@@ -4,6 +4,9 @@ config ARCH_HISI
select ARM_AMBA
select ARM_GIC
select ARM_TIMER_SP804
+ select POWER_RESET
+ select POWER_RESET_HISI
+ select POWER_SUPPLY
if ARCH_HISI
@@ -14,10 +14,6 @@
#include <linux/clk-provider.h>
#include <linux/clocksource.h>
#include <linux/irqchip.h>
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
-
-#include <asm/proc-fns.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -51,32 +47,6 @@ static void __init hi3620_map_io(void)
iotable_init(hi3620_io_desc, ARRAY_SIZE(hi3620_io_desc));
}
-static void hi3xxx_restart(enum reboot_mode mode, const char *cmd)
-{
- struct device_node *np;
- void __iomem *base;
- int offset;
-
- np = of_find_compatible_node(NULL, NULL, "hisilicon,sysctrl");
- if (!np) {
- pr_err("failed to find hisilicon,sysctrl node\n");
- return;
- }
- base = of_iomap(np, 0);
- if (!base) {
- pr_err("failed to map address in hisilicon,sysctrl node\n");
- return;
- }
- if (of_property_read_u32(np, "reboot-offset", &offset) < 0) {
- pr_err("failed to find reboot-offset property\n");
- return;
- }
- writel_relaxed(0xdeadbeef, base + offset);
-
- while (1)
- cpu_do_idle();
-}
-
static const char *hi3xxx_compat[] __initconst = {
"hisilicon,hi3620-hi4511",
NULL,
@@ -86,7 +56,6 @@ DT_MACHINE_START(HI3620, "Hisilicon Hi3620 (Flattened Device Tree)")
.map_io = hi3620_map_io,
.dt_compat = hi3xxx_compat,
.smp = smp_ops(hi3xxx_smp_ops),
- .restart = hi3xxx_restart,
MACHINE_END
static const char *hix5hd2_compat[] __initconst = {
@@ -96,7 +65,5 @@ static const char *hix5hd2_compat[] __initconst = {
DT_MACHINE_START(HIX5HD2_DT, "Hisilicon HIX5HD2 (Flattened Device Tree)")
.dt_compat = hix5hd2_compat,
- .init_late = hi3xxx_init_late,
.smp = smp_ops(hix5hd2_smp_ops),
- .restart = hi3xxx_restart,
MACHINE_END
@@ -28,6 +28,12 @@ config POWER_RESET_GPIO
If your board needs a GPIO high/low to power down, say Y and
create a binding in your devicetree.
+config POWER_RESET_HISI
+ bool "Hisilicon power-off driver"
+ depends on POWER_RESET && ARCH_HISI
+ help
+ Reboot support for Hisilicon boards.
+
config POWER_RESET_MSM
bool "Qualcomm MSM power-off driver"
depends on POWER_RESET && ARCH_QCOM
@@ -1,6 +1,7 @@
obj-$(CONFIG_POWER_RESET_AS3722) += as3722-poweroff.o
obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o
obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
+obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o
new file mode 100644
@@ -0,0 +1,67 @@
+/*
+ * Hisilicon SoC reset code
+ *
+ * Copyright (c) 2014 Hisilicon Ltd.
+ * Copyright (c) 2014 Linaro Ltd.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+
+#include <asm/proc-fns.h>
+#include <asm/system_misc.h>
+
+static void __iomem *base;
+static u32 reboot_offset;
+
+static void hisi_restart(enum reboot_mode mode, const char *cmd)
+{
+ writel_relaxed(0xdeadbeef, base + reboot_offset);
+
+ while (1)
+ cpu_do_idle();
+}
+
+static int hisi_reboot_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+
+ base = of_iomap(np, 0);
+ if (!base) {
+ WARN(1, "failed to map base address");
+ return -ENODEV;
+ }
+
+ if (of_property_read_u32(np, "reboot-offset", &reboot_offset) < 0) {
+ pr_err("failed to find reboot-offset property\n");
+ return -EINVAL;
+ }
+
+ arm_pm_restart = hisi_restart;
+
+ return 0;
+}
+
+static struct of_device_id hisi_reboot_of_match[] = {
+ { .compatible = "hisilicon,sysctrl" },
+ {}
+};
+
+static struct platform_driver hisi_reboot_driver = {
+ .probe = hisi_reboot_probe,
+ .driver = {
+ .name = "hisi-reboot",
+ .of_match_table = hisi_reboot_of_match,
+ },
+};
+module_platform_driver(hisi_reboot_driver);
Move reboot code from hisilicon platform driver into reset driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> --- arch/arm/mach-hisi/Kconfig | 3 ++ arch/arm/mach-hisi/hisilicon.c | 33 ------------------- drivers/power/reset/Kconfig | 6 ++++ drivers/power/reset/Makefile | 1 + drivers/power/reset/hisi-reboot.c | 67 +++++++++++++++++++++++++++++++++++++++ 5 files changed, 77 insertions(+), 33 deletions(-) create mode 100644 drivers/power/reset/hisi-reboot.c