new file mode 100644
@@ -0,0 +1,203 @@
+* CoreSight Components:
+
+CoreSight components are compliant with the ARM CoreSight architecture
+specification and can be connected in various topologies to suit a particular
+SoCs tracing needs. These trace components can generally be classified as sinks,
+links and sources. Trace data produced by one or more sources flows through the
+intermediate links connecting the source to the currently selected sink. Each
+CoreSight component device should use these properties to describe its hardware
+characteristcs.
+
+* Required properties for all components *except* non-configurable replicators:
+
+ * compatible: These have to be supplemented with "arm,primecell" as
+ drivers are using the AMBA bus interface. Possible values include:
+ - "arm,coresight-etb10", "arm,primecell";
+ - "arm,coresight-tpiu", "arm,primecell";
+ - "arm,coresight-tmc", "arm,primecell";
+ - "arm,coresight-funnel", "arm,primecell";
+ - "arm,coresight-etm3x", "arm,primecell";
+
+ * reg: physical base address and length of the register
+ set(s) of the component.
+
+ * clocks: the clock associated to this component.
+
+ * clock-names: the name of the clock as referenced by the code.
+ Since we are using the AMBA framework, the name should be
+ "apb_pclk".
+
+ * port or ports: The representation of the component's port
+ layout using the generic DT graph presentation found in
+ "bindings/graph.txt".
+
+* Required properties for devices that don't show up on the AMBA bus, such as
+ non-configurable replicators:
+
+ * compatible: Currently supported value is (note the absence of the
+ AMBA markee):
+ - "arm,coresight-replicator"
+
+ * id: a unique number that will identify this replicator.
+
+ * port or ports: same as above.
+
+* Optional properties for ETM/PTMs:
+
+ * arm,cp14: must be present if the system accesses ETM/PTM management registers
+ via co-processor 14.
+
+ * cpu: the cpu phandle this ETM/PTM is affined to. When omitted the source is
+ considered to belong to CPU0.
+
+* Optional property for TMC:
+
+ * arm,buffer-size: size of contiguous buffer space for TMC ETR
+ (embedded trace router)
+
+
+Example:
+
+1. Sinks
+ etb@0,20010000 {
+ compatible = "arm,coresight-etb10", "arm,primecell";
+ reg = <0 0x20010000 0 0x1000>;
+
+ coresight-default-sink;
+ clocks = <&oscclk6a>;
+ clock-names = "apb_pclk";
+ port {
+ etb_in_port: endpoint@0 {
+ slave-mode;
+ remote-endpoint = <&replicator_out_port0>;
+ };
+ };
+ };
+
+ tpiu@0,20030000 {
+ compatible = "arm,coresight-tpiu", "arm,primecell";
+ reg = <0 0x20030000 0 0x1000>;
+
+ clocks = <&oscclk6a>;
+ clock-names = "apb_pclk";
+ port {
+ tpiu_in_port: endpoint@0 {
+ slave-mode;
+ remote-endpoint = <&replicator_out_port1>;
+ };
+ };
+ };
+
+2. Links
+ replicator {
+ /* non-configurable replicators don't show up on the
+ * AMBA bus. As such no need to add "arm,primecell".
+ */
+ compatible = "arm,coresight-replicator";
+ /* this will show up in debugfs as "0.replicator" */
+ id = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* replicator output ports */
+ port@0 {
+ reg = <0>;
+ replicator_out_port0: endpoint {
+ remote-endpoint = <&etb_in_port>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ replicator_out_port1: endpoint {
+ remote-endpoint = <&tpiu_in_port>;
+ };
+ };
+
+ /* replicator input port */
+ port@2 {
+ reg = <0>;
+ replicator_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint = <&funnel_out_port0>;
+ };
+ };
+ };
+ };
+
+ funnel@0,20040000 {
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0 0x20040000 0 0x1000>;
+
+ clocks = <&oscclk6a>;
+ clock-names = "apb_pclk";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* funnel output port */
+ port@0 {
+ reg = <0>;
+ funnel_out_port0: endpoint {
+ remote-endpoint = <&replicator_in_port0>;
+ };
+ };
+
+ /* funnel input ports */
+ port@1 {
+ reg = <0>;
+ funnel_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint = <&ptm0_out_port>;
+ };
+ };
+
+ port@2 {
+ reg = <1>;
+ funnel_in_port1: endpoint {
+ slave-mode;
+ remote-endpoint = <&ptm1_out_port>;
+ };
+ };
+
+ port@3 {
+ reg = <2>;
+ funnel_in_port2: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm0_out_port>;
+ };
+ };
+
+ };
+ };
+
+3. Sources
+ ptm@0,2201c000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0 0x2201c000 0 0x1000>;
+
+ cpu = <&cpu0>;
+ clocks = <&oscclk6a>;
+ clock-names = "apb_pclk";
+ port {
+ ptm0_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port0>;
+ };
+ };
+ };
+
+ ptm@0,2201d000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0 0x2201d000 0 0x1000>;
+
+ cpu = <&cpu1>;
+ clocks = <&oscclk6a>;
+ clock-names = "apb_pclk";
+ port {
+ ptm1_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port1>;
+ };
+ };
+ };