| Message ID | 20201102101154.13598-2-kishon@ti.com |
|---|---|
| State | New |
| Headers | show |
| Series | J7200: Add PCIe DT nodes to Enable PCIe | expand |
On Mon, Nov 02, 2020 at 03:41:47PM +0530, Kishon Vijay Abraham I wrote: > Add binding documentation for "pcie-ctrl" which should be a subnode of > the system controller. > > Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> > --- > .../devicetree/bindings/mfd/ti,j721e-system-controller.yaml | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml > index 19fcf59fd2fe..fd985794e419 100644 > --- a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml > +++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml > @@ -50,6 +50,12 @@ patternProperties: > specified in > Documentation/devicetree/bindings/mux/reg-mux.txt > > + "^pcie-ctrl@[0-9a-f]+$": Unit address, so it should have 'reg' too? You don't need a node if there aren't any properties. > + type: object > + description: | > + This is the PCIe controller configuration required to configre PCIe > + mode, lane width and speed. > + > required: > - compatible > - reg > -- > 2.17.1 >
Hi Rob, On 05/11/20 10:24 pm, Rob Herring wrote: > On Mon, Nov 02, 2020 at 03:41:47PM +0530, Kishon Vijay Abraham I wrote: >> Add binding documentation for "pcie-ctrl" which should be a subnode of >> the system controller. >> >> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> >> --- >> .../devicetree/bindings/mfd/ti,j721e-system-controller.yaml | 6 ++++++ >> 1 file changed, 6 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml >> index 19fcf59fd2fe..fd985794e419 100644 >> --- a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml >> +++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml >> @@ -50,6 +50,12 @@ patternProperties: >> specified in >> Documentation/devicetree/bindings/mux/reg-mux.txt >> >> + "^pcie-ctrl@[0-9a-f]+$": > > Unit address, so it should have 'reg' too? > > You don't need a node if there aren't any properties. The subnodes are again a syscon node. I'll fix this up in the next revision. Thank You, Kishon
diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml index 19fcf59fd2fe..fd985794e419 100644 --- a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml @@ -50,6 +50,12 @@ patternProperties: specified in Documentation/devicetree/bindings/mux/reg-mux.txt + "^pcie-ctrl@[0-9a-f]+$": + type: object + description: | + This is the PCIe controller configuration required to configre PCIe + mode, lane width and speed. + required: - compatible - reg
Add binding documentation for "pcie-ctrl" which should be a subnode of the system controller. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> --- .../devicetree/bindings/mfd/ti,j721e-system-controller.yaml | 6 ++++++ 1 file changed, 6 insertions(+) -- 2.17.1