| Message ID | 20200414112754.3365406-1-p.puschmann@pironex.de |
|---|---|
| State | Accepted |
| Commit | 9df8ba7c63073508e5aa677dade48fcab6a6773e |
| Headers | show |
| Series | ASoC: tas571x: disable regulators on failed probe | expand |
On Tue, Apr 14, 2020 at 01:27:54PM +0200, Philipp Puschmann wrote: > If probe fails after enabling the regulators regulator_put is called for > each supply without having them disabled before. This produces some > warnings like > > WARNING: CPU: 0 PID: 90 at drivers/regulator/core.c:2044 _regulator_put.part.0+0x154/0x15c > [<c010f7a8>] (unwind_backtrace) from [<c010c544>] (show_stack+0x10/0x14) > [<c010c544>] (show_stack) from [<c012b640>] (__warn+0xd0/0xf4) > [<c012b640>] (__warn) from [<c012b9b4>] (warn_slowpath_fmt+0x64/0xc4) > [<c012b9b4>] (warn_slowpath_fmt) from [<c04c4064>] (_regulator_put.part.0+0x154/0x15c) Please think hard before including complete backtraces in upstream reports, they are very large and contain almost no useful information relative to their size so often obscure the relevant content in your message. If part of the backtrace is usefully illustrative (it often is for search engines if nothing else) then it's usually better to pull out the relevant sections.
diff --git a/sound/soc/codecs/tas571x.c b/sound/soc/codecs/tas571x.c index 1554631cb397..5b7f9fcf6cbf 100644 --- a/sound/soc/codecs/tas571x.c +++ b/sound/soc/codecs/tas571x.c @@ -820,8 +820,10 @@ static int tas571x_i2c_probe(struct i2c_client *client, priv->regmap = devm_regmap_init(dev, NULL, client, priv->chip->regmap_config); - if (IS_ERR(priv->regmap)) - return PTR_ERR(priv->regmap); + if (IS_ERR(priv->regmap)) { + ret = PTR_ERR(priv->regmap); + goto disable_regs; + } priv->pdn_gpio = devm_gpiod_get_optional(dev, "pdn", GPIOD_OUT_LOW); if (IS_ERR(priv->pdn_gpio)) { @@ -845,7 +847,7 @@ static int tas571x_i2c_probe(struct i2c_client *client, ret = regmap_write(priv->regmap, TAS571X_OSC_TRIM_REG, 0); if (ret) - return ret; + goto disable_regs; usleep_range(50000, 60000); @@ -861,12 +863,20 @@ static int tas571x_i2c_probe(struct i2c_client *client, */ ret = regmap_update_bits(priv->regmap, TAS571X_MVOL_REG, 1, 0); if (ret) - return ret; + goto disable_regs; } - return devm_snd_soc_register_component(&client->dev, + ret = devm_snd_soc_register_component(&client->dev, &priv->component_driver, &tas571x_dai, 1); + if (ret) + goto disable_regs; + + return ret; + +disable_regs: + regulator_bulk_disable(priv->chip->num_supply_names, priv->supplies); + return ret; } static int tas571x_i2c_remove(struct i2c_client *client)
If probe fails after enabling the regulators regulator_put is called for each supply without having them disabled before. This produces some warnings like WARNING: CPU: 0 PID: 90 at drivers/regulator/core.c:2044 _regulator_put.part.0+0x154/0x15c [<c010f7a8>] (unwind_backtrace) from [<c010c544>] (show_stack+0x10/0x14) [<c010c544>] (show_stack) from [<c012b640>] (__warn+0xd0/0xf4) [<c012b640>] (__warn) from [<c012b9b4>] (warn_slowpath_fmt+0x64/0xc4) [<c012b9b4>] (warn_slowpath_fmt) from [<c04c4064>] (_regulator_put.part.0+0x154/0x15c) [<c04c4064>] (_regulator_put.part.0) from [<c04c4094>] (regulator_put+0x28/0x38) [<c04c4094>] (regulator_put) from [<c04c40cc>] (regulator_bulk_free+0x28/0x38) [<c04c40cc>] (regulator_bulk_free) from [<c0579b2c>] (release_nodes+0x1d0/0x22c) [<c0579b2c>] (release_nodes) from [<c05756dc>] (really_probe+0x108/0x34c) [<c05756dc>] (really_probe) from [<c0575aec>] (driver_probe_device+0xb8/0x16c) [<c0575aec>] (driver_probe_device) from [<c0575d40>] (device_driver_attach+0x58/0x60) [<c0575d40>] (device_driver_attach) from [<c0575da0>] (__driver_attach+0x58/0xcc) [<c0575da0>] (__driver_attach) from [<c0573978>] (bus_for_each_dev+0x78/0xc0) [<c0573978>] (bus_for_each_dev) from [<c0574b5c>] (bus_add_driver+0x188/0x1e0) [<c0574b5c>] (bus_add_driver) from [<c05768b0>] (driver_register+0x74/0x108) [<c05768b0>] (driver_register) from [<c061ab7c>] (i2c_register_driver+0x3c/0x88) [<c061ab7c>] (i2c_register_driver) from [<c0102df8>] (do_one_initcall+0x58/0x250) [<c0102df8>] (do_one_initcall) from [<c01a91bc>] (do_init_module+0x60/0x244) [<c01a91bc>] (do_init_module) from [<c01ab5a4>] (load_module+0x2180/0x2540) [<c01ab5a4>] (load_module) from [<c01abbd4>] (sys_finit_module+0xd0/0xe8) [<c01abbd4>] (sys_finit_module) from [<c01011e0>] (__sys_trace_return+0x0/0x20) Fixes: 3fd6e7d9a146 (ASoC: tas571x: New driver for TI TAS571x power amplifiers) Signed-off-by: Philipp Puschmann <p.puschmann@pironex.de> --- sound/soc/codecs/tas571x.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-)