| Message ID | 1472633417-9330-3-git-send-email-leo.yan@linaro.org |
|---|---|
| State | Accepted |
| Commit | f05f4821268d9c5904fe60c859390360b2898783 |
| Headers | show |
On Sat, 2016-11-12 at 20:05 +0800, Leo Yan wrote: > Hi Rui, Eduardo, > > On Wed, Aug 31, 2016 at 04:50:16PM +0800, Leo Yan wrote: > > > > The thermal driver is standalone driver which is used to enable > > thermal sensors, so it can be used with any cooling device and > > should not bind with CPU cooling device driver. > > > > This original patch is suggested by Amit Kucheria; so it's to > > polish the dependency in Kconfig, and remove the dependency with > > CPU_THERMAL. > Could you help review this patch? Or need me resend this patch? Sorry > I have not tracked this patches well before, this is one missed > patch for 96board Hikey. > as it still applies cleanly, the patch is queued for 4.10. thanks, rui > Thanks, > Leo Yan > > > > > Signed-off-by: Leo Yan <leo.yan@linaro.org> > > --- > > drivers/thermal/Kconfig | 4 +++- > > 1 file changed, 3 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig > > index 2d702ca..91ebab3 100644 > > --- a/drivers/thermal/Kconfig > > +++ b/drivers/thermal/Kconfig > > @@ -177,8 +177,10 @@ config THERMAL_EMULATION > > > > config HISI_THERMAL > > tristate "Hisilicon thermal driver" > > - depends on (ARCH_HISI && CPU_THERMAL && OF) || > > COMPILE_TEST > > + depends on ARCH_HISI || COMPILE_TEST > > depends on HAS_IOMEM > > + depends on OF > > + default y > > help > > Enable this to plug hisilicon's thermal sensor driver > > into the Linux > > thermal framework. cpufreq is used as the cooling device > > to throttle -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Nov 15, 2016 at 08:24:55PM +0800, Zhang Rui wrote: > On Sat, 2016-11-12 at 20:05 +0800, Leo Yan wrote: > > Hi Rui, Eduardo, > > > > On Wed, Aug 31, 2016 at 04:50:16PM +0800, Leo Yan wrote: > > > > > > The thermal driver is standalone driver which is used to enable > > > thermal sensors, so it can be used with any cooling device and > > > should not bind with CPU cooling device driver. > > > > > > This original patch is suggested by Amit Kucheria; so it's to > > > polish the dependency in Kconfig, and remove the dependency with > > > CPU_THERMAL. > > Could you help review this patch? Or need me resend this patch? Sorry > > I have not tracked this patches well before, this is one missed > > patch for 96board Hikey. > > > as it still applies cleanly, the patch is queued for 4.10. Thanks a lot. > thanks, > rui > > Thanks, > > Leo Yan > > > > > > > > Signed-off-by: Leo Yan <leo.yan@linaro.org> > > > --- > > > drivers/thermal/Kconfig | 4 +++- > > > 1 file changed, 3 insertions(+), 1 deletion(-) > > > > > > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig > > > index 2d702ca..91ebab3 100644 > > > --- a/drivers/thermal/Kconfig > > > +++ b/drivers/thermal/Kconfig > > > @@ -177,8 +177,10 @@ config THERMAL_EMULATION > > > > > > config HISI_THERMAL > > > tristate "Hisilicon thermal driver" > > > - depends on (ARCH_HISI && CPU_THERMAL && OF) || > > > COMPILE_TEST > > > + depends on ARCH_HISI || COMPILE_TEST > > > depends on HAS_IOMEM > > > + depends on OF > > > + default y > > > help > > > Enable this to plug hisilicon's thermal sensor driver > > > into the Linux > > > thermal framework. cpufreq is used as the cooling device > > > to throttle -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 2d702ca..91ebab3 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -177,8 +177,10 @@ config THERMAL_EMULATION config HISI_THERMAL tristate "Hisilicon thermal driver" - depends on (ARCH_HISI && CPU_THERMAL && OF) || COMPILE_TEST + depends on ARCH_HISI || COMPILE_TEST depends on HAS_IOMEM + depends on OF + default y help Enable this to plug hisilicon's thermal sensor driver into the Linux thermal framework. cpufreq is used as the cooling device to throttle
The thermal driver is standalone driver which is used to enable thermal sensors, so it can be used with any cooling device and should not bind with CPU cooling device driver. This original patch is suggested by Amit Kucheria; so it's to polish the dependency in Kconfig, and remove the dependency with CPU_THERMAL. Signed-off-by: Leo Yan <leo.yan@linaro.org> --- drivers/thermal/Kconfig | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html