| Message ID | 1450872611-15326-1-git-send-email-sudeep.holla@arm.com |
|---|---|
| State | New |
| Headers | show |
On Wed, Dec 23, 2015 at 12:10:11PM +0000, Sudeep Holla wrote: > Juno r2 is identical to Juno r1 with Cortex A57 cores replaced by > Cortex A72 cores. That's a bigger change than I'd expect... > Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> > Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> > --- > Documentation/devicetree/bindings/arm/arm-boards | 1 + > Documentation/devicetree/bindings/arm/cpus.txt | 1 + This should probably be a separate patch, but I already have a patch in my tree for 4.5 adding arm,cortex-a72. So just drop this hunk. > arch/arm64/boot/dts/arm/Makefile | 2 +- > arch/arm64/boot/dts/arm/juno-r2.dts | 200 +++++++++++++++++++++++ > 4 files changed, 203 insertions(+), 1 deletion(-) > create mode 100644 arch/arm64/boot/dts/arm/juno-r2.dts [...] > + pmu_a72 { > + compatible = "arm,cortex-a72-pmu"; This needs to be documented. > + pcie-controller@40000000 { > + compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", "pci-host-ecam-generic"; Is this common with r1? Rob -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Rob, Thanks for the review. On 29/12/15 18:35, Rob Herring wrote: > On Wed, Dec 23, 2015 at 12:10:11PM +0000, Sudeep Holla wrote: >> Juno r2 is identical to Juno r1 with Cortex A57 cores replaced by >> Cortex A72 cores. > > That's a bigger change than I'd expect... > I am not sure if I understood what you meant by that. Do you want me to elaborate with more details ? >> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> >> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> >> --- >> Documentation/devicetree/bindings/arm/arm-boards | 1 + >> Documentation/devicetree/bindings/arm/cpus.txt | 1 + > > This should probably be a separate patch, but I already have a patch in > my tree for 4.5 adding arm,cortex-a72. So just drop this hunk. > OK, will post DT binding separately. >> arch/arm64/boot/dts/arm/Makefile | 2 +- >> arch/arm64/boot/dts/arm/juno-r2.dts | 200 +++++++++++++++++++++++ >> 4 files changed, 203 insertions(+), 1 deletion(-) >> create mode 100644 arch/arm64/boot/dts/arm/juno-r2.dts > > [...] > >> + pmu_a72 { >> + compatible = "arm,cortex-a72-pmu"; > > This needs to be documented. > Yes, Will is already carrying a patch in his tree to add this [1] >> + pcie-controller@40000000 { >> + compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", "pci-host-ecam-generic"; > > Is this common with r1? > AFAIK it is. Liviu can you confirm ? Regards, Sudeep [1] https://git.kernel.org/cgit/linux/kernel/git/arm64/linux.git/commit/?h=for-next/perf&id=5d7ee87708d4d86fcc32afc9552d05f7625d303d -- -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Dec 30, 2015 at 5:22 AM, Sudeep Holla <sudeep.holla@arm.com> wrote: > Hi Rob, > > Thanks for the review. > > On 29/12/15 18:35, Rob Herring wrote: >> >> On Wed, Dec 23, 2015 at 12:10:11PM +0000, Sudeep Holla wrote: >>> >>> Juno r2 is identical to Juno r1 with Cortex A57 cores replaced by >>> Cortex A72 cores. >> >> >> That's a bigger change than I'd expect... >> > > I am not sure if I understood what you meant by that. Do you want me to > elaborate with more details ? No, just my commentary that I'd expect r1 -> r2 to be a board or Si spin rather than a whole new core. >>> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> >>> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> >>> --- >>> Documentation/devicetree/bindings/arm/arm-boards | 1 + >>> Documentation/devicetree/bindings/arm/cpus.txt | 1 + >> >> >> This should probably be a separate patch, but I already have a patch in >> my tree for 4.5 adding arm,cortex-a72. So just drop this hunk. >> > > OK, will post DT binding separately. No need, it is already in my tree. >>> + pcie-controller@40000000 { >>> + compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", >>> "pci-host-ecam-generic"; >> >> >> Is this common with r1? >> > > AFAIK it is. Liviu can you confirm ? Then perhaps you should move this to a common spot. Rob -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 30/12/15 15:09, Rob Herring wrote: > On Wed, Dec 30, 2015 at 5:22 AM, Sudeep Holla <sudeep.holla@arm.com> wrote: >> Hi Rob, >> >> Thanks for the review. >> >> On 29/12/15 18:35, Rob Herring wrote: >>> >>> On Wed, Dec 23, 2015 at 12:10:11PM +0000, Sudeep Holla wrote: >>>> >>>> Juno r2 is identical to Juno r1 with Cortex A57 cores replaced by >>>> Cortex A72 cores. >>> >>> >>> That's a bigger change than I'd expect... >>> >> >> I am not sure if I understood what you meant by that. Do you want me to >> elaborate with more details ? > > No, just my commentary that I'd expect r1 -> r2 to be a board or Si > spin rather than a whole new core. > Ah OK, yes it's new Si and has other minor updates like latest revisions of Cortex-A53 and other IPs. I just mentioned only the DT visible changes in the commit log. >>>> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> >>>> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> >>>> --- >>>> Documentation/devicetree/bindings/arm/arm-boards | 1 + >>>> Documentation/devicetree/bindings/arm/cpus.txt | 1 + >>> >>> >>> This should probably be a separate patch, but I already have a patch in >>> my tree for 4.5 adding arm,cortex-a72. So just drop this hunk. >>> >> >> OK, will post DT binding separately. > > No need, it is already in my tree. > Sorry for not being clear earlier. I was referring the "arm,juno-r2" compatible addition. I assume you have no objection if it's part of the same patch. >>>> + pcie-controller@40000000 { >>>> + compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", >>>> "pci-host-ecam-generic"; >>> >>> >>> Is this common with r1? >>> >> >> AFAIK it is. Liviu can you confirm ? > > Then perhaps you should move this to a common spot. > True, will wait for Liviu's response. -- Regards, Sudeep -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Dec 30, 2015 at 03:34:09PM +0000, Sudeep Holla wrote: > > > On 30/12/15 15:09, Rob Herring wrote: > >On Wed, Dec 30, 2015 at 5:22 AM, Sudeep Holla <sudeep.holla@arm.com> wrote: > >>Hi Rob, > >> > >>Thanks for the review. > >> > >>On 29/12/15 18:35, Rob Herring wrote: > >>> > >>>On Wed, Dec 23, 2015 at 12:10:11PM +0000, Sudeep Holla wrote: > >>>> > >>>>Juno r2 is identical to Juno r1 with Cortex A57 cores replaced by > >>>>Cortex A72 cores. > >>> > >>> > >>>That's a bigger change than I'd expect... > >>> > >> > >>I am not sure if I understood what you meant by that. Do you want me to > >>elaborate with more details ? > > > >No, just my commentary that I'd expect r1 -> r2 to be a board or Si > >spin rather than a whole new core. > > > > Ah OK, yes it's new Si and has other minor updates like latest revisions > of Cortex-A53 and other IPs. I just mentioned only the DT visible > changes in the commit log. > > >>>>Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> > >>>>Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> > >>>>--- > >>>> Documentation/devicetree/bindings/arm/arm-boards | 1 + > >>>> Documentation/devicetree/bindings/arm/cpus.txt | 1 + > >>> > >>> > >>>This should probably be a separate patch, but I already have a patch in > >>>my tree for 4.5 adding arm,cortex-a72. So just drop this hunk. > >>> > >> > >>OK, will post DT binding separately. > > > >No need, it is already in my tree. > > > > Sorry for not being clear earlier. I was referring the "arm,juno-r2" > compatible addition. I assume you have no objection if it's part of the > same patch. > > >>>>+ pcie-controller@40000000 { > >>>>+ compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", > >>>>"pci-host-ecam-generic"; > >>> > >>> > >>>Is this common with r1? > >>> > >> > >>AFAIK it is. Liviu can you confirm ? > > > >Then perhaps you should move this to a common spot. > > > > True, will wait for Liviu's response. AFAIK Juno r2 should have identical PCIe controller to r1. I have not been able to test it myself but at the same time I have no information on any changes applied to the IP. Sudeep, probably worth moving the pcie-controller@40000000 node in juno-base.dtsi and disable it by default, then re-enable in juno-r1.dts and juno-r2.dts. Best regards, Liviu > > -- > Regards, > Sudeep > -- ==================== | I would like to | | fix the world, | | but they're not | | giving me the | \ source code! / --------------- ¯\_(ツ)_/¯ -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 11/01/16 11:09, Liviu Dudau wrote: > On Wed, Dec 30, 2015 at 03:34:09PM +0000, Sudeep Holla wrote: [...] >>>> >>>> AFAIK it is. Liviu can you confirm ? >>> >>> Then perhaps you should move this to a common spot. >>> >> >> True, will wait for Liviu's response. > > AFAIK Juno r2 should have identical PCIe controller to r1. I have not been able to > test it myself but at the same time I have no information on any changes applied to > the IP. > > Sudeep, probably worth moving the pcie-controller@40000000 node in juno-base.dtsi > and disable it by default, then re-enable in juno-r1.dts and juno-r2.dts. > Yes, that's exactly what I though as it's present even on R0 but disabled due to H/W bug. I will do that and repost after merge window. -- Regards, Sudeep -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards index 1a709970e7f7..70601a58c433 100644 --- a/Documentation/devicetree/bindings/arm/arm-boards +++ b/Documentation/devicetree/bindings/arm/arm-boards @@ -180,6 +180,7 @@ described under the RS1 memory mapping. Required properties (in root node): compatible = "arm,juno"; /* For Juno r0 board */ compatible = "arm,juno-r1"; /* For Juno r1 board */ + compatible = "arm,juno-r2"; /* For Juno r2 board */ Required nodes: The description for the board must include: diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index 3a07a87fef20..58e240d75169 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt @@ -157,6 +157,7 @@ nodes to be present and contain the properties described below. "arm,cortex-a17" "arm,cortex-a53" "arm,cortex-a57" + "arm,cortex-a72" "arm,cortex-m0" "arm,cortex-m0+" "arm,cortex-m1" diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile index bb3c07209676..c0bf56b9ce3d 100644 --- a/arch/arm64/boot/dts/arm/Makefile +++ b/arch/arm64/boot/dts/arm/Makefile @@ -1,5 +1,5 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb -dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb +dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb juno-r2.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2f-1xv7-ca53x2.dtb diff --git a/arch/arm64/boot/dts/arm/juno-r2.dts b/arch/arm64/boot/dts/arm/juno-r2.dts new file mode 100644 index 000000000000..7ca939032373 --- /dev/null +++ b/arch/arm64/boot/dts/arm/juno-r2.dts @@ -0,0 +1,200 @@ +/* + * ARM Ltd. Juno Platform + * + * Copyright (c) 2015 ARM Ltd. + * + * This file is licensed under a dual GPLv2 or BSD license. + */ + +/dts-v1/; + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "ARM Juno development board (r2)"; + compatible = "arm,juno-r2", "arm,juno", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &soc_uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&A72_0>; + }; + core1 { + cpu = <&A72_1>; + }; + }; + + cluster1 { + core0 { + cpu = <&A53_0>; + }; + core1 { + cpu = <&A53_1>; + }; + core2 { + cpu = <&A53_2>; + }; + core3 { + cpu = <&A53_3>; + }; + }; + }; + + idle-states { + entry-method = "arm,psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <300>; + exit-latency-us = <1200>; + min-residency-us = <2000>; + }; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x1010000>; + local-timer-stop; + entry-latency-us = <300>; + exit-latency-us = <1200>; + min-residency-us = <2500>; + }; + }; + + A72_0: cpu@0 { + compatible = "arm,cortex-a72","arm,armv8"; + reg = <0x0 0x0>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A72_L2>; + clocks = <&scpi_dvfs 0>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + + A72_1: cpu@1 { + compatible = "arm,cortex-a72","arm,armv8"; + reg = <0x0 0x1>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A72_L2>; + clocks = <&scpi_dvfs 0>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + + A53_0: cpu@100 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x100>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + + A53_1: cpu@101 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x101>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + + A53_2: cpu@102 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x102>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + + A53_3: cpu@103 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x103>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + + A72_L2: l2-cache0 { + compatible = "cache"; + }; + + A53_L2: l2-cache1 { + compatible = "cache"; + }; + }; + + pmu_a72 { + compatible = "arm,cortex-a72-pmu"; + interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&A72_0>, + <&A72_1>; + }; + + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&A53_0>, + <&A53_1>, + <&A53_2>, + <&A53_3>; + }; + + #include "juno-base.dtsi" + + pcie-controller@40000000 { + compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", "pci-host-ecam-generic"; + device_type = "pci"; + reg = <0 0x40000000 0 0x10000000>; /* ECAM config space */ + bus-range = <0 255>; + linux,pci-domain = <0>; + #address-cells = <3>; + #size-cells = <2>; + dma-coherent; + ranges = <0x01000000 0x00 0x5f800000 0x00 0x5f800000 0x0 0x00800000>, + <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>, + <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &gic 0 0 0 136 4>, + <0 0 0 2 &gic 0 0 0 137 4>, + <0 0 0 3 &gic 0 0 0 138 4>, + <0 0 0 4 &gic 0 0 0 139 4>; + msi-parent = <&v2m_0>; + }; +}; + +&memtimer { + status = "okay"; +};