diff mbox series

[1/2] arm64: dts: qcom: sm8250: Add support for SDC2

Message ID 20201028190955.1264526-1-dmitry.baryshkov@linaro.org
State New
Headers show
Series [1/2] arm64: dts: qcom: sm8250: Add support for SDC2 | expand

Commit Message

Dmitry Baryshkov Oct. 28, 2020, 7:09 p.m. UTC
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Add support for SDC2 which can be used to interface uSD card.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[DB: minor fixes: clocks, iommus, opps]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 45 ++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

Comments

patchwork-bot+linux-arm-msm@kernel.org Nov. 24, 2020, 4:10 a.m. UTC | #1
Hello:

This series was applied to qcom/linux.git (refs/heads/for-next):

On Wed, 28 Oct 2020 22:09:54 +0300 you wrote:
> From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

> 

> Add support for SDC2 which can be used to interface uSD card.

> 

> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

> [DB: minor fixes: clocks, iommus, opps]

> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

> 

> [...]


Here is the summary with links:
  - [1/2] arm64: dts: qcom: sm8250: Add support for SDC2
    https://git.kernel.org/qcom/c/c4cf0300be84
  - [2/2] arm64: dts: qcom: rb5: Add support for uSD card
    https://git.kernel.org/qcom/c/53a8ccf1c7e5

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 457c3e65c0b6..2de4a9f808d5 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -1462,6 +1462,51 @@  IPCC_MPROC_SIGNAL_GLINK_QMP
 			};
 		};
 
+		sdhc_2: sdhci@8804000 {
+			compatible = "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x08804000 0 0x1000>;
+
+			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			iommus = <&apps_smmu 0x4a0 0x0>;
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+			power-domains = <&rpmhpd SM8250_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+
+			status = "disabled";
+
+			sdhc2_opp_table: sdhc2-opp-table {
+				compatible = "operating-points-v2";
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+					required-opps = <&rpmhpd_opp_min_svs>;
+				};
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+			};
+		};
+
 		dc_noc: interconnect@90c0000 {
 			compatible = "qcom,sm8250-dc-noc";
 			reg = <0 0x090c0000 0 0x4200>;