pending = vgic_bitmap_get_cpu_map(&dist->irq_state, vcpu_id);
+	pending = vgic_bitmap_get_cpu_map(&dist->irq_pending, vcpu_id);
 	enabled = vgic_bitmap_get_cpu_map(&dist->irq_enabled, vcpu_id);
 	bitmap_and(pend_percpu, pending, enabled, VGIC_NR_PRIVATE_IRQS);
 
-	pending = vgic_bitmap_get_shared_map(&dist->irq_state);
+	pending = vgic_bitmap_get_shared_map(&dist->irq_pending);
 	enabled = vgic_bitmap_get_shared_map(&dist->irq_enabled);
 	bitmap_and(pend_shared, pending, enabled, VGIC_NR_SHARED_IRQS);
 	bitmap_and(pend_shared, pend_shared,
@@ -1085,7 +1085,7 @@  static bool vgic_queue_sgi(struct kvm_vcpu *vcpu, int irq)
 	 * our emulated gic and can get rid of them.
 	 */
 	if (!sources) {
-		vgic_dist_irq_clear(vcpu, irq);
+		vgic_dist_irq_clear_pending(vcpu, irq);
 		vgic_cpu_irq_clear(vcpu, irq);
 		return true;
 	}
@@ -1100,7 +1100,7 @@  static bool vgic_queue_hwirq(struct kvm_vcpu *vcpu, int irq)
 
 	if (vgic_queue_irq(vcpu, 0, irq)) {
 		if (vgic_irq_is_edge(vcpu, irq)) {
-			vgic_dist_irq_clear(vcpu, irq);
+			vgic_dist_irq_clear_pending(vcpu, irq);
 			vgic_cpu_irq_clear(vcpu, irq);
 		} else {
 			vgic_irq_set_active(vcpu, irq);
@@ -1297,7 +1297,7 @@  static void vgic_kick_vcpus(struct kvm *kvm)
 
 static int vgic_validate_injection(struct kvm_vcpu *vcpu, int irq, int level)
 {
-	int is_edge = vgic_irq_is_edge(vcpu, irq);
+	int edge_triggered = vgic_irq_is_edge(vcpu, irq);
 	int state = vgic_dist_irq_is_pending(vcpu, irq);
 
 	/*
@@ -1305,26 +1305,26 @@  static int vgic_validate_injection(struct kvm_vcpu *vcpu, int irq, int level)
 	 * - edge triggered and we have a rising edge
 	 * - level triggered and we change level
 	 */
-	if (is_edge)
+	if (edge_triggered)
 		return level > state;
 	else
 		return level != state;
 }
 
-static bool vgic_update_irq_state(struct kvm *kvm, int cpuid,
+static bool vgic_update_irq_pending(struct kvm *kvm, int cpuid,
 				  unsigned int irq_num, bool level)
 {
 	struct vgic_dist *dist = &kvm->arch.vgic;
 	struct kvm_vcpu *vcpu;
-	int is_edge, is_level;
+	int edge_triggered, level_triggered;
 	int enabled;
 	bool ret = true;
 
 	spin_lock(&dist->lock);
 
 	vcpu = kvm_get_vcpu(kvm, cpuid);
-	is_edge = vgic_irq_is_edge(vcpu, irq_num);
-	is_level = !is_edge;
+	edge_triggered = vgic_irq_is_edge(vcpu, irq_num);
+	level_triggered = !edge_triggered;
 
 	if (!vgic_validate_injection(vcpu, irq_num, level)) {
 		ret = false;
@@ -1339,9 +1339,9 @@  static bool vgic_update_irq_state(struct kvm *kvm, int cpuid,
 	kvm_debug("Inject IRQ%d level %d CPU%d\n", irq_num, level, cpuid);
 
 	if (level)
-		vgic_dist_irq_set(vcpu, irq_num);
+		vgic_dist_irq_set_pending(vcpu, irq_num);
 	else
-		vgic_dist_irq_clear(vcpu, irq_num);
+		vgic_dist_irq_clear_pending(vcpu, irq_num);
 
 	enabled = vgic_irq_is_enabled(vcpu, irq_num);
 
@@ -1350,7 +1350,7 @@  static bool vgic_update_irq_state(struct kvm *kvm, int cpuid,
 		goto out;
 	}
 
-	if (is_level && vgic_irq_is_active(vcpu, irq_num)) {
+	if (level_triggered && vgic_irq_is_active(vcpu, irq_num)) {
 		/*
 		 * Level interrupt in progress, will be picked up
 		 * when EOId.
@@ -1387,7 +1387,7 @@  out:
 int kvm_vgic_inject_irq(struct kvm *kvm, int cpuid, unsigned int irq_num,
 			bool level)
 {
-	if (vgic_update_irq_state(kvm, cpuid, irq_num, level))
+	if (vgic_update_irq_pending(kvm, cpuid, irq_num, level))
 		vgic_kick_vcpus(kvm);
 
 	return 0;