mbox series

[v4,0/5] Add clock drivers for SM8350

Message ID 20210118044321.2571775-1-vkoul@kernel.org
Headers show
Series Add clock drivers for SM8350 | expand

Message

Vinod Koul Jan. 18, 2021, 4:43 a.m. UTC 
This adds gcc clock controller drivers for the controller found
in SM8350 SoC

Changes in v4:
 - Add Ack from Rob on binding
 - modularize alpha_pll_trion_set_rate()

Changes in v3:
 - Drop rpmh clk patches applied
 - Add a new patch to replace regval with val as suggested by Stephen
 - Fix comments for new Lucid 5LPE PLL: sort new defines by BIT numbers, fix
   comments, use alpha_pll_check_rate_margin(), rework
   clk_lucid_5lpe_pll_postdiv_set_rate() logic
 - Add power domains and optional clocks in bindings
 - Fix comments for gcc sm8350 driver: clean includes used, use only
   .fw_name for clocks defined in DT, use floor ops for sdcc clocks, remove
   critical clocks and enable them in probe, add comments for clks using
   BRANCH_HALT_SKIP and BRANCH_HALT_DELAY

Changes in v2:
 - Add r-b from Bjorn
 - Add the gcc_qupv3_wrap_1_{m|s}_ahb_clk and gcc_qupv3_wrap1_s5_clk

Vinod Koul (3):
  clk: qcom: clk-alpha-pll: replace regval with val
  clk: qcom: clk-alpha-pll: modularize alpha_pll_trion_set_rate()
  dt-bindings: clock: Add SM8350 GCC clock bindings

Vivek Aknurwar (2):
  clk: qcom: clk-alpha-pll: Add support for Lucid 5LPE PLL
  clk: qcom: gcc: Add clock driver for SM8350

 .../bindings/clock/qcom,gcc-sm8350.yaml       |   96 +
 drivers/clk/qcom/Kconfig                      |    8 +
 drivers/clk/qcom/Makefile                     |    1 +
 drivers/clk/qcom/clk-alpha-pll.c              |  209 +-
 drivers/clk/qcom/clk-alpha-pll.h              |    4 +
 drivers/clk/qcom/gcc-sm8350.c                 | 3790 +++++++++++++++++
 include/dt-bindings/clock/qcom,gcc-sm8350.h   |  261 ++
 7 files changed, 4353 insertions(+), 16 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml
 create mode 100644 drivers/clk/qcom/gcc-sm8350.c
 create mode 100644 include/dt-bindings/clock/qcom,gcc-sm8350.h

Comments

Bjorn Andersson Jan. 25, 2021, 5:25 p.m. UTC | #1 
On Sun 17 Jan 22:43 CST 2021, Vinod Koul wrote:

> Add device tree bindings for global clock controller on SM8350 SoCs.
> 
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
>  .../bindings/clock/qcom,gcc-sm8350.yaml       |  96 +++++++
>  include/dt-bindings/clock/qcom,gcc-sm8350.h   | 261 ++++++++++++++++++
>  2 files changed, 357 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml
>  create mode 100644 include/dt-bindings/clock/qcom,gcc-sm8350.h
> 
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml
> new file mode 100644
> index 000000000000..78f35832aa41
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml
> @@ -0,0 +1,96 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/qcom,gcc-sm8350.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Global Clock & Reset Controller Binding for SM8350
> +
> +maintainers:
> +  - Vinod Koul <vkoul@kernel.org>
> +
> +description: |
> +  Qualcomm global clock control module which supports the clocks, resets and
> +  power domains on SM8350.
> +
> +  See also:
> +  - dt-bindings/clock/qcom,gcc-sm8350.h
> +
> +properties:
> +  compatible:
> +    const: qcom,gcc-sm8350
> +
> +  clocks:
> +    items:
> +      - description: Board XO source
> +      - description: Sleep clock source
> +      - description: PLL test clock source (Optional clock)
> +      - description: PCIE 0 Pipe clock source (Optional clock)
> +      - description: PCIE 1 Pipe clock source (Optional clock)
> +      - description: UFS card Rx symbol 0 clock source (Optional clock)
> +      - description: UFS card Rx symbol 1 clock source (Optional clock)
> +      - description: UFS card Tx symbol 0 clock source (Optional clock)
> +      - description: UFS phy Rx symbol 0 clock source (Optional clock)
> +      - description: UFS phy Rx symbol 1 clock source (Optional clock)
> +      - description: UFS phy Tx symbol 0 clock source (Optional clock)
> +      - description: USB3 phy wrapper pipe clock source (Optional clock)
> +      - description: USB3 phy sec pipe clock source (Optional clock)
> +    minItems: 2
> +    maxItems: 13
> +
> +  clock-names:
> +    items:
> +      - const: bi_tcxo
> +      - const: sleep_clk
> +      - const: core_bi_pll_test_se # Optional clock
> +      - const: pcie_0_pipe_clk # Optional clock
> +      - const: pcie_1_pipe_clk # Optional clock
> +      - const: ufs_card_rx_symbol_0_clk # Optional clock
> +      - const: ufs_card_rx_symbol_1_clk # Optional clock
> +      - const: ufs_card_tx_symbol_0_clk # Optional clock
> +      - const: ufs_phy_rx_symbol_0_clk # Optional clock
> +      - const: ufs_phy_rx_symbol_1_clk # Optional clock
> +      - const: ufs_phy_tx_symbol_0_clk # Optional clock
> +      - const: usb3_phy_wrapper_gcc_usb30_pipe_clk # Optional clock
> +      - const: usb3_uni_phy_sec_gcc_usb30_pipe_clk # Optional clock
> +    minItems: 2
> +    maxItems: 13
> +
> +  '#clock-cells':
> +    const: 1
> +
> +  '#reset-cells':
> +    const: 1
> +
> +  '#power-domain-cells':
> +    const: 1
> +
> +  reg:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - clocks
> +  - clock-names
> +  - reg
> +  - '#clock-cells'
> +  - '#reset-cells'
> +  - '#power-domain-cells'
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,rpmh.h>
> +    clock-controller@100000 {
> +      compatible = "qcom,gcc-sm8350";
> +      reg = <0x00100000 0x1f0000>;
> +      clocks = <&rpmhcc RPMH_CXO_CLK>,
> +               <&sleep_clk>;
> +      clock-names = "bi_tcxo", "sleep_clk";
> +      #clock-cells = <1>;
> +      #reset-cells = <1>;
> +      #power-domain-cells = <1>;
> +    };
> +
> +...
> diff --git a/include/dt-bindings/clock/qcom,gcc-sm8350.h b/include/dt-bindings/clock/qcom,gcc-sm8350.h
> new file mode 100644
> index 000000000000..2b289c5c109f
> --- /dev/null
> +++ b/include/dt-bindings/clock/qcom,gcc-sm8350.h
> @@ -0,0 +1,261 @@
> +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
> +/*
> + * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2020-2021, Linaro Limited
> + */
> +
> +#ifndef _DT_BINDINGS_CLK_QCOM_GCC_SM8350_H
> +#define _DT_BINDINGS_CLK_QCOM_GCC_SM8350_H
> +
> +/* GCC HW clocks */
> +#define CORE_BI_PLL_TEST_SE					0
> +#define PCIE_0_PIPE_CLK						1
> +#define PCIE_1_PIPE_CLK						2
> +#define UFS_CARD_RX_SYMBOL_0_CLK				3
> +#define UFS_CARD_RX_SYMBOL_1_CLK				4
> +#define UFS_CARD_TX_SYMBOL_0_CLK				5
> +#define UFS_PHY_RX_SYMBOL_0_CLK					6
> +#define UFS_PHY_RX_SYMBOL_1_CLK					7
> +#define UFS_PHY_TX_SYMBOL_0_CLK					8
> +#define USB3_PHY_WRAPPER_GCC_USB30_PIPE_CLK			9
> +#define USB3_UNI_PHY_SEC_GCC_USB30_PIPE_CLK			10
> +
> +/* GCC clocks */
> +#define GCC_AGGRE_NOC_PCIE_0_AXI_CLK				11
> +#define GCC_AGGRE_NOC_PCIE_1_AXI_CLK				12
> +#define GCC_AGGRE_NOC_PCIE_TBU_CLK				13
> +#define GCC_AGGRE_UFS_CARD_AXI_CLK				14
> +#define GCC_AGGRE_UFS_CARD_AXI_HW_CTL_CLK			15
> +#define GCC_AGGRE_UFS_PHY_AXI_CLK				16
> +#define GCC_AGGRE_UFS_PHY_AXI_HW_CTL_CLK			17
> +#define GCC_AGGRE_USB3_PRIM_AXI_CLK				18
> +#define GCC_AGGRE_USB3_SEC_AXI_CLK				19
> +#define GCC_BOOT_ROM_AHB_CLK					20
> +#define GCC_CAMERA_AHB_CLK					21

You removed these from the driver, so no need to expose them in the
dt-binding either.

Apart from that

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>


Regards,
Bjorn

> +#define GCC_CAMERA_HF_AXI_CLK					22
> +#define GCC_CAMERA_SF_AXI_CLK					23
> +#define GCC_CAMERA_XO_CLK					24
> +#define GCC_CFG_NOC_USB3_PRIM_AXI_CLK				25
> +#define GCC_CFG_NOC_USB3_SEC_AXI_CLK				26
> +#define GCC_DDRSS_GPU_AXI_CLK					27
> +#define GCC_DDRSS_PCIE_SF_TBU_CLK				28
> +#define GCC_DISP_AHB_CLK					29
> +#define GCC_DISP_HF_AXI_CLK					30
> +#define GCC_DISP_SF_AXI_CLK					31
> +#define GCC_DISP_XO_CLK						32
> +#define GCC_GP1_CLK						33
> +#define GCC_GP1_CLK_SRC						34
> +#define GCC_GP2_CLK						35
> +#define GCC_GP2_CLK_SRC						36
> +#define GCC_GP3_CLK						37
> +#define GCC_GP3_CLK_SRC						38
> +#define GCC_GPLL0						39
> +#define GCC_GPLL0_OUT_EVEN					40
> +#define GCC_GPLL4						41
> +#define GCC_GPLL9						42
> +#define GCC_GPU_CFG_AHB_CLK					43
> +#define GCC_GPU_GPLL0_CLK_SRC					44
> +#define GCC_GPU_GPLL0_DIV_CLK_SRC				45
> +#define GCC_GPU_IREF_EN						46
> +#define GCC_GPU_MEMNOC_GFX_CLK					47
> +#define GCC_GPU_SNOC_DVM_GFX_CLK				48
> +#define GCC_PCIE0_PHY_RCHNG_CLK					49
> +#define GCC_PCIE1_PHY_RCHNG_CLK					50
> +#define GCC_PCIE_0_AUX_CLK					51
> +#define GCC_PCIE_0_AUX_CLK_SRC					52
> +#define GCC_PCIE_0_CFG_AHB_CLK					53
> +#define GCC_PCIE_0_CLKREF_EN					54
> +#define GCC_PCIE_0_MSTR_AXI_CLK					55
> +#define GCC_PCIE_0_PHY_RCHNG_CLK_SRC				56
> +#define GCC_PCIE_0_PIPE_CLK					57
> +#define GCC_PCIE_0_PIPE_CLK_SRC					58
> +#define GCC_PCIE_0_SLV_AXI_CLK					59
> +#define GCC_PCIE_0_SLV_Q2A_AXI_CLK				60
> +#define GCC_PCIE_1_AUX_CLK					61
> +#define GCC_PCIE_1_AUX_CLK_SRC					62
> +#define GCC_PCIE_1_CFG_AHB_CLK					63
> +#define GCC_PCIE_1_CLKREF_EN					64
> +#define GCC_PCIE_1_MSTR_AXI_CLK					65
> +#define GCC_PCIE_1_PHY_RCHNG_CLK_SRC				66
> +#define GCC_PCIE_1_PIPE_CLK					67
> +#define GCC_PCIE_1_PIPE_CLK_SRC					68
> +#define GCC_PCIE_1_SLV_AXI_CLK					69
> +#define GCC_PCIE_1_SLV_Q2A_AXI_CLK				70
> +#define GCC_PDM2_CLK						71
> +#define GCC_PDM2_CLK_SRC					72
> +#define GCC_PDM_AHB_CLK						73
> +#define GCC_PDM_XO4_CLK						74
> +#define GCC_QMIP_CAMERA_NRT_AHB_CLK				75
> +#define GCC_QMIP_CAMERA_RT_AHB_CLK				76
> +#define GCC_QMIP_DISP_AHB_CLK					77
> +#define GCC_QMIP_VIDEO_CVP_AHB_CLK				78
> +#define GCC_QMIP_VIDEO_VCODEC_AHB_CLK				79
> +#define GCC_QUPV3_WRAP0_CORE_2X_CLK				80
> +#define GCC_QUPV3_WRAP0_CORE_CLK				81
> +#define GCC_QUPV3_WRAP0_S0_CLK					82
> +#define GCC_QUPV3_WRAP0_S0_CLK_SRC				83
> +#define GCC_QUPV3_WRAP0_S1_CLK					84
> +#define GCC_QUPV3_WRAP0_S1_CLK_SRC				85
> +#define GCC_QUPV3_WRAP0_S2_CLK					86
> +#define GCC_QUPV3_WRAP0_S2_CLK_SRC				87
> +#define GCC_QUPV3_WRAP0_S3_CLK					88
> +#define GCC_QUPV3_WRAP0_S3_CLK_SRC				89
> +#define GCC_QUPV3_WRAP0_S4_CLK					90
> +#define GCC_QUPV3_WRAP0_S4_CLK_SRC				91
> +#define GCC_QUPV3_WRAP0_S5_CLK					92
> +#define GCC_QUPV3_WRAP0_S5_CLK_SRC				93
> +#define GCC_QUPV3_WRAP0_S6_CLK					94
> +#define GCC_QUPV3_WRAP0_S6_CLK_SRC				95
> +#define GCC_QUPV3_WRAP0_S7_CLK					96
> +#define GCC_QUPV3_WRAP0_S7_CLK_SRC				97
> +#define GCC_QUPV3_WRAP1_CORE_2X_CLK				98
> +#define GCC_QUPV3_WRAP1_CORE_CLK				99
> +#define GCC_QUPV3_WRAP1_S0_CLK					100
> +#define GCC_QUPV3_WRAP1_S0_CLK_SRC				101
> +#define GCC_QUPV3_WRAP1_S1_CLK					102
> +#define GCC_QUPV3_WRAP1_S1_CLK_SRC				103
> +#define GCC_QUPV3_WRAP1_S2_CLK					104
> +#define GCC_QUPV3_WRAP1_S2_CLK_SRC				105
> +#define GCC_QUPV3_WRAP1_S3_CLK					106
> +#define GCC_QUPV3_WRAP1_S3_CLK_SRC				107
> +#define GCC_QUPV3_WRAP1_S4_CLK					108
> +#define GCC_QUPV3_WRAP1_S4_CLK_SRC				109
> +#define GCC_QUPV3_WRAP1_S5_CLK					110
> +#define GCC_QUPV3_WRAP1_S5_CLK_SRC				111
> +#define GCC_QUPV3_WRAP2_CORE_2X_CLK				112
> +#define GCC_QUPV3_WRAP2_CORE_CLK				113
> +#define GCC_QUPV3_WRAP2_S0_CLK					114
> +#define GCC_QUPV3_WRAP2_S0_CLK_SRC				115
> +#define GCC_QUPV3_WRAP2_S1_CLK					116
> +#define GCC_QUPV3_WRAP2_S1_CLK_SRC				117
> +#define GCC_QUPV3_WRAP2_S2_CLK					118
> +#define GCC_QUPV3_WRAP2_S2_CLK_SRC				119
> +#define GCC_QUPV3_WRAP2_S3_CLK					120
> +#define GCC_QUPV3_WRAP2_S3_CLK_SRC				121
> +#define GCC_QUPV3_WRAP2_S4_CLK					122
> +#define GCC_QUPV3_WRAP2_S4_CLK_SRC				123
> +#define GCC_QUPV3_WRAP2_S5_CLK					124
> +#define GCC_QUPV3_WRAP2_S5_CLK_SRC				125
> +#define GCC_QUPV3_WRAP_0_M_AHB_CLK				126
> +#define GCC_QUPV3_WRAP_0_S_AHB_CLK				127
> +#define GCC_QUPV3_WRAP_1_M_AHB_CLK				128
> +#define GCC_QUPV3_WRAP_1_S_AHB_CLK				129
> +#define GCC_QUPV3_WRAP_2_M_AHB_CLK				130
> +#define GCC_QUPV3_WRAP_2_S_AHB_CLK				131
> +#define GCC_SDCC2_AHB_CLK					132
> +#define GCC_SDCC2_APPS_CLK					133
> +#define GCC_SDCC2_APPS_CLK_SRC					134
> +#define GCC_SDCC4_AHB_CLK					135
> +#define GCC_SDCC4_APPS_CLK					136
> +#define GCC_SDCC4_APPS_CLK_SRC					137
> +#define GCC_THROTTLE_PCIE_AHB_CLK				138
> +#define GCC_UFS_1_CLKREF_EN					139
> +#define GCC_UFS_CARD_AHB_CLK					140
> +#define GCC_UFS_CARD_AXI_CLK					141
> +#define GCC_UFS_CARD_AXI_CLK_SRC				142
> +#define GCC_UFS_CARD_AXI_HW_CTL_CLK				143
> +#define GCC_UFS_CARD_ICE_CORE_CLK				144
> +#define GCC_UFS_CARD_ICE_CORE_CLK_SRC				145
> +#define GCC_UFS_CARD_ICE_CORE_HW_CTL_CLK			146
> +#define GCC_UFS_CARD_PHY_AUX_CLK				147
> +#define GCC_UFS_CARD_PHY_AUX_CLK_SRC				148
> +#define GCC_UFS_CARD_PHY_AUX_HW_CTL_CLK				149
> +#define GCC_UFS_CARD_RX_SYMBOL_0_CLK				150
> +#define GCC_UFS_CARD_RX_SYMBOL_0_CLK_SRC			151
> +#define GCC_UFS_CARD_RX_SYMBOL_1_CLK				152
> +#define GCC_UFS_CARD_RX_SYMBOL_1_CLK_SRC			153
> +#define GCC_UFS_CARD_TX_SYMBOL_0_CLK				154
> +#define GCC_UFS_CARD_TX_SYMBOL_0_CLK_SRC			155
> +#define GCC_UFS_CARD_UNIPRO_CORE_CLK				156
> +#define GCC_UFS_CARD_UNIPRO_CORE_CLK_SRC			157
> +#define GCC_UFS_CARD_UNIPRO_CORE_HW_CTL_CLK			158
> +#define GCC_UFS_PHY_AHB_CLK					159
> +#define GCC_UFS_PHY_AXI_CLK					160
> +#define GCC_UFS_PHY_AXI_CLK_SRC					161
> +#define GCC_UFS_PHY_AXI_HW_CTL_CLK				162
> +#define GCC_UFS_PHY_ICE_CORE_CLK				163
> +#define GCC_UFS_PHY_ICE_CORE_CLK_SRC				164
> +#define GCC_UFS_PHY_ICE_CORE_HW_CTL_CLK				165
> +#define GCC_UFS_PHY_PHY_AUX_CLK					166
> +#define GCC_UFS_PHY_PHY_AUX_CLK_SRC				167
> +#define GCC_UFS_PHY_PHY_AUX_HW_CTL_CLK				168
> +#define GCC_UFS_PHY_RX_SYMBOL_0_CLK				169
> +#define GCC_UFS_PHY_RX_SYMBOL_0_CLK_SRC				170
> +#define GCC_UFS_PHY_RX_SYMBOL_1_CLK				171
> +#define GCC_UFS_PHY_RX_SYMBOL_1_CLK_SRC				172
> +#define GCC_UFS_PHY_TX_SYMBOL_0_CLK				173
> +#define GCC_UFS_PHY_TX_SYMBOL_0_CLK_SRC				174
> +#define GCC_UFS_PHY_UNIPRO_CORE_CLK				175
> +#define GCC_UFS_PHY_UNIPRO_CORE_CLK_SRC				176
> +#define GCC_UFS_PHY_UNIPRO_CORE_HW_CTL_CLK			177
> +#define GCC_USB30_PRIM_MASTER_CLK				178
> +#define GCC_USB30_PRIM_MASTER_CLK__FORCE_MEM_CORE_ON		179
> +#define GCC_USB30_PRIM_MASTER_CLK_SRC				180
> +#define GCC_USB30_PRIM_MOCK_UTMI_CLK				181
> +#define GCC_USB30_PRIM_MOCK_UTMI_CLK_SRC			182
> +#define GCC_USB30_PRIM_MOCK_UTMI_POSTDIV_CLK_SRC		183
> +#define GCC_USB30_PRIM_SLEEP_CLK				184
> +#define GCC_USB30_SEC_MASTER_CLK				185
> +#define GCC_USB30_SEC_MASTER_CLK__FORCE_MEM_CORE_ON		186
> +#define GCC_USB30_SEC_MASTER_CLK_SRC				187
> +#define GCC_USB30_SEC_MOCK_UTMI_CLK				188
> +#define GCC_USB30_SEC_MOCK_UTMI_CLK_SRC				189
> +#define GCC_USB30_SEC_MOCK_UTMI_POSTDIV_CLK_SRC			190
> +#define GCC_USB30_SEC_SLEEP_CLK					191
> +#define GCC_USB3_PRIM_PHY_AUX_CLK				192
> +#define GCC_USB3_PRIM_PHY_AUX_CLK_SRC				193
> +#define GCC_USB3_PRIM_PHY_COM_AUX_CLK				194
> +#define GCC_USB3_PRIM_PHY_PIPE_CLK				195
> +#define GCC_USB3_PRIM_PHY_PIPE_CLK_SRC				196
> +#define GCC_USB3_SEC_CLKREF_EN					197
> +#define GCC_USB3_SEC_PHY_AUX_CLK				198
> +#define GCC_USB3_SEC_PHY_AUX_CLK_SRC				199
> +#define GCC_USB3_SEC_PHY_COM_AUX_CLK				200
> +#define GCC_USB3_SEC_PHY_PIPE_CLK				201
> +#define GCC_USB3_SEC_PHY_PIPE_CLK_SRC				202
> +#define GCC_VIDEO_AHB_CLK					203
> +#define GCC_VIDEO_AXI0_CLK					204
> +#define GCC_VIDEO_AXI1_CLK					205
> +#define GCC_VIDEO_XO_CLK					206
> +
> +/* GCC resets */
> +#define GCC_CAMERA_BCR						0
> +#define GCC_DISPLAY_BCR						1
> +#define GCC_GPU_BCR						2
> +#define GCC_MMSS_BCR						3
> +#define GCC_PCIE_0_BCR						4
> +#define GCC_PCIE_0_LINK_DOWN_BCR				5
> +#define GCC_PCIE_0_NOCSR_COM_PHY_BCR				6
> +#define GCC_PCIE_0_PHY_BCR					7
> +#define GCC_PCIE_0_PHY_NOCSR_COM_PHY_BCR			8
> +#define GCC_PCIE_1_BCR						9
> +#define GCC_PCIE_1_LINK_DOWN_BCR				10
> +#define GCC_PCIE_1_NOCSR_COM_PHY_BCR				11
> +#define GCC_PCIE_1_PHY_BCR					12
> +#define GCC_PCIE_1_PHY_NOCSR_COM_PHY_BCR			13
> +#define GCC_PCIE_PHY_CFG_AHB_BCR				14
> +#define GCC_PCIE_PHY_COM_BCR					15
> +#define GCC_PDM_BCR						16
> +#define GCC_QUPV3_WRAPPER_0_BCR					17
> +#define GCC_QUPV3_WRAPPER_1_BCR					18
> +#define GCC_QUPV3_WRAPPER_2_BCR					19
> +#define GCC_QUSB2PHY_PRIM_BCR					20
> +#define GCC_QUSB2PHY_SEC_BCR					21
> +#define GCC_SDCC2_BCR						22
> +#define GCC_SDCC4_BCR						23
> +#define GCC_UFS_CARD_BCR					24
> +#define GCC_UFS_PHY_BCR						25
> +#define GCC_USB30_PRIM_BCR					26
> +#define GCC_USB30_SEC_BCR					27
> +#define GCC_USB3_DP_PHY_PRIM_BCR				28
> +#define GCC_USB3_DP_PHY_SEC_BCR					29
> +#define GCC_USB3_PHY_PRIM_BCR					30
> +#define GCC_USB3_PHY_SEC_BCR					31
> +#define GCC_USB3PHY_PHY_PRIM_BCR				32
> +#define GCC_USB3PHY_PHY_SEC_BCR					33
> +#define GCC_USB_PHY_CFG_AHB2PHY_BCR				34
> +#define GCC_VIDEO_AXI0_CLK_ARES					35
> +#define GCC_VIDEO_AXI1_CLK_ARES					36
> +#define GCC_VIDEO_BCR						37
> +
> +#endif
> -- 
> 2.26.2
>
Vinod Koul Jan. 26, 2021, 8 a.m. UTC | #2 
On 25-01-21, 11:25, Bjorn Andersson wrote:
> On Sun 17 Jan 22:43 CST 2021, Vinod Koul wrote:
> 
> > Add device tree bindings for global clock controller on SM8350 SoCs.
> > 
> > Reviewed-by: Rob Herring <robh@kernel.org>
> > Signed-off-by: Vinod Koul <vkoul@kernel.org>
> > ---
> >  .../bindings/clock/qcom,gcc-sm8350.yaml       |  96 +++++++
> >  include/dt-bindings/clock/qcom,gcc-sm8350.h   | 261 ++++++++++++++++++
> >  2 files changed, 357 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml
> >  create mode 100644 include/dt-bindings/clock/qcom,gcc-sm8350.h
> > 
> > diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml
> > new file mode 100644
> > index 000000000000..78f35832aa41
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml
> > @@ -0,0 +1,96 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/clock/qcom,gcc-sm8350.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Qualcomm Global Clock & Reset Controller Binding for SM8350
> > +
> > +maintainers:
> > +  - Vinod Koul <vkoul@kernel.org>
> > +
> > +description: |
> > +  Qualcomm global clock control module which supports the clocks, resets and
> > +  power domains on SM8350.
> > +
> > +  See also:
> > +  - dt-bindings/clock/qcom,gcc-sm8350.h
> > +
> > +properties:
> > +  compatible:
> > +    const: qcom,gcc-sm8350
> > +
> > +  clocks:
> > +    items:
> > +      - description: Board XO source
> > +      - description: Sleep clock source
> > +      - description: PLL test clock source (Optional clock)
> > +      - description: PCIE 0 Pipe clock source (Optional clock)
> > +      - description: PCIE 1 Pipe clock source (Optional clock)
> > +      - description: UFS card Rx symbol 0 clock source (Optional clock)
> > +      - description: UFS card Rx symbol 1 clock source (Optional clock)
> > +      - description: UFS card Tx symbol 0 clock source (Optional clock)
> > +      - description: UFS phy Rx symbol 0 clock source (Optional clock)
> > +      - description: UFS phy Rx symbol 1 clock source (Optional clock)
> > +      - description: UFS phy Tx symbol 0 clock source (Optional clock)
> > +      - description: USB3 phy wrapper pipe clock source (Optional clock)
> > +      - description: USB3 phy sec pipe clock source (Optional clock)
> > +    minItems: 2
> > +    maxItems: 13
> > +
> > +  clock-names:
> > +    items:
> > +      - const: bi_tcxo
> > +      - const: sleep_clk
> > +      - const: core_bi_pll_test_se # Optional clock
> > +      - const: pcie_0_pipe_clk # Optional clock
> > +      - const: pcie_1_pipe_clk # Optional clock
> > +      - const: ufs_card_rx_symbol_0_clk # Optional clock
> > +      - const: ufs_card_rx_symbol_1_clk # Optional clock
> > +      - const: ufs_card_tx_symbol_0_clk # Optional clock
> > +      - const: ufs_phy_rx_symbol_0_clk # Optional clock
> > +      - const: ufs_phy_rx_symbol_1_clk # Optional clock
> > +      - const: ufs_phy_tx_symbol_0_clk # Optional clock
> > +      - const: usb3_phy_wrapper_gcc_usb30_pipe_clk # Optional clock
> > +      - const: usb3_uni_phy_sec_gcc_usb30_pipe_clk # Optional clock
> > +    minItems: 2
> > +    maxItems: 13
> > +
> > +  '#clock-cells':
> > +    const: 1
> > +
> > +  '#reset-cells':
> > +    const: 1
> > +
> > +  '#power-domain-cells':
> > +    const: 1
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +required:
> > +  - compatible
> > +  - clocks
> > +  - clock-names
> > +  - reg
> > +  - '#clock-cells'
> > +  - '#reset-cells'
> > +  - '#power-domain-cells'
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/qcom,rpmh.h>
> > +    clock-controller@100000 {
> > +      compatible = "qcom,gcc-sm8350";
> > +      reg = <0x00100000 0x1f0000>;
> > +      clocks = <&rpmhcc RPMH_CXO_CLK>,
> > +               <&sleep_clk>;
> > +      clock-names = "bi_tcxo", "sleep_clk";
> > +      #clock-cells = <1>;
> > +      #reset-cells = <1>;
> > +      #power-domain-cells = <1>;
> > +    };
> > +
> > +...
> > diff --git a/include/dt-bindings/clock/qcom,gcc-sm8350.h b/include/dt-bindings/clock/qcom,gcc-sm8350.h
> > new file mode 100644
> > index 000000000000..2b289c5c109f
> > --- /dev/null
> > +++ b/include/dt-bindings/clock/qcom,gcc-sm8350.h
> > @@ -0,0 +1,261 @@
> > +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
> > +/*
> > + * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
> > + * Copyright (c) 2020-2021, Linaro Limited
> > + */
> > +
> > +#ifndef _DT_BINDINGS_CLK_QCOM_GCC_SM8350_H
> > +#define _DT_BINDINGS_CLK_QCOM_GCC_SM8350_H
> > +
> > +/* GCC HW clocks */
> > +#define CORE_BI_PLL_TEST_SE					0
> > +#define PCIE_0_PIPE_CLK						1
> > +#define PCIE_1_PIPE_CLK						2
> > +#define UFS_CARD_RX_SYMBOL_0_CLK				3
> > +#define UFS_CARD_RX_SYMBOL_1_CLK				4
> > +#define UFS_CARD_TX_SYMBOL_0_CLK				5
> > +#define UFS_PHY_RX_SYMBOL_0_CLK					6
> > +#define UFS_PHY_RX_SYMBOL_1_CLK					7
> > +#define UFS_PHY_TX_SYMBOL_0_CLK					8
> > +#define USB3_PHY_WRAPPER_GCC_USB30_PIPE_CLK			9
> > +#define USB3_UNI_PHY_SEC_GCC_USB30_PIPE_CLK			10
> > +
> > +/* GCC clocks */
> > +#define GCC_AGGRE_NOC_PCIE_0_AXI_CLK				11
> > +#define GCC_AGGRE_NOC_PCIE_1_AXI_CLK				12
> > +#define GCC_AGGRE_NOC_PCIE_TBU_CLK				13
> > +#define GCC_AGGRE_UFS_CARD_AXI_CLK				14
> > +#define GCC_AGGRE_UFS_CARD_AXI_HW_CTL_CLK			15
> > +#define GCC_AGGRE_UFS_PHY_AXI_CLK				16
> > +#define GCC_AGGRE_UFS_PHY_AXI_HW_CTL_CLK			17
> > +#define GCC_AGGRE_USB3_PRIM_AXI_CLK				18
> > +#define GCC_AGGRE_USB3_SEC_AXI_CLK				19
> > +#define GCC_BOOT_ROM_AHB_CLK					20
> > +#define GCC_CAMERA_AHB_CLK					21
> 
> You removed these from the driver, so no need to expose them in the
> dt-binding either.

I did think about that and thought maybe it is better to leave the
defines. We can always update the driver to use if we ever felt the
need.

But then I dont think we will ever do that so makes sense, will update
this and send with acks collected
Bjorn Andersson Jan. 26, 2021, 2:17 p.m. UTC | #3 
On Tue 26 Jan 02:00 CST 2021, Vinod Koul wrote:

> On 25-01-21, 11:25, Bjorn Andersson wrote:
> > On Sun 17 Jan 22:43 CST 2021, Vinod Koul wrote:
> > 
> > > Add device tree bindings for global clock controller on SM8350 SoCs.
> > > 
> > > Reviewed-by: Rob Herring <robh@kernel.org>
> > > Signed-off-by: Vinod Koul <vkoul@kernel.org>
> > > ---
> > >  .../bindings/clock/qcom,gcc-sm8350.yaml       |  96 +++++++
> > >  include/dt-bindings/clock/qcom,gcc-sm8350.h   | 261 ++++++++++++++++++
> > >  2 files changed, 357 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml
> > >  create mode 100644 include/dt-bindings/clock/qcom,gcc-sm8350.h
> > > 
> > > diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml
> > > new file mode 100644
> > > index 000000000000..78f35832aa41
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml
> > > @@ -0,0 +1,96 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/clock/qcom,gcc-sm8350.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Qualcomm Global Clock & Reset Controller Binding for SM8350
> > > +
> > > +maintainers:
> > > +  - Vinod Koul <vkoul@kernel.org>
> > > +
> > > +description: |
> > > +  Qualcomm global clock control module which supports the clocks, resets and
> > > +  power domains on SM8350.
> > > +
> > > +  See also:
> > > +  - dt-bindings/clock/qcom,gcc-sm8350.h
> > > +
> > > +properties:
> > > +  compatible:
> > > +    const: qcom,gcc-sm8350
> > > +
> > > +  clocks:
> > > +    items:
> > > +      - description: Board XO source
> > > +      - description: Sleep clock source
> > > +      - description: PLL test clock source (Optional clock)
> > > +      - description: PCIE 0 Pipe clock source (Optional clock)
> > > +      - description: PCIE 1 Pipe clock source (Optional clock)
> > > +      - description: UFS card Rx symbol 0 clock source (Optional clock)
> > > +      - description: UFS card Rx symbol 1 clock source (Optional clock)
> > > +      - description: UFS card Tx symbol 0 clock source (Optional clock)
> > > +      - description: UFS phy Rx symbol 0 clock source (Optional clock)
> > > +      - description: UFS phy Rx symbol 1 clock source (Optional clock)
> > > +      - description: UFS phy Tx symbol 0 clock source (Optional clock)
> > > +      - description: USB3 phy wrapper pipe clock source (Optional clock)
> > > +      - description: USB3 phy sec pipe clock source (Optional clock)
> > > +    minItems: 2
> > > +    maxItems: 13
> > > +
> > > +  clock-names:
> > > +    items:
> > > +      - const: bi_tcxo
> > > +      - const: sleep_clk
> > > +      - const: core_bi_pll_test_se # Optional clock
> > > +      - const: pcie_0_pipe_clk # Optional clock
> > > +      - const: pcie_1_pipe_clk # Optional clock
> > > +      - const: ufs_card_rx_symbol_0_clk # Optional clock
> > > +      - const: ufs_card_rx_symbol_1_clk # Optional clock
> > > +      - const: ufs_card_tx_symbol_0_clk # Optional clock
> > > +      - const: ufs_phy_rx_symbol_0_clk # Optional clock
> > > +      - const: ufs_phy_rx_symbol_1_clk # Optional clock
> > > +      - const: ufs_phy_tx_symbol_0_clk # Optional clock
> > > +      - const: usb3_phy_wrapper_gcc_usb30_pipe_clk # Optional clock
> > > +      - const: usb3_uni_phy_sec_gcc_usb30_pipe_clk # Optional clock
> > > +    minItems: 2
> > > +    maxItems: 13
> > > +
> > > +  '#clock-cells':
> > > +    const: 1
> > > +
> > > +  '#reset-cells':
> > > +    const: 1
> > > +
> > > +  '#power-domain-cells':
> > > +    const: 1
> > > +
> > > +  reg:
> > > +    maxItems: 1
> > > +
> > > +required:
> > > +  - compatible
> > > +  - clocks
> > > +  - clock-names
> > > +  - reg
> > > +  - '#clock-cells'
> > > +  - '#reset-cells'
> > > +  - '#power-domain-cells'
> > > +
> > > +additionalProperties: false
> > > +
> > > +examples:
> > > +  - |
> > > +    #include <dt-bindings/clock/qcom,rpmh.h>
> > > +    clock-controller@100000 {
> > > +      compatible = "qcom,gcc-sm8350";
> > > +      reg = <0x00100000 0x1f0000>;
> > > +      clocks = <&rpmhcc RPMH_CXO_CLK>,
> > > +               <&sleep_clk>;
> > > +      clock-names = "bi_tcxo", "sleep_clk";
> > > +      #clock-cells = <1>;
> > > +      #reset-cells = <1>;
> > > +      #power-domain-cells = <1>;
> > > +    };
> > > +
> > > +...
> > > diff --git a/include/dt-bindings/clock/qcom,gcc-sm8350.h b/include/dt-bindings/clock/qcom,gcc-sm8350.h
> > > new file mode 100644
> > > index 000000000000..2b289c5c109f
> > > --- /dev/null
> > > +++ b/include/dt-bindings/clock/qcom,gcc-sm8350.h
> > > @@ -0,0 +1,261 @@
> > > +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
> > > +/*
> > > + * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
> > > + * Copyright (c) 2020-2021, Linaro Limited
> > > + */
> > > +
> > > +#ifndef _DT_BINDINGS_CLK_QCOM_GCC_SM8350_H
> > > +#define _DT_BINDINGS_CLK_QCOM_GCC_SM8350_H
> > > +
> > > +/* GCC HW clocks */
> > > +#define CORE_BI_PLL_TEST_SE					0
> > > +#define PCIE_0_PIPE_CLK						1
> > > +#define PCIE_1_PIPE_CLK						2
> > > +#define UFS_CARD_RX_SYMBOL_0_CLK				3
> > > +#define UFS_CARD_RX_SYMBOL_1_CLK				4
> > > +#define UFS_CARD_TX_SYMBOL_0_CLK				5
> > > +#define UFS_PHY_RX_SYMBOL_0_CLK					6
> > > +#define UFS_PHY_RX_SYMBOL_1_CLK					7
> > > +#define UFS_PHY_TX_SYMBOL_0_CLK					8
> > > +#define USB3_PHY_WRAPPER_GCC_USB30_PIPE_CLK			9
> > > +#define USB3_UNI_PHY_SEC_GCC_USB30_PIPE_CLK			10
> > > +
> > > +/* GCC clocks */
> > > +#define GCC_AGGRE_NOC_PCIE_0_AXI_CLK				11
> > > +#define GCC_AGGRE_NOC_PCIE_1_AXI_CLK				12
> > > +#define GCC_AGGRE_NOC_PCIE_TBU_CLK				13
> > > +#define GCC_AGGRE_UFS_CARD_AXI_CLK				14
> > > +#define GCC_AGGRE_UFS_CARD_AXI_HW_CTL_CLK			15
> > > +#define GCC_AGGRE_UFS_PHY_AXI_CLK				16
> > > +#define GCC_AGGRE_UFS_PHY_AXI_HW_CTL_CLK			17
> > > +#define GCC_AGGRE_USB3_PRIM_AXI_CLK				18
> > > +#define GCC_AGGRE_USB3_SEC_AXI_CLK				19
> > > +#define GCC_BOOT_ROM_AHB_CLK					20
> > > +#define GCC_CAMERA_AHB_CLK					21
> > 
> > You removed these from the driver, so no need to expose them in the
> > dt-binding either.
> 
> I did think about that and thought maybe it is better to leave the
> defines. We can always update the driver to use if we ever felt the
> need.
> 
> But then I dont think we will ever do that so makes sense, will update
> this and send with acks collected
> 

Given that the actual value isn't significant (just need to be stable),
we can easily add those as new defines at the end of the list when that
day comes.

Regards,
Bjorn