| Message ID | 1474615449-16893-1-git-send-email-shawn.guo@linaro.org |
|---|---|
| State | New |
| Headers | show |
On Fri, Sep 23, 2016 at 03:24:08PM +0800, Shawn Guo wrote: > It adds initial bindings doc for ZTE VOU display controller. HDMI is > the only supported output device right now. > > Signed-off-by: Shawn Guo <shawn.guo@linaro.org> > --- > .../devicetree/bindings/display/zte,vou.txt | 67 ++++++++++++++++++++++ > 1 file changed, 67 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/zte,vou.txt > > diff --git a/Documentation/devicetree/bindings/display/zte,vou.txt b/Documentation/devicetree/bindings/display/zte,vou.txt > new file mode 100644 > index 000000000000..b7407219cfa1 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/zte,vou.txt > @@ -0,0 +1,67 @@ > +ZTE VOU Display Controller > + > +This is a display controller found on ZTE ZX296718 SoC. It includes multiple > +Graphic Layer (GL) and Video Layer (VL), two Mixers/Channels, and a few blocks > +handling scaling, color space conversion etc. VOU also integrates the support > +for typical output devices, like HDMI, TV Encoder, VGA, and RGB LCD. > + > +* Master display-subsystem node > + > +It must be the parent node of all the sub-device nodes. > + > +Required properties: > + - compatible: should be "zte,zx-display-subsystem" > + - #address-cells: should be <1> > + - #size-cells: should be <1> > + - ranges: to allow probing of sub-devices > + > +* VOU controller device > + > +Required properties: > + - compatible: should be "zte,zx296718-vou" > + - reg: Physical base address and length of the whole VOU IO region > + - interrupts: VOU interrupt number to the CPU > + - clocks: A list of phandle + clock-specifier pairs, one for each entry > + in 'clock-names' > + - clock-names: A list of clock names. It should contain: "aclk", "ppu_wclk", > + "main_wclk" and "aux_wclk". > + > +* HDMI output device > + > +Required properties: > + - compatible: should be "zte,zx296718-hdmi" > + - reg: Physical base address and length of the HDMI device IO region > + - interrupts : HDMI interrupt number to the CPU > + - clocks: A list of phandle + clock-specifier pairs, one for each entry > + in 'clock-names' > + - clock-names: A list of clock names. It should contain: "osc_cec", "osc_clk" > + and "xclk". > + > +Example: > + > +display-subsystem { > + compatible = "zte,zx-display-subsystem"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + vou: vou@1440000 { > + compatible = "zte,zx296718-vou"; > + reg = <0x1440000 0x10000>; > + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&topcrm VOU_ACLK>, <&topcrm VOU_PPU_WCLK>, > + <&topcrm VOU_MAIN_WCLK>, <&topcrm VOU_AUX_WCLK>; > + clock-names = "aclk", "ppu_wclk", > + "main_wclk", "aux_wclk"; > + }; > + > + hdmi: hdmi@144c000 { > + compatible = "zte,zx296718-hdmi"; > + reg = <0x144c000 0x4000>; You have overlapping regions here. I'd suggest you kill off zte,zx-display-subsystem and make zte,zx296718-vou the top-level node with hdmi and others as the child nodes. > + interrupts = <GIC_SPI 82 IRQ_TYPE_EDGE_RISING>; > + clocks = <&topcrm HDMI_OSC_CEC>, > + <&topcrm HDMI_OSC_CLK>, > + <&topcrm HDMI_XCLK>; > + clock-names = "osc_cec", "osc_clk", "xclk"; > + }; > +}; > -- > 1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/display/zte,vou.txt b/Documentation/devicetree/bindings/display/zte,vou.txt new file mode 100644 index 000000000000..b7407219cfa1 --- /dev/null +++ b/Documentation/devicetree/bindings/display/zte,vou.txt @@ -0,0 +1,67 @@ +ZTE VOU Display Controller + +This is a display controller found on ZTE ZX296718 SoC. It includes multiple +Graphic Layer (GL) and Video Layer (VL), two Mixers/Channels, and a few blocks +handling scaling, color space conversion etc. VOU also integrates the support +for typical output devices, like HDMI, TV Encoder, VGA, and RGB LCD. + +* Master display-subsystem node + +It must be the parent node of all the sub-device nodes. + +Required properties: + - compatible: should be "zte,zx-display-subsystem" + - #address-cells: should be <1> + - #size-cells: should be <1> + - ranges: to allow probing of sub-devices + +* VOU controller device + +Required properties: + - compatible: should be "zte,zx296718-vou" + - reg: Physical base address and length of the whole VOU IO region + - interrupts: VOU interrupt number to the CPU + - clocks: A list of phandle + clock-specifier pairs, one for each entry + in 'clock-names' + - clock-names: A list of clock names. It should contain: "aclk", "ppu_wclk", + "main_wclk" and "aux_wclk". + +* HDMI output device + +Required properties: + - compatible: should be "zte,zx296718-hdmi" + - reg: Physical base address and length of the HDMI device IO region + - interrupts : HDMI interrupt number to the CPU + - clocks: A list of phandle + clock-specifier pairs, one for each entry + in 'clock-names' + - clock-names: A list of clock names. It should contain: "osc_cec", "osc_clk" + and "xclk". + +Example: + +display-subsystem { + compatible = "zte,zx-display-subsystem"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vou: vou@1440000 { + compatible = "zte,zx296718-vou"; + reg = <0x1440000 0x10000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&topcrm VOU_ACLK>, <&topcrm VOU_PPU_WCLK>, + <&topcrm VOU_MAIN_WCLK>, <&topcrm VOU_AUX_WCLK>; + clock-names = "aclk", "ppu_wclk", + "main_wclk", "aux_wclk"; + }; + + hdmi: hdmi@144c000 { + compatible = "zte,zx296718-hdmi"; + reg = <0x144c000 0x4000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_EDGE_RISING>; + clocks = <&topcrm HDMI_OSC_CEC>, + <&topcrm HDMI_OSC_CLK>, + <&topcrm HDMI_XCLK>; + clock-names = "osc_cec", "osc_clk", "xclk"; + }; +};
It adds initial bindings doc for ZTE VOU display controller. HDMI is the only supported output device right now. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> --- .../devicetree/bindings/display/zte,vou.txt | 67 ++++++++++++++++++++++ 1 file changed, 67 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/zte,vou.txt -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html