| Message ID | 1404948052-6333-1-git-send-email-steve.mcintyre@linaro.org |
|---|---|
| State | Accepted |
| Commit | a356c0a87e8f566fcaa01bde09c44bbd63ef7815 |
| Headers | show |
These are good clear instructions. Thanks. On Wed, Jul 9, 2014 at 6:20 PM, <steve.mcintyre@linaro.org> wrote: > From: Steve McIntyre <steve.mcintyre@linaro.org> > > Add some documentation describing the minimum requirements and > recommended versions of tools and libraries for building ODP. > > This initial checkin just mentions the Linux kernel and autotools. > > Signed-off-by: Steve McIntyre <steve.mcintyre@linaro.org> > --- > DEPENDENCIES | 20 ++++++++++++++++++++ > README | 1 + > 2 files changed, 21 insertions(+) > create mode 100644 DEPENDENCIES > > diff --git a/DEPENDENCIES b/DEPENDENCIES > new file mode 100644 > index 0000000..390d58e > --- /dev/null > +++ b/DEPENDENCIES > @@ -0,0 +1,20 @@ > +Prerequisites for building the Open Dataplane (ODP) API, platform > +linux-generic. > + > +1. Linux kernel >= 3.0 > + > + Version 3.0+ needed for the sendmmsg() interface > + > +2. autotools > + > + automake > + autoconf > + autoconf-archive > + libtool > + > + On Debian/Ubuntu systems: > + $ sudo apt-get install automake autoconf autoconf-archive libtool > + > + On CentOS/RedHat/Fedora systems: > + $ sudo yum install automake autoconf autoconf-archive libtool > libtoolize > + > diff --git a/README b/README > index 36545dd..7ecc655 100644 > --- a/README > +++ b/README > @@ -19,6 +19,7 @@ Main git repository: > build directory. > For cross compiling set up appropriate CC: > make CC=armeb-linux-gnueabihf-gcc > + For a list of build dependencies, read DEPENDENCIES > > Make command options: > ODP_RELOC compile library with position independent code; > -- > 1.7.10.4 > > > _______________________________________________ > lng-odp mailing list > lng-odp@lists.linaro.org > http://lists.linaro.org/mailman/listinfo/lng-odp >
On 9 July 2014 19:29, Bill Fischofer <bill.fischofer@linaro.org> wrote: > These are good clear instructions. Thanks. > > > On Wed, Jul 9, 2014 at 6:20 PM, <steve.mcintyre@linaro.org> wrote: > >> From: Steve McIntyre <steve.mcintyre@linaro.org> >> >> Add some documentation describing the minimum requirements and >> recommended versions of tools and libraries for building ODP. >> >> This initial checkin just mentions the Linux kernel and autotools. >> >> Signed-off-by: Steve McIntyre <steve.mcintyre@linaro.org> >> --- >> DEPENDENCIES | 20 ++++++++++++++++++++ >> README | 1 + >> 2 files changed, 21 insertions(+) >> create mode 100644 DEPENDENCIES >> >> diff --git a/DEPENDENCIES b/DEPENDENCIES >> new file mode 100644 >> index 0000000..390d58e >> --- /dev/null >> +++ b/DEPENDENCIES >> @@ -0,0 +1,20 @@ >> +Prerequisites for building the Open Dataplane (ODP) API, platform >> +linux-generic. >> + >> +1. Linux kernel >= 3.0 >> + >> + Version 3.0+ needed for the sendmmsg() interface >> + >> +2. autotools >> + >> + automake >> + autoconf >> + autoconf-archive >> + libtool >> + >> + On Debian/Ubuntu systems: >> + $ sudo apt-get install automake autoconf autoconf-archive libtool >> > I did not need autoconf-archive on Ubuntu 14.04, I believe autoconf 2.69 or later is fine without it, if it is an earlier version then you need to install autoconf-archive. However I added the package just as described here and it does not appear to have broken anything either. Reviewed-by Mike Holmes <mike.holmes@linaro.org> + >> + On CentOS/RedHat/Fedora systems: >> + $ sudo yum install automake autoconf autoconf-archive libtool >> libtoolize >> + >> diff --git a/README b/README >> index 36545dd..7ecc655 100644 >> --- a/README >> +++ b/README >> @@ -19,6 +19,7 @@ Main git repository: >> build directory. >> For cross compiling set up appropriate CC: >> make CC=armeb-linux-gnueabihf-gcc >> + For a list of build dependencies, read DEPENDENCIES >> >> Make command options: >> ODP_RELOC compile library with position independent code; >> -- >> 1.7.10.4 >> >> >> _______________________________________________ >> lng-odp mailing list >> lng-odp@lists.linaro.org >> http://lists.linaro.org/mailman/listinfo/lng-odp >> > > > _______________________________________________ > lng-odp mailing list > lng-odp@lists.linaro.org > http://lists.linaro.org/mailman/listinfo/lng-odp > >
On 2014-07-09 20:06, Mike Holmes wrote: > On 9 July 2014 19:29, Bill Fischofer <bill.fischofer@linaro.org> wrote: > > > These are good clear instructions. Thanks. > > > > > > On Wed, Jul 9, 2014 at 6:20 PM, <steve.mcintyre@linaro.org> wrote: > > > >> From: Steve McIntyre <steve.mcintyre@linaro.org> > >> > >> Add some documentation describing the minimum requirements and > >> recommended versions of tools and libraries for building ODP. > >> > >> This initial checkin just mentions the Linux kernel and autotools. > >> > >> Signed-off-by: Steve McIntyre <steve.mcintyre@linaro.org> > >> --- > >> DEPENDENCIES | 20 ++++++++++++++++++++ > >> README | 1 + > >> 2 files changed, 21 insertions(+) > >> create mode 100644 DEPENDENCIES > >> > >> diff --git a/DEPENDENCIES b/DEPENDENCIES > >> new file mode 100644 > >> index 0000000..390d58e > >> --- /dev/null > >> +++ b/DEPENDENCIES > >> @@ -0,0 +1,20 @@ > >> +Prerequisites for building the Open Dataplane (ODP) API, platform Found another nit: Open Dataplane -> OpenDataPlane Reviewed-by: Anders Roxell <anders.roxell@linaro.org> Cheers, Anders > >> +linux-generic. > >> + > >> +1. Linux kernel >= 3.0 > >> + > >> + Version 3.0+ needed for the sendmmsg() interface > >> + > >> +2. autotools > >> + > >> + automake > >> + autoconf > >> + autoconf-archive > >> + libtool > >> + > >> + On Debian/Ubuntu systems: > >> + $ sudo apt-get install automake autoconf autoconf-archive libtool > >> > > I did not need autoconf-archive on Ubuntu 14.04, I believe autoconf 2.69 > or later is fine without it, if it is an earlier version then you need to > install autoconf-archive. However I added the package just as described > here and it does not appear to have broken anything either. > > Reviewed-by Mike Holmes <mike.holmes@linaro.org> > > > + > >> + On CentOS/RedHat/Fedora systems: > >> + $ sudo yum install automake autoconf autoconf-archive libtool > >> libtoolize > >> + > >> diff --git a/README b/README > >> index 36545dd..7ecc655 100644 > >> --- a/README > >> +++ b/README > >> @@ -19,6 +19,7 @@ Main git repository: > >> build directory. > >> For cross compiling set up appropriate CC: > >> make CC=armeb-linux-gnueabihf-gcc > >> + For a list of build dependencies, read DEPENDENCIES > >> > >> Make command options: > >> ODP_RELOC compile library with position independent code; > >> -- > >> 1.7.10.4 > >> > >> > >> _______________________________________________ > >> lng-odp mailing list > >> lng-odp@lists.linaro.org > >> http://lists.linaro.org/mailman/listinfo/lng-odp > >> > > > > > > _______________________________________________ > > lng-odp mailing list > > lng-odp@lists.linaro.org > > http://lists.linaro.org/mailman/listinfo/lng-odp > > > > > > > -- > *Mike Holmes* > Linaro Technical Manager / Lead > LNG - ODP > _______________________________________________ > lng-odp mailing list > lng-odp@lists.linaro.org > http://lists.linaro.org/mailman/listinfo/lng-odp
On Wed, Jul 09, 2014 at 08:06:02PM -0400, Mike Holmes wrote: > > > >On 9 July 2014 19:29, Bill Fischofer <bill.fischofer@linaro.org> wrote: > > These are good clear instructions. Thanks. > > > On Wed, Jul 9, 2014 at 6:20 PM, <steve.mcintyre@linaro.org> wrote: > > From: Steve McIntyre <steve.mcintyre@linaro.org> > > Add some documentation describing the minimum requirements and > recommended versions of tools and libraries for building ODP. > > This initial checkin just mentions the Linux kernel and autotools. > > Signed-off-by: Steve McIntyre <steve.mcintyre@linaro.org> > --- > DEPENDENCIES | 20 ++++++++++++++++++++ > README | 1 + > 2 files changed, 21 insertions(+) > create mode 100644 DEPENDENCIES > > diff --git a/DEPENDENCIES b/DEPENDENCIES > new file mode 100644 > index 0000000..390d58e > --- /dev/null > +++ b/DEPENDENCIES > @@ -0,0 +1,20 @@ > +Prerequisites for building the Open Dataplane (ODP) API, platform > +linux-generic. > + > +1. Linux kernel >= 3.0 > + > + Version 3.0+ needed for the sendmmsg() interface > + > +2. autotools > + > + automake > + autoconf > + autoconf-archive > + libtool > + > + On Debian/Ubuntu systems: > + $ sudo apt-get install automake autoconf autoconf-archive libtool > >I did not need autoconf-archive on Ubuntu 14.04, I believe autoconf 2.69 or >later is fine without it, if it is an earlier version then you need to install >autoconf-archive. However I added the package just as described here and it >does not appear to have broken anything either. ACK. autoconf-archive is an extra collection of autoconf macros that work with older versions of the autoconf packages to add more recent capabilities. If you already have a recent-enough version of autoconf then you'll be fine without it. But it's a harmless thing to add in such a case. Not sure if it's worth the effort to investigate the precise versions - I'm minded to leave it as-is. I also don't use any RPM (Fedora/CentOS/RedHat/Suse) machines, so the command line there is what I've worked out from what other people have reported. Cheers,
On Thu, Jul 10, 2014 at 11:01:56AM +0200, Anders Roxell wrote: >On 2014-07-09 20:06, Mike Holmes wrote: >> >> +Prerequisites for building the Open Dataplane (ODP) API, platform > >Found another nit: Open Dataplane -> OpenDataPlane Doh! v2 on its way shortly. Cheers,
diff --git a/DEPENDENCIES b/DEPENDENCIES new file mode 100644 index 0000000..390d58e --- /dev/null +++ b/DEPENDENCIES @@ -0,0 +1,20 @@ +Prerequisites for building the Open Dataplane (ODP) API, platform +linux-generic. + +1. Linux kernel >= 3.0 + + Version 3.0+ needed for the sendmmsg() interface + +2. autotools + + automake + autoconf + autoconf-archive + libtool + + On Debian/Ubuntu systems: + $ sudo apt-get install automake autoconf autoconf-archive libtool + + On CentOS/RedHat/Fedora systems: + $ sudo yum install automake autoconf autoconf-archive libtool libtoolize + diff --git a/README b/README index 36545dd..7ecc655 100644 --- a/README +++ b/README @@ -19,6 +19,7 @@ Main git repository: build directory. For cross compiling set up appropriate CC: make CC=armeb-linux-gnueabihf-gcc + For a list of build dependencies, read DEPENDENCIES Make command options: ODP_RELOC compile library with position independent code;