[v5,1/2] video: ARM CLCD: Add DT support

Message ID	1394036606-17784-1-git-send-email-pawel.moll@arm.com
State	New
Headers	show Return-Path: <patchwork-forward+bncBDV43YEW6EKBBEM73WMAKGQEHFCMPSI@linaro.org> MIME-Version: 1.0 Received-SPF: neutral (google.com: 209.85.128.173 is neither permitted nor denied by best guess record for domain of patch+caf_=patchwork-forward=linaro.org@linaro.org) client-ip=209.85.128.173; Received-SPF: pass (google.com: best guess record for domain of linux-fbdev-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; From: Pawel Moll <pawel.moll@arm.com> To: linux-fbdev@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: Will Deacon <Will.Deacon@arm.com>, Jonathan Austin <Jonathan.Austin@arm.com>, Arnd Bergmann <arnd@arndb.de>, Linus Walleij <linus.walleij@linaro.org>, Mark Rutland <mark.rutland@arm.com>, Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>, Tomi Valkeinen <tomi.valkeinen@ti.com>, Russell King <linux@arm.linux.org.uk>, Pawel Moll <pawel.moll@arm.com> Subject: [PATCH v5 1/2] video: ARM CLCD: Add DT support Date: Wed, 5 Mar 2014 16:23:25 +0000 Message-Id: <1394036606-17784-1-git-send-email-pawel.moll@arm.com> Sender: linux-fbdev-owner@vger.kernel.org Precedence: list Mailing-list: list patchwork-forward@linaro.org; contact patchwork-forward+owners@linaro.org

diff --git a/Documentation/devicetree/bindings/video/arm,pl11x.txt b/Documentation/devicetree/bindings/video/arm,pl11x.txt new file mode 100644 index 0000000..75da7b7 --- /dev/null +++ b/Documentation/devicetree/bindings/video/arm,pl11x.txt @@ -0,0 +1,83 @@ +* ARM PrimeCell Color LCD Controller PL110/PL111 + +See also Documentation/devicetree/bindings/arm/primecell.txt + +Required properties: + +- compatible: must be one of: + "arm,pl110", "arm,primecell" + "arm,pl111", "arm,primecell" + +- reg: base address and size of the control registers block + +- interrupt-names: either the single entry "combined" representing a + combined interrupt output (CLCDINTR), or the four entries + "mbe", "vcomp", "lnbu", "fuf" representing the individual + CLCDMBEINTR, CLCDVCOMPINTR, CLCDLNBUINTR, CLCDFUFINTR interrupts + +- interrupts: contains an interrupt specifier for each entry in + interrupt-names + +- clocks-names: should contain "clcdclk" and "apb_pclk" + +- clocks: contains phandle and clock specifier pairs for the entries + in the clock-names property. See + Documentation/devicetree/binding/clock/clock-bindings.txt + +Optional properties: + +- arm,pl11x,framebuffer-base: a pair of two 32-bit values, address and size, + defining the framebuffer that must be used; if not present, the + framebuffer may be located anywhere in the memory + +- arm,pl11x,tft-r0g0b0-pads: when connected to a TFT panel, an array of three + 32-bit values, defining the way CLD pads are wired up; this implicitly + defines available color modes, for example: + - PL111 TFT 4:4:4 panel: + arm,pl11x,tft-r0g0b0-pads = <4 15 20>; + - PL110 TFT (1:)5:5:5 panel: + arm,pl11x,tft-r0g0b0-pads = <1 7 13>; + - PL111 TFT (1:)5:5:5 panel: + arm,pl11x,tft-r0g0b0-pads = <3 11 19>; + - PL111 TFT 5:6:5 panel: + arm,pl11x,tft-r0g0b0-pads = <3 10 19>; + - PL110 and PL111 TFT 8:8:8 panel: + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + - PL110 and PL111 TFT 8:8:8 panel, R & B components swapped: + arm,pl11x,tft-r0g0b0-pads = <16 8 0>; + +- max-memory-bandwidth: maximum bandwidth in bytes per second that the + cell's memory interface can handle + +- display-timings: standard display timings sub-node, defining possible + video modes of a connected panel; for details see + Documentation/devicetree/bindings/video/display-timing.txt + +Example: + + clcd@1f0000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x1f0000 0x1000>; + interrupt-names = "combined"; + interrupts = <14>; + clock-names = "clcdclk", "apb_pclk"; + clocks = <&v2m_oscclk1>, <&smbclk>; + + arm,pl11x,framebuffer-base = <0x18000000 0x00800000>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + max-memory-bandwidth = <36864000>; /* bps, 640x480@60 16bpp */ + display-timings { + native-mode = <&v2m_clcd_timing0>; + v2m_clcd_timing0: vga { + clock-frequency = <25175000>; + hactive = <640>; + hback-porch = <40>; + hfront-porch = <24>; + hsync-len = <96>; + vactive = <480>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <2>; + }; + }; + }; diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index dade5b7..c1d25c9 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -317,6 +317,7 @@ config FB_ARMCLCD select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEOMODE_HELPERS if OF help This framebuffer device driver is for the ARM PrimeCell PL110 Colour LCD controller. ARM PrimeCells provide the building diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c index 14d6b37..5a165dd 100644 --- a/drivers/video/amba-clcd.c +++ b/drivers/video/amba-clcd.c @@ -26,6 +26,11 @@ #include <linux/amba/clcd.h> #include <linux/clk.h> #include <linux/hardirq.h> +#include <linux/dma-mapping.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <video/of_display_timing.h> +#include <video/of_videomode.h> #include <asm/sizes.h> @@ -543,6 +548,217 @@ static int clcdfb_register(struct clcd_fb *fb) return ret; } +#ifdef CONFIG_OF +static int clcdfb_of_init_tft_panel(struct clcd_fb *fb, u32 r0, u32 g0, u32 b0) +{ + static struct { + unsigned int part; + u32 r0, g0, b0; + u32 caps; + } panels[] = { + { 0x110, 1, 7, 13, CLCD_CAP_5551 }, + { 0x110, 0, 8, 16, CLCD_CAP_888 }, + { 0x111, 4, 14, 20, CLCD_CAP_444 }, + { 0x111, 3, 11, 19, CLCD_CAP_444 | CLCD_CAP_5551 }, + { 0x111, 3, 10, 19, CLCD_CAP_444 | CLCD_CAP_5551 | + CLCD_CAP_565 }, + { 0x111, 0, 8, 16, CLCD_CAP_444 | CLCD_CAP_5551 | + CLCD_CAP_565 | CLCD_CAP_888 }, + }; + int i; + + /* Bypass pixel clock divider, data output on the falling edge */ + fb->panel->tim2 = TIM2_BCD | TIM2_IPC; + + /* TFT display, vert. comp. interrupt at the start of the back porch */ + fb->panel->cntl |= CNTL_LCDTFT | CNTL_LCDVCOMP(1); + + fb->panel->caps = 0; + + /* Match the setup with known variants */ + for (i = 0; i < ARRAY_SIZE(panels) && !fb->panel->caps; i++) { + if (amba_part(fb->dev) != panels[i].part) + continue; + if (g0 != panels[i].g0) + continue; + if (r0 == panels[i].r0 && b0 == panels[i].b0) + fb->panel->caps = panels[i].caps & CLCD_CAP_RGB; + if (r0 == panels[i].b0 && b0 == panels[i].r0) + fb->panel->caps = panels[i].caps & CLCD_CAP_BGR; + } + + return fb->panel->caps ? 0 : -EINVAL; +} + +static int clcdfb_snprintf_mode(char *buf, int size, struct fb_videomode *mode) +{ + return snprintf(buf, size, "%ux%u@%u", mode->xres, mode->yres, + mode->refresh); +} + +static int clcdfb_of_init_display(struct clcd_fb *fb) +{ + struct device_node *node = fb->dev->dev.of_node; + int err, len; + char *mode_name; + u32 max_bandwidth; + u32 tft_r0b0g0[3]; + + fb->panel = devm_kzalloc(&fb->dev->dev, sizeof(*fb->panel), GFP_KERNEL); + if (!fb->panel) + return -ENOMEM; + + err = of_get_fb_videomode(node, &fb->panel->mode, OF_USE_NATIVE_MODE); + if (err) + return err; + + len = clcdfb_snprintf_mode(NULL, 0, &fb->panel->mode); + mode_name = devm_kzalloc(&fb->dev->dev, len + 1, GFP_KERNEL); + clcdfb_snprintf_mode(mode_name, len + 1, &fb->panel->mode); + fb->panel->mode.name = mode_name; + + err = of_property_read_u32(node, "max-memory-bandwidth", + &max_bandwidth); + if (!err) + fb->panel->bpp = 8 * max_bandwidth / (fb->panel->mode.xres * + fb->panel->mode.yres * fb->panel->mode.refresh); + else + fb->panel->bpp = 32; + +#ifdef CONFIG_CPU_BIG_ENDIAN + fb->panel->cntl |= CNTL_BEBO; +#endif + fb->panel->width = -1; + fb->panel->height = -1; + + if (of_property_read_u32_array(node, "arm,pl11x,tft-r0g0b0-pads", + tft_r0b0g0, ARRAY_SIZE(tft_r0b0g0)) == 0) + return clcdfb_of_init_tft_panel(fb, tft_r0b0g0[0], + tft_r0b0g0[1], tft_r0b0g0[2]); + + return -ENOENT; +} + +static int clcdfb_of_vram_setup(struct clcd_fb *fb) +{ + int err; + u32 values[2]; + phys_addr_t phys_base; + size_t size; + + err = clcdfb_of_init_display(fb); + if (err) + return err; + + err = of_property_read_u32_array(fb->dev->dev.of_node, + "arm,pl11x,framebuffer-base", + values, ARRAY_SIZE(values)); + if (err) + return err; + + phys_base = values[0]; + size = values[1]; + + fb->fb.screen_base = ioremap(phys_base, size); + if (!fb->fb.screen_base) + return -ENOMEM; + + fb->fb.fix.smem_start = phys_base; + fb->fb.fix.smem_len = size; + + return 0; +} + +static int clcdfb_of_vram_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) +{ + unsigned long off, user_size, kernel_size; + + + off = vma->vm_pgoff << PAGE_SHIFT; + user_size = vma->vm_end - vma->vm_start; + kernel_size = fb->fb.fix.smem_len; + + if (off >= kernel_size || user_size > (kernel_size - off)) + return -ENXIO; + + return remap_pfn_range(vma, vma->vm_start, + __phys_to_pfn(fb->fb.fix.smem_start) + vma->vm_pgoff, + user_size, + pgprot_writecombine(vma->vm_page_prot)); +} + +static void clcdfb_of_vram_remove(struct clcd_fb *fb) +{ + iounmap(fb->fb.screen_base); +} + +static int clcdfb_of_dma_setup(struct clcd_fb *fb) +{ + unsigned long framesize; + dma_addr_t dma; + int err; + + err = clcdfb_of_init_display(fb); + if (err) + return err; + + framesize = fb->panel->mode.xres * fb->panel->mode.yres * + fb->panel->bpp / 8; + fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize, + &dma, GFP_KERNEL); + if (!fb->fb.screen_base) + return -ENOMEM; + + fb->fb.fix.smem_start = dma; + fb->fb.fix.smem_len = framesize; + + return 0; +} + +static int clcdfb_of_dma_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) +{ + return dma_mmap_writecombine(&fb->dev->dev, vma, fb->fb.screen_base, + fb->fb.fix.smem_start, fb->fb.fix.smem_len); +} + +static void clcdfb_of_dma_remove(struct clcd_fb *fb) +{ + dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, + fb->fb.screen_base, fb->fb.fix.smem_start); +} + +static struct clcd_board *clcdfb_of_get_board(struct amba_device *dev) +{ + struct clcd_board *board = devm_kzalloc(&dev->dev, sizeof(*board), + GFP_KERNEL); + struct device_node *node = dev->dev.of_node; + + if (!board) + return NULL; + + board->name = of_node_full_name(node); + board->caps = CLCD_CAP_ALL; + board->check = clcdfb_check; + board->decode = clcdfb_decode; + if (of_find_property(node, "arm,pl11x,framebuffer-base", NULL)) { + board->setup = clcdfb_of_vram_setup; + board->mmap = clcdfb_of_vram_mmap; + board->remove = clcdfb_of_vram_remove; + } else { + board->setup = clcdfb_of_dma_setup; + board->mmap = clcdfb_of_dma_mmap; + board->remove = clcdfb_of_dma_remove; + } + + return board; +} +#else +static struct clcd_board *clcdfb_of_get_board(struct amba_dev *dev) +{ + return NULL; +} +#endif + static int clcdfb_probe(struct amba_device *dev, const struct amba_id *id) { struct clcd_board *board = dev_get_platdata(&dev->dev); @@ -550,6 +766,9 @@ static int clcdfb_probe(struct amba_device *dev, const struct amba_id *id) int ret; if (!board) + board = clcdfb_of_get_board(dev); + + if (!board) return -EINVAL; ret = dma_set_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));

[v5,1/2] video: ARM CLCD: Add DT support

Commit Message

Comments

Patch