diff mbox

[09/12,media] tsin: c8sectpfe: Add support for various ST NIM cards.

Message ID 1435158670-7195-10-git-send-email-peter.griffin@linaro.org
State New
Headers show

Commit Message

Peter Griffin June 24, 2015, 3:11 p.m. UTC 
This patch adds support for the following 3 NIM cards: -
1) STV0367-NIM (stv0367 demod with Thompson PLL)
2) B2100A (2x stv0367 demods & 2x NXP tda18212 tuners)
3) STV0903-6110NIM (stv0903 demod + 6110 tuner, lnb24)

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
---
 drivers/media/tsin/c8sectpfe/c8sectpfe-dvb.c | 296 +++++++++++++++++++++++++++
 drivers/media/tsin/c8sectpfe/c8sectpfe-dvb.h |  20 ++
 2 files changed, 316 insertions(+)
 create mode 100644 drivers/media/tsin/c8sectpfe/c8sectpfe-dvb.c
 create mode 100644 drivers/media/tsin/c8sectpfe/c8sectpfe-dvb.h

Comments

Peter Griffin July 30, 2015, 9:43 a.m. UTC | #1 
Hi Mauro,

On Wed, 22 Jul 2015, Mauro Carvalho Chehab wrote:

> Em Wed, 24 Jun 2015 16:11:07 +0100
> Peter Griffin <peter.griffin@linaro.org> escreveu:
> 
> > This patch adds support for the following 3 NIM cards: -
> > 1) STV0367-NIM (stv0367 demod with Thompson PLL)
> > 2) B2100A (2x stv0367 demods & 2x NXP tda18212 tuners)
> > 3) STV0903-6110NIM (stv0903 demod + 6110 tuner, lnb24)
> > 
> > Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
> > ---
> >  drivers/media/tsin/c8sectpfe/c8sectpfe-dvb.c | 296 +++++++++++++++++++++++++++
> >  drivers/media/tsin/c8sectpfe/c8sectpfe-dvb.h |  20 ++
> >  2 files changed, 316 insertions(+)
> >  create mode 100644 drivers/media/tsin/c8sectpfe/c8sectpfe-dvb.c
> >  create mode 100644 drivers/media/tsin/c8sectpfe/c8sectpfe-dvb.h
> > 
> > diff --git a/drivers/media/tsin/c8sectpfe/c8sectpfe-dvb.c b/drivers/media/tsin/c8sectpfe/c8sectpfe-dvb.c
> > new file mode 100644
> > index 0000000..5c4ecb4
> > --- /dev/null
> > +++ b/drivers/media/tsin/c8sectpfe/c8sectpfe-dvb.c
> > @@ -0,0 +1,296 @@
> > +/*
> > + *  c8sectpfe-dvb.c - C8SECTPFE STi DVB driver
> > + *
> > + * Copyright (c) STMicroelectronics 2015
> > + *
> > + *  Author Peter Griffin <peter.griffin@linaro.org>
> > + *
> > + *  This program is free software; you can redistribute it and/or modify
> > + *  it under the terms of the GNU General Public License as published by
> > + *  the Free Software Foundation; either version 2 of the License, or
> > + *  (at your option) any later version.
> > + *
> > + *  This program is distributed in the hope that it will be useful,
> > + *  but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + *
> > + *  GNU General Public License for more details.
> > + */
> > +#include <linux/completion.h>
> > +#include <linux/delay.h>
> > +#include <linux/i2c.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/version.h>
> > +
> > +#include <dt-bindings/media/c8sectpfe.h>
> > +
> > +#include "c8sectpfe-common.h"
> > +#include "c8sectpfe-core.h"
> > +#include "c8sectpfe-dvb.h"
> > +
> > +#include "dvb-pll.h"
> > +#include "lnbh24.h"
> > +#include "stv0367.h"
> > +#include "stv0367_priv.h"
> > +#include "stv6110x.h"
> > +#include "stv090x.h"
> > +#include "tda18212.h"
> > +
> > +static inline const char *dvb_card_str(unsigned int c)
> > +{
> > +	switch (c) {
> > +	case STV0367_PLL_BOARD_NIMA:	return "STV0367_PLL_BOARD_NIMA";
> > +	case STV0367_PLL_BOARD_NIMB:	return "STV0367_PLL_BOARD_NIMB";
> > +	case STV0367_TDA18212_NIMA_1:	return "STV0367_TDA18212_NIMA_1";
> > +	case STV0367_TDA18212_NIMA_2:	return "STV0367_TDA18212_NIMA_2";
> > +	case STV0367_TDA18212_NIMB_1:	return "STV0367_TDA18212_NIMB_1";
> > +	case STV0367_TDA18212_NIMB_2:	return "STV0367_TDA18212_NIMB_2";
> > +	case STV0903_6110_LNB24_NIMA:	return "STV0903_6110_LNB24_NIMA";
> > +	case STV0903_6110_LNB24_NIMB:	return "STV0903_6110_LNB24_NIMB";
> > +	default:			return "unknown dvb frontend card";
> > +	}
> > +}
> > +
> > +static struct stv090x_config stv090x_config = {
> > +	.device                 = STV0903,
> > +	.demod_mode             = STV090x_SINGLE,
> > +	.clk_mode               = STV090x_CLK_EXT,
> > +	.xtal                   = 16000000,
> > +	.address                = 0x69,
> > +
> > +	.ts1_mode               = STV090x_TSMODE_SERIAL_CONTINUOUS,
> > +	.ts2_mode               = STV090x_TSMODE_SERIAL_CONTINUOUS,
> > +
> > +	.repeater_level         = STV090x_RPTLEVEL_64,
> > +
> > +	.tuner_init             = NULL,
> > +	.tuner_set_mode         = NULL,
> > +	.tuner_set_frequency    = NULL,
> > +	.tuner_get_frequency    = NULL,
> > +	.tuner_set_bandwidth    = NULL,
> > +	.tuner_get_bandwidth    = NULL,
> > +	.tuner_set_bbgain       = NULL,
> > +	.tuner_get_bbgain       = NULL,
> > +	.tuner_set_refclk       = NULL,
> > +	.tuner_get_status       = NULL,
> > +};
> > +
> > +static struct stv6110x_config stv6110x_config = {
> > +	.addr                   = 0x60,
> > +	.refclk                 = 16000000,
> > +};
> > +
> > +#define NIMA 0
> > +#define NIMB 1
> > +
> > +static struct stv0367_config stv0367_pll_config[] = {
> > +	{
> > +		.demod_address = 0x1c,
> > +		.xtal = 27000000,
> > +		.if_khz = 36166,
> > +		.if_iq_mode = FE_TER_NORMAL_IF_TUNER,
> > +		.ts_mode = STV0367_SERIAL_PUNCT_CLOCK,
> > +		.clk_pol = STV0367_CLOCKPOLARITY_DEFAULT,
> > +	}, {
> > +		.demod_address = 0x1d,
> > +		.xtal = 27000000,
> > +		.if_khz = 36166,
> > +		.if_iq_mode = FE_TER_NORMAL_IF_TUNER,
> > +		.ts_mode = STV0367_SERIAL_PUNCT_CLOCK,
> > +		.clk_pol = STV0367_CLOCKPOLARITY_DEFAULT,
> > +	},
> > +};
> > +
> > +static struct stv0367_config stv0367_tda18212_config[] = {
> > +	{
> > +		.demod_address = 0x1c,
> > +		.xtal = 16000000,
> > +		.if_khz = 4500,
> > +		.if_iq_mode = FE_TER_NORMAL_IF_TUNER,
> > +		.ts_mode = STV0367_SERIAL_PUNCT_CLOCK,
> > +		.clk_pol = STV0367_CLOCKPOLARITY_DEFAULT,
> > +	}, {
> > +		.demod_address = 0x1d,
> > +		.xtal = 16000000,
> > +		.if_khz = 4500,
> > +		.if_iq_mode = FE_TER_NORMAL_IF_TUNER,
> > +		.ts_mode = STV0367_SERIAL_PUNCT_CLOCK,
> > +		.clk_pol = STV0367_CLOCKPOLARITY_DEFAULT,
> > +	}, {
> > +		.demod_address = 0x1e,
> > +		.xtal = 16000000,
> > +		.if_khz = 4500,
> > +		.if_iq_mode = FE_TER_NORMAL_IF_TUNER,
> > +		.ts_mode = STV0367_SERIAL_PUNCT_CLOCK,
> > +		.clk_pol = STV0367_CLOCKPOLARITY_DEFAULT,
> > +	},
> > +};
> > +
> > +static struct tda18212_config tda18212_conf = {
> > +	.if_dvbt_6 = 4150,
> > +	.if_dvbt_7 = 4150,
> > +	.if_dvbt_8 = 4500,
> > +	.if_dvbc = 5000,
> > +};
> > +
> > +int c8sectpfe_frontend_attach(struct dvb_frontend **fe,
> > +		struct c8sectpfe *c8sectpfe,
> > +		struct channel_info *tsin, int chan_num)
> > +{
> > +	struct tda18212_config *tda18212;
> > +	struct stv6110x_devctl *fe2;
> > +	struct i2c_client *client;
> > +	struct i2c_board_info tda18212_info = {
> > +		.type = "tda18212",
> > +		.addr = 0x60,
> > +	};
> > +
> > +	BUG_ON(!tsin);
> 
> Just return an error if !tsin.

Ok will fix in V2

regards,

Peter.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/media/tsin/c8sectpfe/c8sectpfe-dvb.c b/drivers/media/tsin/c8sectpfe/c8sectpfe-dvb.c
new file mode 100644
index 0000000..5c4ecb4
--- /dev/null
+++ b/drivers/media/tsin/c8sectpfe/c8sectpfe-dvb.c
@@ -0,0 +1,296 @@ 
+/*
+ *  c8sectpfe-dvb.c - C8SECTPFE STi DVB driver
+ *
+ * Copyright (c) STMicroelectronics 2015
+ *
+ *  Author Peter Griffin <peter.griffin@linaro.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ */
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/version.h>
+
+#include <dt-bindings/media/c8sectpfe.h>
+
+#include "c8sectpfe-common.h"
+#include "c8sectpfe-core.h"
+#include "c8sectpfe-dvb.h"
+
+#include "dvb-pll.h"
+#include "lnbh24.h"
+#include "stv0367.h"
+#include "stv0367_priv.h"
+#include "stv6110x.h"
+#include "stv090x.h"
+#include "tda18212.h"
+
+static inline const char *dvb_card_str(unsigned int c)
+{
+	switch (c) {
+	case STV0367_PLL_BOARD_NIMA:	return "STV0367_PLL_BOARD_NIMA";
+	case STV0367_PLL_BOARD_NIMB:	return "STV0367_PLL_BOARD_NIMB";
+	case STV0367_TDA18212_NIMA_1:	return "STV0367_TDA18212_NIMA_1";
+	case STV0367_TDA18212_NIMA_2:	return "STV0367_TDA18212_NIMA_2";
+	case STV0367_TDA18212_NIMB_1:	return "STV0367_TDA18212_NIMB_1";
+	case STV0367_TDA18212_NIMB_2:	return "STV0367_TDA18212_NIMB_2";
+	case STV0903_6110_LNB24_NIMA:	return "STV0903_6110_LNB24_NIMA";
+	case STV0903_6110_LNB24_NIMB:	return "STV0903_6110_LNB24_NIMB";
+	default:			return "unknown dvb frontend card";
+	}
+}
+
+static struct stv090x_config stv090x_config = {
+	.device                 = STV0903,
+	.demod_mode             = STV090x_SINGLE,
+	.clk_mode               = STV090x_CLK_EXT,
+	.xtal                   = 16000000,
+	.address                = 0x69,
+
+	.ts1_mode               = STV090x_TSMODE_SERIAL_CONTINUOUS,
+	.ts2_mode               = STV090x_TSMODE_SERIAL_CONTINUOUS,
+
+	.repeater_level         = STV090x_RPTLEVEL_64,
+
+	.tuner_init             = NULL,
+	.tuner_set_mode         = NULL,
+	.tuner_set_frequency    = NULL,
+	.tuner_get_frequency    = NULL,
+	.tuner_set_bandwidth    = NULL,
+	.tuner_get_bandwidth    = NULL,
+	.tuner_set_bbgain       = NULL,
+	.tuner_get_bbgain       = NULL,
+	.tuner_set_refclk       = NULL,
+	.tuner_get_status       = NULL,
+};
+
+static struct stv6110x_config stv6110x_config = {
+	.addr                   = 0x60,
+	.refclk                 = 16000000,
+};
+
+#define NIMA 0
+#define NIMB 1
+
+static struct stv0367_config stv0367_pll_config[] = {
+	{
+		.demod_address = 0x1c,
+		.xtal = 27000000,
+		.if_khz = 36166,
+		.if_iq_mode = FE_TER_NORMAL_IF_TUNER,
+		.ts_mode = STV0367_SERIAL_PUNCT_CLOCK,
+		.clk_pol = STV0367_CLOCKPOLARITY_DEFAULT,
+	}, {
+		.demod_address = 0x1d,
+		.xtal = 27000000,
+		.if_khz = 36166,
+		.if_iq_mode = FE_TER_NORMAL_IF_TUNER,
+		.ts_mode = STV0367_SERIAL_PUNCT_CLOCK,
+		.clk_pol = STV0367_CLOCKPOLARITY_DEFAULT,
+	},
+};
+
+static struct stv0367_config stv0367_tda18212_config[] = {
+	{
+		.demod_address = 0x1c,
+		.xtal = 16000000,
+		.if_khz = 4500,
+		.if_iq_mode = FE_TER_NORMAL_IF_TUNER,
+		.ts_mode = STV0367_SERIAL_PUNCT_CLOCK,
+		.clk_pol = STV0367_CLOCKPOLARITY_DEFAULT,
+	}, {
+		.demod_address = 0x1d,
+		.xtal = 16000000,
+		.if_khz = 4500,
+		.if_iq_mode = FE_TER_NORMAL_IF_TUNER,
+		.ts_mode = STV0367_SERIAL_PUNCT_CLOCK,
+		.clk_pol = STV0367_CLOCKPOLARITY_DEFAULT,
+	}, {
+		.demod_address = 0x1e,
+		.xtal = 16000000,
+		.if_khz = 4500,
+		.if_iq_mode = FE_TER_NORMAL_IF_TUNER,
+		.ts_mode = STV0367_SERIAL_PUNCT_CLOCK,
+		.clk_pol = STV0367_CLOCKPOLARITY_DEFAULT,
+	},
+};
+
+static struct tda18212_config tda18212_conf = {
+	.if_dvbt_6 = 4150,
+	.if_dvbt_7 = 4150,
+	.if_dvbt_8 = 4500,
+	.if_dvbc = 5000,
+};
+
+int c8sectpfe_frontend_attach(struct dvb_frontend **fe,
+		struct c8sectpfe *c8sectpfe,
+		struct channel_info *tsin, int chan_num)
+{
+	struct tda18212_config *tda18212;
+	struct stv6110x_devctl *fe2;
+	struct i2c_client *client;
+	struct i2c_board_info tda18212_info = {
+		.type = "tda18212",
+		.addr = 0x60,
+	};
+
+	BUG_ON(!tsin);
+
+	switch (tsin->dvb_card) {
+
+	case STV0367_PLL_BOARD_NIMA:
+	case STV0367_PLL_BOARD_NIMB:
+		if (tsin->dvb_card == STV0367_PLL_BOARD_NIMA)
+			*fe = dvb_attach(stv0367ter_attach,
+				 &stv0367_pll_config[NIMA], tsin->i2c_adapter);
+		else
+			*fe = dvb_attach(stv0367ter_attach,
+				 &stv0367_pll_config[NIMB], tsin->i2c_adapter);
+
+		if (!*fe) {
+			dev_err(c8sectpfe->device,
+				"%s: stv0367ter_attach failed for NIM card %s\n"
+				, __func__, dvb_card_str(tsin->dvb_card));
+			return -ENODEV;
+		};
+
+		/*
+		 * init the demod so that i2c gate_ctrl
+		 * to the tuner works correctly
+		 */
+		(*fe)->ops.init(*fe);
+
+		if (!dvb_attach(dvb_pll_attach, *fe, 0x60,
+			tsin->i2c_adapter, DVB_PLL_THOMSON_DTT7546X)) {
+
+			dev_err(c8sectpfe->device,
+				"%s: DVB_PLL_THOMSON_DTT7546X attach failed\n\t"
+				"for NIM card %s\n",
+				__func__, dvb_card_str(tsin->dvb_card));
+			return -ENODEV;
+		}
+		break;
+
+	case STV0367_TDA18212_NIMA_1:
+	case STV0367_TDA18212_NIMA_2:
+	case STV0367_TDA18212_NIMB_1:
+	case STV0367_TDA18212_NIMB_2:
+		if (tsin->dvb_card == STV0367_TDA18212_NIMA_1)
+			*fe = dvb_attach(stv0367ter_attach,
+				 &stv0367_tda18212_config[0],
+					tsin->i2c_adapter);
+		else if (tsin->dvb_card == STV0367_TDA18212_NIMB_1)
+			*fe = dvb_attach(stv0367ter_attach,
+				 &stv0367_tda18212_config[1],
+					tsin->i2c_adapter);
+		else
+			*fe = dvb_attach(stv0367ter_attach,
+				 &stv0367_tda18212_config[2],
+					tsin->i2c_adapter);
+
+		if (!*fe) {
+			dev_err(c8sectpfe->device,
+				"%s: stv0367ter_attach failed for NIM card %s\n"
+				, __func__, dvb_card_str(tsin->dvb_card));
+			return -ENODEV;
+		};
+
+		/*
+		 * init the demod so that i2c gate_ctrl
+		 * to the tuner works correctly
+		 */
+		(*fe)->ops.init(*fe);
+
+		/* Allocate the tda18212 structure */
+		tda18212 = devm_kzalloc(c8sectpfe->device,
+					sizeof(struct tda18212_config),
+					GFP_KERNEL);
+		if (!tda18212) {
+			dev_err(c8sectpfe->device,
+				"%s: devm_kzalloc failed\n", __func__);
+			return -ENOMEM;
+		}
+
+		memcpy(tda18212, &tda18212_conf,
+			sizeof(struct tda18212_config));
+
+		tda18212->fe = (*fe);
+
+		tda18212_info.platform_data = tda18212;
+
+		/* attach tuner */
+		request_module("tda18212");
+		client = i2c_new_device(tsin->i2c_adapter, &tda18212_info);
+		if (!client || !client->dev.driver) {
+			dvb_frontend_detach(*fe);
+			return -ENODEV;
+		}
+
+		if (!try_module_get(client->dev.driver->owner)) {
+			i2c_unregister_device(client);
+			dvb_frontend_detach(*fe);
+			return -ENODEV;
+		}
+
+		tsin->i2c_client = client;
+
+		break;
+
+	case STV0903_6110_LNB24_NIMA:
+		*fe = dvb_attach(stv090x_attach,	&stv090x_config,
+				tsin->i2c_adapter, STV090x_DEMODULATOR_0);
+		if (!*fe) {
+			dev_err(c8sectpfe->device, "%s: stv090x_attach failed\n"
+				"\tfor NIM card %s\n",
+				__func__, dvb_card_str(tsin->dvb_card));
+			return -ENODEV;
+		}
+
+		fe2 = dvb_attach(stv6110x_attach, *fe,
+					&stv6110x_config, tsin->i2c_adapter);
+		if (!fe2) {
+			dev_err(c8sectpfe->device,
+				"%s: stv6110x_attach failed for NIM card %s\n"
+				, __func__, dvb_card_str(tsin->dvb_card));
+			return -ENODEV;
+		};
+
+		stv090x_config.tuner_init = fe2->tuner_init;
+		stv090x_config.tuner_set_mode = fe2->tuner_set_mode;
+		stv090x_config.tuner_set_frequency = fe2->tuner_set_frequency;
+		stv090x_config.tuner_get_frequency = fe2->tuner_get_frequency;
+		stv090x_config.tuner_set_bandwidth = fe2->tuner_set_bandwidth;
+		stv090x_config.tuner_get_bandwidth = fe2->tuner_get_bandwidth;
+		stv090x_config.tuner_set_bbgain = fe2->tuner_set_bbgain;
+		stv090x_config.tuner_get_bbgain = fe2->tuner_get_bbgain;
+		stv090x_config.tuner_set_refclk = fe2->tuner_set_refclk;
+		stv090x_config.tuner_get_status = fe2->tuner_get_status;
+
+		dvb_attach(lnbh24_attach, *fe, tsin->i2c_adapter, 0, 0, 0x9);
+		break;
+
+	default:
+		dev_err(c8sectpfe->device,
+			"%s: DVB frontend card %s not yet supported\n",
+			__func__, dvb_card_str(tsin->dvb_card));
+		return -ENODEV;
+	}
+
+	(*fe)->id = chan_num;
+
+	dev_info(c8sectpfe->device,
+			"DVB frontend card %s successfully attached",
+			dvb_card_str(tsin->dvb_card));
+	return 0;
+}
diff --git a/drivers/media/tsin/c8sectpfe/c8sectpfe-dvb.h b/drivers/media/tsin/c8sectpfe/c8sectpfe-dvb.h
new file mode 100644
index 0000000..bd366db
--- /dev/null
+++ b/drivers/media/tsin/c8sectpfe/c8sectpfe-dvb.h
@@ -0,0 +1,20 @@ 
+/*
+ * c8sectpfe-common.h - C8SECTPFE STi DVB driver
+ *
+ * Copyright (c) STMicroelectronics 2015
+ *
+ *   Author: Peter Griffin <peter.griffin@linaro.org>
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License as
+ *      published by the Free Software Foundation; either version 2 of
+ *      the License, or (at your option) any later version.
+ */
+#ifndef _C8SECTPFE_DVB_H_
+#define _C8SECTPFE_DVB_H_
+
+int c8sectpfe_frontend_attach(struct dvb_frontend **fe,
+			struct c8sectpfe *c8sectpfe, struct channel_info *tsin,
+			int chan_num);
+
+#endif