@@ -82,7 +82,17 @@
bias-pull-down;
};
- /* msm otg HSUSB_VDDCX */
+ /* wcnss_wlan.0-iris_vddrfa */
+ s2 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ qcom,switch-mode-frequency = <1600000>;
+ };
+
+ /*
+ * msm otg HSUSB_VDDCX
+ * wcnss_wlan.0-riva_vddcx
+ */
s3 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1150000>;
@@ -95,6 +105,7 @@
* tabla2x-slim-CDC_VDDA_TX
* tabla2x-slim-CDC_VDD_CP
* tabla2x-slim-VDDIO_CDC
+ * wcnss_wlan.0-riva_vddpx
*/
s4 {
regulator-min-microvolt = <1800000>;
@@ -123,7 +134,10 @@
bias-pull-down;
};
- /* msm_otg-HSUSB_1p8 */
+ /*
+ * msm_otg-HSUSB_1p8
+ * wcnss_wlan.0-iris_vddxo
+ */
l4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -143,6 +157,12 @@
regulator-max-microvolt = <2950000>;
};
+ /* wcnss_wlan.0-iris_vddpa */
+ l10 {
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ };
+
/* mipi_dsi.1-dsi1_avdd */
l11 {
regulator-min-microvolt = <3000000>;
@@ -165,6 +185,12 @@
bias-pull-down;
};
+ /* wcnss_wlan.0-riva_vddmx */
+ l24 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1150000>;
+ };
+
/*
* tabla2x-slim-CDC_VDDA_A_1P2V
* tabla2x-slim-VDDD_CDC_D
@@ -175,10 +201,15 @@
bias-pull-down;
};
+ /* wcnss_wlan.0-iris_vddio */
lvs1 {
bias-pull-down;
};
+ /* wcnss_wlan.0-iris_vdddig */
+ lvs2 {
+ };
+
lvs4 {
bias-pull-down;
};
@@ -196,6 +227,7 @@
*/
lvs7 {
bias-pull-down;
+ regulator-always-on;
};
};
};
@@ -340,6 +372,12 @@
};
};
+ riva-pil@3204000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&riva_wlan_pin_a>;
+ };
+
imem@2a03f000 {
compatible = "syscon", "simple-mfd";
reg = <0x2a03f000 0x1000>;
Tweak and add some regulator entries that are needed to support wifi. The values here were taken from: arch/arm/mach-msm/asustek/flo/board-flo-regulator.c in the AOSP msm 3.4 flo branch. This also adds a wcnss entry so it gets enabled on the board. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Nicolas Dechesne <nicolas.dechesne@linaro.org> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: Andy Gross <andy.gross@linaro.org> Cc: Rob Clark <robdclark@gmail.com> Cc: Vinay Simha <simhavcs@gmail.com> Cc: David Brown <david.brown@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: John Stults <john.stultz@linaro.org> --- arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts | 42 ++++++++++++++++++++-- 1 file changed, 40 insertions(+), 2 deletions(-) -- 2.7.4