| Message ID | 1411498874-9864-11-git-send-email-Liviu.Dudau@arm.com |
|---|---|
| State | New |
| Headers | show |
On Tue, Sep 23, 2014 at 08:01:12PM +0100, Liviu Dudau wrote: > If the firmware has not assigned all the bus resources and > we are not just probing the PCIe busses, it makes sense to > assign the unassigned resources in pci_scan_root_bus(). > > Cc: Bjorn Helgaas <bhelgaas@google.com> > Cc: Arnd Bergmann <arnd@arndb.de> > Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> > Cc: Rob Herring <robh+dt@kernel.org> > Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> > --- > drivers/pci/probe.c | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c > index ef891d2..508cf61 100644 > --- a/drivers/pci/probe.c > +++ b/drivers/pci/probe.c > @@ -1953,6 +1953,9 @@ struct pci_bus *pci_scan_root_bus(struct device *parent, int bus, > if (!found) > pci_bus_update_busn_res_end(b, max); > > + if (!pci_has_flag(PCI_PROBE_ONLY)) > + pci_assign_unassigned_bus_resources(b); > + > pci_bus_add_devices(b); > return b; > } > -- > 2.1.0 > Bjorn, If you are OK with this patch, can you let me know how do you feel about making pci_scan_root_bus() set up the bus->msi pointer as well? Side note: I don't know exactly how to do it now, but setting bus->msi is needed by platforms that are based on my patches and want to use MSI, otherwise they have to open code pci_scan_root_bus() to set it. I haven't made any attempts to do it in this series as the GICv2m patches are not ready yet, but I can see the need arriving soon. Best regards, Liviu > -- > To unsubscribe from this list: send the line "unsubscribe linux-pci" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html >
On Tue, Sep 23, 2014 at 7:18 PM, Liviu Dudau <liviu@dudau.co.uk> wrote: > On Tue, Sep 23, 2014 at 08:01:12PM +0100, Liviu Dudau wrote: >> If the firmware has not assigned all the bus resources and >> we are not just probing the PCIe busses, it makes sense to >> assign the unassigned resources in pci_scan_root_bus(). >> >> Cc: Bjorn Helgaas <bhelgaas@google.com> >> Cc: Arnd Bergmann <arnd@arndb.de> >> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> >> Cc: Rob Herring <robh+dt@kernel.org> >> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> >> --- >> drivers/pci/probe.c | 3 +++ >> 1 file changed, 3 insertions(+) >> >> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c >> index ef891d2..508cf61 100644 >> --- a/drivers/pci/probe.c >> +++ b/drivers/pci/probe.c >> @@ -1953,6 +1953,9 @@ struct pci_bus *pci_scan_root_bus(struct device *parent, int bus, >> if (!found) >> pci_bus_update_busn_res_end(b, max); >> >> + if (!pci_has_flag(PCI_PROBE_ONLY)) >> + pci_assign_unassigned_bus_resources(b); >> + >> pci_bus_add_devices(b); >> return b; >> } >> -- >> 2.1.0 >> > > Bjorn, > > If you are OK with this patch, can you let me know how do you feel about > making pci_scan_root_bus() set up the bus->msi pointer as well? I'm not opposed to it, but I have the same question as for setting up the domain: how does pci_scan_root_bus() learn what to assign to bus->msi? It currently only gets a "void *sysdata" so there's no obvious place to put it there. You could add a pcibios interface to retrieve it, I suppose, but I'm starting to get uncomfortable with adding more of those because we have such a mess of them already. Bjorn > Side note: I don't know exactly how to do it now, but setting bus->msi is > needed by platforms that are based on my patches and want to use MSI, > otherwise they have to open code pci_scan_root_bus() to set it. I haven't > made any attempts to do it in this series as the GICv2m patches are not > ready yet, but I can see the need arriving soon. > > Best regards, > Liviu > >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-pci" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> > > -- > ------------------- > .oooO > ( ) > \ ( Oooo. > \_) ( ) > ) / > (_/ > > One small step > for me ... > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
On Tue, Sep 23, 2014 at 07:41:35PM -0600, Bjorn Helgaas wrote: > On Tue, Sep 23, 2014 at 7:18 PM, Liviu Dudau <liviu@dudau.co.uk> wrote: > > On Tue, Sep 23, 2014 at 08:01:12PM +0100, Liviu Dudau wrote: > >> If the firmware has not assigned all the bus resources and > >> we are not just probing the PCIe busses, it makes sense to > >> assign the unassigned resources in pci_scan_root_bus(). > >> > >> Cc: Bjorn Helgaas <bhelgaas@google.com> > >> Cc: Arnd Bergmann <arnd@arndb.de> > >> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> > >> Cc: Rob Herring <robh+dt@kernel.org> > >> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> > >> --- > >> drivers/pci/probe.c | 3 +++ > >> 1 file changed, 3 insertions(+) > >> > >> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c > >> index ef891d2..508cf61 100644 > >> --- a/drivers/pci/probe.c > >> +++ b/drivers/pci/probe.c > >> @@ -1953,6 +1953,9 @@ struct pci_bus *pci_scan_root_bus(struct device *parent, int bus, > >> if (!found) > >> pci_bus_update_busn_res_end(b, max); > >> > >> + if (!pci_has_flag(PCI_PROBE_ONLY)) > >> + pci_assign_unassigned_bus_resources(b); > >> + > >> pci_bus_add_devices(b); > >> return b; > >> } > >> -- > >> 2.1.0 > >> > > > > Bjorn, > > > > If you are OK with this patch, can you let me know how do you feel about > > making pci_scan_root_bus() set up the bus->msi pointer as well? > > I'm not opposed to it, but I have the same question as for setting up > the domain: how does pci_scan_root_bus() learn what to assign to > bus->msi? It currently only gets a "void *sysdata" so there's no > obvious place to put it there. You could add a pcibios interface to > retrieve it, I suppose, but I'm starting to get uncomfortable with > adding more of those because we have such a mess of them already. My long term view is that the creation of the pci_host_bridge structure needs to be separated from the creation and scanning of the root bus. Then we can add host bridge ops or some other API to the structure that should allow for less friction in passing information to the bridge. Best regards, Liviu > > Bjorn > > > Side note: I don't know exactly how to do it now, but setting bus->msi is > > needed by platforms that are based on my patches and want to use MSI, > > otherwise they have to open code pci_scan_root_bus() to set it. I haven't > > made any attempts to do it in this series as the GICv2m patches are not > > ready yet, but I can see the need arriving soon. > > > > Best regards, > > Liviu > > > >> -- > >> To unsubscribe from this list: send the line "unsubscribe linux-pci" in > >> the body of a message to majordomo@vger.kernel.org > >> More majordomo info at http://vger.kernel.org/majordomo-info.html > >> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 09/23/2014 08:41 PM, Bjorn Helgaas wrote: > On Tue, Sep 23, 2014 at 7:18 PM, Liviu Dudau <liviu@dudau.co.uk> wrote: >> On Tue, Sep 23, 2014 at 08:01:12PM +0100, Liviu Dudau wrote: >>> If the firmware has not assigned all the bus resources and >>> we are not just probing the PCIe busses, it makes sense to >>> assign the unassigned resources in pci_scan_root_bus(). >>> >>> Cc: Bjorn Helgaas <bhelgaas@google.com> >>> Cc: Arnd Bergmann <arnd@arndb.de> >>> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> >>> Cc: Rob Herring <robh+dt@kernel.org> >>> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> >>> --- >>> drivers/pci/probe.c | 3 +++ >>> 1 file changed, 3 insertions(+) >>> >>> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c >>> index ef891d2..508cf61 100644 >>> --- a/drivers/pci/probe.c >>> +++ b/drivers/pci/probe.c >>> @@ -1953,6 +1953,9 @@ struct pci_bus *pci_scan_root_bus(struct device *parent, int bus, >>> if (!found) >>> pci_bus_update_busn_res_end(b, max); >>> >>> + if (!pci_has_flag(PCI_PROBE_ONLY)) >>> + pci_assign_unassigned_bus_resources(b); >>> + >>> pci_bus_add_devices(b); >>> return b; >>> } >>> -- >>> 2.1.0 >>> >> >> Bjorn, >> >> If you are OK with this patch, can you let me know how do you feel about >> making pci_scan_root_bus() set up the bus->msi pointer as well? > > I'm not opposed to it, but I have the same question as for setting up > the domain: how does pci_scan_root_bus() learn what to assign to > bus->msi? It currently only gets a "void *sysdata" so there's no > obvious place to put it there. You could add a pcibios interface to > retrieve it, I suppose, but I'm starting to get uncomfortable with > adding more of those because we have such a mess of them already. > > Bjorn [Suravee] Liviu and I had a talk during Linaro Connect, and we came up with a new binding for the pcie controller called "msi-parent" which is supposed to contain phandle to the corresponded msi-controller. > >> Side note: I don't know exactly how to do it now, but setting bus->msi is >> needed by platforms that are based on my patches and want to use MSI, >> otherwise they have to open code pci_scan_root_bus() to set it. I haven't >> made any attempts to do it in this series as the GICv2m patches are not >> ready yet, but I can see the need arriving soon. [Suravee] I just sent out an RFC which implements the described binding here. https://lkml.org/lkml/2014/9/28/149 Any feedback/comments are welcome :) Thanks, Suravee -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index ef891d2..508cf61 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -1953,6 +1953,9 @@ struct pci_bus *pci_scan_root_bus(struct device *parent, int bus, if (!found) pci_bus_update_busn_res_end(b, max); + if (!pci_has_flag(PCI_PROBE_ONLY)) + pci_assign_unassigned_bus_resources(b); + pci_bus_add_devices(b); return b; }
If the firmware has not assigned all the bus resources and we are not just probing the PCIe busses, it makes sense to assign the unassigned resources in pci_scan_root_bus(). Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> --- drivers/pci/probe.c | 3 +++ 1 file changed, 3 insertions(+)