| Message ID | 20170821144003.49436-1-salil.mehta@huawei.com |
|---|---|
| State | Superseded |
| Headers | show |
On Mon, Aug 21, 2017 at 03:40:03PM +0100, Salil Mehta wrote: > This patch adds the following support to the HNS3 driver: > 1. Support to change the Maximum Transmission Unit of a > port in the HNS NIC hardware. > 2. Initializes the supported MTU range for the netdevice. > > Signed-off-by: lipeng <lipeng321@huawei.com> > Signed-off-by: Salil Mehta <salil.mehta@huawei.com> > --- > PATCH V4: Addressed some minor comments Leon Romanovsky > 1. https://lkml.org/lkml/2017/8/21/212 > PATCH V3: Addressed some minor comments Leon Romanovsky > 1. https://lkml.org/lkml/2017/8/20/27 > PATCH V2: Addresses comments given by Andrew Lunn > 1. https://lkml.org/lkml/2017/8/18/282 > PATCH V1: Initial Submit > --- > .../net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c | 34 ++++++++++++++++++++++ > .../net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.h | 1 + > 2 files changed, 35 insertions(+) > Wrong error code is not "minor" comment. Thanks, Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Sorry, Please ignore this mail. I forgot to add the Andrew Lunn signed-off-by Tag will this patch. I will add the tag and send the updated version of V4 again. Sorry again. > -----Original Message----- > From: Salil Mehta > Sent: Monday, August 21, 2017 3:40 PM > To: davem@davemloft.net > Cc: Salil Mehta; Zhuangyuzeng (Yisen); lipeng (Y); > mehta.salil.lnk@gmail.com; netdev@vger.kernel.org; linux- > kernel@vger.kernel.org; linux-rdma@vger.kernel.org; Linuxarm > Subject: [PATCH V4 net-next] net: hns3: Add support to change MTU in > HNS3 hardware > > This patch adds the following support to the HNS3 driver: > 1. Support to change the Maximum Transmission Unit of a > port in the HNS NIC hardware. > 2. Initializes the supported MTU range for the netdevice. > > Signed-off-by: lipeng <lipeng321@huawei.com> > Signed-off-by: Salil Mehta <salil.mehta@huawei.com> > --- > PATCH V4: Addressed some minor comments Leon Romanovsky > 1. https://lkml.org/lkml/2017/8/21/212 > PATCH V3: Addressed some minor comments Leon Romanovsky > 1. https://lkml.org/lkml/2017/8/20/27 > PATCH V2: Addresses comments given by Andrew Lunn > 1. https://lkml.org/lkml/2017/8/18/282 > PATCH V1: Initial Submit > --- > .../net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c | 34 > ++++++++++++++++++++++ > .../net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.h | 1 + > 2 files changed, 35 insertions(+) > > diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c > b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c > index e731f87..1c3e294 100644 > --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c > +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c > @@ -1278,11 +1278,42 @@ static int hns3_ndo_set_vf_vlan(struct > net_device *netdev, int vf, u16 vlan, > return ret; > } > > +static int hns3_nic_change_mtu(struct net_device *netdev, int new_mtu) > +{ > + struct hns3_nic_priv *priv = netdev_priv(netdev); > + struct hnae3_handle *h = priv->ae_handle; > + bool if_running = netif_running(netdev); > + int ret; > + > + if (!h->ae_algo->ops->set_mtu) > + return -EOPNOTSUPP; > + > + /* if this was called with netdev up then bring netdevice down */ > + if (if_running) { > + (void)hns3_nic_net_stop(netdev); > + msleep(100); > + } > + > + ret = h->ae_algo->ops->set_mtu(h, new_mtu); > + if (ret) { > + netdev_err(netdev, "failed to change MTU in hardware %d\n", > + ret); > + return ret; > + } > + > + /* if the netdev was running earlier, bring it up again */ > + if (if_running && hns3_nic_net_open(netdev)) > + ret = -EINVAL; > + > + return ret; > +} > + > static const struct net_device_ops hns3_nic_netdev_ops = { > .ndo_open = hns3_nic_net_open, > .ndo_stop = hns3_nic_net_stop, > .ndo_start_xmit = hns3_nic_net_xmit, > .ndo_set_mac_address = hns3_nic_net_set_mac_address, > + .ndo_change_mtu = hns3_nic_change_mtu, > .ndo_set_features = hns3_nic_set_features, > .ndo_get_stats64 = hns3_nic_get_stats64, > .ndo_setup_tc = hns3_nic_setup_tc, > @@ -2752,6 +2783,9 @@ static int hns3_client_init(struct hnae3_handle > *handle) > goto out_reg_netdev_fail; > } > > + /* MTU range: (ETH_MIN_MTU(kernel default) - 9706) */ > + netdev->max_mtu = HNS3_MAX_MTU - (ETH_HLEN + ETH_FCS_LEN + > VLAN_HLEN); > + > return ret; > > out_reg_netdev_fail: > diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.h > b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.h > index a6e8f15..7e87461 100644 > --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.h > +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.h > @@ -76,6 +76,7 @@ enum hns3_nic_state { > #define HNS3_RING_NAME_LEN 16 > #define HNS3_BUFFER_SIZE_2048 2048 > #define HNS3_RING_MAX_PENDING 32768 > +#define HNS3_MAX_MTU 9728 > > #define HNS3_BD_SIZE_512_TYPE 0 > #define HNS3_BD_SIZE_1024_TYPE 1 > -- > 2.7.4 >
Hi Leon, > -----Original Message----- > From: Leon Romanovsky [mailto:leon@kernel.org] > Sent: Monday, August 21, 2017 3:49 PM > To: Salil Mehta > Cc: davem@davemloft.net; Zhuangyuzeng (Yisen); lipeng (Y); > mehta.salil.lnk@gmail.com; netdev@vger.kernel.org; linux- > kernel@vger.kernel.org; linux-rdma@vger.kernel.org; Linuxarm > Subject: Re: [PATCH V4 net-next] net: hns3: Add support to change MTU > in HNS3 hardware > > On Mon, Aug 21, 2017 at 03:40:03PM +0100, Salil Mehta wrote: > > This patch adds the following support to the HNS3 driver: > > 1. Support to change the Maximum Transmission Unit of a > > port in the HNS NIC hardware. > > 2. Initializes the supported MTU range for the netdevice. > > > > Signed-off-by: lipeng <lipeng321@huawei.com> > > Signed-off-by: Salil Mehta <salil.mehta@huawei.com> > > --- > > PATCH V4: Addressed some minor comments Leon Romanovsky > > 1. https://lkml.org/lkml/2017/8/21/212 > > PATCH V3: Addressed some minor comments Leon Romanovsky > > 1. https://lkml.org/lkml/2017/8/20/27 > > PATCH V2: Addresses comments given by Andrew Lunn > > 1. https://lkml.org/lkml/2017/8/18/282 > > PATCH V1: Initial Submit > > --- > > .../net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c | 34 > ++++++++++++++++++++++ > > .../net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.h | 1 + > > 2 files changed, 35 insertions(+) > > > > Wrong error code is not "minor" comment. Sorry for the wrong terminology used. Both of the comments were definitely useful and I have taken into consideration both of them in my recent patch. I think I missed it while replying, saw it while and created the patch later. Sorry for that again. I will correct this in my subsequent patch. Best regards Salil > > Thanks, > Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c index e731f87..1c3e294 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c @@ -1278,11 +1278,42 @@ static int hns3_ndo_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, return ret; } +static int hns3_nic_change_mtu(struct net_device *netdev, int new_mtu) +{ + struct hns3_nic_priv *priv = netdev_priv(netdev); + struct hnae3_handle *h = priv->ae_handle; + bool if_running = netif_running(netdev); + int ret; + + if (!h->ae_algo->ops->set_mtu) + return -EOPNOTSUPP; + + /* if this was called with netdev up then bring netdevice down */ + if (if_running) { + (void)hns3_nic_net_stop(netdev); + msleep(100); + } + + ret = h->ae_algo->ops->set_mtu(h, new_mtu); + if (ret) { + netdev_err(netdev, "failed to change MTU in hardware %d\n", + ret); + return ret; + } + + /* if the netdev was running earlier, bring it up again */ + if (if_running && hns3_nic_net_open(netdev)) + ret = -EINVAL; + + return ret; +} + static const struct net_device_ops hns3_nic_netdev_ops = { .ndo_open = hns3_nic_net_open, .ndo_stop = hns3_nic_net_stop, .ndo_start_xmit = hns3_nic_net_xmit, .ndo_set_mac_address = hns3_nic_net_set_mac_address, + .ndo_change_mtu = hns3_nic_change_mtu, .ndo_set_features = hns3_nic_set_features, .ndo_get_stats64 = hns3_nic_get_stats64, .ndo_setup_tc = hns3_nic_setup_tc, @@ -2752,6 +2783,9 @@ static int hns3_client_init(struct hnae3_handle *handle) goto out_reg_netdev_fail; } + /* MTU range: (ETH_MIN_MTU(kernel default) - 9706) */ + netdev->max_mtu = HNS3_MAX_MTU - (ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN); + return ret; out_reg_netdev_fail: diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.h index a6e8f15..7e87461 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.h @@ -76,6 +76,7 @@ enum hns3_nic_state { #define HNS3_RING_NAME_LEN 16 #define HNS3_BUFFER_SIZE_2048 2048 #define HNS3_RING_MAX_PENDING 32768 +#define HNS3_MAX_MTU 9728 #define HNS3_BD_SIZE_512_TYPE 0 #define HNS3_BD_SIZE_1024_TYPE 1