| Message ID | 1503054141-80272-1-git-send-email-gabriele.paoloni@huawei.com |
|---|---|
| State | Superseded |
| Headers | show |
ping... > -----Original Message----- > From: Gabriele Paoloni > Sent: 18 August 2017 12:02 > To: helgaas@kernel.org > Cc: Gabriele Paoloni; Linuxarm; liudongdong (C); linux- > pci@vger.kernel.org; linux-kernel@vger.kernel.org > Subject: [PATCH v2] PCIe AER: report uncorrectable errors only to the > functions that logged the errors > > Currently if an uncorrectable error is reported by an EP the AER > driver walks over all the devices connected to the upstream port > bus and in turns call the report_error_detected() callback. > If any of the devices connected to the bus does not implement > dev->driver->err_handler->error_detected() do_recovery() will fail > leaving all the bus hierarchy devices unrecovered. > > However for non fatal errors the PCIe link should not be considered > compromised, therefore it makes sense to report the error only to > all the functions that logged an error. > This patch implements this new behaviour for non fatal errors. > > Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> > Signed-off-by: Dongdong Liu <liudongdong3@huawei.com> > --- > Changes from v1: > - now errors are reported only to the fucntions that logged the > error > instead of all the functions in the same device. > - the patch subject has changed to match the new implementation > --- > drivers/pci/pcie/aer/aerdrv_core.c | 9 ++++++++- > 1 file changed, 8 insertions(+), 1 deletion(-) > > diff --git a/drivers/pci/pcie/aer/aerdrv_core.c > b/drivers/pci/pcie/aer/aerdrv_core.c > index b1303b3..057465ad 100644 > --- a/drivers/pci/pcie/aer/aerdrv_core.c > +++ b/drivers/pci/pcie/aer/aerdrv_core.c > @@ -390,7 +390,14 @@ static pci_ers_result_t > broadcast_error_message(struct pci_dev *dev, > * If the error is reported by an end point, we think this > * error is related to the upstream link of the end point. > */ > - pci_walk_bus(dev->bus, cb, &result_data); > + if (state == pci_channel_io_normal) > + /* > + * the error is non fatal so the bus is ok, just > invoke > + * the callback for the function that logged the > error. > + */ > + cb(dev, &result_data); > + else > + pci_walk_bus(dev->bus, cb, &result_data); > } > > return result_data.result; > -- > 2.7.4 >
On Fri, Aug 18, 2017 at 12:02:21PM +0100, Gabriele Paoloni wrote: > Currently if an uncorrectable error is reported by an EP the AER > driver walks over all the devices connected to the upstream port > bus and in turns call the report_error_detected() callback. > If any of the devices connected to the bus does not implement > dev->driver->err_handler->error_detected() do_recovery() will fail > leaving all the bus hierarchy devices unrecovered. > > However for non fatal errors the PCIe link should not be considered > compromised, therefore it makes sense to report the error only to > all the functions that logged an error. Can you include a pointer to the relevant part of the spec here? > This patch implements this new behaviour for non fatal errors. > > Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> > Signed-off-by: Dongdong Liu <liudongdong3@huawei.com> > --- > Changes from v1: > - now errors are reported only to the fucntions that logged the error > instead of all the functions in the same device. > - the patch subject has changed to match the new implementation > --- > drivers/pci/pcie/aer/aerdrv_core.c | 9 ++++++++- > 1 file changed, 8 insertions(+), 1 deletion(-) > > diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c > index b1303b3..057465ad 100644 > --- a/drivers/pci/pcie/aer/aerdrv_core.c > +++ b/drivers/pci/pcie/aer/aerdrv_core.c > @@ -390,7 +390,14 @@ static pci_ers_result_t broadcast_error_message(struct pci_dev *dev, > * If the error is reported by an end point, we think this > * error is related to the upstream link of the end point. > */ > - pci_walk_bus(dev->bus, cb, &result_data); > + if (state == pci_channel_io_normal) > + /* > + * the error is non fatal so the bus is ok, just invoke > + * the callback for the function that logged the error. > + */ > + cb(dev, &result_data); > + else > + pci_walk_bus(dev->bus, cb, &result_data); I think the concept of this change makes sense, but I don't like the implicit connection of PCI_ERR_ROOT_UNCOR_RCV -> AER_NONFATAL -> pci_channel_io_normal. That makes it harder than it should be to read the code. What would you think of changing the signature of do_recovery() and broadcast_error_message() so they take the struct aer_err_info pointer instead of just the severity and pci_channel_state? Then we could check directly for AER_NONFATAL here. Bjorn
On Thu, Aug 31, 2017 at 03:03:44PM -0500, Bjorn Helgaas wrote: > On Fri, Aug 18, 2017 at 12:02:21PM +0100, Gabriele Paoloni wrote: > > Currently if an uncorrectable error is reported by an EP the AER > > driver walks over all the devices connected to the upstream port > > bus and in turns call the report_error_detected() callback. > > If any of the devices connected to the bus does not implement > > dev->driver->err_handler->error_detected() do_recovery() will fail > > leaving all the bus hierarchy devices unrecovered. > > > > However for non fatal errors the PCIe link should not be considered > > compromised, therefore it makes sense to report the error only to > > all the functions that logged an error. > > Can you include a pointer to the relevant part of the spec here? Also, I forgot to ask: can you outline the problem this fixes? I'm curious about why this hasn't been an issue in the past. My guess is there's something new about your configuration, and the config and the symptoms might help connect this fix to similar problems. > > This patch implements this new behaviour for non fatal errors. > > > > Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> > > Signed-off-by: Dongdong Liu <liudongdong3@huawei.com> > > --- > > Changes from v1: > > - now errors are reported only to the fucntions that logged the error > > instead of all the functions in the same device. > > - the patch subject has changed to match the new implementation > > --- > > drivers/pci/pcie/aer/aerdrv_core.c | 9 ++++++++- > > 1 file changed, 8 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c > > index b1303b3..057465ad 100644 > > --- a/drivers/pci/pcie/aer/aerdrv_core.c > > +++ b/drivers/pci/pcie/aer/aerdrv_core.c > > @@ -390,7 +390,14 @@ static pci_ers_result_t broadcast_error_message(struct pci_dev *dev, > > * If the error is reported by an end point, we think this > > * error is related to the upstream link of the end point. > > */ > > - pci_walk_bus(dev->bus, cb, &result_data); > > + if (state == pci_channel_io_normal) > > + /* > > + * the error is non fatal so the bus is ok, just invoke > > + * the callback for the function that logged the error. > > + */ > > + cb(dev, &result_data); > > + else > > + pci_walk_bus(dev->bus, cb, &result_data); > > I think the concept of this change makes sense, but I don't like the > implicit connection of PCI_ERR_ROOT_UNCOR_RCV -> AER_NONFATAL -> > pci_channel_io_normal. That makes it harder than it should be to read > the code. > > What would you think of changing the signature of do_recovery() and > broadcast_error_message() so they take the struct aer_err_info pointer > instead of just the severity and pci_channel_state? Then we could > check directly for AER_NONFATAL here. > > Bjorn
Hi Bjorn Many thanks for looking at this > -----Original Message----- > From: Bjorn Helgaas [mailto:helgaas@kernel.org] > Sent: 01 September 2017 05:43 > To: Gabriele Paoloni > Cc: Linuxarm; liudongdong (C); linux-pci@vger.kernel.org; linux- > kernel@vger.kernel.org > Subject: Re: [PATCH v2] PCIe AER: report uncorrectable errors only to > the functions that logged the errors > > On Thu, Aug 31, 2017 at 03:03:44PM -0500, Bjorn Helgaas wrote: > > On Fri, Aug 18, 2017 at 12:02:21PM +0100, Gabriele Paoloni wrote: > > > Currently if an uncorrectable error is reported by an EP the AER > > > driver walks over all the devices connected to the upstream port > > > bus and in turns call the report_error_detected() callback. > > > If any of the devices connected to the bus does not implement > > > dev->driver->err_handler->error_detected() do_recovery() will fail > > > leaving all the bus hierarchy devices unrecovered. > > > > > > However for non fatal errors the PCIe link should not be considered > > > compromised, therefore it makes sense to report the error only to > > > all the functions that logged an error. > > > > Can you include a pointer to the relevant part of the spec here? Sure According to section "6.2.2.2.2. Non-Fatal Errors" << Non-fatal errors are uncorrectable errors which cause a particular transaction to be unreliable but the Link is otherwise fully functional. Isolating Non-fatal from Fatal errors provides Requester/Receiver logic in a device or system management software the opportunity to recover from the error without resetting the components on the Link and disturbing other transactions in progress. Devices not associated with the transaction in error are not impacted by the error.>> I will add it to the commit msg: > > Also, I forgot to ask: can you outline the problem this fixes? I'm > curious about why this hasn't been an issue in the past. My guess is > there's something new about your configuration, and the config and the > symptoms might help connect this fix to similar problems. I already replied about this in the previous patch... << In Hi1620 we have some integrated controllers that appear as PCIe EPs under the same bus. Some of these controllers (e.g. the SATA controller) are missing the err_handler callbacks. If one device reports a non-fatal uncorrectable error with the current AER core code the callbacks for all the devices under the same bus will be called and, if any of the devices is missing the callback all the devices in the subtree are left in error state without recovery... This patch is needed to sort out a situation like this one.>> Should I add this to the commit msg? > > > > This patch implements this new behaviour for non fatal errors. > > > > > > Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> > > > Signed-off-by: Dongdong Liu <liudongdong3@huawei.com> > > > --- > > > Changes from v1: > > > - now errors are reported only to the fucntions that logged the > error > > > instead of all the functions in the same device. > > > - the patch subject has changed to match the new implementation > > > --- > > > drivers/pci/pcie/aer/aerdrv_core.c | 9 ++++++++- > > > 1 file changed, 8 insertions(+), 1 deletion(-) > > > > > > diff --git a/drivers/pci/pcie/aer/aerdrv_core.c > b/drivers/pci/pcie/aer/aerdrv_core.c > > > index b1303b3..057465ad 100644 > > > --- a/drivers/pci/pcie/aer/aerdrv_core.c > > > +++ b/drivers/pci/pcie/aer/aerdrv_core.c > > > @@ -390,7 +390,14 @@ static pci_ers_result_t > broadcast_error_message(struct pci_dev *dev, > > > * If the error is reported by an end point, we think this > > > * error is related to the upstream link of the end point. > > > */ > > > - pci_walk_bus(dev->bus, cb, &result_data); > > > + if (state == pci_channel_io_normal) > > > + /* > > > + * the error is non fatal so the bus is ok, just > invoke > > > + * the callback for the function that logged the > error. > > > + */ > > > + cb(dev, &result_data); > > > + else > > > + pci_walk_bus(dev->bus, cb, &result_data); > > > > I think the concept of this change makes sense, but I don't like the > > implicit connection of PCI_ERR_ROOT_UNCOR_RCV -> AER_NONFATAL -> > > pci_channel_io_normal. That makes it harder than it should be to > read > > the code. > > > > What would you think of changing the signature of do_recovery() and > > broadcast_error_message() so they take the struct aer_err_info > pointer > > instead of just the severity and pci_channel_state? Then we could > > check directly for AER_NONFATAL here. I think the main issue of this approach is aer_recover_work_func()->do_recovery() If we modify the signature of do_recovery() we also need to modify struct aer_recover_entry to embed aer_err_info sub struct (and anyway so far there is no hook to aer_err_info in ghes.c...so it seems to me like unfeasible...) I think we can either add a severity field to broadcast_error_message() or move enum pci_channel_state state; if (severity == AER_FATAL) state = pci_channel_io_frozen; else state = pci_channel_io_normal; inside broadcast_error_message() In both cases we make the code more readable but we add redundancy... Thoughts? Thanks again Gab > > > > Bjorn
On Fri, Sep 01, 2017 at 11:39:35AM +0000, Gabriele Paoloni wrote: > Hi Bjorn > > Many thanks for looking at this > > > -----Original Message----- > > From: Bjorn Helgaas [mailto:helgaas@kernel.org] > > Sent: 01 September 2017 05:43 > > To: Gabriele Paoloni > > Cc: Linuxarm; liudongdong (C); linux-pci@vger.kernel.org; linux- > > kernel@vger.kernel.org > > Subject: Re: [PATCH v2] PCIe AER: report uncorrectable errors only to > > the functions that logged the errors > > > > On Thu, Aug 31, 2017 at 03:03:44PM -0500, Bjorn Helgaas wrote: > > > On Fri, Aug 18, 2017 at 12:02:21PM +0100, Gabriele Paoloni wrote: > > > > Currently if an uncorrectable error is reported by an EP the AER > > > > driver walks over all the devices connected to the upstream port > > > > bus and in turns call the report_error_detected() callback. > > > > If any of the devices connected to the bus does not implement > > > > dev->driver->err_handler->error_detected() do_recovery() will fail > > > > leaving all the bus hierarchy devices unrecovered. > > > > > > > > However for non fatal errors the PCIe link should not be considered > > > > compromised, therefore it makes sense to report the error only to > > > > all the functions that logged an error. > > > > > > Can you include a pointer to the relevant part of the spec here? > > Sure > According to section "6.2.2.2.2. Non-Fatal Errors" > << Non-fatal errors are uncorrectable errors which cause a particular > transaction to be unreliable but the Link is otherwise fully functional. > Isolating Non-fatal from Fatal errors provides Requester/Receiver logic > in a device or system management software the opportunity to recover > from the error without resetting the components on the Link and > disturbing other transactions in progress. Devices not associated with > the transaction in error are not impacted by the error.>> > > I will add it to the commit msg: > > > > > Also, I forgot to ask: can you outline the problem this fixes? I'm > > curious about why this hasn't been an issue in the past. My guess is > > there's something new about your configuration, and the config and the > > symptoms might help connect this fix to similar problems. > > I already replied about this in the previous patch... > << In Hi1620 we have some integrated controllers that appear as PCIe EPs > under the same bus. Some of these controllers (e.g. the SATA > controller) are missing the err_handler callbacks. > > If one device reports a non-fatal uncorrectable error with the current > AER core code the callbacks for all the devices under the same bus will > be called and, if any of the devices is missing the callback all the > devices in the subtree are left in error state without recovery... > This patch is needed to sort out a situation like this one.>> > > Should I add this to the commit msg? Thanks for the reminder. I thought I remembered some details but hadn't dug them out again. Yes, I was hoping for something we could include in the commit message. I'm still not sure what specifically is *new* about this situation. Maybe the particular mix of functions in a multi-function device? Maybe the fact that you're seeing more AER errors than before (or maybe just doing more testing?) Since this is actually a bug fix, this might be a good opportunity to open a bugzilla for it. Then we have a place to attach the complete "lspci -vv" output, dmesg, etc., that are of interest but too much for the commit message. > > > > This patch implements this new behaviour for non fatal errors. > > > > > > > > Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> > > > > Signed-off-by: Dongdong Liu <liudongdong3@huawei.com> > > > > --- > > > > Changes from v1: > > > > - now errors are reported only to the fucntions that logged the > > error > > > > instead of all the functions in the same device. > > > > - the patch subject has changed to match the new implementation > > > > --- > > > > drivers/pci/pcie/aer/aerdrv_core.c | 9 ++++++++- > > > > 1 file changed, 8 insertions(+), 1 deletion(-) > > > > > > > > diff --git a/drivers/pci/pcie/aer/aerdrv_core.c > > b/drivers/pci/pcie/aer/aerdrv_core.c > > > > index b1303b3..057465ad 100644 > > > > --- a/drivers/pci/pcie/aer/aerdrv_core.c > > > > +++ b/drivers/pci/pcie/aer/aerdrv_core.c > > > > @@ -390,7 +390,14 @@ static pci_ers_result_t > > broadcast_error_message(struct pci_dev *dev, > > > > * If the error is reported by an end point, we think this > > > > * error is related to the upstream link of the end point. > > > > */ > > > > - pci_walk_bus(dev->bus, cb, &result_data); > > > > + if (state == pci_channel_io_normal) > > > > + /* > > > > + * the error is non fatal so the bus is ok, just > > invoke > > > > + * the callback for the function that logged the > > error. > > > > + */ > > > > + cb(dev, &result_data); > > > > + else > > > > + pci_walk_bus(dev->bus, cb, &result_data); > > > > > > I think the concept of this change makes sense, but I don't like the > > > implicit connection of PCI_ERR_ROOT_UNCOR_RCV -> AER_NONFATAL -> > > > pci_channel_io_normal. That makes it harder than it should be to > > read > > > the code. > > > > > > What would you think of changing the signature of do_recovery() and > > > broadcast_error_message() so they take the struct aer_err_info > > pointer > > > instead of just the severity and pci_channel_state? Then we could > > > check directly for AER_NONFATAL here. > > I think the main issue of this approach is > aer_recover_work_func()->do_recovery() > If we modify the signature of do_recovery() we also need to modify > struct aer_recover_entry to embed aer_err_info sub struct (and anyway > so far there is no hook to aer_err_info in ghes.c...so it seems to > me like unfeasible...) > > I think we can either add a severity field to broadcast_error_message() > or move > > enum pci_channel_state state; > > if (severity == AER_FATAL) > state = pci_channel_io_frozen; > else > state = pci_channel_io_normal; > > inside broadcast_error_message() > > In both cases we make the code more readable but we add redundancy... > Thoughts? Hmmm, it's not as simple to solve as I hoped. The "native" Linux AER driver reads registers directly from the AER capability, produces logs, and does some recovery. From 100 miles away, APEI is basically a way for the platform (i.e., firmware or manageability software) to insert itself in the middle: *it* reads the AER registers, does whatever it wants to do (e.g., OS-independent logging), and then passes a copy of the AER capability (and the PCIe capability for good measure) on to the OS via APEI. The Linux APEI code then stuffs that AER info into the native Linux AER path where we do our own recovery. So we basically have two entry points to the Linux AER code: (1) the get_device_error_info() path that reads the AER registers directly, and (2) the APEI path that gets the AER register info from the firmware. In my mind, these paths ought to be far more unified than they are. The transition from APEI to the native Linux AER code throws away almost all the information we got from the platform: aer_recover_work_func() in the APEI path gets a copy of the AER capability, but all it passes to do_recovery() in the native AER code is "severity" -- a single int. I think we should revamp the native AER code so it collects the AER register info a little higher up, maybe in aer_isr_one_error() (it's kind of stupid that aer_process_err_devices() currently reads the AER registers *twice*). Then we could make the APEI code copy the information we care about from the CPER into a struct aer_err_info, then stuff it into aer_process_err_devices(). That would have the nice side-effect of using exactly the same logging code for both paths (currently the APEI path uses cper_print_aer(), while the native path uses aer_print_error()). This is a lot of work. Bjorn
Hi Bjorn > -----Original Message----- > From: Bjorn Helgaas [mailto:helgaas@kernel.org] > Sent: 02 September 2017 18:33 > To: Gabriele Paoloni > Cc: Linuxarm; liudongdong (C); linux-pci@vger.kernel.org; linux- > kernel@vger.kernel.org > Subject: Re: [PATCH v2] PCIe AER: report uncorrectable errors only to > the functions that logged the errors > > On Fri, Sep 01, 2017 at 11:39:35AM +0000, Gabriele Paoloni wrote: > > Hi Bjorn > > > > Many thanks for looking at this > > > > > -----Original Message----- > > > From: Bjorn Helgaas [mailto:helgaas@kernel.org] > > > Sent: 01 September 2017 05:43 > > > To: Gabriele Paoloni > > > Cc: Linuxarm; liudongdong (C); linux-pci@vger.kernel.org; linux- > > > kernel@vger.kernel.org > > > Subject: Re: [PATCH v2] PCIe AER: report uncorrectable errors only > to > > > the functions that logged the errors > > > > > > On Thu, Aug 31, 2017 at 03:03:44PM -0500, Bjorn Helgaas wrote: > > > > On Fri, Aug 18, 2017 at 12:02:21PM +0100, Gabriele Paoloni wrote: > > > > > Currently if an uncorrectable error is reported by an EP the > AER > > > > > driver walks over all the devices connected to the upstream > port > > > > > bus and in turns call the report_error_detected() callback. > > > > > If any of the devices connected to the bus does not implement > > > > > dev->driver->err_handler->error_detected() do_recovery() will > fail > > > > > leaving all the bus hierarchy devices unrecovered. > > > > > > > > > > However for non fatal errors the PCIe link should not be > considered > > > > > compromised, therefore it makes sense to report the error only > to > > > > > all the functions that logged an error. > > > > > > > > Can you include a pointer to the relevant part of the spec here? > > > > Sure > > According to section "6.2.2.2.2. Non-Fatal Errors" > > << Non-fatal errors are uncorrectable errors which cause a particular > > transaction to be unreliable but the Link is otherwise fully > functional. > > Isolating Non-fatal from Fatal errors provides Requester/Receiver > logic > > in a device or system management software the opportunity to recover > > from the error without resetting the components on the Link and > > disturbing other transactions in progress. Devices not associated > with > > the transaction in error are not impacted by the error.>> > > > > I will add it to the commit msg: > > > > > > > > Also, I forgot to ask: can you outline the problem this fixes? I'm > > > curious about why this hasn't been an issue in the past. My guess > is > > > there's something new about your configuration, and the config and > the > > > symptoms might help connect this fix to similar problems. > > > > I already replied about this in the previous patch... > > << In Hi1620 we have some integrated controllers that appear as PCIe > EPs > > under the same bus. Some of these controllers (e.g. the SATA > > controller) are missing the err_handler callbacks. > > > > If one device reports a non-fatal uncorrectable error with the > current > > AER core code the callbacks for all the devices under the same bus > will > > be called and, if any of the devices is missing the callback all the > > devices in the subtree are left in error state without recovery... > > This patch is needed to sort out a situation like this one.>> > > > > Should I add this to the commit msg? > > Thanks for the reminder. I thought I remembered some details but > hadn't dug them out again. Yes, I was hoping for something we could > include in the commit message. I'm still not sure what specifically > is *new* about this situation. Maybe the particular mix of functions > in a multi-function device? Maybe the fact that you're seeing more > AER errors than before (or maybe just doing more testing?) Hi Bjorn as I said here we have some integrated controllers that appear as PCIe EPs under the same bus. Usually PCIe is p2p (no more that 1 device per bus), but in our SoC we have different devices under the same bus (not MF devices): RC---bus0---|-SAS ctrl | |-SATA ctrl | |-XGE ctrl Since this is unusual this is maybe the reason why this has not been seen yet elsewhere... > > Since this is actually a bug fix, this might be a good opportunity to > open a bugzilla for it. Then we have a place to attach the complete > "lspci -vv" output, dmesg, etc., that are of interest but too much for > the commit message. Sure we can do this and add the bugzilla link in the commit msg > > > > > > This patch implements this new behaviour for non fatal errors. > > > > > > > > > > Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> > > > > > Signed-off-by: Dongdong Liu <liudongdong3@huawei.com> > > > > > --- > > > > > Changes from v1: > > > > > - now errors are reported only to the fucntions that logged > the > > > error > > > > > instead of all the functions in the same device. > > > > > - the patch subject has changed to match the new > implementation > > > > > --- > > > > > drivers/pci/pcie/aer/aerdrv_core.c | 9 ++++++++- > > > > > 1 file changed, 8 insertions(+), 1 deletion(-) > > > > > > > > > > diff --git a/drivers/pci/pcie/aer/aerdrv_core.c > > > b/drivers/pci/pcie/aer/aerdrv_core.c > > > > > index b1303b3..057465ad 100644 > > > > > --- a/drivers/pci/pcie/aer/aerdrv_core.c > > > > > +++ b/drivers/pci/pcie/aer/aerdrv_core.c > > > > > @@ -390,7 +390,14 @@ static pci_ers_result_t > > > broadcast_error_message(struct pci_dev *dev, > > > > > * If the error is reported by an end point, we think > this > > > > > * error is related to the upstream link of the end > point. > > > > > */ > > > > > - pci_walk_bus(dev->bus, cb, &result_data); > > > > > + if (state == pci_channel_io_normal) > > > > > + /* > > > > > + * the error is non fatal so the bus is ok, > just > > > invoke > > > > > + * the callback for the function that logged > the > > > error. > > > > > + */ > > > > > + cb(dev, &result_data); > > > > > + else > > > > > + pci_walk_bus(dev->bus, cb, &result_data); > > > > > > > > I think the concept of this change makes sense, but I don't like > the > > > > implicit connection of PCI_ERR_ROOT_UNCOR_RCV -> AER_NONFATAL -> > > > > pci_channel_io_normal. That makes it harder than it should be to > > > read > > > > the code. > > > > > > > > What would you think of changing the signature of do_recovery() > and > > > > broadcast_error_message() so they take the struct aer_err_info > > > pointer > > > > instead of just the severity and pci_channel_state? Then we > could > > > > check directly for AER_NONFATAL here. > > > > I think the main issue of this approach is > > aer_recover_work_func()->do_recovery() > > If we modify the signature of do_recovery() we also need to modify > > struct aer_recover_entry to embed aer_err_info sub struct (and anyway > > so far there is no hook to aer_err_info in ghes.c...so it seems to > > me like unfeasible...) > > > > I think we can either add a severity field to > broadcast_error_message() > > or move > > > > enum pci_channel_state state; > > > > if (severity == AER_FATAL) > > state = pci_channel_io_frozen; > > else > > state = pci_channel_io_normal; > > > > inside broadcast_error_message() > > > > In both cases we make the code more readable but we add redundancy... > > Thoughts? > > Hmmm, it's not as simple to solve as I hoped. > > The "native" Linux AER driver reads registers directly from the AER > capability, produces logs, and does some recovery. > > From 100 miles away, APEI is basically a way for the platform (i.e., > firmware or manageability software) to insert itself in the middle: > *it* reads the AER registers, does whatever it wants to do (e.g., > OS-independent logging), and then passes a copy of the AER capability > (and the PCIe capability for good measure) on to the OS via APEI. > > The Linux APEI code then stuffs that AER info into the native Linux > AER path where we do our own recovery. > > So we basically have two entry points to the Linux AER code: (1) the > get_device_error_info() path that reads the AER registers directly, > and (2) the APEI path that gets the AER register info from the > firmware. > > In my mind, these paths ought to be far more unified than they are. > The transition from APEI to the native Linux AER code throws away > almost all the information we got from the platform: > aer_recover_work_func() in the APEI path gets a copy of the AER > capability, but all it passes to do_recovery() in the native AER code > is "severity" -- a single int. > > I think we should revamp the native AER code so it collects the AER > register info a little higher up, maybe in aer_isr_one_error() (it's > kind of stupid that aer_process_err_devices() currently reads the AER > registers *twice*). > > Then we could make the APEI code copy the information we care about > from the CPER into a struct aer_err_info, then stuff it into > aer_process_err_devices(). That would have the nice side-effect of > using exactly the same logging code for both paths (currently the APEI > path uses cper_print_aer(), while the native path uses > aer_print_error()). > > This is a lot of work. I agree (on what to do and, unfortunately, on a lot of work :) ). However given that this patch fixes a bug I would ask if we can first accept this patch first and then proceed with the rework...what do you think? Thanks Gab > > Bjorn
On Wed, Sep 06, 2017 at 10:56:42AM +0000, Gabriele Paoloni wrote: > Hi Bjorn > > > -----Original Message----- > > From: Bjorn Helgaas [mailto:helgaas@kernel.org] > > Sent: 02 September 2017 18:33 > > To: Gabriele Paoloni > > Cc: Linuxarm; liudongdong (C); linux-pci@vger.kernel.org; linux- > > kernel@vger.kernel.org > > Subject: Re: [PATCH v2] PCIe AER: report uncorrectable errors only to > > the functions that logged the errors > > > > On Fri, Sep 01, 2017 at 11:39:35AM +0000, Gabriele Paoloni wrote: > > > Hi Bjorn > > > > > > Many thanks for looking at this > > > > > > > -----Original Message----- > > > > From: Bjorn Helgaas [mailto:helgaas@kernel.org] > > > > Sent: 01 September 2017 05:43 > > > > To: Gabriele Paoloni > > > > Cc: Linuxarm; liudongdong (C); linux-pci@vger.kernel.org; linux- > > > > kernel@vger.kernel.org > > > > Subject: Re: [PATCH v2] PCIe AER: report uncorrectable errors only > > to > > > > the functions that logged the errors > > > > > > > > On Thu, Aug 31, 2017 at 03:03:44PM -0500, Bjorn Helgaas wrote: > > > > > On Fri, Aug 18, 2017 at 12:02:21PM +0100, Gabriele Paoloni wrote: > > > > > > Currently if an uncorrectable error is reported by an EP the > > AER > > > > > > driver walks over all the devices connected to the upstream > > port > > > > > > bus and in turns call the report_error_detected() callback. > > > > > > If any of the devices connected to the bus does not implement > > > > > > dev->driver->err_handler->error_detected() do_recovery() will > > fail > > > > > > leaving all the bus hierarchy devices unrecovered. > > > > > > > > > > > > However for non fatal errors the PCIe link should not be > > considered > > > > > > compromised, therefore it makes sense to report the error only > > to > > > > > > all the functions that logged an error. > > > > > > > > > > Can you include a pointer to the relevant part of the spec here? > > > > > > Sure > > > According to section "6.2.2.2.2. Non-Fatal Errors" > > > << Non-fatal errors are uncorrectable errors which cause a particular > > > transaction to be unreliable but the Link is otherwise fully > > functional. > > > Isolating Non-fatal from Fatal errors provides Requester/Receiver > > logic > > > in a device or system management software the opportunity to recover > > > from the error without resetting the components on the Link and > > > disturbing other transactions in progress. Devices not associated > > with > > > the transaction in error are not impacted by the error.>> > > > > > > I will add it to the commit msg: > > > > > > > > > > > Also, I forgot to ask: can you outline the problem this fixes? I'm > > > > curious about why this hasn't been an issue in the past. My guess > > is > > > > there's something new about your configuration, and the config and > > the > > > > symptoms might help connect this fix to similar problems. > > > > > > I already replied about this in the previous patch... > > > << In Hi1620 we have some integrated controllers that appear as PCIe > > EPs > > > under the same bus. Some of these controllers (e.g. the SATA > > > controller) are missing the err_handler callbacks. > > > > > > If one device reports a non-fatal uncorrectable error with the > > current > > > AER core code the callbacks for all the devices under the same bus > > will > > > be called and, if any of the devices is missing the callback all the > > > devices in the subtree are left in error state without recovery... > > > This patch is needed to sort out a situation like this one.>> > > > > > > Should I add this to the commit msg? > > > > Thanks for the reminder. I thought I remembered some details but > > hadn't dug them out again. Yes, I was hoping for something we could > > include in the commit message. I'm still not sure what specifically > > is *new* about this situation. Maybe the particular mix of functions > > in a multi-function device? Maybe the fact that you're seeing more > > AER errors than before (or maybe just doing more testing?) > > Hi Bjorn as I said here we have some integrated controllers that appear > as PCIe EPs under the same bus. Usually PCIe is p2p (no more that 1 > device per bus), but in our SoC we have different devices under the same > bus (not MF devices): > > RC---bus0---|-SAS ctrl > | > |-SATA ctrl > | > |-XGE ctrl > > Since this is unusual this is maybe the reason why this has not been > seen yet elsewhere... > > > > > Since this is actually a bug fix, this might be a good opportunity to > > open a bugzilla for it. Then we have a place to attach the complete > > "lspci -vv" output, dmesg, etc., that are of interest but too much for > > the commit message. > > Sure we can do this and add the bugzilla link in the commit msg > > > > > > > > > This patch implements this new behaviour for non fatal errors. > > > > > > > > > > > > Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> > > > > > > Signed-off-by: Dongdong Liu <liudongdong3@huawei.com> > > > > > > --- > > > > > > Changes from v1: > > > > > > - now errors are reported only to the fucntions that logged > > the > > > > error > > > > > > instead of all the functions in the same device. > > > > > > - the patch subject has changed to match the new > > implementation > > > > > > --- > > > > > > drivers/pci/pcie/aer/aerdrv_core.c | 9 ++++++++- > > > > > > 1 file changed, 8 insertions(+), 1 deletion(-) > > > > > > > > > > > > diff --git a/drivers/pci/pcie/aer/aerdrv_core.c > > > > b/drivers/pci/pcie/aer/aerdrv_core.c > > > > > > index b1303b3..057465ad 100644 > > > > > > --- a/drivers/pci/pcie/aer/aerdrv_core.c > > > > > > +++ b/drivers/pci/pcie/aer/aerdrv_core.c > > > > > > @@ -390,7 +390,14 @@ static pci_ers_result_t > > > > broadcast_error_message(struct pci_dev *dev, > > > > > > * If the error is reported by an end point, we think > > this > > > > > > * error is related to the upstream link of the end > > point. > > > > > > */ > > > > > > - pci_walk_bus(dev->bus, cb, &result_data); > > > > > > + if (state == pci_channel_io_normal) > > > > > > + /* > > > > > > + * the error is non fatal so the bus is ok, > > just > > > > invoke > > > > > > + * the callback for the function that logged > > the > > > > error. > > > > > > + */ > > > > > > + cb(dev, &result_data); > > > > > > + else > > > > > > + pci_walk_bus(dev->bus, cb, &result_data); > > > > > > > > > > I think the concept of this change makes sense, but I don't like > > the > > > > > implicit connection of PCI_ERR_ROOT_UNCOR_RCV -> AER_NONFATAL -> > > > > > pci_channel_io_normal. That makes it harder than it should be to > > > > read > > > > > the code. > > > > > > > > > > What would you think of changing the signature of do_recovery() > > and > > > > > broadcast_error_message() so they take the struct aer_err_info > > > > pointer > > > > > instead of just the severity and pci_channel_state? Then we > > could > > > > > check directly for AER_NONFATAL here. > > > > > > I think the main issue of this approach is > > > aer_recover_work_func()->do_recovery() > > > If we modify the signature of do_recovery() we also need to modify > > > struct aer_recover_entry to embed aer_err_info sub struct (and anyway > > > so far there is no hook to aer_err_info in ghes.c...so it seems to > > > me like unfeasible...) > > > > > > I think we can either add a severity field to > > broadcast_error_message() > > > or move > > > > > > enum pci_channel_state state; > > > > > > if (severity == AER_FATAL) > > > state = pci_channel_io_frozen; > > > else > > > state = pci_channel_io_normal; > > > > > > inside broadcast_error_message() > > > > > > In both cases we make the code more readable but we add redundancy... > > > Thoughts? > > > > Hmmm, it's not as simple to solve as I hoped. > > > > The "native" Linux AER driver reads registers directly from the AER > > capability, produces logs, and does some recovery. > > > > From 100 miles away, APEI is basically a way for the platform (i.e., > > firmware or manageability software) to insert itself in the middle: > > *it* reads the AER registers, does whatever it wants to do (e.g., > > OS-independent logging), and then passes a copy of the AER capability > > (and the PCIe capability for good measure) on to the OS via APEI. > > > > The Linux APEI code then stuffs that AER info into the native Linux > > AER path where we do our own recovery. > > > > So we basically have two entry points to the Linux AER code: (1) the > > get_device_error_info() path that reads the AER registers directly, > > and (2) the APEI path that gets the AER register info from the > > firmware. > > > > In my mind, these paths ought to be far more unified than they are. > > The transition from APEI to the native Linux AER code throws away > > almost all the information we got from the platform: > > aer_recover_work_func() in the APEI path gets a copy of the AER > > capability, but all it passes to do_recovery() in the native AER code > > is "severity" -- a single int. > > > > I think we should revamp the native AER code so it collects the AER > > register info a little higher up, maybe in aer_isr_one_error() (it's > > kind of stupid that aer_process_err_devices() currently reads the AER > > registers *twice*). > > > > Then we could make the APEI code copy the information we care about > > from the CPER into a struct aer_err_info, then stuff it into > > aer_process_err_devices(). That would have the nice side-effect of > > using exactly the same logging code for both paths (currently the APEI > > path uses cper_print_aer(), while the native path uses > > aer_print_error()). > > > > This is a lot of work. > > I agree (on what to do and, unfortunately, on a lot of work :) ). > However given that this patch fixes a bug I would ask if we can first > accept this patch first and then proceed with the rework...what do > you think? Yes, I think we can do that. Can you repost this with a revised changelog that references the bugzilla? Bjorn
Hi Bjorn > -----Original Message----- > From: Bjorn Helgaas [mailto:helgaas@kernel.org] > Sent: 25 September 2017 19:34 > To: Gabriele Paoloni > Cc: Linuxarm; liudongdong (C); linux-pci@vger.kernel.org; linux- > kernel@vger.kernel.org > Subject: Re: [PATCH v2] PCIe AER: report uncorrectable errors only to > the functions that logged the errors > > On Wed, Sep 06, 2017 at 10:56:42AM +0000, Gabriele Paoloni wrote: > > Hi Bjorn > > > > > -----Original Message----- > > > From: Bjorn Helgaas [mailto:helgaas@kernel.org] > > > Sent: 02 September 2017 18:33 > > > To: Gabriele Paoloni > > > Cc: Linuxarm; liudongdong (C); linux-pci@vger.kernel.org; linux- > > > kernel@vger.kernel.org > > > Subject: Re: [PATCH v2] PCIe AER: report uncorrectable errors only > to > > > the functions that logged the errors > > > > > > On Fri, Sep 01, 2017 at 11:39:35AM +0000, Gabriele Paoloni wrote: > > > > Hi Bjorn > > > > > > > > Many thanks for looking at this > > > > > > > > > -----Original Message----- > > > > > From: Bjorn Helgaas [mailto:helgaas@kernel.org] > > > > > Sent: 01 September 2017 05:43 > > > > > To: Gabriele Paoloni > > > > > Cc: Linuxarm; liudongdong (C); linux-pci@vger.kernel.org; > linux- > > > > > kernel@vger.kernel.org > > > > > Subject: Re: [PATCH v2] PCIe AER: report uncorrectable errors > only > > > to > > > > > the functions that logged the errors > > > > > > > > > > On Thu, Aug 31, 2017 at 03:03:44PM -0500, Bjorn Helgaas wrote: > > > > > > On Fri, Aug 18, 2017 at 12:02:21PM +0100, Gabriele Paoloni > wrote: > > > > > > > Currently if an uncorrectable error is reported by an EP > the > > > AER > > > > > > > driver walks over all the devices connected to the upstream > > > port > > > > > > > bus and in turns call the report_error_detected() callback. > > > > > > > If any of the devices connected to the bus does not > implement > > > > > > > dev->driver->err_handler->error_detected() do_recovery() > will > > > fail > > > > > > > leaving all the bus hierarchy devices unrecovered. > > > > > > > > > > > > > > However for non fatal errors the PCIe link should not be > > > considered > > > > > > > compromised, therefore it makes sense to report the error > only > > > to > > > > > > > all the functions that logged an error. > > > > > > > > > > > > Can you include a pointer to the relevant part of the spec > here? > > > > > > > > Sure > > > > According to section "6.2.2.2.2. Non-Fatal Errors" > > > > << Non-fatal errors are uncorrectable errors which cause a > particular > > > > transaction to be unreliable but the Link is otherwise fully > > > functional. > > > > Isolating Non-fatal from Fatal errors provides Requester/Receiver > > > logic > > > > in a device or system management software the opportunity to > recover > > > > from the error without resetting the components on the Link and > > > > disturbing other transactions in progress. Devices not associated > > > with > > > > the transaction in error are not impacted by the error.>> > > > > > > > > I will add it to the commit msg: > > > > > > > > > > > > > > Also, I forgot to ask: can you outline the problem this fixes? > I'm > > > > > curious about why this hasn't been an issue in the past. My > guess > > > is > > > > > there's something new about your configuration, and the config > and > > > the > > > > > symptoms might help connect this fix to similar problems. > > > > > > > > I already replied about this in the previous patch... > > > > << In Hi1620 we have some integrated controllers that appear as > PCIe > > > EPs > > > > under the same bus. Some of these controllers (e.g. the SATA > > > > controller) are missing the err_handler callbacks. > > > > > > > > If one device reports a non-fatal uncorrectable error with the > > > current > > > > AER core code the callbacks for all the devices under the same > bus > > > will > > > > be called and, if any of the devices is missing the callback all > the > > > > devices in the subtree are left in error state without > recovery... > > > > This patch is needed to sort out a situation like this one.>> > > > > > > > > Should I add this to the commit msg? > > > > > > Thanks for the reminder. I thought I remembered some details but > > > hadn't dug them out again. Yes, I was hoping for something we > could > > > include in the commit message. I'm still not sure what > specifically > > > is *new* about this situation. Maybe the particular mix of > functions > > > in a multi-function device? Maybe the fact that you're seeing more > > > AER errors than before (or maybe just doing more testing?) > > > > Hi Bjorn as I said here we have some integrated controllers that > appear > > as PCIe EPs under the same bus. Usually PCIe is p2p (no more that 1 > > device per bus), but in our SoC we have different devices under the > same > > bus (not MF devices): > > > > RC---bus0---|-SAS ctrl > > | > > |-SATA ctrl > > | > > |-XGE ctrl > > > > Since this is unusual this is maybe the reason why this has not been > > seen yet elsewhere... > > > > > > > > Since this is actually a bug fix, this might be a good opportunity > to > > > open a bugzilla for it. Then we have a place to attach the > complete > > > "lspci -vv" output, dmesg, etc., that are of interest but too much > for > > > the commit message. > > > > Sure we can do this and add the bugzilla link in the commit msg > > > > > > > > > > > > This patch implements this new behaviour for non fatal > errors. > > > > > > > > > > > > > > Signed-off-by: Gabriele Paoloni > <gabriele.paoloni@huawei.com> > > > > > > > Signed-off-by: Dongdong Liu <liudongdong3@huawei.com> > > > > > > > --- > > > > > > > Changes from v1: > > > > > > > - now errors are reported only to the fucntions that > logged > > > the > > > > > error > > > > > > > instead of all the functions in the same device. > > > > > > > - the patch subject has changed to match the new > > > implementation > > > > > > > --- > > > > > > > drivers/pci/pcie/aer/aerdrv_core.c | 9 ++++++++- > > > > > > > 1 file changed, 8 insertions(+), 1 deletion(-) > > > > > > > > > > > > > > diff --git a/drivers/pci/pcie/aer/aerdrv_core.c > > > > > b/drivers/pci/pcie/aer/aerdrv_core.c > > > > > > > index b1303b3..057465ad 100644 > > > > > > > --- a/drivers/pci/pcie/aer/aerdrv_core.c > > > > > > > +++ b/drivers/pci/pcie/aer/aerdrv_core.c > > > > > > > @@ -390,7 +390,14 @@ static pci_ers_result_t > > > > > broadcast_error_message(struct pci_dev *dev, > > > > > > > * If the error is reported by an end point, we > think > > > this > > > > > > > * error is related to the upstream link of the > end > > > point. > > > > > > > */ > > > > > > > - pci_walk_bus(dev->bus, cb, &result_data); > > > > > > > + if (state == pci_channel_io_normal) > > > > > > > + /* > > > > > > > + * the error is non fatal so the bus is > ok, > > > just > > > > > invoke > > > > > > > + * the callback for the function that > logged > > > the > > > > > error. > > > > > > > + */ > > > > > > > + cb(dev, &result_data); > > > > > > > + else > > > > > > > + pci_walk_bus(dev->bus, cb, &result_data); > > > > > > > > > > > > I think the concept of this change makes sense, but I don't > like > > > the > > > > > > implicit connection of PCI_ERR_ROOT_UNCOR_RCV -> AER_NONFATAL > -> > > > > > > pci_channel_io_normal. That makes it harder than it should > be to > > > > > read > > > > > > the code. > > > > > > > > > > > > What would you think of changing the signature of > do_recovery() > > > and > > > > > > broadcast_error_message() so they take the struct > aer_err_info > > > > > pointer > > > > > > instead of just the severity and pci_channel_state? Then we > > > could > > > > > > check directly for AER_NONFATAL here. > > > > > > > > I think the main issue of this approach is > > > > aer_recover_work_func()->do_recovery() > > > > If we modify the signature of do_recovery() we also need to > modify > > > > struct aer_recover_entry to embed aer_err_info sub struct (and > anyway > > > > so far there is no hook to aer_err_info in ghes.c...so it seems > to > > > > me like unfeasible...) > > > > > > > > I think we can either add a severity field to > > > broadcast_error_message() > > > > or move > > > > > > > > enum pci_channel_state state; > > > > > > > > if (severity == AER_FATAL) > > > > state = pci_channel_io_frozen; > > > > else > > > > state = pci_channel_io_normal; > > > > > > > > inside broadcast_error_message() > > > > > > > > In both cases we make the code more readable but we add > redundancy... > > > > Thoughts? > > > > > > Hmmm, it's not as simple to solve as I hoped. > > > > > > The "native" Linux AER driver reads registers directly from the AER > > > capability, produces logs, and does some recovery. > > > > > > From 100 miles away, APEI is basically a way for the platform > (i.e., > > > firmware or manageability software) to insert itself in the middle: > > > *it* reads the AER registers, does whatever it wants to do (e.g., > > > OS-independent logging), and then passes a copy of the AER > capability > > > (and the PCIe capability for good measure) on to the OS via APEI. > > > > > > The Linux APEI code then stuffs that AER info into the native Linux > > > AER path where we do our own recovery. > > > > > > So we basically have two entry points to the Linux AER code: (1) > the > > > get_device_error_info() path that reads the AER registers directly, > > > and (2) the APEI path that gets the AER register info from the > > > firmware. > > > > > > In my mind, these paths ought to be far more unified than they are. > > > The transition from APEI to the native Linux AER code throws away > > > almost all the information we got from the platform: > > > aer_recover_work_func() in the APEI path gets a copy of the AER > > > capability, but all it passes to do_recovery() in the native AER > code > > > is "severity" -- a single int. > > > > > > I think we should revamp the native AER code so it collects the AER > > > register info a little higher up, maybe in aer_isr_one_error() > (it's > > > kind of stupid that aer_process_err_devices() currently reads the > AER > > > registers *twice*). > > > > > > Then we could make the APEI code copy the information we care about > > > from the CPER into a struct aer_err_info, then stuff it into > > > aer_process_err_devices(). That would have the nice side-effect of > > > using exactly the same logging code for both paths (currently the > APEI > > > path uses cper_print_aer(), while the native path uses > > > aer_print_error()). > > > > > > This is a lot of work. > > > > I agree (on what to do and, unfortunately, on a lot of work :) ). > > However given that this patch fixes a bug I would ask if we can first > > accept this patch first and then proceed with the rework...what do > > you think? > > Yes, I think we can do that. Can you repost this with a revised > changelog that references the bugzilla? Sure I have just opened https://bugzilla.kernel.org/show_bug.cgi?id=197055 I will respin tomorrow Thanks Gab > > Bjorn
diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index b1303b3..057465ad 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -390,7 +390,14 @@ static pci_ers_result_t broadcast_error_message(struct pci_dev *dev, * If the error is reported by an end point, we think this * error is related to the upstream link of the end point. */ - pci_walk_bus(dev->bus, cb, &result_data); + if (state == pci_channel_io_normal) + /* + * the error is non fatal so the bus is ok, just invoke + * the callback for the function that logged the error. + */ + cb(dev, &result_data); + else + pci_walk_bus(dev->bus, cb, &result_data); } return result_data.result;