@@ -1181,6 +1181,7 @@ config I2C_RCAR
tristate "Renesas R-Car I2C Controller"
depends on ARCH_RENESAS || COMPILE_TEST
select I2C_SLAVE
+ select I2C_SMBUS
select RESET_CONTROLLER if ARCH_RCAR_GEN3
help
If you say yes to this option, support will be included for the
@@ -21,6 +21,7 @@
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_device.h>
@@ -106,10 +107,11 @@
#define ID_ARBLOST (1 << 3)
#define ID_NACK (1 << 4)
/* persistent flags */
+#define ID_P_HOST_NOTIFY BIT(28)
#define ID_P_REP_AFTER_RD BIT(29)
#define ID_P_NO_RXDMA BIT(30) /* HW forbids RXDMA sometimes */
#define ID_P_PM_BLOCKED BIT(31)
-#define ID_P_MASK GENMASK(31, 29)
+#define ID_P_MASK GENMASK(31, 28)
enum rcar_i2c_type {
I2C_RCAR_GEN1,
@@ -141,6 +143,8 @@ struct rcar_i2c_priv {
struct reset_control *rstc;
int irq;
+
+ struct i2c_client *host_notify_client;
};
#define rcar_i2c_priv_to_dev(p) ((p)->adap.dev.parent)
@@ -876,14 +880,21 @@ static int rcar_unreg_slave(struct i2c_client *slave)
static u32 rcar_i2c_func(struct i2c_adapter *adap)
{
+ struct rcar_i2c_priv *priv = i2c_get_adapdata(adap);
+
/*
* This HW can't do:
* I2C_SMBUS_QUICK (setting FSB during START didn't work)
* I2C_M_NOSTART (automatically sends address after START)
* I2C_M_IGNORE_NAK (automatically sends STOP after NAK)
*/
- return I2C_FUNC_I2C | I2C_FUNC_SLAVE |
- (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
+ u32 func = I2C_FUNC_I2C | I2C_FUNC_SLAVE |
+ (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
+
+ if (priv->flags & ID_P_HOST_NOTIFY)
+ func |= I2C_FUNC_SMBUS_HOST_NOTIFY;
+
+ return func;
}
static const struct i2c_algorithm rcar_i2c_algo = {
@@ -983,6 +994,8 @@ static int rcar_i2c_probe(struct platform_device *pdev)
else
pm_runtime_put(dev);
+ if (of_property_read_bool(dev->of_node, "smbus"))
+ priv->flags |= ID_P_HOST_NOTIFY;
priv->irq = platform_get_irq(pdev, 0);
ret = devm_request_irq(dev, priv->irq, rcar_i2c_irq, 0, dev_name(dev), priv);
@@ -997,10 +1010,20 @@ static int rcar_i2c_probe(struct platform_device *pdev)
if (ret < 0)
goto out_pm_disable;
+ if (priv->flags & ID_P_HOST_NOTIFY) {
+ priv->host_notify_client = i2c_new_slave_host_notify_device(adap);
+ if (IS_ERR(priv->host_notify_client)) {
+ ret = PTR_ERR(priv->host_notify_client);
+ goto out_del_device;
+ }
+ }
+
dev_info(dev, "probed\n");
return 0;
+ out_del_device:
+ i2c_del_adapter(&priv->adap);
out_pm_put:
pm_runtime_put(dev);
out_pm_disable:
@@ -1013,6 +1036,8 @@ static int rcar_i2c_remove(struct platform_device *pdev)
struct rcar_i2c_priv *priv = platform_get_drvdata(pdev);
struct device *dev = &pdev->dev;
+ if (priv->host_notify_client)
+ i2c_free_slave_host_notify_device(priv->host_notify_client);
i2c_del_adapter(&priv->adap);
rcar_i2c_release_dma(priv);
if (priv->flags & ID_P_PM_BLOCKED)
The I2C core can now utilize a slave interface to handle SMBus HostNotify events. Enable it in this driver. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> --- Changes since RFC: - adapted name of the binding and the core helpers to the latest version which got upstream now - select 'I2C_SMBUS' because helper code was moved there (it could be discussed if this is optional depending if HostNotify is needed, but this is subsystem wide and, thus, a seperate patch) - better var name for the used client - unregistration in 'remove' is now before deleting adapter drivers/i2c/busses/Kconfig | 1 + drivers/i2c/busses/i2c-rcar.c | 31 ++++++++++++++++++++++++++++--- 2 files changed, 29 insertions(+), 3 deletions(-)