diff mbox series

[11/36] ARM: s5pv210: split from plat-samsung

Message ID 20191010203043.1241612-11-arnd@arndb.de
State New
Headers show
Series None | expand

Commit Message

Arnd Bergmann Oct. 10, 2019, 8:29 p.m. UTC 
These can be build completely independently, so split
the two Kconfig symbols.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

---
 arch/arm/Kconfig.debug        | 6 +++---
 arch/arm/Makefile             | 1 -
 arch/arm/plat-samsung/Kconfig | 2 +-
 drivers/mmc/host/Kconfig      | 2 +-
 drivers/pwm/Kconfig           | 2 +-
 drivers/spi/Kconfig           | 2 +-
 drivers/tty/serial/Kconfig    | 2 +-
 sound/soc/samsung/Kconfig     | 2 +-
 8 files changed, 9 insertions(+), 10 deletions(-)

-- 
2.20.0

Comments

Krzysztof Kozlowski Oct. 23, 2019, 12:14 p.m. UTC | #1 
On Thu, Oct 10, 2019 at 10:29:55PM +0200, Arnd Bergmann wrote:
> These can be build completely independently, so split

> the two Kconfig symbols.

> 

> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

> ---

>  arch/arm/Kconfig.debug        | 6 +++---

>  arch/arm/Makefile             | 1 -

>  arch/arm/plat-samsung/Kconfig | 2 +-

>  drivers/mmc/host/Kconfig      | 2 +-

>  drivers/pwm/Kconfig           | 2 +-

>  drivers/spi/Kconfig           | 2 +-

>  drivers/tty/serial/Kconfig    | 2 +-

>  sound/soc/samsung/Kconfig     | 2 +-

>  8 files changed, 9 insertions(+), 10 deletions(-)

> 

> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug

> index 9c4f2d6deb06..4c4e97ae4fcb 100644

> --- a/arch/arm/Kconfig.debug

> +++ b/arch/arm/Kconfig.debug

> @@ -998,7 +998,7 @@ choice

>  		  via SCIFA4 on Renesas SH-Mobile AG5 (SH73A0).

>  

>  	config DEBUG_S3C_UART0

> -		depends on PLAT_SAMSUNG || ARCH_EXYNOS

> +		depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS


How are you going to select DEBUG_S5PV210_UART now?

Best regards,
Krzysztof


>  		select DEBUG_EXYNOS_UART if ARCH_EXYNOS

>  		select DEBUG_S3C24XX_UART if ARCH_S3C24XX

>  		select DEBUG_S3C64XX_UART if ARCH_S3C64XX

> @@ -1010,7 +1010,7 @@ choice

>  		  by the boot-loader before use.

>  

>  	config DEBUG_S3C_UART1

> -		depends on PLAT_SAMSUNG || ARCH_EXYNOS

> +		depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS

>  		select DEBUG_EXYNOS_UART if ARCH_EXYNOS

>  		select DEBUG_S3C24XX_UART if ARCH_S3C24XX

>  		select DEBUG_S3C64XX_UART if ARCH_S3C64XX

> @@ -1022,7 +1022,7 @@ choice

>  		  by the boot-loader before use.

>  

>  	config DEBUG_S3C_UART2

> -		depends on PLAT_SAMSUNG || ARCH_EXYNOS

> +		depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS

>  		select DEBUG_EXYNOS_UART if ARCH_EXYNOS

>  		select DEBUG_S3C24XX_UART if ARCH_S3C24XX

>  		select DEBUG_S3C64XX_UART if ARCH_S3C64XX

> diff --git a/arch/arm/Makefile b/arch/arm/Makefile

> index f492d7c338fe..a1bc15cda751 100644

> --- a/arch/arm/Makefile

> +++ b/arch/arm/Makefile

> @@ -235,7 +235,6 @@ machine-$(CONFIG_PLAT_SPEAR)		+= spear

>  # by CONFIG_* macro name.

>  plat-$(CONFIG_ARCH_OMAP)	+= omap

>  plat-$(CONFIG_ARCH_S3C64XX)	+= samsung

> -plat-$(CONFIG_ARCH_S5PV210)	+= samsung

>  plat-$(CONFIG_PLAT_ORION)	+= orion

>  plat-$(CONFIG_PLAT_PXA)		+= pxa

>  plat-$(CONFIG_PLAT_S3C24XX)	+= samsung

> diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig

> index 740bdb23f38a..1530946cc672 100644

> --- a/arch/arm/plat-samsung/Kconfig

> +++ b/arch/arm/plat-samsung/Kconfig

> @@ -4,7 +4,7 @@

>  

>  config PLAT_SAMSUNG

>  	bool

> -	depends on PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210

> +	depends on PLAT_S3C24XX || ARCH_S3C64XX

>  	default y

>  	select GENERIC_IRQ_CHIP

>  	select NO_IOPORT_MAP

> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig

> index 400a581c918c..16a0e5430b44 100644

> --- a/drivers/mmc/host/Kconfig

> +++ b/drivers/mmc/host/Kconfig

> @@ -275,7 +275,7 @@ config MMC_SDHCI_TEGRA

>  

>  config MMC_SDHCI_S3C

>  	tristate "SDHCI support on Samsung S3C SoC"

> -	depends on MMC_SDHCI && (PLAT_SAMSUNG || ARCH_EXYNOS)

> +	depends on MMC_SDHCI && (PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS)

>  	help

>  	  This selects the Secure Digital Host Controller Interface (SDHCI)

>  	  often referrered to as the HSMMC block in some of the Samsung S3C

> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig

> index e3a2518503ed..8eb738cac0c7 100644

> --- a/drivers/pwm/Kconfig

> +++ b/drivers/pwm/Kconfig

> @@ -394,7 +394,7 @@ config PWM_ROCKCHIP

>  

>  config PWM_SAMSUNG

>  	tristate "Samsung PWM support"

> -	depends on PLAT_SAMSUNG || ARCH_EXYNOS

> +	depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS

>  	help

>  	  Generic PWM framework driver for Samsung.

>  

> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig

> index 6f7fdcbb9151..355391ee643d 100644

> --- a/drivers/spi/Kconfig

> +++ b/drivers/spi/Kconfig

> @@ -625,7 +625,7 @@ config SPI_S3C24XX_FIQ

>  

>  config SPI_S3C64XX

>  	tristate "Samsung S3C64XX series type SPI"

> -	depends on (PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST)

> +	depends on (PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST)

>  	help

>  	  SPI driver for Samsung S3C64XX and newer SoCs.

>  

> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig

> index 4789b5d62f63..17f01cf3009c 100644

> --- a/drivers/tty/serial/Kconfig

> +++ b/drivers/tty/serial/Kconfig

> @@ -237,7 +237,7 @@ config SERIAL_CLPS711X_CONSOLE

>  

>  config SERIAL_SAMSUNG

>  	tristate "Samsung SoC serial support"

> -	depends on PLAT_SAMSUNG || ARCH_EXYNOS

> +	depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS

>  	select SERIAL_CORE

>  	help

>  	  Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,

> diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig

> index 638983123d8f..7a0035dd9995 100644

> --- a/sound/soc/samsung/Kconfig

> +++ b/sound/soc/samsung/Kconfig

> @@ -1,7 +1,7 @@

>  # SPDX-License-Identifier: GPL-2.0-only

>  menuconfig SND_SOC_SAMSUNG

>  	tristate "ASoC support for Samsung"

> -	depends on PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST

> +	depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST

>  	depends on COMMON_CLK

>  	select SND_SOC_GENERIC_DMAENGINE_PCM

>  	---help---

> -- 

> 2.20.0

>
Krzysztof Kozlowski Oct. 23, 2019, 2:12 p.m. UTC | #2 
On Wed, Oct 23, 2019 at 03:17:35PM +0200, Arnd Bergmann wrote:
> On Wed, Oct 23, 2019 at 2:15 PM Krzysztof Kozlowski <krzk@kernel.org> wrote:

> > On Thu, Oct 10, 2019 at 10:29:55PM +0200, Arnd Bergmann wrote:

> > > These can be build completely independently, so split

> > > the two Kconfig symbols.

> > >       config DEBUG_S3C_UART0

> > > -             depends on PLAT_SAMSUNG || ARCH_EXYNOS

> > > +             depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS

> >

> > How are you going to select DEBUG_S5PV210_UART now?

> 

> I don't see a problem here, the patch should not change the behavior at all.

> 

> The whole entry now looks like:

> 

>         config DEBUG_S3C_UART0

>                 depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS

>                 select DEBUG_EXYNOS_UART if ARCH_EXYNOS

>                 select DEBUG_S3C24XX_UART if ARCH_S3C24XX

>                 select DEBUG_S3C64XX_UART if ARCH_S3C64XX

>                 select DEBUG_S5PV210_UART if ARCH_S5PV210

>                 bool "Use Samsung S3C UART 0 for low-level debug"

> 

> so this will work as before with any of ARCH_EXYNOS, ARCH_S3C24XX,

> ARCH_S3C64XX and ARCH_S5PV210.

> 

> What am I missing?


Ah, everything is OK, I mixed up removed with added line so it looked
reversed (removal of ARCH_S5PV210).

Looks good.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 9c4f2d6deb06..4c4e97ae4fcb 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -998,7 +998,7 @@  choice
 		  via SCIFA4 on Renesas SH-Mobile AG5 (SH73A0).
 
 	config DEBUG_S3C_UART0
-		depends on PLAT_SAMSUNG || ARCH_EXYNOS
+		depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
 		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
@@ -1010,7 +1010,7 @@  choice
 		  by the boot-loader before use.
 
 	config DEBUG_S3C_UART1
-		depends on PLAT_SAMSUNG || ARCH_EXYNOS
+		depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
 		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
@@ -1022,7 +1022,7 @@  choice
 		  by the boot-loader before use.
 
 	config DEBUG_S3C_UART2
-		depends on PLAT_SAMSUNG || ARCH_EXYNOS
+		depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
 		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index f492d7c338fe..a1bc15cda751 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -235,7 +235,6 @@  machine-$(CONFIG_PLAT_SPEAR)		+= spear
 # by CONFIG_* macro name.
 plat-$(CONFIG_ARCH_OMAP)	+= omap
 plat-$(CONFIG_ARCH_S3C64XX)	+= samsung
-plat-$(CONFIG_ARCH_S5PV210)	+= samsung
 plat-$(CONFIG_PLAT_ORION)	+= orion
 plat-$(CONFIG_PLAT_PXA)		+= pxa
 plat-$(CONFIG_PLAT_S3C24XX)	+= samsung
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 740bdb23f38a..1530946cc672 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -4,7 +4,7 @@ 
 
 config PLAT_SAMSUNG
 	bool
-	depends on PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
+	depends on PLAT_S3C24XX || ARCH_S3C64XX
 	default y
 	select GENERIC_IRQ_CHIP
 	select NO_IOPORT_MAP
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 400a581c918c..16a0e5430b44 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -275,7 +275,7 @@  config MMC_SDHCI_TEGRA
 
 config MMC_SDHCI_S3C
 	tristate "SDHCI support on Samsung S3C SoC"
-	depends on MMC_SDHCI && (PLAT_SAMSUNG || ARCH_EXYNOS)
+	depends on MMC_SDHCI && (PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS)
 	help
 	  This selects the Secure Digital Host Controller Interface (SDHCI)
 	  often referrered to as the HSMMC block in some of the Samsung S3C
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index e3a2518503ed..8eb738cac0c7 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -394,7 +394,7 @@  config PWM_ROCKCHIP
 
 config PWM_SAMSUNG
 	tristate "Samsung PWM support"
-	depends on PLAT_SAMSUNG || ARCH_EXYNOS
+	depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
 	help
 	  Generic PWM framework driver for Samsung.
 
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 6f7fdcbb9151..355391ee643d 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -625,7 +625,7 @@  config SPI_S3C24XX_FIQ
 
 config SPI_S3C64XX
 	tristate "Samsung S3C64XX series type SPI"
-	depends on (PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST)
+	depends on (PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST)
 	help
 	  SPI driver for Samsung S3C64XX and newer SoCs.
 
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 4789b5d62f63..17f01cf3009c 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -237,7 +237,7 @@  config SERIAL_CLPS711X_CONSOLE
 
 config SERIAL_SAMSUNG
 	tristate "Samsung SoC serial support"
-	depends on PLAT_SAMSUNG || ARCH_EXYNOS
+	depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
 	select SERIAL_CORE
 	help
 	  Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index 638983123d8f..7a0035dd9995 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -1,7 +1,7 @@ 
 # SPDX-License-Identifier: GPL-2.0-only
 menuconfig SND_SOC_SAMSUNG
 	tristate "ASoC support for Samsung"
-	depends on PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST
+	depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
 	depends on COMMON_CLK
 	select SND_SOC_GENERIC_DMAENGINE_PCM
 	---help---