@@ -11,5 +11,6 @@ headers = files('rte_ring.h',
'rte_ring_hts_c11_mem.h',
'rte_ring_peek.h',
'rte_ring_peek_c11_mem.h',
+ 'rte_ring_peek_zc.h',
'rte_ring_rts.h',
'rte_ring_rts_c11_mem.h')
@@ -1079,6 +1079,7 @@ rte_ring_dequeue_burst_elem(struct rte_ring *r, void *obj_table,
#ifdef ALLOW_EXPERIMENTAL_API
#include <rte_ring_peek.h>
+#include <rte_ring_peek_zc.h>
#endif
#include <rte_ring.h>
new file mode 100644
@@ -0,0 +1,548 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ *
+ * Copyright (c) 2020 Arm Limited
+ * Copyright (c) 2007-2009 Kip Macy kmacy@freebsd.org
+ * All rights reserved.
+ * Derived from FreeBSD's bufring.h
+ * Used as BSD-3 Licensed with permission from Kip Macy.
+ */
+
+#ifndef _RTE_RING_PEEK_ZC_H_
+#define _RTE_RING_PEEK_ZC_H_
+
+/**
+ * @file
+ * @b EXPERIMENTAL: this API may change without prior notice
+ * It is not recommended to include this file directly.
+ * Please include <rte_ring_elem.h> instead.
+ *
+ * Ring Peek Zero Copy APIs
+ * These APIs make it possible to split public enqueue/dequeue API
+ * into 3 parts:
+ * - enqueue/dequeue start
+ * - copy data to/from the ring
+ * - enqueue/dequeue finish
+ * Along with the advantages of the peek APIs, these APIs provide the ability
+ * to avoid copying of the data to temporary area (for ex: array of mbufs
+ * on the stack).
+ *
+ * Note that currently these APIs are available only for two sync modes:
+ * 1) Single Producer/Single Consumer (RTE_RING_SYNC_ST)
+ * 2) Serialized Producer/Serialized Consumer (RTE_RING_SYNC_MT_HTS).
+ * It is user's responsibility to create/init ring with appropriate sync
+ * modes selected.
+ *
+ * Following are some examples showing the API usage.
+ * 1)
+ * struct elem_obj {uint64_t a; uint32_t b, c;};
+ * struct elem_obj *obj;
+ *
+ * // Create ring with sync type RTE_RING_SYNC_ST or RTE_RING_SYNC_MT_HTS
+ * // Reserve space on the ring
+ * n = rte_ring_enqueue_zc_bulk_elem_start(r, sizeof(elem_obj), 1, &zcd, NULL);
+ *
+ * // Produce the data directly on the ring memory
+ * obj = (struct elem_obj *)zcd->ptr1;
+ * obj->a = rte_get_a();
+ * obj->b = rte_get_b();
+ * obj->c = rte_get_c();
+ * rte_ring_enqueue_zc_elem_finish(ring, n);
+ *
+ * 2)
+ * // Create ring with sync type RTE_RING_SYNC_ST or RTE_RING_SYNC_MT_HTS
+ * // Reserve space on the ring
+ * n = rte_ring_enqueue_zc_burst_start(r, 32, &zcd, NULL);
+ *
+ * // Pkt I/O core polls packets from the NIC
+ * if (n != 0) {
+ * nb_rx = rte_eth_rx_burst(portid, queueid, zcd->ptr1, zcd->n1);
+ * if (nb_rx == zcd->n1 && n != zcd->n1)
+ * nb_rx = rte_eth_rx_burst(portid, queueid,
+ * zcd->ptr2, n - zcd->n1);
+ *
+ * // Provide packets to the packet processing cores
+ * rte_ring_enqueue_zc_finish(r, nb_rx);
+ * }
+ *
+ * Note that between _start_ and _finish_ none other thread can proceed
+ * with enqueue/dequeue operation till _finish_ completes.
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <rte_ring_peek_c11_mem.h>
+
+/**
+ * Ring zero-copy information structure.
+ *
+ * This structure contains the pointers and length of the space
+ * reserved on the ring storage.
+ */
+struct rte_ring_zc_data {
+ /* Pointer to the first space in the ring */
+ void *ptr1;
+ /* Pointer to the second space in the ring if there is wrap-around.
+ * It contains valid value only if wrap-around happens.
+ */
+ void *ptr2;
+ /* Number of elements in the first pointer. If this is equal to
+ * the number of elements requested, then ptr2 is NULL.
+ * Otherwise, subtracting n1 from number of elements requested
+ * will give the number of elements available at ptr2.
+ */
+ unsigned int n1;
+} __rte_cache_aligned;
+
+static __rte_always_inline void
+__rte_ring_get_elem_addr(struct rte_ring *r, uint32_t head,
+ uint32_t esize, uint32_t num, void **dst1, uint32_t *n1, void **dst2)
+{
+ uint32_t idx, scale, nr_idx;
+ uint32_t *ring = (uint32_t *)&r[1];
+
+ /* Normalize to uint32_t */
+ scale = esize / sizeof(uint32_t);
+ idx = head & r->mask;
+ nr_idx = idx * scale;
+
+ *dst1 = ring + nr_idx;
+ *n1 = num;
+
+ if (idx + num > r->size) {
+ *n1 = r->size - idx;
+ *dst2 = ring;
+ } else {
+ *dst2 = NULL;
+ }
+}
+
+/**
+ * @internal This function moves prod head value.
+ */
+static __rte_always_inline unsigned int
+__rte_ring_do_enqueue_zc_elem_start(struct rte_ring *r, unsigned int esize,
+ uint32_t n, enum rte_ring_queue_behavior behavior,
+ struct rte_ring_zc_data *zcd, unsigned int *free_space)
+{
+ uint32_t free, head, next;
+
+ switch (r->prod.sync_type) {
+ case RTE_RING_SYNC_ST:
+ n = __rte_ring_move_prod_head(r, RTE_RING_SYNC_ST, n,
+ behavior, &head, &next, &free);
+ break;
+ case RTE_RING_SYNC_MT_HTS:
+ n = __rte_ring_hts_move_prod_head(r, n, behavior, &head, &free);
+ break;
+ case RTE_RING_SYNC_MT:
+ case RTE_RING_SYNC_MT_RTS:
+ default:
+ /* unsupported mode, shouldn't be here */
+ RTE_ASSERT(0);
+ n = 0;
+ free = 0;
+ return n;
+ }
+
+ __rte_ring_get_elem_addr(r, head, esize, n, &zcd->ptr1,
+ &zcd->n1, &zcd->ptr2);
+
+ if (free_space != NULL)
+ *free_space = free - n;
+ return n;
+}
+
+/**
+ * Start to enqueue several objects on the ring.
+ * Note that no actual objects are put in the queue by this function,
+ * it just reserves space for the user on the ring.
+ * User has to copy objects into the queue using the returned pointers.
+ * User should call rte_ring_enqueue_zc_elem_finish to complete the
+ * enqueue operation.
+ *
+ * @param r
+ * A pointer to the ring structure.
+ * @param esize
+ * The size of ring element, in bytes. It must be a multiple of 4.
+ * @param n
+ * The number of objects to add in the ring.
+ * @param zcd
+ * Structure containing the pointers and length of the space
+ * reserved on the ring storage.
+ * @param free_space
+ * If non-NULL, returns the amount of space in the ring after the
+ * reservation operation has finished.
+ * @return
+ * The number of objects that can be enqueued, either 0 or n
+ */
+__rte_experimental
+static __rte_always_inline unsigned int
+rte_ring_enqueue_zc_bulk_elem_start(struct rte_ring *r, unsigned int esize,
+ unsigned int n, struct rte_ring_zc_data *zcd, unsigned int *free_space)
+{
+ return __rte_ring_do_enqueue_zc_elem_start(r, esize, n,
+ RTE_RING_QUEUE_FIXED, zcd, free_space);
+}
+
+/**
+ * Start to enqueue several pointers to objects on the ring.
+ * Note that no actual pointers are put in the queue by this function,
+ * it just reserves space for the user on the ring.
+ * User has to copy pointers to objects into the queue using the
+ * returned pointers.
+ * User should call rte_ring_enqueue_zc_finish to complete the
+ * enqueue operation.
+ *
+ * @param r
+ * A pointer to the ring structure.
+ * @param n
+ * The number of objects to add in the ring.
+ * @param zcd
+ * Structure containing the pointers and length of the space
+ * reserved on the ring storage.
+ * @param free_space
+ * If non-NULL, returns the amount of space in the ring after the
+ * reservation operation has finished.
+ * @return
+ * The number of objects that can be enqueued, either 0 or n
+ */
+__rte_experimental
+static __rte_always_inline unsigned int
+rte_ring_enqueue_zc_bulk_start(struct rte_ring *r, unsigned int n,
+ struct rte_ring_zc_data *zcd, unsigned int *free_space)
+{
+ return rte_ring_enqueue_zc_bulk_elem_start(r, sizeof(uintptr_t), n,
+ zcd, free_space);
+}
+/**
+ * Start to enqueue several objects on the ring.
+ * Note that no actual objects are put in the queue by this function,
+ * it just reserves space for the user on the ring.
+ * User has to copy objects into the queue using the returned pointers.
+ * User should call rte_ring_enqueue_zc_elem_finish to complete the
+ * enqueue operation.
+ *
+ * @param r
+ * A pointer to the ring structure.
+ * @param esize
+ * The size of ring element, in bytes. It must be a multiple of 4.
+ * @param n
+ * The number of objects to add in the ring.
+ * @param zcd
+ * Structure containing the pointers and length of the space
+ * reserved on the ring storage.
+ * @param free_space
+ * If non-NULL, returns the amount of space in the ring after the
+ * reservation operation has finished.
+ * @return
+ * The number of objects that can be enqueued, either 0 or n
+ */
+__rte_experimental
+static __rte_always_inline unsigned int
+rte_ring_enqueue_zc_burst_elem_start(struct rte_ring *r, unsigned int esize,
+ unsigned int n, struct rte_ring_zc_data *zcd, unsigned int *free_space)
+{
+ return __rte_ring_do_enqueue_zc_elem_start(r, esize, n,
+ RTE_RING_QUEUE_VARIABLE, zcd, free_space);
+}
+
+/**
+ * Start to enqueue several pointers to objects on the ring.
+ * Note that no actual pointers are put in the queue by this function,
+ * it just reserves space for the user on the ring.
+ * User has to copy pointers to objects into the queue using the
+ * returned pointers.
+ * User should call rte_ring_enqueue_zc_finish to complete the
+ * enqueue operation.
+ *
+ * @param r
+ * A pointer to the ring structure.
+ * @param n
+ * The number of objects to add in the ring.
+ * @param zcd
+ * Structure containing the pointers and length of the space
+ * reserved on the ring storage.
+ * @param free_space
+ * If non-NULL, returns the amount of space in the ring after the
+ * reservation operation has finished.
+ * @return
+ * The number of objects that can be enqueued, either 0 or n
+ */
+__rte_experimental
+static __rte_always_inline unsigned int
+rte_ring_enqueue_zc_burst_start(struct rte_ring *r, unsigned int n,
+ struct rte_ring_zc_data *zcd, unsigned int *free_space)
+{
+ return rte_ring_enqueue_zc_burst_elem_start(r, sizeof(uintptr_t), n,
+ zcd, free_space);
+}
+
+/**
+ * Complete enqueuing several objects on the ring.
+ * Note that number of objects to enqueue should not exceed previous
+ * enqueue_start return value.
+ *
+ * @param r
+ * A pointer to the ring structure.
+ * @param n
+ * The number of objects to add to the ring.
+ */
+__rte_experimental
+static __rte_always_inline void
+rte_ring_enqueue_zc_elem_finish(struct rte_ring *r, unsigned int n)
+{
+ uint32_t tail;
+
+ switch (r->prod.sync_type) {
+ case RTE_RING_SYNC_ST:
+ n = __rte_ring_st_get_tail(&r->prod, &tail, n);
+ __rte_ring_st_set_head_tail(&r->prod, tail, n, 1);
+ break;
+ case RTE_RING_SYNC_MT_HTS:
+ n = __rte_ring_hts_get_tail(&r->hts_prod, &tail, n);
+ __rte_ring_hts_set_head_tail(&r->hts_prod, tail, n, 1);
+ break;
+ case RTE_RING_SYNC_MT:
+ case RTE_RING_SYNC_MT_RTS:
+ default:
+ /* unsupported mode, shouldn't be here */
+ RTE_ASSERT(0);
+ }
+}
+
+/**
+ * Complete enqueuing several pointers to objects on the ring.
+ * Note that number of objects to enqueue should not exceed previous
+ * enqueue_start return value.
+ *
+ * @param r
+ * A pointer to the ring structure.
+ * @param n
+ * The number of pointers to objects to add to the ring.
+ */
+__rte_experimental
+static __rte_always_inline void
+rte_ring_enqueue_zc_finish(struct rte_ring *r, unsigned int n)
+{
+ rte_ring_enqueue_zc_elem_finish(r, n);
+}
+
+/**
+ * @internal This function moves cons head value and copies up to *n*
+ * objects from the ring to the user provided obj_table.
+ */
+static __rte_always_inline unsigned int
+__rte_ring_do_dequeue_zc_elem_start(struct rte_ring *r,
+ uint32_t esize, uint32_t n, enum rte_ring_queue_behavior behavior,
+ struct rte_ring_zc_data *zcd, unsigned int *available)
+{
+ uint32_t avail, head, next;
+
+ switch (r->cons.sync_type) {
+ case RTE_RING_SYNC_ST:
+ n = __rte_ring_move_cons_head(r, RTE_RING_SYNC_ST, n,
+ behavior, &head, &next, &avail);
+ break;
+ case RTE_RING_SYNC_MT_HTS:
+ n = __rte_ring_hts_move_cons_head(r, n, behavior,
+ &head, &avail);
+ break;
+ case RTE_RING_SYNC_MT:
+ case RTE_RING_SYNC_MT_RTS:
+ default:
+ /* unsupported mode, shouldn't be here */
+ RTE_ASSERT(0);
+ n = 0;
+ avail = 0;
+ return n;
+ }
+
+ __rte_ring_get_elem_addr(r, head, esize, n, &zcd->ptr1,
+ &zcd->n1, &zcd->ptr2);
+
+ if (available != NULL)
+ *available = avail - n;
+ return n;
+}
+
+/**
+ * Start to dequeue several objects from the ring.
+ * Note that no actual objects are copied from the queue by this function.
+ * User has to copy objects from the queue using the returned pointers.
+ * User should call rte_ring_dequeue_zc_elem_finish to complete the
+ * dequeue operation.
+ *
+ * @param r
+ * A pointer to the ring structure.
+ * @param esize
+ * The size of ring element, in bytes. It must be a multiple of 4.
+ * @param n
+ * The number of objects to remove from the ring.
+ * @param zcd
+ * Structure containing the pointers and length of the space
+ * reserved on the ring storage.
+ * @param available
+ * If non-NULL, returns the number of remaining ring entries after the
+ * dequeue has finished.
+ * @return
+ * The number of objects that can be dequeued, either 0 or n
+ */
+__rte_experimental
+static __rte_always_inline unsigned int
+rte_ring_dequeue_zc_bulk_elem_start(struct rte_ring *r, unsigned int esize,
+ unsigned int n, struct rte_ring_zc_data *zcd, unsigned int *available)
+{
+ return __rte_ring_do_dequeue_zc_elem_start(r, esize, n,
+ RTE_RING_QUEUE_FIXED, zcd, available);
+}
+
+/**
+ * Start to dequeue several pointers to objects from the ring.
+ * Note that no actual pointers are removed from the queue by this function.
+ * User has to copy pointers to objects from the queue using the
+ * returned pointers.
+ * User should call rte_ring_dequeue_zc_finish to complete the
+ * dequeue operation.
+ *
+ * @param r
+ * A pointer to the ring structure.
+ * @param n
+ * The number of objects to remove from the ring.
+ * @param zcd
+ * Structure containing the pointers and length of the space
+ * reserved on the ring storage.
+ * @param available
+ * If non-NULL, returns the number of remaining ring entries after the
+ * dequeue has finished.
+ * @return
+ * The number of objects that can be dequeued, either 0 or n
+ */
+__rte_experimental
+static __rte_always_inline unsigned int
+rte_ring_dequeue_zc_bulk_start(struct rte_ring *r, unsigned int n,
+ struct rte_ring_zc_data *zcd, unsigned int *available)
+{
+ return rte_ring_dequeue_zc_bulk_elem_start(r, sizeof(uintptr_t),
+ n, zcd, available);
+}
+
+/**
+ * Start to dequeue several objects from the ring.
+ * Note that no actual objects are copied from the queue by this function.
+ * User has to copy objects from the queue using the returned pointers.
+ * User should call rte_ring_dequeue_zc_elem_finish to complete the
+ * dequeue operation.
+ *
+ * @param r
+ * A pointer to the ring structure.
+ * @param esize
+ * The size of ring element, in bytes. It must be a multiple of 4.
+ * This must be the same value used while creating the ring. Otherwise
+ * the results are undefined.
+ * @param n
+ * The number of objects to dequeue from the ring.
+ * @param zcd
+ * Structure containing the pointers and length of the space
+ * reserved on the ring storage.
+ * @param available
+ * If non-NULL, returns the number of remaining ring entries after the
+ * dequeue has finished.
+ * @return
+ * The number of objects that can be dequeued, either 0 or n
+ */
+__rte_experimental
+static __rte_always_inline unsigned int
+rte_ring_dequeue_zc_burst_elem_start(struct rte_ring *r, unsigned int esize,
+ unsigned int n, struct rte_ring_zc_data *zcd, unsigned int *available)
+{
+ return __rte_ring_do_dequeue_zc_elem_start(r, esize, n,
+ RTE_RING_QUEUE_VARIABLE, zcd, available);
+}
+
+/**
+ * Start to dequeue several pointers to objects from the ring.
+ * Note that no actual pointers are removed from the queue by this function.
+ * User has to copy pointers to objects from the queue using the
+ * returned pointers.
+ * User should call rte_ring_dequeue_zc_finish to complete the
+ * dequeue operation.
+ *
+ * @param r
+ * A pointer to the ring structure.
+ * @param n
+ * The number of objects to remove from the ring.
+ * @param zcd
+ * Structure containing the pointers and length of the space
+ * reserved on the ring storage.
+ * @param available
+ * If non-NULL, returns the number of remaining ring entries after the
+ * dequeue has finished.
+ * @return
+ * The number of objects that can be dequeued, either 0 or n
+ */
+__rte_experimental
+static __rte_always_inline unsigned int
+rte_ring_dequeue_zc_burst_start(struct rte_ring *r, unsigned int n,
+ struct rte_ring_zc_data *zcd, unsigned int *available)
+{
+ return rte_ring_dequeue_zc_burst_elem_start(r, sizeof(uintptr_t), n,
+ zcd, available);
+}
+
+/**
+ * Complete dequeuing several objects from the ring.
+ * Note that number of objects to dequeued should not exceed previous
+ * dequeue_start return value.
+ *
+ * @param r
+ * A pointer to the ring structure.
+ * @param n
+ * The number of objects to remove from the ring.
+ */
+__rte_experimental
+static __rte_always_inline void
+rte_ring_dequeue_zc_elem_finish(struct rte_ring *r, unsigned int n)
+{
+ uint32_t tail;
+
+ switch (r->cons.sync_type) {
+ case RTE_RING_SYNC_ST:
+ n = __rte_ring_st_get_tail(&r->cons, &tail, n);
+ __rte_ring_st_set_head_tail(&r->cons, tail, n, 0);
+ break;
+ case RTE_RING_SYNC_MT_HTS:
+ n = __rte_ring_hts_get_tail(&r->hts_cons, &tail, n);
+ __rte_ring_hts_set_head_tail(&r->hts_cons, tail, n, 0);
+ break;
+ case RTE_RING_SYNC_MT:
+ case RTE_RING_SYNC_MT_RTS:
+ default:
+ /* unsupported mode, shouldn't be here */
+ RTE_ASSERT(0);
+ }
+}
+
+/**
+ * Complete dequeuing several objects from the ring.
+ * Note that number of objects to dequeued should not exceed previous
+ * dequeue_start return value.
+ *
+ * @param r
+ * A pointer to the ring structure.
+ * @param n
+ * The number of objects to remove from the ring.
+ */
+__rte_experimental
+static __rte_always_inline void
+rte_ring_dequeue_zc_finish(struct rte_ring *r, unsigned int n)
+{
+ rte_ring_dequeue_elem_finish(r, n);
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_RING_PEEK_ZC_H_ */