diff mbox series

[09/36] ARM: samsung: move pm check code to drivers/soc

Message ID 20191010203043.1241612-9-arnd@arndb.de
State New
Headers show
Series None | expand

Commit Message

Arnd Bergmann Oct. 10, 2019, 8:29 p.m. UTC 
This is the only part of plat-samsung that is really
shared between the s3c and s5p ports. Moving it to
drivers/soc/ lets us make them completely independent.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

---
 arch/arm/mach-s5pv210/Kconfig                 |  1 +
 arch/arm/plat-samsung/Kconfig                 | 49 +----------
 arch/arm/plat-samsung/Makefile                |  2 -
 .../arm/plat-samsung/include/plat/pm-common.h | 70 +---------------
 drivers/soc/samsung/Kconfig                   | 48 ++++++++++-
 drivers/soc/samsung/Makefile                  |  3 +
 .../soc/samsung/s3c-pm-check.c                |  2 +-
 .../soc/samsung/s3c-pm-debug.c                |  3 +-
 include/linux/soc/samsung/s3c-pm.h            | 84 +++++++++++++++++++
 9 files changed, 139 insertions(+), 123 deletions(-)
 rename arch/arm/plat-samsung/pm-check.c => drivers/soc/samsung/s3c-pm-check.c (99%)
 rename arch/arm/plat-samsung/pm-debug.c => drivers/soc/samsung/s3c-pm-debug.c (97%)
 create mode 100644 include/linux/soc/samsung/s3c-pm.h

-- 
2.20.0

Comments

Krzysztof Kozlowski Oct. 23, 2019, 11:32 a.m. UTC | #1 
On Thu, Oct 10, 2019 at 10:29:53PM +0200, Arnd Bergmann wrote:
> This is the only part of plat-samsung that is really

> shared between the s3c and s5p ports. Moving it to

> drivers/soc/ lets us make them completely independent.

> 

> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

> ---

>  arch/arm/mach-s5pv210/Kconfig                 |  1 +

>  arch/arm/plat-samsung/Kconfig                 | 49 +----------

>  arch/arm/plat-samsung/Makefile                |  2 -

>  .../arm/plat-samsung/include/plat/pm-common.h | 70 +---------------

>  drivers/soc/samsung/Kconfig                   | 48 ++++++++++-

>  drivers/soc/samsung/Makefile                  |  3 +

>  .../soc/samsung/s3c-pm-check.c                |  2 +-

>  .../soc/samsung/s3c-pm-debug.c                |  3 +-

>  include/linux/soc/samsung/s3c-pm.h            | 84 +++++++++++++++++++

>  9 files changed, 139 insertions(+), 123 deletions(-)

>  rename arch/arm/plat-samsung/pm-check.c => drivers/soc/samsung/s3c-pm-check.c (99%)

>  rename arch/arm/plat-samsung/pm-debug.c => drivers/soc/samsung/s3c-pm-debug.c (97%)

>  create mode 100644 include/linux/soc/samsung/s3c-pm.h

> 

> diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig

> index 03984a791879..d2b0e64bad7e 100644

> --- a/arch/arm/mach-s5pv210/Kconfig

> +++ b/arch/arm/mach-s5pv210/Kconfig

> @@ -18,6 +18,7 @@ config ARCH_S5PV210

>  	select HAVE_S3C_RTC if RTC_CLASS

>  	select PINCTRL

>  	select PINCTRL_EXYNOS

> +	select SOC_SAMSUNG

>  	help

>  	  Samsung S5PV210/S5PC110 series based systems

>  

> diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig

> index e31a156a27df..740bdb23f38a 100644

> --- a/arch/arm/plat-samsung/Kconfig

> +++ b/arch/arm/plat-samsung/Kconfig

> @@ -8,6 +8,7 @@ config PLAT_SAMSUNG

>  	default y

>  	select GENERIC_IRQ_CHIP

>  	select NO_IOPORT_MAP

> +	select SOC_SAMSUNG

>  	help

>  	  Base platform code for all Samsung SoC based systems

>  

> @@ -234,54 +235,6 @@ config SAMSUNG_PM_GPIO

>  	  pinctrl-samsung driver.

>  endif

>  

> -comment "Power management"

> -

> -config SAMSUNG_PM_DEBUG

> -	bool "Samsung PM Suspend debug"

> -	depends on PM && DEBUG_KERNEL

> -	depends on PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210

> -	depends on DEBUG_S3C24XX_UART || DEBUG_S3C2410_UART

> -	help

> -	  Say Y here if you want verbose debugging from the PM Suspend and

> -	  Resume code. See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>

> -	  for more information.

> -

> -config S3C_PM_DEBUG_LED_SMDK

> -       bool "SMDK LED suspend/resume debugging"

> -       depends on PM && (MACH_SMDK6410)

> -       help

> -         Say Y here to enable the use of the SMDK LEDs on the baseboard

> -	 for debugging of the state of the suspend and resume process.

> -

> -	 Note, this currently only works for S3C64XX based SMDK boards.

> -

> -config SAMSUNG_PM_CHECK

> -	bool "S3C2410 PM Suspend Memory CRC"

> -	depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210)

> -	select CRC32

> -	help

> -	  Enable the PM code's memory area checksum over sleep. This option

> -	  will generate CRCs of all blocks of memory, and store them before

> -	  going to sleep. The blocks are then checked on resume for any

> -	  errors.

> -

> -	  Note, this can take several seconds depending on memory size

> -	  and CPU speed.

> -

> -	  See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>

> -

> -config SAMSUNG_PM_CHECK_CHUNKSIZE

> -	int "S3C2410 PM Suspend CRC Chunksize (KiB)"

> -	depends on PM && SAMSUNG_PM_CHECK

> -	default 64

> -	help

> -	  Set the chunksize in Kilobytes of the CRC for checking memory

> -	  corruption over suspend and resume. A smaller value will mean that

> -	  the CRC data block will take more memory, but will identify any

> -	  faults with better precision.

> -

> -	  See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>

> -

>  config SAMSUNG_WAKEMASK

>  	bool

>  	depends on PM

> diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile

> index 3db9d2c38258..d88b9b84f3a9 100644

> --- a/arch/arm/plat-samsung/Makefile

> +++ b/arch/arm/plat-samsung/Makefile

> @@ -28,8 +28,6 @@ obj-$(CONFIG_PM_SLEEP)		+= pm-common.o

>  obj-$(CONFIG_EXYNOS_CPU_SUSPEND) += pm-common.o

>  obj-$(CONFIG_SAMSUNG_PM)	+= pm.o

>  obj-$(CONFIG_SAMSUNG_PM_GPIO)	+= pm-gpio.o

> -obj-$(CONFIG_SAMSUNG_PM_CHECK)	+= pm-check.o

> -obj-$(CONFIG_SAMSUNG_PM_DEBUG)	+= pm-debug.o

>  

>  obj-$(CONFIG_SAMSUNG_WAKEMASK)	+= wakeup-mask.o

>  obj-$(CONFIG_SAMSUNG_WDT_RESET)	+= watchdog-reset.o

> diff --git a/arch/arm/plat-samsung/include/plat/pm-common.h b/arch/arm/plat-samsung/include/plat/pm-common.h

> index 87fa97fd6e8b..18b9607e1e39 100644

> --- a/arch/arm/plat-samsung/include/plat/pm-common.h

> +++ b/arch/arm/plat-samsung/include/plat/pm-common.h

> @@ -11,6 +11,7 @@

>  #define __PLAT_SAMSUNG_PM_COMMON_H __FILE__

>  

>  #include <linux/irq.h>

> +#include <linux/soc/samsung/s3c-pm.h>

>  

>  /* sleep save info */

>  

> @@ -36,73 +37,4 @@ extern void s3c_pm_do_save(struct sleep_save *ptr, int count);

>  extern void s3c_pm_do_restore(const struct sleep_save *ptr, int count);

>  extern void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count);

>  

> -/* PM debug functions */

> -

> -/**

> - * struct pm_uart_save - save block for core UART

> - * @ulcon: Save value for S3C2410_ULCON

> - * @ucon: Save value for S3C2410_UCON

> - * @ufcon: Save value for S3C2410_UFCON

> - * @umcon: Save value for S3C2410_UMCON

> - * @ubrdiv: Save value for S3C2410_UBRDIV

> - *

> - * Save block for UART registers to be held over sleep and restored if they

> - * are needed (say by debug).

> -*/

> -struct pm_uart_save {

> -	u32	ulcon;

> -	u32	ucon;

> -	u32	ufcon;

> -	u32	umcon;

> -	u32	ubrdiv;

> -	u32	udivslot;

> -};

> -

> -#ifdef CONFIG_SAMSUNG_PM_DEBUG

> -/**

> - * s3c_pm_dbg() - low level debug function for use in suspend/resume.

> - * @msg: The message to print.

> - *

> - * This function is used mainly to debug the resume process before the system

> - * can rely on printk/console output. It uses the low-level debugging output

> - * routine printascii() to do its work.

> - */

> -extern void s3c_pm_dbg(const char *msg, ...);

> -

> -#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt)

> -

> -extern void s3c_pm_save_uarts(bool is_s3c24xx);

> -extern void s3c_pm_restore_uarts(bool is_s3c24xx);

> -

> -#ifdef CONFIG_ARCH_S3C64XX

> -extern void s3c_pm_arch_update_uart(void __iomem *regs,

> -				    struct pm_uart_save *save);

> -#else

> -static inline void

> -s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save)

> -{

> -}

> -#endif

> -

> -#else

> -#define S3C_PMDBG(fmt...) pr_debug(fmt)

> -

> -static inline void s3c_pm_save_uarts(bool is_s3c24xx) { }

> -static inline void s3c_pm_restore_uarts(bool is_s3c24xx) { }

> -#endif

> -

> -/* suspend memory checking */

> -

> -#ifdef CONFIG_SAMSUNG_PM_CHECK

> -extern void s3c_pm_check_prepare(void);

> -extern void s3c_pm_check_restore(void);

> -extern void s3c_pm_check_cleanup(void);

> -extern void s3c_pm_check_store(void);

> -#else

> -#define s3c_pm_check_prepare() do { } while (0)

> -#define s3c_pm_check_restore() do { } while (0)

> -#define s3c_pm_check_cleanup() do { } while (0)

> -#define s3c_pm_check_store()   do { } while (0)

> -#endif

> -

>  #endif

> diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig

> index 33ad0de2de3c..0ea7402ffba3 100644

> --- a/drivers/soc/samsung/Kconfig

> +++ b/drivers/soc/samsung/Kconfig

> @@ -25,6 +25,52 @@ config EXYNOS_PMU_ARM_DRIVERS

>  

>  config EXYNOS_PM_DOMAINS

>  	bool "Exynos PM domains" if COMPILE_TEST

> -	depends on PM_GENERIC_DOMAINS || COMPILE_TEST

> +	depends on (ARCH_EXYNOS && PM_GENERIC_DOMAINS) || COMPILE_TEST

> +

> +config SAMSUNG_PM_DEBUG

> +	bool "Samsung PM Suspend debug"

> +	depends on PM && DEBUG_KERNEL

> +	depends on PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210

> +	depends on DEBUG_S3C24XX_UART || DEBUG_S3C2410_UART

> +	help

> +	  Say Y here if you want verbose debugging from the PM Suspend and

> +	  Resume code. See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>

> +	  for more information.

> +

> +config S3C_PM_DEBUG_LED_SMDK

> +       bool "SMDK LED suspend/resume debugging"

> +       depends on PM && (MACH_SMDK6410)

> +       help

> +         Say Y here to enable the use of the SMDK LEDs on the baseboard

> +	 for debugging of the state of the suspend and resume process.

> +

> +	 Note, this currently only works for S3C64XX based SMDK boards.

> +

> +config SAMSUNG_PM_CHECK

> +	bool "S3C2410 PM Suspend Memory CRC"

> +	depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210)

> +	select CRC32

> +	help

> +	  Enable the PM code's memory area checksum over sleep. This option

> +	  will generate CRCs of all blocks of memory, and store them before

> +	  going to sleep. The blocks are then checked on resume for any

> +	  errors.

> +

> +	  Note, this can take several seconds depending on memory size

> +	  and CPU speed.

> +

> +	  See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>

> +

> +config SAMSUNG_PM_CHECK_CHUNKSIZE

> +	int "S3C2410 PM Suspend CRC Chunksize (KiB)"

> +	depends on PM && SAMSUNG_PM_CHECK

> +	default 64

> +	help

> +	  Set the chunksize in Kilobytes of the CRC for checking memory

> +	  corruption over suspend and resume. A smaller value will mean that

> +	  the CRC data block will take more memory, but will identify any

> +	  faults with better precision.

> +

> +	  See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>

>  

>  endif

> diff --git a/drivers/soc/samsung/Makefile b/drivers/soc/samsung/Makefile

> index 3b6a8797416c..88ae7a522055 100644

> --- a/drivers/soc/samsung/Makefile

> +++ b/drivers/soc/samsung/Makefile

> @@ -6,3 +6,6 @@ obj-$(CONFIG_EXYNOS_PMU)	+= exynos-pmu.o

>  obj-$(CONFIG_EXYNOS_PMU_ARM_DRIVERS)	+= exynos3250-pmu.o exynos4-pmu.o \

>  					exynos5250-pmu.o exynos5420-pmu.o

>  obj-$(CONFIG_EXYNOS_PM_DOMAINS) += pm_domains.o

> +

> +obj-$(CONFIG_SAMSUNG_PM_CHECK)	+= s3c-pm-check.o

> +obj-$(CONFIG_SAMSUNG_PM_DEBUG)	+= s3c-pm-debug.o

> diff --git a/arch/arm/plat-samsung/pm-check.c b/drivers/soc/samsung/s3c-pm-check.c

> similarity index 99%

> rename from arch/arm/plat-samsung/pm-check.c

> rename to drivers/soc/samsung/s3c-pm-check.c

> index cd2c02c68bc3..ff3e099fc208 100644

> --- a/arch/arm/plat-samsung/pm-check.c

> +++ b/drivers/soc/samsung/s3c-pm-check.c

> @@ -15,7 +15,7 @@

>  #include <linux/ioport.h>

>  #include <linux/slab.h>

>  

> -#include <plat/pm-common.h>

> +#include <linux/soc/samsung/s3c-pm.h>

>  

>  #if CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE < 1

>  #error CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE must be a positive non-zero value

> diff --git a/arch/arm/plat-samsung/pm-debug.c b/drivers/soc/samsung/s3c-pm-debug.c

> similarity index 97%

> rename from arch/arm/plat-samsung/pm-debug.c

> rename to drivers/soc/samsung/s3c-pm-debug.c

> index 482d53753e93..b5ce0e9a41e5 100644

> --- a/arch/arm/plat-samsung/pm-debug.c

> +++ b/drivers/soc/samsung/s3c-pm-debug.c

> @@ -15,8 +15,7 @@

>  

>  #include <asm/mach/map.h>

>  

> -#include <plat/cpu.h>

> -#include <plat/pm-common.h>

> +#include <linux/soc/samsung/s3c-pm.h>

>  

>  static struct pm_uart_save uart_save;

>  

> diff --git a/include/linux/soc/samsung/s3c-pm.h b/include/linux/soc/samsung/s3c-pm.h

> new file mode 100644

> index 000000000000..d477b314d034

> --- /dev/null

> +++ b/include/linux/soc/samsung/s3c-pm.h

> @@ -0,0 +1,84 @@

> +/* SPDX-License-Identifier: GPL-2.0 */

> +/*

> + * Copyright (C) 2013 Samsung Electronics Co., Ltd.

> + *	Tomasz Figa <t.figa@samsung.com>

> + * Copyright (c) 2004 Simtec Electronics

> + *	http://armlinux.simtec.co.uk/

> + *	Written by Ben Dooks, <ben@simtec.co.uk>

> + */

> +

> +#ifndef __SAMSUNG_SOC_S3C_PM_H

> +#define __SAMSUNG_SOC_S3C_PM_H __FILE__


Use guard name prefix consistent with other files, so:
__LINUX_SOC_SAMSUNG_S3C_PM_H

Rest looks good.

Best regards,
Krzysztof
Arnd Bergmann Oct. 23, 2019, 12:45 p.m. UTC | #2 
On Wed, Oct 23, 2019 at 1:33 PM Krzysztof Kozlowski <krzk@kernel.org> wrote:
>

> On Thu, Oct 10, 2019 at 10:29:53PM +0200, Arnd Bergmann wrote:

> > This is the only part of plat-samsung that is really

> > shared between the s3c and s5p ports. Moving it to

> > drivers/soc/ lets us make them completely independent.

> >

> > Signed-off-by: Arnd Bergmann <arnd@arndb.de>

> > ---

> > + *   Tomasz Figa <t.figa@samsung.com>

> > + * Copyright (c) 2004 Simtec Electronics

> > + *   http://armlinux.simtec.co.uk/

> > + *   Written by Ben Dooks, <ben@simtec.co.uk>

> > + */

> > +

> > +#ifndef __SAMSUNG_SOC_S3C_PM_H

> > +#define __SAMSUNG_SOC_S3C_PM_H __FILE__

>

> Use guard name prefix consistent with other files, so:

> __LINUX_SOC_SAMSUNG_S3C_PM_H


Ok, done.

        Arnd
diff mbox series

Patch

diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 03984a791879..d2b0e64bad7e 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -18,6 +18,7 @@  config ARCH_S5PV210
 	select HAVE_S3C_RTC if RTC_CLASS
 	select PINCTRL
 	select PINCTRL_EXYNOS
+	select SOC_SAMSUNG
 	help
 	  Samsung S5PV210/S5PC110 series based systems
 
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index e31a156a27df..740bdb23f38a 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -8,6 +8,7 @@  config PLAT_SAMSUNG
 	default y
 	select GENERIC_IRQ_CHIP
 	select NO_IOPORT_MAP
+	select SOC_SAMSUNG
 	help
 	  Base platform code for all Samsung SoC based systems
 
@@ -234,54 +235,6 @@  config SAMSUNG_PM_GPIO
 	  pinctrl-samsung driver.
 endif
 
-comment "Power management"
-
-config SAMSUNG_PM_DEBUG
-	bool "Samsung PM Suspend debug"
-	depends on PM && DEBUG_KERNEL
-	depends on PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
-	depends on DEBUG_S3C24XX_UART || DEBUG_S3C2410_UART
-	help
-	  Say Y here if you want verbose debugging from the PM Suspend and
-	  Resume code. See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
-	  for more information.
-
-config S3C_PM_DEBUG_LED_SMDK
-       bool "SMDK LED suspend/resume debugging"
-       depends on PM && (MACH_SMDK6410)
-       help
-         Say Y here to enable the use of the SMDK LEDs on the baseboard
-	 for debugging of the state of the suspend and resume process.
-
-	 Note, this currently only works for S3C64XX based SMDK boards.
-
-config SAMSUNG_PM_CHECK
-	bool "S3C2410 PM Suspend Memory CRC"
-	depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210)
-	select CRC32
-	help
-	  Enable the PM code's memory area checksum over sleep. This option
-	  will generate CRCs of all blocks of memory, and store them before
-	  going to sleep. The blocks are then checked on resume for any
-	  errors.
-
-	  Note, this can take several seconds depending on memory size
-	  and CPU speed.
-
-	  See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
-
-config SAMSUNG_PM_CHECK_CHUNKSIZE
-	int "S3C2410 PM Suspend CRC Chunksize (KiB)"
-	depends on PM && SAMSUNG_PM_CHECK
-	default 64
-	help
-	  Set the chunksize in Kilobytes of the CRC for checking memory
-	  corruption over suspend and resume. A smaller value will mean that
-	  the CRC data block will take more memory, but will identify any
-	  faults with better precision.
-
-	  See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
-
 config SAMSUNG_WAKEMASK
 	bool
 	depends on PM
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 3db9d2c38258..d88b9b84f3a9 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -28,8 +28,6 @@  obj-$(CONFIG_PM_SLEEP)		+= pm-common.o
 obj-$(CONFIG_EXYNOS_CPU_SUSPEND) += pm-common.o
 obj-$(CONFIG_SAMSUNG_PM)	+= pm.o
 obj-$(CONFIG_SAMSUNG_PM_GPIO)	+= pm-gpio.o
-obj-$(CONFIG_SAMSUNG_PM_CHECK)	+= pm-check.o
-obj-$(CONFIG_SAMSUNG_PM_DEBUG)	+= pm-debug.o
 
 obj-$(CONFIG_SAMSUNG_WAKEMASK)	+= wakeup-mask.o
 obj-$(CONFIG_SAMSUNG_WDT_RESET)	+= watchdog-reset.o
diff --git a/arch/arm/plat-samsung/include/plat/pm-common.h b/arch/arm/plat-samsung/include/plat/pm-common.h
index 87fa97fd6e8b..18b9607e1e39 100644
--- a/arch/arm/plat-samsung/include/plat/pm-common.h
+++ b/arch/arm/plat-samsung/include/plat/pm-common.h
@@ -11,6 +11,7 @@ 
 #define __PLAT_SAMSUNG_PM_COMMON_H __FILE__
 
 #include <linux/irq.h>
+#include <linux/soc/samsung/s3c-pm.h>
 
 /* sleep save info */
 
@@ -36,73 +37,4 @@  extern void s3c_pm_do_save(struct sleep_save *ptr, int count);
 extern void s3c_pm_do_restore(const struct sleep_save *ptr, int count);
 extern void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count);
 
-/* PM debug functions */
-
-/**
- * struct pm_uart_save - save block for core UART
- * @ulcon: Save value for S3C2410_ULCON
- * @ucon: Save value for S3C2410_UCON
- * @ufcon: Save value for S3C2410_UFCON
- * @umcon: Save value for S3C2410_UMCON
- * @ubrdiv: Save value for S3C2410_UBRDIV
- *
- * Save block for UART registers to be held over sleep and restored if they
- * are needed (say by debug).
-*/
-struct pm_uart_save {
-	u32	ulcon;
-	u32	ucon;
-	u32	ufcon;
-	u32	umcon;
-	u32	ubrdiv;
-	u32	udivslot;
-};
-
-#ifdef CONFIG_SAMSUNG_PM_DEBUG
-/**
- * s3c_pm_dbg() - low level debug function for use in suspend/resume.
- * @msg: The message to print.
- *
- * This function is used mainly to debug the resume process before the system
- * can rely on printk/console output. It uses the low-level debugging output
- * routine printascii() to do its work.
- */
-extern void s3c_pm_dbg(const char *msg, ...);
-
-#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt)
-
-extern void s3c_pm_save_uarts(bool is_s3c24xx);
-extern void s3c_pm_restore_uarts(bool is_s3c24xx);
-
-#ifdef CONFIG_ARCH_S3C64XX
-extern void s3c_pm_arch_update_uart(void __iomem *regs,
-				    struct pm_uart_save *save);
-#else
-static inline void
-s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save)
-{
-}
-#endif
-
-#else
-#define S3C_PMDBG(fmt...) pr_debug(fmt)
-
-static inline void s3c_pm_save_uarts(bool is_s3c24xx) { }
-static inline void s3c_pm_restore_uarts(bool is_s3c24xx) { }
-#endif
-
-/* suspend memory checking */
-
-#ifdef CONFIG_SAMSUNG_PM_CHECK
-extern void s3c_pm_check_prepare(void);
-extern void s3c_pm_check_restore(void);
-extern void s3c_pm_check_cleanup(void);
-extern void s3c_pm_check_store(void);
-#else
-#define s3c_pm_check_prepare() do { } while (0)
-#define s3c_pm_check_restore() do { } while (0)
-#define s3c_pm_check_cleanup() do { } while (0)
-#define s3c_pm_check_store()   do { } while (0)
-#endif
-
 #endif
diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig
index 33ad0de2de3c..0ea7402ffba3 100644
--- a/drivers/soc/samsung/Kconfig
+++ b/drivers/soc/samsung/Kconfig
@@ -25,6 +25,52 @@  config EXYNOS_PMU_ARM_DRIVERS
 
 config EXYNOS_PM_DOMAINS
 	bool "Exynos PM domains" if COMPILE_TEST
-	depends on PM_GENERIC_DOMAINS || COMPILE_TEST
+	depends on (ARCH_EXYNOS && PM_GENERIC_DOMAINS) || COMPILE_TEST
+
+config SAMSUNG_PM_DEBUG
+	bool "Samsung PM Suspend debug"
+	depends on PM && DEBUG_KERNEL
+	depends on PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
+	depends on DEBUG_S3C24XX_UART || DEBUG_S3C2410_UART
+	help
+	  Say Y here if you want verbose debugging from the PM Suspend and
+	  Resume code. See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
+	  for more information.
+
+config S3C_PM_DEBUG_LED_SMDK
+       bool "SMDK LED suspend/resume debugging"
+       depends on PM && (MACH_SMDK6410)
+       help
+         Say Y here to enable the use of the SMDK LEDs on the baseboard
+	 for debugging of the state of the suspend and resume process.
+
+	 Note, this currently only works for S3C64XX based SMDK boards.
+
+config SAMSUNG_PM_CHECK
+	bool "S3C2410 PM Suspend Memory CRC"
+	depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210)
+	select CRC32
+	help
+	  Enable the PM code's memory area checksum over sleep. This option
+	  will generate CRCs of all blocks of memory, and store them before
+	  going to sleep. The blocks are then checked on resume for any
+	  errors.
+
+	  Note, this can take several seconds depending on memory size
+	  and CPU speed.
+
+	  See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
+
+config SAMSUNG_PM_CHECK_CHUNKSIZE
+	int "S3C2410 PM Suspend CRC Chunksize (KiB)"
+	depends on PM && SAMSUNG_PM_CHECK
+	default 64
+	help
+	  Set the chunksize in Kilobytes of the CRC for checking memory
+	  corruption over suspend and resume. A smaller value will mean that
+	  the CRC data block will take more memory, but will identify any
+	  faults with better precision.
+
+	  See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
 
 endif
diff --git a/drivers/soc/samsung/Makefile b/drivers/soc/samsung/Makefile
index 3b6a8797416c..88ae7a522055 100644
--- a/drivers/soc/samsung/Makefile
+++ b/drivers/soc/samsung/Makefile
@@ -6,3 +6,6 @@  obj-$(CONFIG_EXYNOS_PMU)	+= exynos-pmu.o
 obj-$(CONFIG_EXYNOS_PMU_ARM_DRIVERS)	+= exynos3250-pmu.o exynos4-pmu.o \
 					exynos5250-pmu.o exynos5420-pmu.o
 obj-$(CONFIG_EXYNOS_PM_DOMAINS) += pm_domains.o
+
+obj-$(CONFIG_SAMSUNG_PM_CHECK)	+= s3c-pm-check.o
+obj-$(CONFIG_SAMSUNG_PM_DEBUG)	+= s3c-pm-debug.o
diff --git a/arch/arm/plat-samsung/pm-check.c b/drivers/soc/samsung/s3c-pm-check.c
similarity index 99%
rename from arch/arm/plat-samsung/pm-check.c
rename to drivers/soc/samsung/s3c-pm-check.c
index cd2c02c68bc3..ff3e099fc208 100644
--- a/arch/arm/plat-samsung/pm-check.c
+++ b/drivers/soc/samsung/s3c-pm-check.c
@@ -15,7 +15,7 @@ 
 #include <linux/ioport.h>
 #include <linux/slab.h>
 
-#include <plat/pm-common.h>
+#include <linux/soc/samsung/s3c-pm.h>
 
 #if CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE < 1
 #error CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE must be a positive non-zero value
diff --git a/arch/arm/plat-samsung/pm-debug.c b/drivers/soc/samsung/s3c-pm-debug.c
similarity index 97%
rename from arch/arm/plat-samsung/pm-debug.c
rename to drivers/soc/samsung/s3c-pm-debug.c
index 482d53753e93..b5ce0e9a41e5 100644
--- a/arch/arm/plat-samsung/pm-debug.c
+++ b/drivers/soc/samsung/s3c-pm-debug.c
@@ -15,8 +15,7 @@ 
 
 #include <asm/mach/map.h>
 
-#include <plat/cpu.h>
-#include <plat/pm-common.h>
+#include <linux/soc/samsung/s3c-pm.h>
 
 static struct pm_uart_save uart_save;
 
diff --git a/include/linux/soc/samsung/s3c-pm.h b/include/linux/soc/samsung/s3c-pm.h
new file mode 100644
index 000000000000..d477b314d034
--- /dev/null
+++ b/include/linux/soc/samsung/s3c-pm.h
@@ -0,0 +1,84 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *	Tomasz Figa <t.figa@samsung.com>
+ * Copyright (c) 2004 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Written by Ben Dooks, <ben@simtec.co.uk>
+ */
+
+#ifndef __SAMSUNG_SOC_S3C_PM_H
+#define __SAMSUNG_SOC_S3C_PM_H __FILE__
+
+#include <linux/types.h>
+
+/* PM debug functions */
+
+/**
+ * struct pm_uart_save - save block for core UART
+ * @ulcon: Save value for S3C2410_ULCON
+ * @ucon: Save value for S3C2410_UCON
+ * @ufcon: Save value for S3C2410_UFCON
+ * @umcon: Save value for S3C2410_UMCON
+ * @ubrdiv: Save value for S3C2410_UBRDIV
+ *
+ * Save block for UART registers to be held over sleep and restored if they
+ * are needed (say by debug).
+*/
+struct pm_uart_save {
+	u32	ulcon;
+	u32	ucon;
+	u32	ufcon;
+	u32	umcon;
+	u32	ubrdiv;
+	u32	udivslot;
+};
+
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
+/**
+ * s3c_pm_dbg() - low level debug function for use in suspend/resume.
+ * @msg: The message to print.
+ *
+ * This function is used mainly to debug the resume process before the system
+ * can rely on printk/console output. It uses the low-level debugging output
+ * routine printascii() to do its work.
+ */
+extern void s3c_pm_dbg(const char *msg, ...);
+
+#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt)
+
+extern void s3c_pm_save_uarts(bool is_s3c24xx);
+extern void s3c_pm_restore_uarts(bool is_s3c24xx);
+
+#ifdef CONFIG_ARCH_S3C64XX
+extern void s3c_pm_arch_update_uart(void __iomem *regs,
+				    struct pm_uart_save *save);
+#else
+static inline void
+s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save)
+{
+}
+#endif
+
+#else
+#define S3C_PMDBG(fmt...) pr_debug(fmt)
+
+static inline void s3c_pm_save_uarts(bool is_s3c24xx) { }
+static inline void s3c_pm_restore_uarts(bool is_s3c24xx) { }
+#endif
+
+/* suspend memory checking */
+
+#ifdef CONFIG_SAMSUNG_PM_CHECK
+extern void s3c_pm_check_prepare(void);
+extern void s3c_pm_check_restore(void);
+extern void s3c_pm_check_cleanup(void);
+extern void s3c_pm_check_store(void);
+#else
+#define s3c_pm_check_prepare() do { } while (0)
+#define s3c_pm_check_restore() do { } while (0)
+#define s3c_pm_check_cleanup() do { } while (0)
+#define s3c_pm_check_store()   do { } while (0)
+#endif
+
+#endif