| Message ID | 20190524162651.28189-1-ard.biesheuvel@linaro.org |
|---|---|
| Headers | show |
| Series | crypto - wire up Atmel SHA204A as RNG in DT and ACPI mode | expand |
On Fri, May 24, 2019 at 11:27 AM Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote: > > Move the binding for the discrete Atmel I2C Elliptic Curve h/w crypto > module to trivial-devices.yaml, as it doesn't belong in atmel-crypto > which describes unrelated on-SoC peripherals. > > Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> > --- > Documentation/devicetree/bindings/crypto/atmel-crypto.txt | 13 ------------- > Documentation/devicetree/bindings/trivial-devices.yaml | 2 ++ > 2 files changed, 2 insertions(+), 13 deletions(-) Reviewed-by: Rob Herring <robh@kernel.org>
On Fri, May 24, 2019 at 06:26:45PM +0200, Ard Biesheuvel wrote: > The Socionext SynQuacer based 96boards DeveloperBox platform does not > incorporate a random number generator, but it does have a 96boards low > speed connector which supports extension boards such as the Secure96, > which has a TPM and some crypto accelerators, one of which incorporates > a random number generator. > > This series implements support for the RNG part, which is one of several > functions of the Atmel SHA204A I2C crypto accelerator, and wires it up so > both DT and ACPI based boot methods can use the device. > > v2: > - update DT binding patches so the SHA204A and ECC508A module bindings are > in trivial-devices.yaml. > - add acks from Linus and Mika > > Assuming Rob is ok now with the DT binding patches, can we please take > this through the crypto tree? > > Cc: Herbert Xu <herbert@gondor.apana.org.au> > Cc: Tudor Ambarus <tudor.ambarus@microchip.com> > Cc: Linus Walleij <linus.walleij@linaro.org> > Cc: Mika Westerberg <mika.westerberg@linux.intel.com> > > Ard Biesheuvel (6): > i2c: acpi: permit bus speed to be discovered after enumeration > crypto: atmel-ecc: add support for ACPI probing on non-AT91 platforms > crypto: atmel-ecc: factor out code that can be shared > crypto: atmel-i2c: add support for SHA204A random number generator > dt-bindings: add Atmel SHA204A I2C crypto processor > dt-bindings: move Atmel ECC508A I2C crypto processor to > trivial-devices > > Documentation/devicetree/bindings/crypto/atmel-crypto.txt | 13 - > Documentation/devicetree/bindings/trivial-devices.yaml | 4 + > drivers/crypto/Kconfig | 19 +- > drivers/crypto/Makefile | 2 + > drivers/crypto/atmel-ecc.c | 403 ++------------------ > drivers/crypto/atmel-ecc.h | 116 ------ > drivers/crypto/atmel-i2c.c | 364 ++++++++++++++++++ > drivers/crypto/atmel-i2c.h | 196 ++++++++++ > drivers/crypto/atmel-sha204a.c | 171 +++++++++ > drivers/i2c/i2c-core-acpi.c | 6 +- > 10 files changed, 781 insertions(+), 513 deletions(-) > delete mode 100644 drivers/crypto/atmel-ecc.h > create mode 100644 drivers/crypto/atmel-i2c.c > create mode 100644 drivers/crypto/atmel-i2c.h > create mode 100644 drivers/crypto/atmel-sha204a.c All applied. Thanks. -- Email: Herbert Xu <herbert@gondor.apana.org.au> Home Page: http://gondor.apana.org.au/~herbert/ PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
The Socionext SynQuacer based 96boards DeveloperBox platform does not incorporate a random number generator, but it does have a 96boards low speed connector which supports extension boards such as the Secure96, which has a TPM and some crypto accelerators, one of which incorporates a random number generator. This series implements support for the RNG part, which is one of several functions of the Atmel SHA204A I2C crypto accelerator, and wires it up so both DT and ACPI based boot methods can use the device. v2: - update DT binding patches so the SHA204A and ECC508A module bindings are in trivial-devices.yaml. - add acks from Linus and Mika Assuming Rob is ok now with the DT binding patches, can we please take this through the crypto tree? Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Tudor Ambarus <tudor.ambarus@microchip.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Ard Biesheuvel (6): i2c: acpi: permit bus speed to be discovered after enumeration crypto: atmel-ecc: add support for ACPI probing on non-AT91 platforms crypto: atmel-ecc: factor out code that can be shared crypto: atmel-i2c: add support for SHA204A random number generator dt-bindings: add Atmel SHA204A I2C crypto processor dt-bindings: move Atmel ECC508A I2C crypto processor to trivial-devices Documentation/devicetree/bindings/crypto/atmel-crypto.txt | 13 - Documentation/devicetree/bindings/trivial-devices.yaml | 4 + drivers/crypto/Kconfig | 19 +- drivers/crypto/Makefile | 2 + drivers/crypto/atmel-ecc.c | 403 ++------------------ drivers/crypto/atmel-ecc.h | 116 ------ drivers/crypto/atmel-i2c.c | 364 ++++++++++++++++++ drivers/crypto/atmel-i2c.h | 196 ++++++++++ drivers/crypto/atmel-sha204a.c | 171 +++++++++ drivers/i2c/i2c-core-acpi.c | 6 +- 10 files changed, 781 insertions(+), 513 deletions(-) delete mode 100644 drivers/crypto/atmel-ecc.h create mode 100644 drivers/crypto/atmel-i2c.c create mode 100644 drivers/crypto/atmel-i2c.h create mode 100644 drivers/crypto/atmel-sha204a.c -- 2.20.1