Message ID | 1522753815-28718-2-git-send-email-hemant.agrawal@nxp.com |
---|---|
State | Superseded |
Headers | show |
Series | [v4,1/2] doc: add vfio api support | expand |
03/04/2018 13:10, Hemant Agrawal: > --- a/lib/librte_eal/rte_eal_version.map > +++ b/lib/librte_eal/rte_eal_version.map > @@ -255,5 +255,8 @@ EXPERIMENTAL { > rte_service_set_runstate_mapped_check; > rte_service_set_stats_enable; > rte_service_start_with_defaults; > + rte_vfio_get_group_num; > + rte_vfio_get_container_fd; > + rte_vfio_get_group_fd; The alphabetical order is messed. I can fix it on apply.
On 4/3/2018 5:54 PM, Thomas Monjalon wrote: > 03/04/2018 13:10, Hemant Agrawal: >> --- a/lib/librte_eal/rte_eal_version.map >> +++ b/lib/librte_eal/rte_eal_version.map >> @@ -255,5 +255,8 @@ EXPERIMENTAL { >> rte_service_set_runstate_mapped_check; >> rte_service_set_stats_enable; >> rte_service_start_with_defaults; >> + rte_vfio_get_group_num; >> + rte_vfio_get_container_fd; >> + rte_vfio_get_group_fd; > > The alphabetical order is messed. > I can fix it on apply. > > Thanks!
Hi Hemant, > -----Original Message----- > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Hemant Agrawal > Sent: Tuesday, April 3, 2018 7:10 PM > To: dev@dpdk.org > Cc: Burakov, Anatoly <anatoly.burakov@intel.com>; thomas@monjalon.net > Subject: [dpdk-dev] [PATCH v4 2/2] eal/vfio: export internal vfio functions > > This patch moves some of the internal vfio functions from > eal_vfio.h to rte_vfio.h for common uses with "rte_" prefix. > > This patch also change the FSLMC bus usages from the internal > VFIO functions to external ones with "rte_" prefix > > Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com> > Acked-by: Anatoly Burakov <anatoly.burakov@intel.com> > --- > drivers/bus/fslmc/Makefile | 1 - > drivers/bus/fslmc/fslmc_vfio.c | 7 +-- > drivers/bus/fslmc/fslmc_vfio.h | 2 - > drivers/bus/fslmc/meson.build | 1 - > lib/librte_eal/bsdapp/eal/eal.c | 20 +++++++ > lib/librte_eal/common/include/rte_vfio.h | 75 > +++++++++++++++++++++++++- > lib/librte_eal/linuxapp/eal/eal_vfio.c | 38 ++++++------- > lib/librte_eal/linuxapp/eal/eal_vfio.h | 21 -------- > lib/librte_eal/linuxapp/eal/eal_vfio_mp_sync.c | 4 +- > lib/librte_eal/rte_eal_version.map | 3 ++ > 10 files changed, 122 insertions(+), 50 deletions(-) > > diff --git a/drivers/bus/fslmc/Makefile b/drivers/bus/fslmc/Makefile > index 93870ba..3aa34e2 100644 > --- a/drivers/bus/fslmc/Makefile > +++ b/drivers/bus/fslmc/Makefile > @@ -16,7 +16,6 @@ CFLAGS += $(WERROR_FLAGS) > CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc > CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc/mc > CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc/qbman/include > -CFLAGS += -I$(RTE_SDK)/lib/librte_eal/linuxapp/eal > CFLAGS += -I$(RTE_SDK)/lib/librte_eal/common > LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring > LDLIBS += -lrte_ethdev > diff --git a/drivers/bus/fslmc/fslmc_vfio.c b/drivers/bus/fslmc/fslmc_vfio.c > index 62499de..f3b2960 100644 > --- a/drivers/bus/fslmc/fslmc_vfio.c > +++ b/drivers/bus/fslmc/fslmc_vfio.c > @@ -91,7 +91,8 @@ fslmc_get_container_group(int *groupid) > } > > /* get group number */ > - ret = vfio_get_group_no(SYSFS_FSL_MC_DEVICES, g_container, > groupid); > + ret = rte_vfio_get_group_num(SYSFS_FSL_MC_DEVICES, > + g_container, groupid); > if (ret <= 0) { > DPAA2_BUS_ERR("Unable to find %s IOMMU group", > g_container); > return -1; > @@ -124,7 +125,7 @@ vfio_connect_container(void) > } > > /* Opens main vfio file descriptor which represents the "container" */ > - fd = vfio_get_container_fd(); > + fd = rte_vfio_get_container_fd(); > if (fd < 0) { > DPAA2_BUS_ERR("Failed to open VFIO container"); > return -errno; > @@ -620,7 +621,7 @@ fslmc_vfio_setup_group(void) > } > > /* Get the actual group fd */ > - ret = vfio_get_group_fd(groupid); > + ret = rte_vfio_get_group_fd(groupid); > if (ret < 0) > return ret; > vfio_group.fd = ret; > diff --git a/drivers/bus/fslmc/fslmc_vfio.h b/drivers/bus/fslmc/fslmc_vfio.h > index e8fb344..9e2c4fe 100644 > --- a/drivers/bus/fslmc/fslmc_vfio.h > +++ b/drivers/bus/fslmc/fslmc_vfio.h > @@ -10,8 +10,6 @@ > > #include <rte_vfio.h> > > -#include "eal_vfio.h" > - > #define DPAA2_MC_DPNI_DEVID 7 > #define DPAA2_MC_DPSECI_DEVID 3 > #define DPAA2_MC_DPCON_DEVID 5 > diff --git a/drivers/bus/fslmc/meson.build b/drivers/bus/fslmc/meson.build > index e94340e..78f9d92 100644 > --- a/drivers/bus/fslmc/meson.build > +++ b/drivers/bus/fslmc/meson.build > @@ -22,6 +22,5 @@ sources = files('fslmc_bus.c', > > allow_experimental_apis = true > > -includes += include_directories('../../../lib/librte_eal/linuxapp/eal') > includes += include_directories('mc', 'qbman/include', 'portal') > cflags += ['-D_GNU_SOURCE'] > diff --git a/lib/librte_eal/bsdapp/eal/eal.c b/lib/librte_eal/bsdapp/eal/eal.c > index 4eafcb5..ac23db5 100644 > --- a/lib/librte_eal/bsdapp/eal/eal.c > +++ b/lib/librte_eal/bsdapp/eal/eal.c > @@ -781,3 +781,23 @@ int rte_vfio_clear_group(__rte_unused int > vfio_group_fd) > { > return 0; > } > + > +int __rte_experimental > +rte_vfio_get_group_num(__rte_unused const char *sysfs_base, > + __rte_unused const char *dev_addr, > + __rte_unused int *iommu_group_num) > +{ > + return -1; > +} > + > +int __rte_experimental > +rte_vfio_get_container_fd(void) > +{ > + return -1; > +} > + > +int __rte_experimental > +rte_vfio_get_group_fd(__rte_unused int iommu_group_num) > +{ > + return -1; > +} No function declarations for the above 3 global API. I guess compile will fail in BSD. You may include the rte_vfio.h in this file, and remove the dummy prototype. My previous patch "eal/vfio: add support for multiple container" does this too. BRs, Xiao
> Hi Hemant, > > > -----Original Message----- > > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Hemant Agrawal > > Sent: Tuesday, April 3, 2018 7:10 PM > > To: dev@dpdk.org > > Cc: Burakov, Anatoly <anatoly.burakov@intel.com>; thomas@monjalon.net > > Subject: [dpdk-dev] [PATCH v4 2/2] eal/vfio: export internal vfio > > functions > > > > This patch moves some of the internal vfio functions from eal_vfio.h > > to rte_vfio.h for common uses with "rte_" prefix. > > > > This patch also change the FSLMC bus usages from the internal VFIO > > functions to external ones with "rte_" prefix > > > > Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com> > > Acked-by: Anatoly Burakov <anatoly.burakov@intel.com> > > --- > > drivers/bus/fslmc/Makefile | 1 - > > drivers/bus/fslmc/fslmc_vfio.c | 7 +-- > > drivers/bus/fslmc/fslmc_vfio.h | 2 - > > drivers/bus/fslmc/meson.build | 1 - > > lib/librte_eal/bsdapp/eal/eal.c | 20 +++++++ > > lib/librte_eal/common/include/rte_vfio.h | 75 > > +++++++++++++++++++++++++- > > lib/librte_eal/linuxapp/eal/eal_vfio.c | 38 ++++++------- > > lib/librte_eal/linuxapp/eal/eal_vfio.h | 21 -------- > > lib/librte_eal/linuxapp/eal/eal_vfio_mp_sync.c | 4 +- > > lib/librte_eal/rte_eal_version.map | 3 ++ > > 10 files changed, 122 insertions(+), 50 deletions(-) > > > > diff --git a/drivers/bus/fslmc/Makefile b/drivers/bus/fslmc/Makefile > > index 93870ba..3aa34e2 100644 > > --- a/drivers/bus/fslmc/Makefile > > +++ b/drivers/bus/fslmc/Makefile > > @@ -16,7 +16,6 @@ CFLAGS += $(WERROR_FLAGS) CFLAGS += > > -I$(RTE_SDK)/drivers/bus/fslmc CFLAGS += > > -I$(RTE_SDK)/drivers/bus/fslmc/mc CFLAGS += > > -I$(RTE_SDK)/drivers/bus/fslmc/qbman/include > > -CFLAGS += -I$(RTE_SDK)/lib/librte_eal/linuxapp/eal > > CFLAGS += -I$(RTE_SDK)/lib/librte_eal/common > > LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring LDLIBS += > > -lrte_ethdev diff --git a/drivers/bus/fslmc/fslmc_vfio.c > > b/drivers/bus/fslmc/fslmc_vfio.c index 62499de..f3b2960 100644 > > --- a/drivers/bus/fslmc/fslmc_vfio.c > > +++ b/drivers/bus/fslmc/fslmc_vfio.c > > @@ -91,7 +91,8 @@ fslmc_get_container_group(int *groupid) > > } > > > > /* get group number */ > > - ret = vfio_get_group_no(SYSFS_FSL_MC_DEVICES, g_container, > > groupid); > > + ret = rte_vfio_get_group_num(SYSFS_FSL_MC_DEVICES, > > + g_container, groupid); > > if (ret <= 0) { > > DPAA2_BUS_ERR("Unable to find %s IOMMU group", > g_container); > > return -1; > > @@ -124,7 +125,7 @@ vfio_connect_container(void) > > } > > > > /* Opens main vfio file descriptor which represents the "container" */ > > - fd = vfio_get_container_fd(); > > + fd = rte_vfio_get_container_fd(); > > if (fd < 0) { > > DPAA2_BUS_ERR("Failed to open VFIO container"); > > return -errno; > > @@ -620,7 +621,7 @@ fslmc_vfio_setup_group(void) > > } > > > > /* Get the actual group fd */ > > - ret = vfio_get_group_fd(groupid); > > + ret = rte_vfio_get_group_fd(groupid); > > if (ret < 0) > > return ret; > > vfio_group.fd = ret; > > diff --git a/drivers/bus/fslmc/fslmc_vfio.h > > b/drivers/bus/fslmc/fslmc_vfio.h index e8fb344..9e2c4fe 100644 > > --- a/drivers/bus/fslmc/fslmc_vfio.h > > +++ b/drivers/bus/fslmc/fslmc_vfio.h > > @@ -10,8 +10,6 @@ > > > > #include <rte_vfio.h> > > > > -#include "eal_vfio.h" > > - > > #define DPAA2_MC_DPNI_DEVID 7 > > #define DPAA2_MC_DPSECI_DEVID 3 > > #define DPAA2_MC_DPCON_DEVID 5 > > diff --git a/drivers/bus/fslmc/meson.build > > b/drivers/bus/fslmc/meson.build index e94340e..78f9d92 100644 > > --- a/drivers/bus/fslmc/meson.build > > +++ b/drivers/bus/fslmc/meson.build > > @@ -22,6 +22,5 @@ sources = files('fslmc_bus.c', > > > > allow_experimental_apis = true > > > > -includes += > > include_directories('../../../lib/librte_eal/linuxapp/eal') > > includes += include_directories('mc', 'qbman/include', 'portal') > > cflags += ['-D_GNU_SOURCE'] diff --git > > a/lib/librte_eal/bsdapp/eal/eal.c b/lib/librte_eal/bsdapp/eal/eal.c > > index 4eafcb5..ac23db5 100644 > > --- a/lib/librte_eal/bsdapp/eal/eal.c > > +++ b/lib/librte_eal/bsdapp/eal/eal.c > > @@ -781,3 +781,23 @@ int rte_vfio_clear_group(__rte_unused int > > vfio_group_fd) > > { > > return 0; > > } > > + > > +int __rte_experimental > > +rte_vfio_get_group_num(__rte_unused const char *sysfs_base, > > + __rte_unused const char *dev_addr, > > + __rte_unused int *iommu_group_num) { > > + return -1; > > +} > > + > > +int __rte_experimental > > +rte_vfio_get_container_fd(void) > > +{ > > + return -1; > > +} > > + > > +int __rte_experimental > > +rte_vfio_get_group_fd(__rte_unused int iommu_group_num) { > > + return -1; > > +} > > No function declarations for the above 3 global API. I guess compile will fail in > BSD. > You may include the rte_vfio.h in this file, and remove the dummy prototype. > My previous patch "eal/vfio: add support for multiple container" does this too. > [Hemant] Just saw it. Fixing it. > BRs, > Xiao
diff --git a/drivers/bus/fslmc/Makefile b/drivers/bus/fslmc/Makefile index 93870ba..3aa34e2 100644 --- a/drivers/bus/fslmc/Makefile +++ b/drivers/bus/fslmc/Makefile @@ -16,7 +16,6 @@ CFLAGS += $(WERROR_FLAGS) CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc/mc CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc/qbman/include -CFLAGS += -I$(RTE_SDK)/lib/librte_eal/linuxapp/eal CFLAGS += -I$(RTE_SDK)/lib/librte_eal/common LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring LDLIBS += -lrte_ethdev diff --git a/drivers/bus/fslmc/fslmc_vfio.c b/drivers/bus/fslmc/fslmc_vfio.c index 62499de..f3b2960 100644 --- a/drivers/bus/fslmc/fslmc_vfio.c +++ b/drivers/bus/fslmc/fslmc_vfio.c @@ -91,7 +91,8 @@ fslmc_get_container_group(int *groupid) } /* get group number */ - ret = vfio_get_group_no(SYSFS_FSL_MC_DEVICES, g_container, groupid); + ret = rte_vfio_get_group_num(SYSFS_FSL_MC_DEVICES, + g_container, groupid); if (ret <= 0) { DPAA2_BUS_ERR("Unable to find %s IOMMU group", g_container); return -1; @@ -124,7 +125,7 @@ vfio_connect_container(void) } /* Opens main vfio file descriptor which represents the "container" */ - fd = vfio_get_container_fd(); + fd = rte_vfio_get_container_fd(); if (fd < 0) { DPAA2_BUS_ERR("Failed to open VFIO container"); return -errno; @@ -620,7 +621,7 @@ fslmc_vfio_setup_group(void) } /* Get the actual group fd */ - ret = vfio_get_group_fd(groupid); + ret = rte_vfio_get_group_fd(groupid); if (ret < 0) return ret; vfio_group.fd = ret; diff --git a/drivers/bus/fslmc/fslmc_vfio.h b/drivers/bus/fslmc/fslmc_vfio.h index e8fb344..9e2c4fe 100644 --- a/drivers/bus/fslmc/fslmc_vfio.h +++ b/drivers/bus/fslmc/fslmc_vfio.h @@ -10,8 +10,6 @@ #include <rte_vfio.h> -#include "eal_vfio.h" - #define DPAA2_MC_DPNI_DEVID 7 #define DPAA2_MC_DPSECI_DEVID 3 #define DPAA2_MC_DPCON_DEVID 5 diff --git a/drivers/bus/fslmc/meson.build b/drivers/bus/fslmc/meson.build index e94340e..78f9d92 100644 --- a/drivers/bus/fslmc/meson.build +++ b/drivers/bus/fslmc/meson.build @@ -22,6 +22,5 @@ sources = files('fslmc_bus.c', allow_experimental_apis = true -includes += include_directories('../../../lib/librte_eal/linuxapp/eal') includes += include_directories('mc', 'qbman/include', 'portal') cflags += ['-D_GNU_SOURCE'] diff --git a/lib/librte_eal/bsdapp/eal/eal.c b/lib/librte_eal/bsdapp/eal/eal.c index 4eafcb5..ac23db5 100644 --- a/lib/librte_eal/bsdapp/eal/eal.c +++ b/lib/librte_eal/bsdapp/eal/eal.c @@ -781,3 +781,23 @@ int rte_vfio_clear_group(__rte_unused int vfio_group_fd) { return 0; } + +int __rte_experimental +rte_vfio_get_group_num(__rte_unused const char *sysfs_base, + __rte_unused const char *dev_addr, + __rte_unused int *iommu_group_num) +{ + return -1; +} + +int __rte_experimental +rte_vfio_get_container_fd(void) +{ + return -1; +} + +int __rte_experimental +rte_vfio_get_group_fd(__rte_unused int iommu_group_num) +{ + return -1; +} diff --git a/lib/librte_eal/common/include/rte_vfio.h b/lib/librte_eal/common/include/rte_vfio.h index 9b7b983..9369b42 100644 --- a/lib/librte_eal/common/include/rte_vfio.h +++ b/lib/librte_eal/common/include/rte_vfio.h @@ -37,6 +37,13 @@ extern "C" { #endif +/* NOIOMMU is defined from kernel version 4.5 onwards */ +#ifdef VFIO_NOIOMMU_IOMMU +#define RTE_VFIO_NOIOMMU VFIO_NOIOMMU_IOMMU +#else +#define RTE_VFIO_NOIOMMU 8 +#endif + /** * Setup vfio_cfg for the device identified by its address. * It discovers the configured I/O MMU groups or sets a new one for the device. @@ -128,10 +135,76 @@ int rte_vfio_is_enabled(const char *modname); */ int rte_vfio_noiommu_is_enabled(void); -/* remove group fd from internal VFIO group fd array */ +/** + * Remove group fd from internal VFIO group fd array/ + * + * This function is only relevant to linux and will return + * an error on BSD. + * + * @param vfio_group_fd + * VFIO Grouup FD. + * + * @return + * 0 on success. + * <0 on failure. + */ int rte_vfio_clear_group(int vfio_group_fd); +/** + * Parse IOMMU group number for a device + * + * This function is only relevant to linux and will return + * an error on BSD. + * + * @param sysfs_base + * sysfs path prefix. + * + * @param dev_addr + * device location. + * + * @param iommu_group_num + * iommu group number + * + * @return + * >0 on success + * 0 for non-existent group or VFIO + * <0 for errors + */ +int __rte_experimental +rte_vfio_get_group_num(const char *sysfs_base, + const char *dev_addr, + int *iommu_group_num); + +/** + * Open VFIO container fd or get an existing one + * + * This function is only relevant to linux and will return + * an error on BSD. + * + * @return + * > 0 container fd + * < 0 for errors + */ +int __rte_experimental +rte_vfio_get_container_fd(void); + +/** + * Open VFIO group fd or get an existing one + * + * This function is only relevant to linux and will return + * an error on BSD. + * + * @param iommu_group_num + * iommu group number + * + * @return + * > 0 group fd + * < 0 for errors + */ +int __rte_experimental +rte_vfio_get_group_fd(int iommu_group_num); + #ifdef __cplusplus } #endif diff --git a/lib/librte_eal/linuxapp/eal/eal_vfio.c b/lib/librte_eal/linuxapp/eal/eal_vfio.c index e44ae4d..9f75417 100644 --- a/lib/librte_eal/linuxapp/eal/eal_vfio.c +++ b/lib/librte_eal/linuxapp/eal/eal_vfio.c @@ -36,7 +36,7 @@ static const struct vfio_iommu_type iommu_types[] = { }; int -vfio_get_group_fd(int iommu_group_no) +rte_vfio_get_group_fd(int iommu_group_num) { int i; int vfio_group_fd; @@ -45,7 +45,7 @@ vfio_get_group_fd(int iommu_group_no) /* check if we already have the group descriptor open */ for (i = 0; i < VFIO_MAX_GROUPS; i++) - if (vfio_cfg.vfio_groups[i].group_no == iommu_group_no) + if (vfio_cfg.vfio_groups[i].group_no == iommu_group_num) return vfio_cfg.vfio_groups[i].fd; /* Lets see first if there is room for a new group */ @@ -70,7 +70,7 @@ vfio_get_group_fd(int iommu_group_no) if (internal_config.process_type == RTE_PROC_PRIMARY) { /* try regular group format */ snprintf(filename, sizeof(filename), - VFIO_GROUP_FMT, iommu_group_no); + VFIO_GROUP_FMT, iommu_group_num); vfio_group_fd = open(filename, O_RDWR); if (vfio_group_fd < 0) { /* if file not found, it's not an error */ @@ -82,7 +82,7 @@ vfio_get_group_fd(int iommu_group_no) /* special case: try no-IOMMU path as well */ snprintf(filename, sizeof(filename), - VFIO_NOIOMMU_GROUP_FMT, iommu_group_no); + VFIO_NOIOMMU_GROUP_FMT, iommu_group_num); vfio_group_fd = open(filename, O_RDWR); if (vfio_group_fd < 0) { if (errno != ENOENT) { @@ -95,7 +95,7 @@ vfio_get_group_fd(int iommu_group_no) /* noiommu group found */ } - cur_grp->group_no = iommu_group_no; + cur_grp->group_no = iommu_group_num; cur_grp->fd = vfio_group_fd; vfio_cfg.vfio_active_groups++; return vfio_group_fd; @@ -117,7 +117,7 @@ vfio_get_group_fd(int iommu_group_no) close(socket_fd); return -1; } - if (vfio_mp_sync_send_request(socket_fd, iommu_group_no) < 0) { + if (vfio_mp_sync_send_request(socket_fd, iommu_group_num) < 0) { RTE_LOG(ERR, EAL, " cannot send group number!\n"); close(socket_fd); return -1; @@ -132,7 +132,7 @@ vfio_get_group_fd(int iommu_group_no) /* if we got the fd, store it and return it */ if (vfio_group_fd > 0) { close(socket_fd); - cur_grp->group_no = iommu_group_no; + cur_grp->group_no = iommu_group_num; cur_grp->fd = vfio_group_fd; vfio_cfg.vfio_active_groups++; return vfio_group_fd; @@ -262,11 +262,11 @@ rte_vfio_setup_device(const char *sysfs_base, const char *dev_addr, .argsz = sizeof(group_status) }; int vfio_group_fd; - int iommu_group_no; + int iommu_group_num; int ret; /* get group number */ - ret = vfio_get_group_no(sysfs_base, dev_addr, &iommu_group_no); + ret = rte_vfio_get_group_num(sysfs_base, dev_addr, &iommu_group_num); if (ret == 0) { RTE_LOG(WARNING, EAL, " %s not managed by VFIO driver, skipping\n", dev_addr); @@ -278,7 +278,7 @@ rte_vfio_setup_device(const char *sysfs_base, const char *dev_addr, return -1; /* get the actual group fd */ - vfio_group_fd = vfio_get_group_fd(iommu_group_no); + vfio_group_fd = rte_vfio_get_group_fd(iommu_group_num); if (vfio_group_fd < 0) return -1; @@ -394,11 +394,11 @@ rte_vfio_release_device(const char *sysfs_base, const char *dev_addr, .argsz = sizeof(group_status) }; int vfio_group_fd; - int iommu_group_no; + int iommu_group_num; int ret; /* get group number */ - ret = vfio_get_group_no(sysfs_base, dev_addr, &iommu_group_no); + ret = rte_vfio_get_group_num(sysfs_base, dev_addr, &iommu_group_num); if (ret <= 0) { RTE_LOG(WARNING, EAL, " %s not managed by VFIO driver\n", dev_addr); @@ -407,9 +407,9 @@ rte_vfio_release_device(const char *sysfs_base, const char *dev_addr, } /* get the actual group fd */ - vfio_group_fd = vfio_get_group_fd(iommu_group_no); + vfio_group_fd = rte_vfio_get_group_fd(iommu_group_num); if (vfio_group_fd <= 0) { - RTE_LOG(INFO, EAL, "vfio_get_group_fd failed for %s\n", + RTE_LOG(INFO, EAL, "rte_vfio_get_group_fd failed for %s\n", dev_addr); return -1; } @@ -480,7 +480,7 @@ rte_vfio_enable(const char *modname) return 0; } - vfio_cfg.vfio_container_fd = vfio_get_container_fd(); + vfio_cfg.vfio_container_fd = rte_vfio_get_container_fd(); /* check if we have VFIO driver enabled */ if (vfio_cfg.vfio_container_fd != -1) { @@ -558,7 +558,7 @@ vfio_has_supported_extensions(int vfio_container_fd) } int -vfio_get_container_fd(void) +rte_vfio_get_container_fd(void) { int ret, vfio_container_fd; @@ -622,8 +622,8 @@ vfio_get_container_fd(void) } int -vfio_get_group_no(const char *sysfs_base, - const char *dev_addr, int *iommu_group_no) +rte_vfio_get_group_num(const char *sysfs_base, + const char *dev_addr, int *iommu_group_num) { char linkname[PATH_MAX]; char filename[PATH_MAX]; @@ -655,7 +655,7 @@ vfio_get_group_no(const char *sysfs_base, errno = 0; group_tok = tok[ret - 1]; end = group_tok; - *iommu_group_no = strtol(group_tok, &end, 10); + *iommu_group_num = strtol(group_tok, &end, 10); if ((end != group_tok && *end != '\0') || errno != 0) { RTE_LOG(ERR, EAL, " %s error parsing IOMMU number!\n", dev_addr); return -1; diff --git a/lib/librte_eal/linuxapp/eal/eal_vfio.h b/lib/librte_eal/linuxapp/eal/eal_vfio.h index 8059577..c72b76c 100644 --- a/lib/librte_eal/linuxapp/eal/eal_vfio.h +++ b/lib/librte_eal/linuxapp/eal/eal_vfio.h @@ -79,12 +79,6 @@ struct vfio_iommu_spapr_tce_info { #define RTE_VFIO_SPAPR VFIO_SPAPR_TCE_v2_IOMMU #endif -#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 5, 0) -#define RTE_VFIO_NOIOMMU 8 -#else -#define RTE_VFIO_NOIOMMU VFIO_NOIOMMU_IOMMU -#endif - #define VFIO_MAX_GROUPS RTE_MAX_VFIO_GROUPS /* @@ -133,21 +127,6 @@ vfio_set_iommu_type(int vfio_container_fd); int vfio_has_supported_extensions(int vfio_container_fd); -/* open container fd or get an existing one */ -int -vfio_get_container_fd(void); - -/* parse IOMMU group number for a device - * returns 1 on success, -1 for errors, 0 for non-existent group - */ -int -vfio_get_group_no(const char *sysfs_base, - const char *dev_addr, int *iommu_group_no); - -/* open group fd or get an existing one */ -int -vfio_get_group_fd(int iommu_group_no); - int vfio_mp_sync_setup(void); #define SOCKET_REQ_CONTAINER 0x100 diff --git a/lib/librte_eal/linuxapp/eal/eal_vfio_mp_sync.c b/lib/librte_eal/linuxapp/eal/eal_vfio_mp_sync.c index 7cc3c15..e19b571 100644 --- a/lib/librte_eal/linuxapp/eal/eal_vfio_mp_sync.c +++ b/lib/librte_eal/linuxapp/eal/eal_vfio_mp_sync.c @@ -267,7 +267,7 @@ vfio_mp_sync_thread(void __rte_unused * arg) switch (ret) { case SOCKET_REQ_CONTAINER: - fd = vfio_get_container_fd(); + fd = rte_vfio_get_container_fd(); if (fd < 0) vfio_mp_sync_send_request(conn_sock, SOCKET_ERR); else @@ -283,7 +283,7 @@ vfio_mp_sync_thread(void __rte_unused * arg) continue; } - fd = vfio_get_group_fd(vfio_data); + fd = rte_vfio_get_group_fd(vfio_data); if (fd < 0) vfio_mp_sync_send_request(conn_sock, SOCKET_ERR); diff --git a/lib/librte_eal/rte_eal_version.map b/lib/librte_eal/rte_eal_version.map index f331f54..f663b8b 100644 --- a/lib/librte_eal/rte_eal_version.map +++ b/lib/librte_eal/rte_eal_version.map @@ -255,5 +255,8 @@ EXPERIMENTAL { rte_service_set_runstate_mapped_check; rte_service_set_stats_enable; rte_service_start_with_defaults; + rte_vfio_get_group_num; + rte_vfio_get_container_fd; + rte_vfio_get_group_fd; } DPDK_18.02;