Message ID | 20180416110058.16952-1-ard.biesheuvel@linaro.org |
---|---|
State | New |
Headers | show |
Series | [edk2,edk2-platforms] Silicon/Socionext/SynQuacer: update PHY reference clock rate | expand |
Hi Ard, > Please confirm that the modification to ogma_config.h is correct. Thank you very much for your update. We confirmed and your modification is correct. Regards, Masahisa On 16 April 2018 at 20:00, Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote: > As reported by Kojima-san, the PHY reference clock value we use in our > ACPI and DT descriptions is out of sync with the hardware. Replace > 125 MHz with 250 MHz throughout. > > Cc: Masahisa Kojima <masahisa.kojima@linaro.org> > Contributed-under: TianoCore Contribution Agreement 1.1 > Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> > --- > Kojima-san, > > Please confirm that the modification to ogma_config.h is correct. > > Thanks, > Ard. > > Silicon/Socionext/SynQuacer/AcpiTables/Dsdt.asl | 2 +- > Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi | 4 ++-- > Silicon/Socionext/SynQuacer/Drivers/Net/NetsecDxe/netsec_for_uefi/ogma_config.h | 4 ++-- > 3 files changed, 5 insertions(+), 5 deletions(-) > > diff --git a/Silicon/Socionext/SynQuacer/AcpiTables/Dsdt.asl b/Silicon/Socionext/SynQuacer/AcpiTables/Dsdt.asl > index b6f6c4360029..3f73c191d4d6 100644 > --- a/Silicon/Socionext/SynQuacer/AcpiTables/Dsdt.asl > +++ b/Silicon/Socionext/SynQuacer/AcpiTables/Dsdt.asl > @@ -162,7 +162,7 @@ DefinitionBlock ("DsdtTable.aml", "DSDT", 1, "SNI", "SYNQUACR", > Package (2) { "phy-channel", FixedPcdGet32 (PcdNetsecPhyAddress) }, > Package (2) { "max-speed", 1000 }, > Package (2) { "max-frame-size", 9000 }, > - Package (2) { "socionext,phy-clock-frequency", 125000000 }, > + Package (2) { "socionext,phy-clock-frequency", 250000000 }, > } > }) > } > diff --git a/Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi b/Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi > index 6e93c6ae16a8..f6887329f6c7 100644 > --- a/Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi > +++ b/Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi > @@ -420,9 +420,9 @@ > reg-shift = <2>; > }; > > - clk_netsec: refclk125mhz { > + clk_netsec: refclk250mhz { > compatible = "fixed-clock"; > - clock-frequency = <125000000>; > + clock-frequency = <250000000>; > #clock-cells = <0>; > }; > > diff --git a/Silicon/Socionext/SynQuacer/Drivers/Net/NetsecDxe/netsec_for_uefi/ogma_config.h b/Silicon/Socionext/SynQuacer/Drivers/Net/NetsecDxe/netsec_for_uefi/ogma_config.h > index 1caf64e30623..f6ec9b30ec8e 100644 > --- a/Silicon/Socionext/SynQuacer/Drivers/Net/NetsecDxe/netsec_for_uefi/ogma_config.h > +++ b/Silicon/Socionext/SynQuacer/Drivers/Net/NetsecDxe/netsec_for_uefi/ogma_config.h > @@ -16,8 +16,8 @@ > #ifndef OGMA_CONFIG_H > #define OGMA_CONFIG_H > > -#define OGMA_CONFIG_CLK_HZ 125000000UL > -#define OGMA_CONFIG_GMAC_CLK_HZ 125000000UL > +#define OGMA_CONFIG_CLK_HZ 250000000UL > +#define OGMA_CONFIG_GMAC_CLK_HZ 250000000UL > #define OGMA_CONFIG_CHECK_CLK_SUPPLY > > #define OGMA_CONFIG_USE_READ_GMAC_STAT > -- > 2.17.0 > _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
On 16 April 2018 at 13:25, Masahisa Kojima <masahisa.kojima@linaro.org> wrote: > Hi Ard, > >> Please confirm that the modification to ogma_config.h is correct. > > Thank you very much for your update. > We confirmed and your modification is correct. > Thank you Masahisa Does this change apply to all boards? EVB, rev 0.1 etc? _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
Hi Ard, Yes, please apply to all boards. Thank you. On 19 April 2018 at 20:15, Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote: > On 16 April 2018 at 13:25, Masahisa Kojima <masahisa.kojima@linaro.org> wrote: >> Hi Ard, >> >>> Please confirm that the modification to ogma_config.h is correct. >> >> Thank you very much for your update. >> We confirmed and your modification is correct. >> > > Thank you Masahisa > > Does this change apply to all boards? EVB, rev 0.1 etc? _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
On Mon, Apr 16, 2018 at 01:00:58PM +0200, Ard Biesheuvel wrote: > As reported by Kojima-san, the PHY reference clock value we use in our > ACPI and DT descriptions is out of sync with the hardware. Replace > 125 MHz with 250 MHz throughout. > > Cc: Masahisa Kojima <masahisa.kojima@linaro.org> > Contributed-under: TianoCore Contribution Agreement 1.1 > Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> > --- > Kojima-san, > > Please confirm that the modification to ogma_config.h is correct. > > Thanks, > Ard. > > Silicon/Socionext/SynQuacer/AcpiTables/Dsdt.asl | 2 +- > Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi | 4 ++-- > Silicon/Socionext/SynQuacer/Drivers/Net/NetsecDxe/netsec_for_uefi/ogma_config.h | 4 ++-- > 3 files changed, 5 insertions(+), 5 deletions(-) > > diff --git a/Silicon/Socionext/SynQuacer/AcpiTables/Dsdt.asl b/Silicon/Socionext/SynQuacer/AcpiTables/Dsdt.asl > index b6f6c4360029..3f73c191d4d6 100644 > --- a/Silicon/Socionext/SynQuacer/AcpiTables/Dsdt.asl > +++ b/Silicon/Socionext/SynQuacer/AcpiTables/Dsdt.asl > @@ -162,7 +162,7 @@ DefinitionBlock ("DsdtTable.aml", "DSDT", 1, "SNI", "SYNQUACR", > Package (2) { "phy-channel", FixedPcdGet32 (PcdNetsecPhyAddress) }, > Package (2) { "max-speed", 1000 }, > Package (2) { "max-frame-size", 9000 }, > - Package (2) { "socionext,phy-clock-frequency", 125000000 }, > + Package (2) { "socionext,phy-clock-frequency", 250000000 }, > } > }) > } > diff --git a/Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi b/Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi > index 6e93c6ae16a8..f6887329f6c7 100644 > --- a/Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi > +++ b/Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi > @@ -420,9 +420,9 @@ > reg-shift = <2>; > }; > > - clk_netsec: refclk125mhz { > + clk_netsec: refclk250mhz { > compatible = "fixed-clock"; > - clock-frequency = <125000000>; > + clock-frequency = <250000000>; > #clock-cells = <0>; > }; > > diff --git a/Silicon/Socionext/SynQuacer/Drivers/Net/NetsecDxe/netsec_for_uefi/ogma_config.h b/Silicon/Socionext/SynQuacer/Drivers/Net/NetsecDxe/netsec_for_uefi/ogma_config.h > index 1caf64e30623..f6ec9b30ec8e 100644 > --- a/Silicon/Socionext/SynQuacer/Drivers/Net/NetsecDxe/netsec_for_uefi/ogma_config.h > +++ b/Silicon/Socionext/SynQuacer/Drivers/Net/NetsecDxe/netsec_for_uefi/ogma_config.h > @@ -16,8 +16,8 @@ > #ifndef OGMA_CONFIG_H > #define OGMA_CONFIG_H > > -#define OGMA_CONFIG_CLK_HZ 125000000UL > -#define OGMA_CONFIG_GMAC_CLK_HZ 125000000UL > +#define OGMA_CONFIG_CLK_HZ 250000000UL > +#define OGMA_CONFIG_GMAC_CLK_HZ 250000000UL > #define OGMA_CONFIG_CHECK_CLK_SUPPLY > > #define OGMA_CONFIG_USE_READ_GMAC_STAT > -- > 2.17.0 > _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
On 19 April 2018 at 17:38, Leif Lindholm <leif.lindholm@linaro.org> wrote: > On Mon, Apr 16, 2018 at 01:00:58PM +0200, Ard Biesheuvel wrote: >> As reported by Kojima-san, the PHY reference clock value we use in our >> ACPI and DT descriptions is out of sync with the hardware. Replace >> 125 MHz with 250 MHz throughout. >> >> Cc: Masahisa Kojima <masahisa.kojima@linaro.org> >> Contributed-under: TianoCore Contribution Agreement 1.1 >> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> > > Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> > Thanks Pushed as 6c816b0e4175 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
diff --git a/Silicon/Socionext/SynQuacer/AcpiTables/Dsdt.asl b/Silicon/Socionext/SynQuacer/AcpiTables/Dsdt.asl index b6f6c4360029..3f73c191d4d6 100644 --- a/Silicon/Socionext/SynQuacer/AcpiTables/Dsdt.asl +++ b/Silicon/Socionext/SynQuacer/AcpiTables/Dsdt.asl @@ -162,7 +162,7 @@ DefinitionBlock ("DsdtTable.aml", "DSDT", 1, "SNI", "SYNQUACR", Package (2) { "phy-channel", FixedPcdGet32 (PcdNetsecPhyAddress) }, Package (2) { "max-speed", 1000 }, Package (2) { "max-frame-size", 9000 }, - Package (2) { "socionext,phy-clock-frequency", 125000000 }, + Package (2) { "socionext,phy-clock-frequency", 250000000 }, } }) } diff --git a/Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi b/Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi index 6e93c6ae16a8..f6887329f6c7 100644 --- a/Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi +++ b/Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi @@ -420,9 +420,9 @@ reg-shift = <2>; }; - clk_netsec: refclk125mhz { + clk_netsec: refclk250mhz { compatible = "fixed-clock"; - clock-frequency = <125000000>; + clock-frequency = <250000000>; #clock-cells = <0>; }; diff --git a/Silicon/Socionext/SynQuacer/Drivers/Net/NetsecDxe/netsec_for_uefi/ogma_config.h b/Silicon/Socionext/SynQuacer/Drivers/Net/NetsecDxe/netsec_for_uefi/ogma_config.h index 1caf64e30623..f6ec9b30ec8e 100644 --- a/Silicon/Socionext/SynQuacer/Drivers/Net/NetsecDxe/netsec_for_uefi/ogma_config.h +++ b/Silicon/Socionext/SynQuacer/Drivers/Net/NetsecDxe/netsec_for_uefi/ogma_config.h @@ -16,8 +16,8 @@ #ifndef OGMA_CONFIG_H #define OGMA_CONFIG_H -#define OGMA_CONFIG_CLK_HZ 125000000UL -#define OGMA_CONFIG_GMAC_CLK_HZ 125000000UL +#define OGMA_CONFIG_CLK_HZ 250000000UL +#define OGMA_CONFIG_GMAC_CLK_HZ 250000000UL #define OGMA_CONFIG_CHECK_CLK_SUPPLY #define OGMA_CONFIG_USE_READ_GMAC_STAT
As reported by Kojima-san, the PHY reference clock value we use in our ACPI and DT descriptions is out of sync with the hardware. Replace 125 MHz with 250 MHz throughout. Cc: Masahisa Kojima <masahisa.kojima@linaro.org> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> --- Kojima-san, Please confirm that the modification to ogma_config.h is correct. Thanks, Ard. Silicon/Socionext/SynQuacer/AcpiTables/Dsdt.asl | 2 +- Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi | 4 ++-- Silicon/Socionext/SynQuacer/Drivers/Net/NetsecDxe/netsec_for_uefi/ogma_config.h | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-) -- 2.17.0 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel