new file mode 100644
@@ -0,0 +1,17 @@
+OP-TEE Device Tree Bindings
+
+OP-TEE is a piece of software using hardware features to provide a Trusted
+Execution Environment. The security can be provided with ARM TrustZone, but
+also by virtualization or a separate chip. As there's no single OP-TEE
+vendor we're using "optee" as the first part of compatible propterty,
+indicating the OP-TEE protocol is used when communicating with the secure
+world.
+
+* OP-TEE based on ARM TrustZone required properties:
+
+- compatible="optee,optee-tz"
+
+Example:
+ optee {
+ compatible="optee,optee-tz";
+ };
@@ -141,6 +141,7 @@ nvidia NVIDIA
nxp NXP Semiconductors
onnn ON Semiconductor Corp.
opencores OpenCores.org
+optee OP-TEE, Open Portable Trusted Execution Environment
ortustech Ortus Technology Co., Ltd.
ovti OmniVision Technologies
panasonic Panasonic Corporation
@@ -7295,6 +7295,12 @@ F: arch/*/oprofile/
F: drivers/oprofile/
F: include/linux/oprofile.h
+OP-TEE DRIVER
+M: Jens Wiklander <jens.wiklander@linaro.org>
+S: Maintained
+F: include/uapi/linux/optee_msg.h
+F: drivers/tee/optee/
+
ORACLE CLUSTER FILESYSTEM 2 (OCFS2)
M: Mark Fasheh <mfasheh@suse.com>
M: Joel Becker <jlbec@evilplan.org>
@@ -6,3 +6,13 @@ config TEE
help
This implements a generic interface towards a Trusted Execution
Environment (TEE).
+
+if TEE
+
+menu "TEE drivers"
+
+source "drivers/tee/optee/Kconfig"
+
+endmenu
+
+endif
@@ -1,3 +1,4 @@
obj-y += tee.o
obj-y += tee_shm.o
obj-y += tee_shm_pool.o
+obj-$(CONFIG_OPTEE) += optee/
new file mode 100644
@@ -0,0 +1,19 @@
+# OP-TEE Trusted Execution Environment Configuration
+config OPTEE
+ tristate "OP-TEE"
+ default n
+ depends on ARM || ARM64
+ help
+ This implements the OP-TEE Trusted Execution Environment (TEE)
+ driver.
+
+if OPTEE
+menu "OP-TEE options"
+config OPTEE_USE_CMA
+ bool "Use CMA"
+ default n
+ select DMA_CMA
+ help
+ Configures OP-TEE driver to use CMA for shared memory allocations.
+endmenu
+endif
new file mode 100644
@@ -0,0 +1,13 @@
+obj-$(CONFIG_OPTEE) += optee.o
+optee-objs += core.o
+optee-objs += call.o
+ifdef CONFIG_ARM
+plus_sec := $(call as-instr,.arch_extension sec,+sec)
+AFLAGS_smc_a32.o := -Wa,-march=armv7-a$(plus_sec)
+optee-objs += smc_a32.o
+endif
+ifdef CONFIG_ARM64
+optee-objs += smc_a64.o
+endif
+optee-objs += rpc.o
+optee-objs += supp.o
new file mode 100644
@@ -0,0 +1,294 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/types.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/device.h>
+#include <linux/tee_drv.h>
+#include "optee_private.h"
+#include "optee_smc.h"
+
+static void optee_call_lock(struct optee_call_sync *callsync)
+{
+ mutex_lock(&callsync->mutex);
+}
+
+static void optee_call_lock_wait_completion(struct optee_call_sync *callsync)
+{
+ /*
+ * Release the lock until "something happens" and then reacquire it
+ * again.
+ *
+ * This is needed when TEE returns "busy" and we need to try again
+ * later.
+ */
+ callsync->c_waiters++;
+ mutex_unlock(&callsync->mutex);
+ /*
+ * Wait at most one second. Secure world is normally never busy
+ * more than that so we should normally never timeout.
+ */
+ wait_for_completion_timeout(&callsync->c, HZ);
+ mutex_lock(&callsync->mutex);
+ callsync->c_waiters--;
+}
+
+static void optee_call_unlock(struct optee_call_sync *callsync)
+{
+ /*
+ * If at least one thread is waiting for "something to happen" let
+ * one thread know that "something has happened".
+ */
+ if (callsync->c_waiters)
+ complete(&callsync->c);
+ mutex_unlock(&callsync->mutex);
+}
+
+static int optee_arg_from_user(struct opteem_arg *arg, size_t size,
+ struct tee_shm **put_shm)
+{
+ struct opteem_param *param;
+ size_t n;
+
+ if (!arg->num_params || !put_shm)
+ return -EINVAL;
+
+ param = OPTEEM_GET_PARAMS(arg);
+
+ for (n = 0; n < arg->num_params; n++) {
+ struct tee_shm *shm;
+ u32 shm_offs;
+ phys_addr_t pa;
+ int ret;
+
+ if (param[n].attr & ~(OPTEEM_ATTR_TYPE_MASK | OPTEEM_ATTR_META))
+ return -EINVAL;
+
+ if (optee_param_is(param + n, PARAM_MEMREF | PARAM_INOUT)) {
+ shm_offs = param[n].u.memref.buf_ptr;
+ shm = tee_shm_get_from_fd(
+ (int)param[n].u.memref.shm_ref);
+ if (IS_ERR(shm))
+ return PTR_ERR(shm);
+ put_shm[n] = shm;
+ ret = tee_shm_get_pa(shm, shm_offs, &pa);
+ if (ret)
+ return ret;
+ param[n].u.memref.buf_ptr = pa;
+ }
+ }
+
+ return 0;
+}
+
+static int optee_arg_to_user(struct opteem_arg *arg,
+ struct opteem_arg __user *uarg)
+{
+ struct opteem_param *param = OPTEEM_GET_PARAMS(arg);
+ struct opteem_param __user *uparam = (void __user *)(uarg + 1);
+ size_t n;
+
+ if (arg->cmd == OPTEEM_CMD_OPEN_SESSION &&
+ put_user(arg->session, &uarg->session))
+ return -EINVAL;
+ if (put_user(arg->ret, &uarg->ret) ||
+ put_user(arg->ret_origin, &uarg->ret_origin))
+ return -EINVAL;
+
+ for (n = 0; n < arg->num_params; n++) {
+ struct opteem_param *p = param + n;
+ struct opteem_param __user *up = uparam + n;
+
+ if (optee_param_is(p, PARAM_VALUE | PARAM_OUT)) {
+ if (put_user(p->u.value.a, &up->u.value.a) ||
+ put_user(p->u.value.b, &up->u.value.b))
+ return -EINVAL;
+ } else if (optee_param_is(p, PARAM_MEMREF | PARAM_OUT)) {
+ if (put_user(p->u.memref.size, &up->u.memref.size))
+ return -EINVAL;
+ }
+ }
+ return 0;
+}
+
+/* Requires the filpstate mutex to be held */
+static struct optee_session *find_session(struct optee_context_data *ctxdata,
+ u32 session_id)
+{
+ struct optee_session *sess;
+
+ list_for_each_entry(sess, &ctxdata->sess_list, list_node)
+ if (sess->session_id == session_id)
+ return sess;
+ return NULL;
+}
+
+u32 optee_do_call_with_arg(struct tee_context *ctx, phys_addr_t parg)
+{
+ struct optee *optee = tee_get_drvdata(ctx->teedev);
+ struct optee_smc_param param = { };
+ u32 ret;
+ u32 cmdid = OPTEE_SMC_CALL_WITH_ARG;
+
+ reg_pair_from_64(¶m.a1, ¶m.a2, parg);
+ optee_call_lock(&optee->callsync);
+ while (true) {
+ param.a0 = cmdid;
+
+ optee_smc(¶m);
+ ret = param.a0;
+
+ if (ret == OPTEE_SMC_RETURN_EBUSY) {
+ /*
+ * Since secure world returned busy, release the
+ * lock we had when entering this function and wait
+ * for "something to happen" (something else to
+ * exit from secure world and needed resources may
+ * have become available).
+ */
+ optee_call_lock_wait_completion(&optee->callsync);
+ } else if (OPTEE_SMC_RETURN_IS_RPC(ret)) {
+ /*
+ * Process the RPC. We're unlocking the path to
+ * secure world to allow another request while
+ * processing the RPC.
+ */
+ optee_call_unlock(&optee->callsync);
+ cmdid = optee_handle_rpc(ctx, ¶m);
+ optee_call_lock(&optee->callsync);
+ } else {
+ break;
+ }
+ }
+ optee_call_unlock(&optee->callsync);
+ return ret;
+}
+
+int optee_cmd_call_with_arg(struct tee_context *ctx, struct tee_shm *shm,
+ struct opteem_cmd_prefix *arg,
+ struct opteem_cmd_prefix __user *uarg, size_t len)
+{
+ struct optee_context_data *ctxdata = ctx->data;
+ struct tee_shm **put_shm = NULL;
+ struct opteem_arg *opteem_arg;
+ struct opteem_arg __user *opteem_uarg;
+ struct optee_session *sess = NULL;
+ phys_addr_t opteem_parg;
+ size_t opteem_arg_size;
+ int rc;
+ size_t n;
+
+ opteem_arg = (struct opteem_arg *)(arg + 1);
+ opteem_uarg = (struct opteem_arg __user *)(uarg + 1);
+
+ opteem_arg_size = len - sizeof(*arg);
+
+ /* Check that the header is complete */
+ if (opteem_arg_size < sizeof(struct opteem_arg))
+ return -EINVAL;
+ /* Check that there's room for the specified number of params */
+ if (opteem_arg_size != OPTEEM_GET_ARG_SIZE(opteem_arg->num_params))
+ return -EINVAL;
+
+ if (opteem_arg->num_params) {
+ put_shm = kcalloc(opteem_arg->num_params,
+ sizeof(struct tee_shm *), GFP_KERNEL);
+ if (!put_shm)
+ return -ENOMEM;
+ /*
+ * The params are updated with physical addresses and the ref
+ * counters on the shared memory is increased. The shms to
+ * decreased ref counts on when the call is over are stored in
+ * put_shm.
+ */
+ rc = optee_arg_from_user(opteem_arg, opteem_arg_size, put_shm);
+ if (rc)
+ goto out;
+ }
+
+ rc = tee_shm_va2pa(shm, opteem_arg, &opteem_parg);
+ if (rc)
+ goto out;
+
+ switch (opteem_arg->cmd) {
+ case OPTEEM_CMD_OPEN_SESSION:
+ /*
+ * Allocate memory now to be able to store the new session
+ * below.
+ */
+ sess = kzalloc(sizeof(struct optee_session), GFP_KERNEL);
+ if (!sess) {
+ rc = -ENOMEM;
+ goto out;
+ }
+ break;
+ case OPTEEM_CMD_CLOSE_SESSION:
+ /* A session is about to be closed, remove it from the list */
+ mutex_lock(&ctxdata->mutex);
+ sess = find_session(ctxdata, opteem_arg->session);
+ if (sess)
+ list_del(&sess->list_node);
+ mutex_unlock(&ctxdata->mutex);
+ if (!sess) {
+ rc = -EINVAL;
+ goto out;
+ }
+ kfree(sess);
+ sess = NULL;
+ break;
+
+ case OPTEEM_CMD_INVOKE_COMMAND:
+ case OPTEEM_CMD_CANCEL:
+ mutex_lock(&ctxdata->mutex);
+ sess = find_session(ctxdata, opteem_arg->session);
+ mutex_unlock(&ctxdata->mutex);
+ if (!sess) {
+ rc = -EINVAL;
+ goto out;
+ }
+ sess = NULL;
+ break;
+
+ default:
+ rc = -EINVAL;
+ goto out;
+ }
+
+ if (optee_do_call_with_arg(ctx, opteem_parg)) {
+ opteem_arg->ret = TEEC_ERROR_COMMUNICATION;
+ opteem_arg->ret_origin = TEEC_ORIGIN_COMMS;
+ }
+
+ rc = optee_arg_to_user(opteem_arg, opteem_uarg);
+
+ if (sess && opteem_arg->ret == TEEC_SUCCESS) {
+ /* A new session has been created, add it to the list. */
+ sess->session_id = opteem_arg->session;
+ mutex_lock(&ctxdata->mutex);
+ list_add(&sess->list_node, &ctxdata->sess_list);
+ mutex_unlock(&ctxdata->mutex);
+ sess = NULL;
+ }
+out:
+ kfree(sess);
+ if (put_shm) {
+ for (n = 0; n < opteem_arg->num_params; n++)
+ if (put_shm[n])
+ tee_shm_put(put_shm[n]);
+ kfree(put_shm);
+ }
+ return rc;
+}
new file mode 100644
@@ -0,0 +1,509 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/dma-contiguous.h>
+#ifdef CONFIG_OPTEE_USE_CMA
+#include <linux/cma.h>
+#endif
+#include <linux/io.h>
+#include <linux/tee_drv.h>
+#include "optee_private.h"
+#include "optee_smc.h"
+
+#define DRIVER_NAME "optee"
+
+bool optee_param_is(struct opteem_param *param, uint32_t flags)
+{
+ static const u8 attr_flags[] = {
+ [OPTEEM_ATTR_TYPE_NONE] = 0,
+ [OPTEEM_ATTR_TYPE_VALUE_INPUT] = PARAM_VALUE | PARAM_IN,
+ [OPTEEM_ATTR_TYPE_VALUE_OUTPUT] = PARAM_VALUE | PARAM_OUT,
+ [OPTEEM_ATTR_TYPE_VALUE_INOUT] = PARAM_VALUE | PARAM_IN |
+ PARAM_OUT,
+ [OPTEEM_ATTR_TYPE_MEMREF_INPUT] = PARAM_MEMREF | PARAM_IN,
+ [OPTEEM_ATTR_TYPE_MEMREF_OUTPUT] = PARAM_MEMREF | PARAM_OUT,
+ [OPTEEM_ATTR_TYPE_MEMREF_INOUT] = PARAM_MEMREF | PARAM_IN |
+ PARAM_OUT,
+ };
+ int idx = param->attr & OPTEEM_ATTR_TYPE_MASK;
+ u32 masked;
+
+ if (idx >= sizeof(attr_flags))
+ return false;
+
+ masked = attr_flags[idx] & flags;
+ return (masked & PARAM_ANY) && (masked & PARAM_INOUT);
+}
+
+static void optee_get_smc_version(struct optee_smc_param *param)
+{
+ param->a0 = OPTEE_SMC_CALLS_UID;
+ optee_smc(param);
+}
+
+static int optee_get_version(struct tee_context *ctx,
+ struct tee_ioctl_version_data __user *vers)
+{
+ struct optee_smc_param param;
+
+ optee_get_smc_version(¶m);
+ /* The first 4 words in param are the UUID of protocol */
+ return copy_to_user(vers, ¶m, sizeof(*vers));
+}
+
+static int optee_open(struct tee_context *ctx)
+{
+ struct optee_context_data *ctxdata;
+
+ ctxdata = kzalloc(sizeof(*ctxdata), GFP_KERNEL);
+ if (!ctxdata)
+ return -ENOMEM;
+
+ mutex_init(&ctxdata->mutex);
+ INIT_LIST_HEAD(&ctxdata->sess_list);
+
+ ctx->data = ctxdata;
+ return 0;
+}
+
+static void optee_release(struct tee_context *ctx)
+{
+ struct optee_context_data *ctxdata = ctx->data;
+ struct tee_shm *shm;
+ struct opteem_arg *arg = NULL;
+ phys_addr_t parg;
+
+ if (!ctxdata)
+ return;
+
+ shm = tee_shm_alloc(ctx->teedev, sizeof(struct opteem_arg),
+ TEE_SHM_MAPPED);
+ if (!IS_ERR(shm)) {
+ arg = tee_shm_get_va(shm, 0);
+ /*
+ * If va2pa fails for some reason, we can't call
+ * optee_close_session(), only free the memory. Secure OS
+ * will leak sessions and finally refuse more session, but
+ * we will at least let normal world reclaim its memory.
+ */
+ if (!IS_ERR(arg))
+ tee_shm_va2pa(shm, arg, &parg);
+ }
+
+ while (true) {
+ struct optee_session *sess;
+
+ sess = list_first_entry_or_null(&ctxdata->sess_list,
+ struct optee_session,
+ list_node);
+ if (!sess)
+ break;
+ list_del(&sess->list_node);
+ if (!IS_ERR_OR_NULL(arg)) {
+ memset(arg, 0, sizeof(*arg));
+ arg->cmd = OPTEEM_CMD_CLOSE_SESSION;
+ arg->session = sess->session_id;
+ optee_do_call_with_arg(ctx, parg);
+ }
+ kfree(sess);
+ }
+ kfree(ctxdata);
+
+ if (!IS_ERR(shm))
+ tee_shm_free(shm);
+
+ ctx->data = NULL;
+}
+
+static int optee_cmd_raw_fastcall(u32 smc_id, struct opteem_cmd_prefix *arg,
+ size_t len)
+{
+ struct optee_smc_param param = { .a0 = smc_id };
+ u32 *data = (u32 *)(arg + 1);
+ size_t data_len = len - sizeof(*arg);
+
+ if (data_len < 4 * sizeof(u32))
+ return -EINVAL;
+
+ /* This is a fast-call no need to take a mutex */
+
+ optee_smc(¶m);
+ data[0] = param.a0;
+ data[1] = param.a1;
+ data[2] = param.a2;
+ data[3] = param.a3;
+ return 0;
+}
+
+static int optee_cmd(struct tee_context *ctx, void __user *buf, size_t len)
+{
+ struct opteem_cmd_prefix *arg;
+ struct tee_shm *shm;
+ int ret;
+
+ if (len > OPTEE_MAX_ARG_SIZE || len < sizeof(*arg))
+ return -EINVAL;
+
+ shm = tee_shm_alloc(ctx->teedev, len, TEE_SHM_MAPPED);
+ if (IS_ERR(shm))
+ return PTR_ERR(shm);
+
+ arg = tee_shm_get_va(shm, 0);
+ if (IS_ERR(arg) || copy_from_user(arg, buf, len)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ switch (arg->func_id) {
+ case OPTEEM_FUNCID_CALLS_UID:
+ ret = optee_cmd_raw_fastcall(OPTEE_SMC_CALLS_UID, arg, len);
+ break;
+ case OPTEEM_FUNCID_GET_OS_UUID:
+ ret = optee_cmd_raw_fastcall(OPTEE_SMC_CALL_GET_OS_UUID,
+ arg, len);
+ break;
+ case OPTEEM_FUNCID_CALLS_REVISION:
+ ret = optee_cmd_raw_fastcall(OPTEE_SMC_CALLS_REVISION,
+ arg, len);
+ break;
+ case OPTEEM_FUNCID_GET_OS_REVISION:
+ ret = optee_cmd_raw_fastcall(OPTEE_SMC_CALL_GET_OS_REVISION,
+ arg, len);
+ break;
+ case OPTEEM_FUNCID_CALL_WITH_ARG:
+ ret = optee_cmd_call_with_arg(ctx, shm, arg, buf, len);
+ goto out_from_call;
+ default:
+ ret = -EINVAL;
+ goto out;
+ }
+
+out:
+ if (!ret) {
+ if (copy_to_user(buf, arg, len))
+ ret = -EINVAL;
+ }
+out_from_call:
+ tee_shm_free(shm);
+ return ret;
+}
+
+static struct tee_driver_ops optee_ops = {
+ .get_version = optee_get_version,
+ .open = optee_open,
+ .release = optee_release,
+ .cmd = optee_cmd,
+};
+
+static struct tee_desc optee_desc = {
+ .name = DRIVER_NAME "-clnt",
+ .ops = &optee_ops,
+ .owner = THIS_MODULE,
+};
+
+static int optee_supp_req(struct tee_context *ctx, void __user *buf,
+ size_t len)
+{
+ struct opteem_cmd_prefix *arg;
+ struct tee_shm *shm;
+ int ret;
+
+ if (len > OPTEE_MAX_ARG_SIZE || len < sizeof(*arg))
+ return -EINVAL;
+
+ shm = tee_shm_alloc(ctx->teedev, len, TEE_SHM_MAPPED);
+ if (IS_ERR(shm)) {
+ ret = PTR_ERR(shm);
+ goto out;
+ }
+
+ arg = tee_shm_get_va(shm, 0);
+ if (IS_ERR(arg) || copy_from_user(arg, buf, len)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ switch (arg->func_id) {
+ case OPTEEM_FUNCID_CALLS_UID:
+ ret = optee_cmd_raw_fastcall(OPTEE_SMC_CALLS_UID, arg, len);
+ break;
+ case OPTEEM_FUNCID_GET_OS_UUID:
+ ret = optee_cmd_raw_fastcall(OPTEE_SMC_CALL_GET_OS_UUID,
+ arg, len);
+ break;
+ case OPTEEM_FUNCID_CALLS_REVISION:
+ ret = optee_cmd_raw_fastcall(OPTEE_SMC_CALLS_REVISION,
+ arg, len);
+ break;
+ case OPTEEM_FUNCID_GET_OS_REVISION:
+ ret = optee_cmd_raw_fastcall(OPTEE_SMC_CALL_GET_OS_REVISION,
+ arg, len);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ if (ret)
+ goto out;
+
+ if (copy_to_user(buf, arg, len))
+ ret = -EINVAL;
+out:
+ if (!IS_ERR(shm))
+ tee_shm_free(shm);
+ return ret;
+}
+
+static int optee_supp_cmd(struct tee_context *ctx, void __user *buf,
+ size_t len)
+{
+ struct opteem_cmd_prefix arg;
+
+ if (len < sizeof(arg) || copy_from_user(&arg, buf, sizeof(arg)))
+ return -EINVAL;
+
+ switch (arg.func_id) {
+ case OPTEEM_FUNCID_SUPP_CMD_WRITE:
+ return optee_supp_write(ctx, buf + sizeof(arg),
+ len - sizeof(arg));
+ case OPTEEM_FUNCID_SUPP_CMD_READ:
+ return optee_supp_read(ctx, buf + sizeof(arg),
+ len - sizeof(arg));
+ default:
+ return optee_supp_req(ctx, buf, len);
+ }
+}
+
+static struct tee_driver_ops optee_supp_ops = {
+ .get_version = optee_get_version,
+ .open = optee_open,
+ .release = optee_release,
+ .cmd = optee_supp_cmd,
+};
+
+static struct tee_desc optee_supp_desc = {
+ .name = DRIVER_NAME "-supp",
+ .ops = &optee_supp_ops,
+ .owner = THIS_MODULE,
+ .flags = TEE_DESC_PRIVILEGED,
+};
+
+static bool opteem_api_uid_is_optee_api(void)
+{
+ struct optee_smc_param param;
+
+ optee_get_smc_version(¶m);
+
+ if (param.a0 == OPTEEM_UID_0 && param.a1 == OPTEEM_UID_1 &&
+ param.a2 == OPTEEM_UID_2 && param.a3 == OPTEEM_UID_3)
+ return true;
+ return false;
+}
+
+static bool opteem_api_revision_is_compatible(void)
+{
+ struct optee_smc_param param = { .a0 = OPTEE_SMC_CALLS_REVISION };
+
+ optee_smc(¶m);
+
+ if (param.a0 == OPTEEM_REVISION_MAJOR &&
+ (int)param.a1 >= OPTEEM_REVISION_MINOR)
+ return true;
+ return false;
+}
+
+static struct tee_shm_pool *optee_config_shm_ioremap(struct device *dev,
+ void __iomem **ioremaped_shm)
+{
+ struct optee_smc_param param = { .a0 = OPTEE_SMC_GET_SHM_CONFIG };
+ struct tee_shm_pool *pool;
+ u_long vaddr;
+ phys_addr_t paddr;
+ size_t size;
+ phys_addr_t begin;
+ phys_addr_t end;
+ void __iomem *va;
+
+ optee_smc(¶m);
+ if (param.a0 != OPTEE_SMC_RETURN_OK) {
+ dev_info(dev, "shm service not available\n");
+ return ERR_PTR(-ENOENT);
+ }
+
+ if (param.a3 != OPTEE_SMC_SHM_CACHED) {
+ dev_err(dev, "only normal cached shared memory supported\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ begin = roundup(param.a1, PAGE_SIZE);
+ end = rounddown(param.a1 + param.a2, PAGE_SIZE);
+ paddr = begin;
+ size = end - begin;
+
+ va = ioremap_cache(paddr, size);
+ if (!va) {
+ dev_err(dev, "shared memory ioremap failed\n");
+ return ERR_PTR(-EINVAL);
+ }
+ vaddr = (u_long)va;
+
+ pool = tee_shm_pool_alloc_res_mem(dev, vaddr, paddr, size);
+ if (IS_ERR(pool))
+ iounmap(va);
+ else
+ *ioremaped_shm = va;
+ return pool;
+}
+
+#ifdef CONFIG_OPTEE_USE_CMA
+static struct tee_shm_pool *optee_config_shm_cma(struct device *dev)
+{
+ struct optee_smc_param param = { .a0 = OPTEE_SMC_REGISTER_SHM };
+ u_long vaddr;
+ phys_addr_t paddr;
+ size_t size;
+ struct tee_shm_pool *pool;
+
+ pool = tee_shm_pool_alloc(dev, &vaddr, &paddr, &size);
+ if (IS_ERR(pool))
+ return pool;
+
+ reg_pair_from_64(¶m.a1, ¶m.a2, paddr);
+ param.a3 = size;
+ param.a4 = OPTEE_SMC_SHM_CACHED;
+ optee_smc(¶m);
+ if (param.a0 != OPTEE_SMC_RETURN_OK) {
+ dev_err(dev, "can't register shared memory\n");
+ tee_shm_pool_free(pool);
+ return ERR_PTR(-EINVAL);
+ }
+ return pool;
+}
+#else
+static struct tee_shm_pool *optee_config_shm_cma(struct device *dev)
+{
+ return ERR_PTR(-ENOENT);
+}
+#endif
+
+static int optee_probe(struct platform_device *pdev)
+{
+ struct tee_shm_pool *pool;
+ struct optee *optee = NULL;
+ void __iomem *ioremaped_shm = NULL;
+ int rc;
+
+ if (!opteem_api_uid_is_optee_api() ||
+ !opteem_api_revision_is_compatible())
+ return -EINVAL;
+
+ pool = optee_config_shm_ioremap(&pdev->dev, &ioremaped_shm);
+ if (IS_ERR(pool))
+ pool = optee_config_shm_cma(&pdev->dev);
+ if (IS_ERR(pool))
+ return PTR_ERR(pool);
+
+ optee = devm_kzalloc(&pdev->dev, sizeof(*optee), GFP_KERNEL);
+ if (!optee) {
+ rc = -ENOMEM;
+ goto err;
+ }
+
+ optee->dev = &pdev->dev;
+
+ optee->teedev = tee_device_alloc(&optee_desc, &pdev->dev, pool, optee);
+ if (IS_ERR(optee->teedev)) {
+ rc = PTR_ERR(optee->teedev);
+ goto err;
+ }
+
+ optee->supp_teedev = tee_device_alloc(&optee_supp_desc, &pdev->dev,
+ pool, optee);
+ if (IS_ERR(optee->supp_teedev)) {
+ rc = PTR_ERR(optee->supp_teedev);
+ goto err;
+ }
+
+ rc = tee_device_register(optee->teedev);
+ if (rc)
+ goto err;
+
+ rc = tee_device_register(optee->supp_teedev);
+ if (rc)
+ goto err;
+
+ mutex_init(&optee->callsync.mutex);
+ init_completion(&optee->callsync.c);
+ optee->callsync.c_waiters = 0;
+ optee_mutex_wait_init(&optee->mutex_wait);
+ optee_supp_init(&optee->supp);
+ optee->ioremaped_shm = ioremaped_shm;
+ optee->pool = pool;
+
+ platform_set_drvdata(pdev, optee);
+
+ dev_info(&pdev->dev, "initialized driver\n");
+ return 0;
+err:
+ tee_device_unregister(optee->teedev);
+ tee_device_unregister(optee->supp_teedev);
+ if (pool)
+ tee_shm_pool_free(pool);
+ if (ioremaped_shm)
+ iounmap(optee->ioremaped_shm);
+ return rc;
+}
+
+static int optee_remove(struct platform_device *pdev)
+{
+ struct optee *optee = platform_get_drvdata(pdev);
+
+ tee_device_unregister(optee->teedev);
+ tee_device_unregister(optee->supp_teedev);
+ tee_shm_pool_free(optee->pool);
+ if (optee->ioremaped_shm)
+ iounmap(optee->ioremaped_shm);
+ optee_mutex_wait_uninit(&optee->mutex_wait);
+ optee_supp_uninit(&optee->supp);
+ mutex_destroy(&optee->callsync.mutex);
+ return 0;
+}
+
+static const struct of_device_id optee_match[] = {
+ { .compatible = "optee,optee-tz" },
+ {},
+};
+
+static struct platform_driver optee_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .of_match_table = optee_match,
+ },
+ .probe = optee_probe,
+ .remove = optee_remove,
+};
+
+module_platform_driver(optee_driver);
+
+MODULE_AUTHOR("Linaro");
+MODULE_DESCRIPTION("OP-TEE driver");
+MODULE_SUPPORTED_DEVICE("");
+MODULE_VERSION("1.0");
+MODULE_LICENSE("GPL v2");
new file mode 100644
@@ -0,0 +1,138 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef OPTEE_PRIVATE_H
+#define OPTEE_PRIVATE_H
+
+#include <linux/types.h>
+#include <linux/semaphore.h>
+#include <linux/tee_drv.h>
+#include <linux/optee_msg.h>
+
+#define OPTEE_MAX_ARG_SIZE 1024
+
+/* Some Global Platform error codes used in this driver */
+#define TEEC_SUCCESS 0x00000000
+#define TEEC_ERROR_BAD_PARAMETERS 0xFFFF0006
+#define TEEC_ERROR_COMMUNICATION 0xFFFF000E
+#define TEEC_ERROR_OUT_OF_MEMORY 0xFFFF000C
+
+#define TEEC_ORIGIN_COMMS 0x00000002
+
+struct optee_call_sync {
+ struct mutex mutex;
+ struct completion c;
+ int c_waiters;
+};
+
+struct optee_mutex_wait {
+ struct mutex mu;
+ struct list_head db;
+};
+
+struct optee_supp {
+ bool supp_next_write;
+ size_t data_size;
+ const struct opteem_arg *data_to_supp;
+ struct opteem_arg *data_from_supp;
+ struct mutex thrd_mutex;
+ struct mutex supp_mutex;
+ struct semaphore data_to_supp_sem;
+ struct semaphore data_from_supp_sem;
+};
+
+struct optee {
+ struct tee_device *supp_teedev;
+ struct tee_device *teedev;
+ struct device *dev;
+ struct optee_call_sync callsync;
+ struct optee_mutex_wait mutex_wait;
+ struct optee_supp supp;
+ struct tee_shm_pool *pool;
+ void __iomem *ioremaped_shm;
+};
+
+struct optee_session {
+ struct list_head list_node;
+ u32 session_id;
+};
+
+struct optee_context_data {
+ struct mutex mutex;
+ struct list_head sess_list;
+};
+
+/* Note that 32bit arguments are passed also when running in 64bit */
+struct optee_smc_param {
+ u32 a0;
+ u32 a1;
+ u32 a2;
+ u32 a3;
+ u32 a4;
+ u32 a5;
+ u32 a6;
+ u32 a7;
+};
+
+void optee_smc(struct optee_smc_param *param);
+
+u32 optee_handle_rpc(struct tee_context *ctx, struct optee_smc_param *param);
+
+void optee_mutex_wait_init(struct optee_mutex_wait *muw);
+void optee_mutex_wait_uninit(struct optee_mutex_wait *muw);
+
+void optee_supp_thrd_req(struct tee_context *ctx, struct opteem_arg *arg);
+int optee_supp_read(struct tee_context *ctx, void __user *buf, size_t len);
+int optee_supp_write(struct tee_context *ctx, void __user *buf, size_t len);
+void optee_supp_init(struct optee_supp *supp);
+void optee_supp_uninit(struct optee_supp *supp);
+
+
+u32 optee_do_call_with_arg(struct tee_context *ctx, phys_addr_t parg);
+int optee_cmd_call_with_arg(struct tee_context *ctx, struct tee_shm *shm,
+ struct opteem_cmd_prefix *arg,
+ struct opteem_cmd_prefix __user *uarg, size_t len);
+
+/*
+ * Small helpers
+ */
+#define PARAM_VALUE 0x1
+#define PARAM_MEMREF 0x2
+#define PARAM_ANY (PARAM_VALUE | PARAM_MEMREF)
+#define PARAM_IN 0x4
+#define PARAM_OUT 0x8
+#define PARAM_INOUT (PARAM_IN | PARAM_OUT)
+
+/**
+ * optee_param_is() - report kind of opteem parameter
+ * @param: the opteem parameter
+ * @flags: which properties of the parameter to check
+ * @returns true if any of PARAM_VALUE PARAM_MEMREF is satified _and_
+ * any of the PARAM_IN PARAM_OUT is satisfied
+ */
+bool optee_param_is(struct opteem_param *param, uint32_t flags);
+
+static inline void *reg_pair_to_ptr(u32 reg0, u32 reg1)
+{
+ return (void *)(u_long)(((u64)reg0 << 32) | reg1);
+}
+
+static inline void reg_pair_from_64(u32 *reg0, u32 *reg1, u64 val)
+{
+ *reg0 = val >> 32;
+ *reg1 = val;
+}
+
+
+#endif /*OPTEE_PRIVATE_H*/
new file mode 100644
@@ -0,0 +1,510 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef OPTEE_SMC_H
+#define OPTEE_SMC_H
+
+/*
+ * This file is exported by OP-TEE and is in kept in sync between secure
+ * world and normal world kernel driver. We're following ARM SMC Calling
+ * Convention as specified in
+ * http://infocenter.arm.com/help/topic/com.arm.doc.den0028a/index.html
+ *
+ * This file depends on optee_msg.h being included to expand the SMC id
+ * macros below.
+ */
+
+#define OPTEE_SMC_32 0
+#define OPTEE_SMC_64 0x40000000
+#define OPTEE_SMC_FAST_CALL 0x80000000
+#define OPTEE_SMC_STD_CALL 0
+
+#define OPTEE_SMC_OWNER_MASK 0x3F
+#define OPTEE_SMC_OWNER_SHIFT 24
+
+#define OPTEE_SMC_FUNC_MASK 0xFFFF
+
+#define OPTEE_SMC_IS_FAST_CALL(smc_val) ((smc_val) & OPTEE_SMC_FAST_CALL)
+#define OPTEE_SMC_IS_64(smc_val) ((smc_val) & OPTEE_SMC_64)
+#define OPTEE_SMC_FUNC_NUM(smc_val) ((smc_val) & OPTEE_SMC_FUNC_MASK)
+#define OPTEE_SMC_OWNER_NUM(smc_val) \
+ (((smc_val) >> OPTEE_SMC_OWNER_SHIFT) & OPTEE_SMC_OWNER_MASK)
+
+#define OPTEE_SMC_CALL_VAL(type, calling_convention, owner, func_num) \
+ ((type) | (calling_convention) | \
+ (((owner) & OPTEE_SMC_OWNER_MASK) << \
+ OPTEE_SMC_OWNER_SHIFT) |\
+ ((func_num) & OPTEE_SMC_FUNC_MASK))
+
+#define OPTEE_SMC_STD_CALL_VAL(func_num) \
+ OPTEE_SMC_CALL_VAL(OPTEE_SMC_32, OPTEE_SMC_STD_CALL, \
+ OPTEE_SMC_OWNER_TRUSTED_OS, (func_num))
+#define OPTEE_SMC_FAST_CALL_VAL(func_num) \
+ OPTEE_SMC_CALL_VAL(OPTEE_SMC_32, OPTEE_SMC_FAST_CALL, \
+ OPTEE_SMC_OWNER_TRUSTED_OS, (func_num))
+
+#define OPTEE_SMC_OWNER_ARCH 0
+#define OPTEE_SMC_OWNER_CPU 1
+#define OPTEE_SMC_OWNER_SIP 2
+#define OPTEE_SMC_OWNER_OEM 3
+#define OPTEE_SMC_OWNER_STANDARD 4
+#define OPTEE_SMC_OWNER_TRUSTED_APP 48
+#define OPTEE_SMC_OWNER_TRUSTED_OS 50
+
+#define OPTEE_SMC_OWNER_TRUSTED_OS_OPTEED 62
+#define OPTEE_SMC_OWNER_TRUSTED_OS_API 63
+
+/*
+ * Function specified by SMC Calling convention.
+ */
+#define OPTEE_SMC_FUNCID_CALLS_COUNT 0xFF00
+#define OPTEE_SMC_CALLS_COUNT \
+ OPTEE_SMC_CALL_VAL(OPTEE_SMC_32, OPTEE_SMC_FAST_CALL, \
+ OPTEE_SMC_OWNER_TRUSTED_OS_API, \
+ OPTEE_SMC_FUNCID_CALLS_COUNT)
+
+
+/*
+ * Cache settings for shared memory
+ */
+#define OPTEE_SMC_SHM_NONCACHED 0ULL
+#define OPTEE_SMC_SHM_CACHED 1ULL
+
+/*
+ * a0..a7 is used as register names in the descriptions below, on arm32
+ * that translates to r0..r7 and on arm64 to w0..w7. In both cases it's
+ * 32-bit registers.
+ */
+
+/*
+ * Function specified by SMC Calling convention
+ *
+ * Return one of the following UIDs if using API specified in this file
+ * without further extentions:
+ * 65cb6b93-af0c-4617-8ed6-644a8d1140f8
+ * see also OPTEE_SMC_UID_* in optee_msg.h
+ */
+#define OPTEE_SMC_FUNCID_CALLS_UID OPTEEM_FUNCID_CALLS_UID
+#define OPTEE_SMC_CALLS_UID \
+ OPTEE_SMC_CALL_VAL(OPTEE_SMC_32, OPTEE_SMC_FAST_CALL, \
+ OPTEE_SMC_OWNER_TRUSTED_OS_API, \
+ OPTEE_SMC_FUNCID_CALLS_UID)
+
+/*
+ * Function specified by SMC Calling convention
+ *
+ * Returns 2.0 if using API specified in this file without further extentions.
+ * see also OPTEEM_REVISION_* in optee_msg.h
+ */
+#define OPTEE_SMC_FUNCID_CALLS_REVISION OPTEEM_FUNCID_CALLS_REVISION
+#define OPTEE_SMC_CALLS_REVISION \
+ OPTEE_SMC_CALL_VAL(OPTEE_SMC_32, OPTEE_SMC_FAST_CALL, \
+ OPTEE_SMC_OWNER_TRUSTED_OS_API, \
+ OPTEE_SMC_FUNCID_CALLS_REVISION)
+
+/*
+ * Get UUID of Trusted OS.
+ *
+ * Used by non-secure world to figure out which Trusted OS is installed.
+ * Note that returned UUID is the UUID of the Trusted OS, not of the API.
+ *
+ * Returns UUID in a0-4 in the same way as OPTEE_SMC_CALLS_UID
+ * described above.
+ */
+#define OPTEE_SMC_FUNCID_GET_OS_UUID OPTEEM_FUNCID_GET_OS_UUID
+#define OPTEE_SMC_CALL_GET_OS_UUID \
+ OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_OS_UUID)
+
+/*
+ * Get revision of Trusted OS.
+ *
+ * Used by non-secure world to figure out which version of the Trusted OS
+ * is installed. Note that the returned revision is the revision of the
+ * Trusted OS, not of the API.
+ *
+ * Returns revision in a0-1 in the same way as OPTEE_SMC_CALLS_REVISION
+ * described above.
+ */
+#define OPTEE_SMC_FUNCID_GET_OS_REVISION OPTEEM_FUNCID_GET_OS_REVISION
+#define OPTEE_SMC_CALL_GET_OS_REVISION \
+ OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_OS_REVISION)
+
+/*
+ * Call with struct opteem_arg as argument
+ *
+ * Call register usage:
+ * a0 SMC Function ID, OPTEE_SMC*CALL_WITH_ARG
+ * a1 Upper 32bit of a 64bit physical pointer to a struct opteem_arg
+ * a2 Lower 32bit of a 64bit physical pointer to a struct opteem_arg
+ * a3-6 Not used
+ * a7 Hypervisor Client ID register
+ *
+ * Normal return register usage:
+ * a0 Return value, OPTEE_SMC_RETURN_*
+ * a1-3 Not used
+ * a4-7 Preserved
+ *
+ * Ebusy return register usage:
+ * a0 Return value, OPTEE_SMC_RETURN_EBUSY
+ * a1-3 Preserved
+ * a4-7 Preserved
+ *
+ * RPC return register usage:
+ * a0 Return value, OPTEE_SMC_RETURN_IS_RPC(val)
+ * a1-2 RPC parameters
+ * a3-7 Resume information, must be preserved
+ *
+ * Possible return values:
+ * OPTEE_SMC_RETURN_UNKNOWN_FUNCTION Trusted OS does not recognize this
+ * function.
+ * OPTEE_SMC_RETURN_OK Call completed, result updated in
+ * the previously supplied struct
+ * opteem_arg.
+ * OPTEE_SMC_RETURN_EBUSY Trusted OS busy, try again later.
+ * OPTEE_SMC_RETURN_EBADADDR Bad physcial pointer to struct
+ * opteem_arg.
+ * OPTEE_SMC_RETURN_EBADCMD Bad/unknown cmd in struct opteem_arg
+ * OPTEE_SMC_RETURN_IS_RPC() Call suspended by RPC call to normal
+ * world.
+ */
+#define OPTEE_SMC_FUNCID_CALL_WITH_ARG OPTEEM_FUNCID_CALL_WITH_ARG
+#define OPTEE_SMC_CALL_WITH_ARG \
+ OPTEE_SMC_STD_CALL_VAL(OPTEE_SMC_FUNCID_CALL_WITH_ARG)
+/* Same as OPTEE_SMC_CALL_WITH_ARG but a "fast call". */
+#define OPTEE_SMC_FASTCALL_WITH_ARG \
+ OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_CALL_WITH_ARG)
+
+/*
+ * Register a secure/non-secure shared memory region
+ *
+ * Call register usage:
+ * a0 SMC Function ID, OPTEE_SMC*_REGISTER_SHM
+ * a1 Upper 32bits of 64bit physical address of start of SHM
+ * a2 Lower 32bits of 64bit physical address of start of SHM
+ * a3 Size of SHM
+ * a4 Cache settings of memory, as defined by the
+ * OPTEE_SMC_SHM_* values above
+ * a5-6 Not used
+ * a7 Hypervisor Client ID register
+ *
+ * Normal return register usage:
+ * a0 OPTEE_SMC_RETURN_OK if OK
+ * OPTEE_SMC_RETURN_EBUSY can't obtain access to register SHM
+ * OPTEE_SMC_RETURN_ENOMEM not enough memory to register SHM
+ * OPTEE_SMC_RETURN_EBADADDR bad parameters
+ * OPTEE_SMC_RETURN_EBADCMD call not available
+ * a1-2 Not used
+ * a3-7 Preserved
+ */
+#define OPTEE_SMC_FUNCID_REGISTER_SHM 5
+#define OPTEE_SMC_REGISTER_SHM \
+ OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_REGISTER_SHM)
+
+/*
+ * Unregister a secure/non-secure shared memory region
+ *
+ * Call register usage:
+ * a0 SMC Function ID, OPTEE_SMC*_*UNREGISTER_SHM
+ * a1 Upper 32bits of 64bit physical address of start of SHM
+ * a2 Lower 32bits of 64bit physical address of start of SHM
+ * a3 Size of SHM
+ * a3-6 Not used
+ * a7 Hypervisor Client ID register
+ *
+ * Normal return register usage:
+ * a00 OPTEE_SMC_RETURN_OK if OK
+ * OPTEE_SMC_RETURN_EBUSY can't obtain access to register SHM
+ * OPTEE_SMC_RETURN_ENOMEM not enough memory to register SHM
+ * OPTEE_SMC_RETURN_EBADCMD call not available
+ * a1-3 Not used
+ * a4-7 Preserved
+ */
+#define OPTEE_SMC_FUNCID_UNREGISTER_SHM 6
+#define OPTEE_SMC_UNREGISTER_SHM \
+ OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_UNREGISTER_SHM)
+
+/*
+ * Get Shared Memory Config
+ *
+ * Returns the Secure/Non-secure shared memory config.
+ *
+ * Call register usage:
+ * a0 SMC Function ID, OPTEE_SMC_GET_SHM_CONFIG
+ * a1-6 Not used
+ * a7 Hypervisor Client ID register
+ *
+ * Have config return register usage:
+ * a0 OPTEE_SMC_RETURN_OK
+ * a1 Physical address of start of SHM
+ * a2 Size of of SHM
+ * a3 Cache settings of memory, as defined by the
+ * OPTEE_SMC_SHM_* values above
+ * a4-7 Preserved
+ *
+ * Not available register usage:
+ * a0 OPTEE_SMC_RETURN_NOTAVAIL
+ * a1-3 Not used
+ * a4-7 Preserved
+ */
+#define OPTEE_SMC_FUNCID_GET_SHM_CONFIG 7
+#define OPTEE_SMC_GET_SHM_CONFIG \
+ OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_SHM_CONFIG)
+
+/*
+ * Configures L2CC mutex
+ *
+ * Disables, enables usage of L2CC mutex. Returns or sets physical address
+ * of L2CC mutex.
+ *
+ * Call register usage:
+ * a0 SMC Function ID, OPTEE_SMC_L2CC_MUTEX
+ * a1 OPTEE_SMC_L2CC_MUTEX_GET_ADDR Get physical address of mutex
+ * OPTEE_SMC_L2CC_MUTEX_SET_ADDR Set physical address of mutex
+ * OPTEE_SMC_L2CC_MUTEX_ENABLE Enable usage of mutex
+ * OPTEE_SMC_L2CC_MUTEX_DISABLE Disable usage of mutex
+ * a2 if a1 == OPTEE_SMC_L2CC_MUTEX_SET_ADDR, physical address of mutex
+ * a3-6 Not used
+ * a7 Hypervisor Client ID register
+ *
+ * Have config return register usage:
+ * a0 OPTEE_SMC_RETURN_OK
+ * a1 Preserved
+ * a2 if a1 == OPTEE_SMC_L2CC_MUTEX_GET_ADDR, physical address of L2CC mutex
+ * a3-7 Preserved
+ *
+ * Error return register usage:
+ * a0 OPTEE_SMC_RETURN_NOTAVAIL Physical address not available
+ * OPTEE_SMC_RETURN_EBADADDR Bad supplied physical address
+ * OPTEE_SMC_RETURN_EBADCMD Unsupported value in a1
+ * a1-7 Preserved
+ */
+#define OPTEE_SMC_L2CC_MUTEX_GET_ADDR 0
+#define OPTEE_SMC_L2CC_MUTEX_SET_ADDR 1
+#define OPTEE_SMC_L2CC_MUTEX_ENABLE 2
+#define OPTEE_SMC_L2CC_MUTEX_DISABLE 3
+#define OPTEE_SMC_FUNCID_L2CC_MUTEX 8
+#define OPTEE_SMC_L2CC_MUTEX \
+ OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_L2CC_MUTEX)
+
+/*
+ * Resume from RPC (for example after processing an IRQ)
+ *
+ * Call register usage:
+ * a0 SMC Function ID, OPTEE_SMC_CALL_RETURN_FROM_RPC
+ * a1-3 Value of a1-3 when OPTEE_SMC_CALL_WITH_ARG returned
+ * OPTEE_SMC_RETURN_RPC in a0
+ *
+ * Return register usage is the same as for OPTEE_SMC_*CALL_WITH_ARG above.
+ *
+ * Possible return values
+ * OPTEE_SMC_RETURN_UNKNOWN_FUNCTION Trusted OS does not recognize this
+ * function.
+ * OPTEE_SMC_RETURN_OK Original call completed, result
+ * updated in the previously supplied.
+ * struct opteem_arg
+ * OPTEE_SMC_RETURN_RPC Call suspended by RPC call to normal
+ * world.
+ * OPTEE_SMC_RETURN_EBUSY Trusted OS busy, try again later.
+ * OPTEE_SMC_RETURN_ERESUME Resume failed, the opaque resume
+ * information was corrupt.
+ */
+#define OPTEE_SMC_FUNCID_RETURN_FROM_RPC 3
+#define OPTEE_SMC_CALL_RETURN_FROM_RPC \
+ OPTEE_SMC_STD_CALL_VAL(OPTEE_SMC_FUNCID_RETURN_FROM_RPC)
+
+#define OPTEE_SMC_RETURN_RPC_PREFIX_MASK 0xFFFF0000
+#define OPTEE_SMC_RETURN_RPC_PREFIX 0xFFFF0000
+#define OPTEE_SMC_RETURN_RPC_FUNC_MASK 0x0000FFFF
+
+#define OPTEE_SMC_RETURN_GET_RPC_FUNC(ret) \
+ ((ret) & OPTEE_SMC_RETURN_RPC_FUNC_MASK)
+
+#define OPTEE_SMC_RPC_VAL(func) ((func) | OPTEE_SMC_RETURN_RPC_PREFIX)
+
+/*
+ * Allocate argument memory for RPC parameter passing.
+ * Argument memory is used to hold a struct opteem_arg.
+ *
+ * "Call" register usage:
+ * a0 This value, OPTEE_SMC_RETURN_RPC_ALLOC_ARG
+ * a1 Size in bytes of required argument memory
+ * a2 Not used
+ * a3 Resume information, must be preserved
+ * a4-5 Not used
+ * a6-7 Resume information, must be preserved
+ *
+ * "Return" register usage:
+ * a0 SMC Function ID, OPTEE_SMC_CALL_RETURN_FROM_RPC.
+ * a1 Upper 32bits of 64bit physical pointer to allocated argument
+ * memory, (a1 == 0 && a2 == 0) if size was 0 or if memory can't
+ * be allocated.
+ * a2 Lower 32bits of 64bit physical pointer to allocated argument
+ * memory, (a1 == 0 && a2 == 0) if size was 0 or if memory can't
+ * be allocated
+ * a3 Preserved
+ * a4 Upper 32bits of 64bit Shared memory cookie used when freeing
+ * the memory or doing an RPC
+ * a5 Lower 32bits of 64bit Shared memory cookie used when freeing
+ * the memory or doing an RPC
+ * a6-7 Preserved
+ */
+#define OPTEE_SMC_RPC_FUNC_ALLOC_ARG 0
+#define OPTEE_SMC_RETURN_RPC_ALLOC_ARG \
+ OPTEE_SMC_RPC_VAL(OPTEE_SMC_RPC_FUNC_ALLOC_ARG)
+
+/*
+ * Allocate payload memory for RPC parameter passing.
+ * Payload memory is used to hold the memory referred to by struct
+ * opteem_param_memref.
+ *
+ * "Call" register usage:
+ * a0 This value, OPTEE_SMC_RETURN_RPC_ALLOC_PAYLOAD
+ * a1 Size in bytes of required argument memory
+ * a2 Not used
+ * a3 Resume information, must be preserved
+ * a4-5 Not used
+ * a6-7 Resume information, must be preserved
+ *
+ * "Return" register usage:
+ * a0 SMC Function ID, OPTEE_SMC_CALL_RETURN_FROM_RPC.
+ * a1 Upper 32bits of 64bit physical pointer to allocated argument
+ * memory, (a1 == 0 && a2 == 0) if size was 0 or if memory can't
+ * be allocated
+ * a2 Lower 32bits of 64bit physical pointer to allocated argument
+ * memory, (a1 == 0 && a2 == 0) if size was 0 or if memory can't
+ * be allocated
+ * a3 Preserved
+ * a4 Upper 32bits of 64bit Shared memory cookie used when freeing
+ * the memory
+ * a5 Lower 32bits of 64bit Shared memory cookie used when freeing
+ * the memory
+ * a6-7 Preserved
+ */
+#define OPTEE_SMC_RPC_FUNC_ALLOC_PAYLOAD 1
+#define OPTEE_SMC_RETURN_RPC_ALLOC_PAYLOAD \
+ OPTEE_SMC_RPC_VAL(OPTEE_SMC_RPC_FUNC_ALLOC_PAYLOAD)
+
+/*
+ * Free memory previously allocated by OPTEE_SMC_RETURN_RPC_ALLOC_ARG.
+ *
+ * "Call" register usage:
+ * a0 This value, OPTEE_SMC_RETURN_RPC_FREE_ARG
+ * a1 Upper 32bits of 64bit shared memory cookie belonging to this
+ * argument memory
+ * a2 Lower 32bits of 64bit shared memory cookie belonging to this
+ * argument memory
+ * a3-7 Resume information, must be preserved
+ *
+ * "Return" register usage:
+ * a0 SMC Function ID, OPTEE_SMC_CALL_RETURN_FROM_RPC.
+ * a1-2 Not used
+ * a3-7 Preserved
+ */
+#define OPTEE_SMC_RPC_FUNC_FREE_ARG 2
+#define OPTEE_SMC_RETURN_RPC_FREE_ARG \
+ OPTEE_SMC_RPC_VAL(OPTEE_SMC_RPC_FUNC_FREE_ARG)
+
+/*
+ * Free memory previously allocated by OPTEE_SMC_RETURN_RPC_ALLOC_PAYLOAD.
+ *
+ * "Call" register usage:
+ * a0 This value, OPTEE_SMC_RETURN_RPC_FREE_PAYLOAD
+ * a1 Upper 32bit of 64bit shared memory cookie belonging to this
+ * payload memory
+ * a2 Lower 32bit of 64bit shared memory cookie belonging to this
+ * payload memory
+ * a3-7 Resume information, must be preserved
+ *
+ * "Return" register usage:
+ * a0 SMC Function ID, OPTEE_SMC_CALL_RETURN_FROM_RPC.
+ * a1-2 Not used
+ * a3-7 Preserved
+ */
+#define OPTEE_SMC_RPC_FUNC_FREE_PAYLOAD 3
+#define OPTEE_SMC_RETURN_RPC_FREE_PAYLOAD \
+ OPTEE_SMC_RPC_VAL(OPTEE_SMC_RPC_FUNC_FREE_PAYLOAD)
+
+/*
+ * Deliver an IRQ in normal world.
+ *
+ * "Call" register usage:
+ * a0 OPTEE_SMC_RETURN_RPC_IRQ
+ * a1-7 Resume information, must be preserved
+ *
+ * "Return" register usage:
+ * a0 SMC Function ID, OPTEE_SMC_CALL_RETURN_FROM_RPC.
+ * a1-7 Preserved
+ */
+#define OPTEE_SMC_RPC_FUNC_IRQ 4
+#define OPTEE_SMC_RETURN_RPC_IRQ \
+ OPTEE_SMC_RPC_VAL(OPTEE_SMC_RPC_FUNC_IRQ)
+
+/*
+ * Do an RPC request. The supplied struct opteem_arg tells which
+ * request to do and the parameters for the request. The following fields
+ * are used (the rest are unused):
+ * - cmd the Request ID
+ * - ret return value of the request, filled in by normal world
+ * - num_params number of parameters for the request
+ * - params the parameters
+ * - param_attrs attributes of the parameters
+ *
+ * "Call" register usage:
+ * a0 OPTEE_SMC_RETURN_RPC_CMD
+ * a1 Upper 32bit of a 64bit Shared memory cookie holding a
+ * struct opteem_arg, must be preserved, only the data should
+ * be updated
+ * a2 Lower 32bit of a 64bit Shared memory cookie holding a
+ * struct opteem_arg, must be preserved, only the data should
+ * be updated
+ * a3-7 Resume information, must be preserved
+ *
+ * "Return" register usage:
+ * a0 SMC Function ID, OPTEE_SMC_CALL_RETURN_FROM_RPC.
+ * a1-2 Not used
+ * a3-7 Preserved
+ */
+#define OPTEE_SMC_RPC_FUNC_CMD 5
+#define OPTEE_SMC_RETURN_RPC_CMD \
+ OPTEE_SMC_RPC_VAL(OPTEE_SMC_RPC_FUNC_CMD)
+
+/* Returned in a0 */
+#define OPTEE_SMC_RETURN_UNKNOWN_FUNCTION 0xFFFFFFFF
+
+/* Returned in a0 only from Trusted OS functions */
+#define OPTEE_SMC_RETURN_OK 0x0
+#define OPTEE_SMC_RETURN_EBUSY 0x1
+#define OPTEE_SMC_RETURN_ERESUME 0x2
+#define OPTEE_SMC_RETURN_EBADADDR 0x3
+#define OPTEE_SMC_RETURN_EBADCMD 0x4
+#define OPTEE_SMC_RETURN_ENOMEM 0x5
+#define OPTEE_SMC_RETURN_NOTAVAIL 0x6
+#define OPTEE_SMC_RETURN_IS_RPC(ret) \
+ (((ret) != OPTEE_SMC_RETURN_UNKNOWN_FUNCTION) && \
+ ((((ret) & OPTEE_SMC_RETURN_RPC_PREFIX_MASK) == \
+ OPTEE_SMC_RETURN_RPC_PREFIX)))
+
+#endif /* OPTEE_SMC_H */
new file mode 100644
@@ -0,0 +1,282 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/tee_drv.h>
+#include "optee_private.h"
+#include "optee_smc.h"
+
+struct optee_mutex_wait_entry {
+ struct list_head link;
+ struct completion comp;
+ struct mutex mu;
+ u32 wait_after;
+ u32 key;
+};
+
+/*
+ * Compares two serial numbers using Serial Number Arithmetic
+ * (https://www.ietf.org/rfc/rfc1982.txt).
+ */
+#define TICK_GT(t1, t2) \
+ (((t1) < (t2) && (t2) - (t1) > 0xFFFFFFFFu) || \
+ ((t1) > (t2) && (t1) - (t2) < 0xFFFFFFFFu))
+
+static struct optee_mutex_wait_entry *muw_find_entry(
+ struct optee_mutex_wait *muw, u32 key)
+{
+ struct optee_mutex_wait_entry *w;
+
+ mutex_lock(&muw->mu);
+
+ list_for_each_entry(w, &muw->db, link)
+ if (w->key == key)
+ goto out;
+
+ w = kmalloc(sizeof(struct optee_mutex_wait), GFP_KERNEL);
+ if (!w)
+ goto out;
+
+ init_completion(&w->comp);
+ mutex_init(&w->mu);
+ w->wait_after = 0;
+ w->key = key;
+ list_add_tail(&w->link, &muw->db);
+out:
+ mutex_unlock(&muw->mu);
+ return w;
+}
+
+static void muw_delete_entry(struct optee_mutex_wait_entry *w)
+{
+ list_del(&w->link);
+ mutex_destroy(&w->mu);
+ kfree(w);
+}
+
+static void muw_delete(struct optee_mutex_wait *muw, u32 key)
+{
+ struct optee_mutex_wait_entry *w;
+
+ mutex_lock(&muw->mu);
+
+ list_for_each_entry(w, &muw->db, link) {
+ if (w->key == key) {
+ muw_delete_entry(w);
+ break;
+ }
+ }
+
+ mutex_unlock(&muw->mu);
+}
+
+static void muw_wakeup(struct optee_mutex_wait *muw, u32 key,
+ u32 wait_after)
+{
+ struct optee_mutex_wait_entry *w = muw_find_entry(muw, key);
+
+ if (!w)
+ return;
+
+ mutex_lock(&w->mu);
+ w->wait_after = wait_after;
+ mutex_unlock(&w->mu);
+ complete(&w->comp);
+}
+
+static void muw_sleep(struct optee_mutex_wait *muw, u32 key, u32 wait_tick)
+{
+ struct optee_mutex_wait_entry *w = muw_find_entry(muw, key);
+ u32 wait_after;
+
+ if (!w)
+ return;
+
+ mutex_lock(&w->mu);
+ wait_after = w->wait_after;
+ mutex_unlock(&w->mu);
+
+ /*
+ * Only wait if the wait_tick is larger than wait_after, that is
+ * the mutex_wait hasn't been updated while this function was about
+ * to be called.
+ */
+ if (TICK_GT(wait_tick, wait_after))
+ wait_for_completion_timeout(&w->comp, HZ);
+}
+
+void optee_mutex_wait_init(struct optee_mutex_wait *muw)
+{
+ mutex_init(&muw->mu);
+ INIT_LIST_HEAD(&muw->db);
+}
+
+void optee_mutex_wait_uninit(struct optee_mutex_wait *muw)
+{
+ /*
+ * It's the callers responsibility to ensure that no one is using
+ * anything inside muw.
+ */
+
+ mutex_destroy(&muw->mu);
+ while (!list_empty(&muw->db)) {
+ struct optee_mutex_wait_entry *w;
+
+ w = list_first_entry(&muw->db, struct optee_mutex_wait_entry,
+ link);
+ muw_delete_entry(w);
+ }
+}
+
+static void handle_rpc_func_cmd_mutex_wait(struct optee *optee,
+ struct opteem_arg *arg)
+{
+ struct opteem_param *params;
+
+ if (arg->num_params != OPTEEM_RPC_NUM_PARAMS)
+ goto bad;
+
+ params = OPTEEM_GET_PARAMS(arg);
+
+ if ((params[0].attr & OPTEEM_ATTR_TYPE_MASK) !=
+ OPTEEM_ATTR_TYPE_VALUE_INPUT)
+ goto bad;
+ if (params[1].attr != OPTEEM_ATTR_TYPE_NONE)
+ goto bad;
+
+ switch (arg->func) {
+ case OPTEEM_RPC_SLEEP_MUTEX_WAIT:
+ muw_sleep(&optee->mutex_wait, params[0].u.value.a,
+ params[0].u.value.b);
+ break;
+ case OPTEEM_RPC_SLEEP_MUTEX_WAKEUP:
+ muw_wakeup(&optee->mutex_wait, params[0].u.value.a,
+ params[0].u.value.b);
+ break;
+ case OPTEEM_RPC_SLEEP_MUTEX_DELETE:
+ muw_delete(&optee->mutex_wait, params[0].u.value.a);
+ break;
+ default:
+ goto bad;
+ }
+
+ arg->ret = TEEC_SUCCESS;
+ return;
+bad:
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+}
+
+static void handle_rpc_func_cmd_wait(struct opteem_arg *arg)
+{
+ struct opteem_param *params;
+ u32 msec_to_wait;
+
+ if (arg->num_params != OPTEEM_RPC_NUM_PARAMS)
+ goto bad;
+
+ params = OPTEEM_GET_PARAMS(arg);
+ if (params[0].attr != OPTEEM_ATTR_TYPE_VALUE_INPUT)
+ goto bad;
+
+ msec_to_wait = params[0].u.value.a;
+
+ /* set task's state to interruptible sleep */
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ /* take a nap */
+ schedule_timeout(msecs_to_jiffies(msec_to_wait));
+
+ arg->ret = TEEC_SUCCESS;
+ return;
+bad:
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+}
+
+static void handle_rpc_func_cmd(struct tee_context *ctx, struct optee *optee,
+ struct tee_shm *shm)
+{
+ struct opteem_arg *arg;
+
+ arg = tee_shm_get_va(shm, 0);
+ if (IS_ERR(arg)) {
+ dev_err(optee->dev, "%s: tee_shm_get_va %p failed\n",
+ __func__, shm);
+ return;
+ }
+
+ switch (arg->cmd) {
+ case OPTEEM_RPC_CMD_SLEEP_MUTEX:
+ handle_rpc_func_cmd_mutex_wait(optee, arg);
+ break;
+ case OPTEEM_RPC_CMD_SUSPEND:
+ handle_rpc_func_cmd_wait(arg);
+ break;
+ default:
+ optee_supp_thrd_req(ctx, arg);
+ }
+}
+
+u32 optee_handle_rpc(struct tee_context *ctx, struct optee_smc_param *param)
+{
+ struct tee_device *teedev = ctx->teedev;
+ struct optee *optee = tee_get_drvdata(teedev);
+ struct tee_shm *shm;
+ phys_addr_t pa;
+
+ switch (OPTEE_SMC_RETURN_GET_RPC_FUNC(param->a0)) {
+ case OPTEE_SMC_RPC_FUNC_ALLOC_ARG:
+ shm = tee_shm_alloc(teedev, param->a1, TEE_SHM_MAPPED);
+ if (!IS_ERR(shm) && !tee_shm_get_pa(shm, 0, &pa)) {
+ reg_pair_from_64(¶m->a1, ¶m->a2, pa);
+ reg_pair_from_64(¶m->a4, ¶m->a5, (u_long)shm);
+ } else {
+ param->a1 = 0;
+ param->a2 = 0;
+ param->a4 = 0;
+ param->a5 = 0;
+ }
+ break;
+ case OPTEE_SMC_RPC_FUNC_ALLOC_PAYLOAD:
+ shm = tee_shm_alloc(teedev, param->a1,
+ TEE_SHM_MAPPED | TEE_SHM_DMA_BUF);
+ if (!IS_ERR(shm) && !tee_shm_get_pa(shm, 0, &pa)) {
+ reg_pair_from_64(¶m->a1, ¶m->a2, pa);
+ reg_pair_from_64(¶m->a4, ¶m->a5, (u_long)shm);
+ } else {
+ param->a1 = 0;
+ param->a2 = 0;
+ param->a4 = 0;
+ param->a5 = 0;
+ }
+ break;
+ case OPTEE_SMC_RPC_FUNC_FREE_ARG:
+ case OPTEE_SMC_RPC_FUNC_FREE_PAYLOAD:
+ shm = reg_pair_to_ptr(param->a1, param->a2);
+ tee_shm_free(shm);
+ break;
+ case OPTEE_SMC_RPC_FUNC_IRQ:
+ break;
+ case OPTEE_SMC_RPC_FUNC_CMD:
+ shm = reg_pair_to_ptr(param->a1, param->a2);
+ handle_rpc_func_cmd(ctx, optee, shm);
+ break;
+ default:
+ dev_warn(optee->dev, "Unknown RPC func 0x%x\n",
+ (u32)OPTEE_SMC_RETURN_GET_RPC_FUNC(param->a0));
+ break;
+ }
+
+ return OPTEE_SMC_CALL_RETURN_FROM_RPC;
+}
new file mode 100644
@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/linkage.h>
+
+ .text
+ .balign 4
+ .code 32
+
+ /* void optee_smc(struct optee_smc_param *param); */
+ .globl optee_smc
+ENTRY(optee_smc)
+ push {r4-r8, lr}
+ mov r8, r0
+ ldm r8, {r0-r7}
+.arch_extension sec
+ smc #0
+ stm r8, {r0-r7}
+ pop {r4-r8, pc}
+ENDPROC(optee_smc)
new file mode 100644
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License Version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/linkage.h>
+
+ .text
+
+#define SMC_PARAM_W0_OFFS 0
+#define SMC_PARAM_W2_OFFS 8
+#define SMC_PARAM_W4_OFFS 16
+#define SMC_PARAM_W6_OFFS 24
+
+ /* void optee_smc(struct smc_param *param); */
+ .globl optee_smc
+ENTRY(optee_smc)
+ stp x28, x30, [sp, #-16]!
+ mov x28, x0
+ ldp w0, w1, [x28, #SMC_PARAM_W0_OFFS]
+ ldp w2, w3, [x28, #SMC_PARAM_W2_OFFS]
+ ldp w4, w5, [x28, #SMC_PARAM_W4_OFFS]
+ ldp w6, w7, [x28, #SMC_PARAM_W6_OFFS]
+ smc #0
+ stp w0, w1, [x28, #SMC_PARAM_W0_OFFS]
+ stp w2, w3, [x28, #SMC_PARAM_W2_OFFS]
+ ldp x28, x30, [sp], #16
+ ret
+ENDPROC(optee_smc)
new file mode 100644
@@ -0,0 +1,327 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include "optee_private.h"
+
+void optee_supp_init(struct optee_supp *supp)
+{
+ memset(supp, 0, sizeof(*supp));
+ mutex_init(&supp->thrd_mutex);
+ mutex_init(&supp->supp_mutex);
+ sema_init(&supp->data_to_supp_sem, 0);
+ sema_init(&supp->data_from_supp_sem, 0);
+}
+
+void optee_supp_uninit(struct optee_supp *supp)
+{
+ mutex_destroy(&supp->thrd_mutex);
+ mutex_destroy(&supp->supp_mutex);
+}
+
+static void optee_supp_send(struct optee *optee,
+ const struct opteem_arg *arg,
+ struct opteem_arg *resp)
+{
+ struct optee_supp *supp = &optee->supp;
+
+ /*
+ * Other threads blocks here until we've copied our answer from
+ * supplicant.
+ */
+ mutex_lock(&supp->thrd_mutex);
+
+ /*
+ * We have exclusive access to data_to_supp and data_from_supp
+ * since the supplicant is at this point either trying to down()
+ * data_to_supp_sem or still in userspace about to do the ioctl()
+ * to enter optee_supp_read() below.
+ */
+
+ supp->data_to_supp = arg;
+ supp->data_from_supp = resp;
+
+ /* Let supplicant get the data */
+ up(&supp->data_to_supp_sem);
+
+ /*
+ * Wait for supplicant to process and return result, once we've
+ * down()'ed data_from_supp_sem we have exclusive access again.
+ */
+ down(&supp->data_from_supp_sem);
+
+ /* We're done, let someone else talk to the supplicant now. */
+ mutex_unlock(&supp->thrd_mutex);
+}
+
+static void copy_back_outdata(struct opteem_arg *arg,
+ const struct opteem_arg *resp)
+{
+ struct opteem_param *arg_params = OPTEEM_GET_PARAMS(arg);
+ struct opteem_param *resp_params = OPTEEM_GET_PARAMS(resp);
+ size_t n;
+
+ /* Copy back out and inout parameters */
+ for (n = 0; n < arg->num_params; n++) {
+ struct opteem_param *ap = arg_params + n;
+
+ if (optee_param_is(ap, PARAM_VALUE | PARAM_OUT))
+ ap->u.value = resp_params[n].u.value;
+ else if (optee_param_is(ap, PARAM_MEMREF | PARAM_OUT))
+ ap->u.memref.size = resp_params[n].u.memref.size;
+ }
+ arg->ret = resp->ret;
+
+}
+
+void optee_supp_thrd_req(struct tee_context *ctx, struct opteem_arg *arg)
+{
+ struct optee *optee = tee_get_drvdata(ctx->teedev);
+ const size_t s = OPTEEM_GET_ARG_SIZE(OPTEEM_RPC_NUM_PARAMS);
+ struct opteem_arg *resp;
+
+ if (arg->num_params != OPTEEM_RPC_NUM_PARAMS) {
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+ return;
+ }
+
+ resp = kzalloc(s, GFP_KERNEL);
+ if (!resp) {
+ arg->ret = TEEC_ERROR_OUT_OF_MEMORY;
+ return;
+ }
+
+ optee_supp_send(optee, arg, resp);
+ copy_back_outdata(arg, resp);
+
+ kfree(resp);
+}
+
+static u32 memref_to_user(struct tee_shm *shm,
+ struct opteem_param_memref *ph_mem,
+ struct opteem_param_memref *user_mem, int *fd)
+{
+ int res;
+ phys_addr_t pa;
+
+ if (!shm) {
+ *fd = -1;
+ return TEEC_SUCCESS;
+ }
+
+ res = tee_shm_get_pa(shm, 0, &pa);
+ if (res)
+ return TEEC_ERROR_BAD_PARAMETERS;
+
+ if (pa > ph_mem->buf_ptr)
+ return TEEC_ERROR_BAD_PARAMETERS;
+
+ user_mem->buf_ptr = ph_mem->buf_ptr - pa;
+ res = tee_shm_get_fd(shm);
+ if (res < 0)
+ return TEEC_ERROR_OUT_OF_MEMORY;
+
+ *fd = res;
+ return TEEC_SUCCESS;
+}
+
+static int optee_supp_copy_to_user(void __user *buf,
+ const struct opteem_arg *arg, struct opteem_arg *tmp)
+{
+ size_t s = OPTEEM_GET_ARG_SIZE(OPTEEM_RPC_NUM_PARAMS);
+ struct opteem_param *arg_params;
+ struct opteem_param *tmp_params;
+ size_t n;
+ int ret;
+
+ memcpy(tmp, arg, s);
+ arg_params = OPTEEM_GET_PARAMS(arg);
+ tmp_params = OPTEEM_GET_PARAMS(tmp);
+
+ for (n = 0; n < arg->num_params; n++) {
+ if (optee_param_is(arg_params + n, PARAM_MEMREF | PARAM_INOUT))
+ tmp_params[n].u.memref.shm_ref = -1;
+ }
+
+ for (n = 0; n < arg->num_params; n++) {
+ if (optee_param_is(arg_params + n,
+ PARAM_MEMREF | PARAM_INOUT)) {
+ int fd = -1;
+ struct tee_shm *shm;
+ uint32_t res;
+ struct opteem_param_memref *memref;
+
+ memref = &arg_params[n].u.memref;
+ shm = (struct tee_shm *)(uintptr_t)memref->shm_ref;
+ res = memref_to_user(shm, memref,
+ &tmp_params[n].u.memref, &fd);
+ /* Propagate kind of error to requesting thread. */
+ if (res != TEEC_SUCCESS) {
+ tmp->ret = res;
+ if (res == TEEC_ERROR_OUT_OF_MEMORY) {
+ /*
+ * For out of memory it could help
+ * if tee-supplicant was restarted,
+ * maybe it leaks something.
+ */
+ ret = -ENOMEM;
+ goto err;
+ }
+ /* Let supplicant grab next request. */
+ ret = -EAGAIN;
+ }
+ tmp_params[n].u.memref.shm_ref = fd;
+ }
+ }
+
+ if (copy_to_user(buf, tmp, s)) {
+ /* Something is wrong, let supplicant restart and try again */
+ ret = -EINVAL;
+ goto err;
+ }
+ return 0;
+err:
+ for (n = 0; n < arg->num_params; n++) {
+ int fd;
+
+ if (!optee_param_is(arg_params + n, PARAM_MEMREF | PARAM_INOUT))
+ continue;
+ fd = tmp_params[n].u.memref.shm_ref;
+ if (fd >= 0)
+ tee_shm_put_fd(fd);
+ }
+ return ret;
+}
+
+int optee_supp_read(struct tee_context *ctx, void __user *buf, size_t len)
+{
+ struct tee_device *teedev = ctx->teedev;
+ struct optee *optee = tee_get_drvdata(teedev);
+ struct optee_supp *supp = &optee->supp;
+ const size_t s = OPTEEM_GET_ARG_SIZE(OPTEEM_RPC_NUM_PARAMS);
+ int ret;
+
+ if (len != s)
+ return -EINVAL;
+
+ /*
+ * In case two supplicants or two threads in one supplicant is
+ * calling this function simultaneously we need to protect the
+ * data with a mutex which we'll release before returning.
+ */
+ mutex_lock(&supp->supp_mutex);
+ while (true) {
+ if (supp->supp_next_write) {
+ /*
+ * optee_supp_read() has been called again without
+ * a optee_supp_write() in between. Supplicant has
+ * probably been restarted before it was able to
+ * write back last result. Abort last request and
+ * wait for a new.
+ */
+ if (supp->data_to_supp) {
+ memcpy(supp->data_from_supp,
+ supp->data_to_supp, s);
+ supp->data_from_supp->ret =
+ TEEC_ERROR_COMMUNICATION;
+ supp->data_to_supp = NULL;
+ supp->supp_next_write = false;
+ up(&supp->data_from_supp_sem);
+ }
+ }
+
+ /*
+ * This is where supplicant will be hanging most of the
+ * time, let's make this interruptable so we can easily
+ * restart supplicant if needed.
+ */
+ if (down_interruptible(&supp->data_to_supp_sem)) {
+ ret = -ERESTARTSYS;
+ goto out;
+ }
+
+ /* We have exlusive access to the data */
+ ret = optee_supp_copy_to_user(buf, supp->data_to_supp,
+ supp->data_from_supp);
+ if (!ret)
+ break;
+ supp->data_to_supp = NULL;
+ up(&supp->data_from_supp_sem);
+ if (ret != -EAGAIN)
+ goto out;
+ }
+
+ /* We've consumed the data, set it to NULL */
+ supp->data_to_supp = NULL;
+
+ /* Allow optee_supp_write() below to do its work */
+ supp->supp_next_write = true;
+
+ ret = 0;
+out:
+ mutex_unlock(&supp->supp_mutex);
+ return ret;
+}
+
+int optee_supp_write(struct tee_context *ctx, void __user *buf, size_t len)
+{
+ struct tee_device *teedev = ctx->teedev;
+ struct optee *optee = tee_get_drvdata(teedev);
+ struct optee_supp *supp = &optee->supp;
+ const size_t s = OPTEEM_GET_ARG_SIZE(OPTEEM_RPC_NUM_PARAMS);
+ int ret = 0;
+
+ if (len != s)
+ return -EINVAL;
+
+ /*
+ * We still have exclusive access to the data since that's how we
+ * left it when returning from optee_supp_read().
+ */
+
+ /* See comment on mutex in optee_supp_read() above */
+ mutex_lock(&supp->supp_mutex);
+
+ if (!supp->supp_next_write) {
+ /*
+ * Something strange is going on, supplicant shouldn't
+ * enter optee_supp_write() in this state
+ */
+ ret = -ENOENT;
+ goto out;
+ }
+
+ if (copy_from_user(supp->data_from_supp, buf, s)) {
+ /*
+ * Something is wrong, let supplicant restart. Next call to
+ * optee_supp_read() will give an error to the requesting
+ * thread and release it.
+ */
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* Data has been populated, set the pointer to NULL */
+ supp->data_from_supp = NULL;
+
+ /* Allow optee_supp_read() above to do its work */
+ supp->supp_next_write = false;
+
+ /* Let the requesting thread continue */
+ up(&supp->data_from_supp_sem);
+out:
+ mutex_unlock(&supp->supp_mutex);
+ return ret;
+}
new file mode 100644
@@ -0,0 +1,368 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef OPTEE_MSG_H
+#define OPTEE_MSG_H
+
+#include <linux/types.h>
+
+/*
+ * This file is exported by OP-TEE and is kept in sync between secure
+ * world, normal world kernel driver, and user space client lib.
+ *
+ * This file is divided into three sections.
+ * 1. Formatting of messages.
+ * 2. Requests from normal world
+ * 3. Requests from secure world, Remote Procedure Call (RPC)
+ */
+
+/*****************************************************************************
+ * Part 1 - formatting of messages
+ *****************************************************************************/
+
+/*
+ * Same values as TEE_PARAM_* from TEE Internal API
+ */
+#define OPTEEM_ATTR_TYPE_NONE 0
+#define OPTEEM_ATTR_TYPE_VALUE_INPUT 1
+#define OPTEEM_ATTR_TYPE_VALUE_OUTPUT 2
+#define OPTEEM_ATTR_TYPE_VALUE_INOUT 3
+#define OPTEEM_ATTR_TYPE_MEMREF_INPUT 5
+#define OPTEEM_ATTR_TYPE_MEMREF_OUTPUT 6
+#define OPTEEM_ATTR_TYPE_MEMREF_INOUT 7
+
+#define OPTEEM_ATTR_TYPE_MASK 0x7
+
+/*
+ * Meta parameter to be absorbed by the Secure OS and not passed
+ * to the Trusted Application.
+ *
+ * Currently only used for struct opteem_meta_open_session which
+ * is added to OPTEEM_CMD_OPEN_SESSION.
+ */
+#define OPTEEM_ATTR_META 0x8
+
+
+/**
+ * struct opteem_param_memref - memory reference
+ * @buf_ptr: Address of the buffer
+ * @size: Size of the buffer
+ * @shm_ref: Shared memory reference only used by normal world
+ *
+ * Secure and normal world communicates pointers as physical address
+ * instead of the virtual address. This is because secure and normal world
+ * have completely independent memory mapping. Normal world can even have a
+ * hypervisor which need to translate the guest physical address (AKA IPA
+ * in ARM documentation) to a real physical address before passing the
+ * structure to secure world.
+ */
+struct opteem_param_memref {
+ __u64 buf_ptr;
+ __u64 size;
+ __u64 shm_ref;
+};
+
+/**
+ * struct opteem_param_value - values
+ * @a: first value
+ * @b: second value
+ * @c: third value
+ */
+struct opteem_param_value {
+ __u64 a;
+ __u64 b;
+ __u64 c;
+};
+
+/**
+ * struct opteem_param - parameter
+ * @attr: attributes
+ * @memref: a memory reference
+ * @value: a value
+ *
+ * @attr & OPTEEM_ATTR_TYPE_MASK indicates if memref or value is used in
+ * the union. OPTEEM_ATTR_TYPE_VALUE_* indicates value and
+ * OPTEEM_ATTR_TYPE_MEMREF_* indicates memref. OPTEEM_ATTR_TYPE_NONE
+ * indicates that none of the members are used.
+ */
+struct opteem_param {
+ __u64 attr;
+ union {
+ struct opteem_param_memref memref;
+ struct opteem_param_value value;
+ } u;
+};
+
+/**
+ * struct opteem_arg - call argument
+ * @cmd: Command, one of OPTEEM_CMD_* or OPTEEM_RPC_CMD_*
+ * @func: Trusted Application function, specific to the Trusted Application,
+ * used if cmd == OPTEEM_CMD_INVOKE_COMMAND
+ * @session: In parameter for all OPTEEM_CMD_* except
+ * OPTEEM_CMD_OPEN_SESSION where it's an output parameter instead
+ * @ret: return value
+ * @ret_origin: origin of the return value
+ * @num_params: number of parameters supplied to the OS Command
+ * @params: the parameters supplied to the OS Command
+ *
+ * All normal calls to Trusted OS uses this struct. If cmd requires further
+ * information than what these field holds it can be passed as a parameter
+ * tagged as meta (setting the OPTEEM_ATTR_META bit in corresponding
+ * param_attrs). All parameters tagged as meta has to come first.
+ */
+struct opteem_arg {
+ __u32 cmd;
+ __u32 func;
+ __u32 session;
+ __u32 ret;
+ __u32 ret_origin;
+ __u32 num_params __aligned(8);
+
+ /*
+ * num_params is 8 byte aligned since the 'struct opteem_param'
+ * which follows requires 8 byte alignment.
+ *
+ * Commented out element used to visualize the layout dynamic part
+ * of the struct. This field is not available at all if
+ * num_params == 0.
+ *
+ * params is accessed through the macro OPTEEM_GET_PARAMS
+ *
+ * struct opteem_param params[num_params];
+ */
+};
+
+/**
+ * OPTEEM_GET_PARAMS - return pointer to struct opteem_param *
+ *
+ * @x: Pointer to a struct opteem_arg
+ *
+ * Returns a pointer to the params[] inside a struct opteem_arg.
+ */
+#define OPTEEM_GET_PARAMS(x) \
+ (struct opteem_param *)(((struct opteem_arg *)(x)) + 1)
+
+/**
+ * OPTEEM_GET_ARG_SIZE - return size of struct opteem_arg
+ *
+ * @num_params: Number of parameters embedded in the struct opteem_arg
+ *
+ * Returns the size of the struct opteem_arg together with the number
+ * of embedded parameters.
+ */
+#define OPTEEM_GET_ARG_SIZE(num_params) \
+ (sizeof(struct opteem_arg) + \
+ sizeof(struct opteem_param) * (num_params))
+
+/* Length in bytes of a UUID */
+#define OPTEEM_UUID_LEN 16
+
+/**
+ * struct opteem_meta_open_session - additional parameters for
+ * OPTEEM_CMD_OPEN_SESSION
+ * @uuid: UUID of the Trusted Application
+ * @clnt_uuid: UUID of client
+ * @clnt_login: Login class of client, TEE_LOGIN_* if being Global Platform
+ * compliant
+ *
+ * This struct is passed in the first parameter as an input memref tagged
+ * as meta on an OPTEEM_CMD_OPEN_SESSION cmd.
+ */
+struct opteem_meta_open_session {
+ __u8 uuid[OPTEEM_UUID_LEN];
+ __u8 clnt_uuid[OPTEEM_UUID_LEN];
+ __u32 clnt_login;
+};
+
+/**
+ * struct optee_cmd_prefix - initial header for all user space buffers
+ * @func_id: Function Id OPTEEM_FUNCID_* below
+ * @pad: padding to make the struct size a multiple of 8 bytes
+ *
+ * This struct is 8 byte aligned since it's always followed by a struct
+ * opteem_arg which requires 8 byte alignment.
+ */
+struct opteem_cmd_prefix {
+ __u32 func_id;
+ __u32 pad __aligned(8);
+};
+
+/*****************************************************************************
+ * Part 2 - requests from normal world
+ *****************************************************************************/
+
+/*
+ * Return the following UID if using API specified in this file without
+ * further extentions:
+ * 384fb3e0-e7f8-11e3-af63-0002a5d5c51b.
+ * Represented in 4 32-bit words in OPTEEM_UID_0, OPTEEM_UID_1,
+ * OPTEEM_UID_2, OPTEEM_UID_3.
+ */
+#define OPTEEM_UID_0 0x384fb3e0
+#define OPTEEM_UID_1 0xe7f811e3
+#define OPTEEM_UID_2 0xaf630002
+#define OPTEEM_UID_3 0xa5d5c51b
+#define OPTEEM_FUNCID_CALLS_UID 0xFF01
+
+/*
+ * Returns 2.0 if using API specified in this file without further extentions.
+ * Represented in 2 32-bit words in OPTEEM_REVISION_MAJOR and
+ * OPTEEM_REVISION_MINOR
+ */
+#define OPTEEM_REVISION_MAJOR 2
+#define OPTEEM_REVISION_MINOR 0
+#define OPTEEM_FUNCID_CALLS_REVISION 0xFF03
+
+/*
+ * Get UUID of Trusted OS.
+ *
+ * Used by non-secure world to figure out which Trusted OS is installed.
+ * Note that returned UUID is the UUID of the Trusted OS, not of the API.
+ *
+ * Returns UUID in 4 32-bit words in the same way as OPTEEM_FUNCID_CALLS_UID
+ * described above.
+ */
+#define OPTEEM_OS_OPTEE_UUID_0 0x486178e0
+#define OPTEEM_OS_OPTEE_UUID_1 0xe7f811e3
+#define OPTEEM_OS_OPTEE_UUID_2 0xbc5e0002
+#define OPTEEM_OS_OPTEE_UUID_3 0xa5d5c51b
+#define OPTEEM_FUNCID_GET_OS_UUID 0x0000
+
+/*
+ * Get revision of Trusted OS.
+ *
+ * Used by non-secure world to figure out which version of the Trusted OS
+ * is installed. Note that the returned revision is the revision of the
+ * Trusted OS, not of the API.
+ *
+ * Returns revision in 2 32-bit words in the same way as OPTEEM_CALLS_REVISION
+ * described above.
+ */
+#define OPTEEM_OS_OPTEE_REVISION_MAJOR 1
+#define OPTEEM_OS_OPTEE_REVISION_MINOR 0
+#define OPTEEM_FUNCID_GET_OS_REVISION 0x0001
+
+/*
+ * Do a secure call with struct opteem_arg as argument
+ * The OPTEEM_CMD_* below defines what goes in struct opteem_arg::cmd
+ *
+ * For OPTEEM_CMD_OPEN_SESSION the first parameter is tagged as meta, holding
+ * a memref with a struct opteem_meta_open_session which is needed find the
+ * Trusted Application and to indicate the credentials of the client.
+ *
+ * For OPTEEM_CMD_INVOKE_COMMAND struct opteem_arg::func is Trusted
+ * Application function, specific to the Trusted Application.
+ */
+#define OPTEEM_CMD_OPEN_SESSION 0
+#define OPTEEM_CMD_INVOKE_COMMAND 1
+#define OPTEEM_CMD_CLOSE_SESSION 2
+#define OPTEEM_CMD_CANCEL 3
+#define OPTEEM_FUNCID_CALL_WITH_ARG 0x0004
+
+/*
+ * Do a write response from tee-supplicant with struct opteem_arg as argument
+ */
+#define OPTEEM_FUNCID_SUPP_CMD_WRITE 0x1000
+
+/*
+ * Do a read request from tee-supplicant with struct opteem_arg as argument
+ */
+#define OPTEEM_FUNCID_SUPP_CMD_READ 0x1001
+
+/*****************************************************************************
+ * Part 3 - Requests from secure world, RPC
+ *****************************************************************************/
+
+/*
+ * All RPC is done with a struct opteem_arg as bearer of information,
+ * struct opteem_arg::arg holds values defined by OPTEEM_RPC_CMD_* below
+ */
+
+/*
+ * Number of parameters used in RPC communication, always this number but
+ * for some commands a parameter may be set to unused.
+ */
+#define OPTEEM_RPC_NUM_PARAMS 2
+
+/*
+ * Load a TA into memory
+ * [in] param[0] memref holding a uuid (OPTEEM_UUID_LEN bytes) of the
+ * TA to load
+ * [out] param[1] memref allocated to hold the TA content. memref.buf
+ * may be == NULL to query the size of the TA content.
+ * memref.size is always updated with the actual size
+ * of the TA content. If returned memref.size is larger
+ * than the supplied memref.size, not content is loaded.
+ * [out] arg.ret return value of request, 0 on success.
+ */
+#define OPTEEM_RPC_CMD_LOAD_TA 0
+
+/*
+ * Reserved
+ */
+#define OPTEEM_RPC_CMD_RPMB 1
+
+/*
+ * File system access, defined in tee-supplicant
+ */
+#define OPTEEM_RPC_CMD_FS 2
+
+/*
+ * Get time, defined in tee-supplicant
+ */
+#define OPTEEM_RPC_CMD_GET_TIME 3
+
+/*
+ * Sleep mutex, helper for secure world to implement a sleeping mutex.
+ * struct opteem_arg::func one of OPTEEM_RPC_SLEEP_MUTEX_* below
+ *
+ * OPTEEM_RPC_SLEEP_MUTEX_WAIT
+ * [in] param[0].value .a sleep mutex key
+ * .b wait tick
+ * [not used] param[1]
+ *
+ * OPTEEM_RPC_SLEEP_MUTEX_WAKEUP
+ * [in] param[0].value .a sleep mutex key
+ * .b wait after
+ * [not used] param[1]
+ *
+ * OPTEEM_RPC_SLEEP_MUTEX_DELETE
+ * [in] param[0].value .a sleep mutex key
+ * [not used] param[1]
+ */
+#define OPTEEM_RPC_SLEEP_MUTEX_WAIT 0
+#define OPTEEM_RPC_SLEEP_MUTEX_WAKEUP 1
+#define OPTEEM_RPC_SLEEP_MUTEX_DELETE 2
+#define OPTEEM_RPC_CMD_SLEEP_MUTEX 4
+
+/*
+ * Suspend execution
+ *
+ * [in] param[0].value .a number of milliseconds to suspend
+ */
+#define OPTEEM_RPC_CMD_SUSPEND 5
+
+#endif /* OPTEE_MSG_H */
Adds a OP-TEE driver which also can be compiled as a loadable module. * Targets ARM and ARM64 * Supports using reserved memory from OP-TEE as shared memory * CMA as shared memory is optional and only tried if OP-TEE doesn't supply a reserved shared memory region * Probes OP-TEE version using SMCs * Accepts requests on privileged and unprivileged device * Uses OPTEE message protocol version 2 Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> --- Documentation/devicetree/bindings/optee/optee.txt | 17 + .../devicetree/bindings/vendor-prefixes.txt | 1 + MAINTAINERS | 6 + drivers/tee/Kconfig | 10 + drivers/tee/Makefile | 1 + drivers/tee/optee/Kconfig | 19 + drivers/tee/optee/Makefile | 13 + drivers/tee/optee/call.c | 294 ++++++++++++ drivers/tee/optee/core.c | 509 ++++++++++++++++++++ drivers/tee/optee/optee_private.h | 138 ++++++ drivers/tee/optee/optee_smc.h | 510 +++++++++++++++++++++ drivers/tee/optee/rpc.c | 282 ++++++++++++ drivers/tee/optee/smc_a32.S | 30 ++ drivers/tee/optee/smc_a64.S | 37 ++ drivers/tee/optee/supp.c | 327 +++++++++++++ include/uapi/linux/optee_msg.h | 368 +++++++++++++++ 16 files changed, 2562 insertions(+) create mode 100644 Documentation/devicetree/bindings/optee/optee.txt create mode 100644 drivers/tee/optee/Kconfig create mode 100644 drivers/tee/optee/Makefile create mode 100644 drivers/tee/optee/call.c create mode 100644 drivers/tee/optee/core.c create mode 100644 drivers/tee/optee/optee_private.h create mode 100644 drivers/tee/optee/optee_smc.h create mode 100644 drivers/tee/optee/rpc.c create mode 100644 drivers/tee/optee/smc_a32.S create mode 100644 drivers/tee/optee/smc_a64.S create mode 100644 drivers/tee/optee/supp.c create mode 100644 include/uapi/linux/optee_msg.h