| Message ID | 1613619715-28785-9-git-send-email-victor.liu@nxp.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add some DRM bridge drivers support for i.MX8qm/qxp SoCs | expand |
On Thu, Feb 18, 2021 at 11:41:49AM +0800, Liu Ying wrote: > This patch adds bindings for i.MX8qxp pixel link to DPI(PXL2DPI). > > Signed-off-by: Liu Ying <victor.liu@nxp.com> > --- > v3->v4: > * Add 'fsl,sc-resource' property. (Rob) > > v2->v3: > * Drop 'fsl,syscon' property. (Rob) > * Mention the CSR module controls PXL2DPI. > > v1->v2: > * Use graph schema. (Laurent) > > .../display/bridge/fsl,imx8qxp-pxl2dpi.yaml | 108 +++++++++++++++++++++ > 1 file changed, 108 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml > > diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml > new file mode 100644 > index 00000000..e4e77fa > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml > @@ -0,0 +1,108 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pxl2dpi.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Freescale i.MX8qxp Pixel Link to Display Pixel Interface > + > +maintainers: > + - Liu Ying <victor.liu@nxp.com> > + > +description: | > + The Freescale i.MX8qxp Pixel Link to Display Pixel Interface(PXL2DPI) > + interfaces the pixel link 36-bit data output and the DSI controller’s > + MIPI-DPI 24-bit data input, and inputs of LVDS Display Bridge(LDB) module > + used in LVDS mode, to remap the pixel color codings between those modules. > + This module is purely combinatorial. > + > + The i.MX8qxp PXL2DPI is controlled by Control and Status Registers(CSR) module. > + The CSR module, as a system controller, contains the PXL2DPI's configuration > + register. So this node should be a child of the CSR. Ideally, this schema is also referenced from the CSR's schema (and if that doesn't exist, it should be there first). > + > +properties: > + compatible: > + const: fsl,imx8qxp-pxl2dpi > + > + fsl,sc-resource: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: The SCU resource ID associated with this PXL2DPI instance. > + > + power-domains: > + maxItems: 1 > + > + fsl,companion-pxl2dpi: > + $ref: /schemas/types.yaml#/definitions/phandle > + description: | > + A phandle which points to companion PXL2DPI which is used by downstream > + LVDS Display Bridge(LDB) in split mode. > + > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/properties/port > + description: The PXL2DPI input port node from pixel link. > + > + port@1: > + $ref: /schemas/graph.yaml#/properties/port > + description: The PXL2DPI output port node to downstream bridge. > + > + required: > + - port@0 > + - port@1 > + > +required: > + - compatible > + - fsl,sc-resource > + - power-domains > + - ports > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/firmware/imx/rsrc.h> > + pxl2dpi { > + compatible = "fsl,imx8qxp-pxl2dpi"; > + fsl,sc-resource = <IMX_SC_R_MIPI_0>; > + power-domains = <&pd IMX_SC_R_MIPI_0>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > + > + mipi_lvds_0_pxl2dpi_dc_pixel_link0: endpoint@0 { > + reg = <0>; > + remote-endpoint = <&dc_pixel_link0_mipi_lvds_0_pxl2dpi>; > + }; > + > + mipi_lvds_0_pxl2dpi_dc_pixel_link1: endpoint@1 { > + reg = <1>; > + remote-endpoint = <&dc_pixel_link1_mipi_lvds_0_pxl2dpi>; > + }; > + }; > + > + port@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <1>; > + > + mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 { > + reg = <0>; > + remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>; > + }; > + > + mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 { > + reg = <1>; > + remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>; > + }; > + }; > + }; > + }; > -- > 2.7.4 >
Hi Rob, On Fri, 2021-03-05 at 16:42 -0600, Rob Herring wrote: > On Thu, Feb 18, 2021 at 11:41:49AM +0800, Liu Ying wrote: > > This patch adds bindings for i.MX8qxp pixel link to DPI(PXL2DPI). > > > > Signed-off-by: Liu Ying <victor.liu@nxp.com> > > --- > > v3->v4: > > * Add 'fsl,sc-resource' property. (Rob) > > > > v2->v3: > > * Drop 'fsl,syscon' property. (Rob) > > * Mention the CSR module controls PXL2DPI. > > > > v1->v2: > > * Use graph schema. (Laurent) > > > > .../display/bridge/fsl,imx8qxp-pxl2dpi.yaml | 108 +++++++++++++++++++++ > > 1 file changed, 108 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml > > > > diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml > > new file mode 100644 > > index 00000000..e4e77fa > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml > > @@ -0,0 +1,108 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fdisplay%2Fbridge%2Ffsl%2Cimx8qxp-pxl2dpi.yaml%23&data=04%7C01%7Cvictor.liu%40nxp.com%7Ca37ec67ba3274bcea5c408d8e027f69b%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637505809544037562%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=UN2IQps7q5vK6uNG8fQTn1Klgn0cVyuYnUeqxrjCWHo%3D&reserved=0 > > +$schema: https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fmeta-schemas%2Fcore.yaml%23&data=04%7C01%7Cvictor.liu%40nxp.com%7Ca37ec67ba3274bcea5c408d8e027f69b%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637505809544037562%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=cvJVL3Fp1hwbjj1jO1YAozKdZATt5DJ78E7vGT%2F25Oc%3D&reserved=0 > > + > > +title: Freescale i.MX8qxp Pixel Link to Display Pixel Interface > > + > > +maintainers: > > + - Liu Ying <victor.liu@nxp.com> > > + > > +description: | > > + The Freescale i.MX8qxp Pixel Link to Display Pixel Interface(PXL2DPI) > > + interfaces the pixel link 36-bit data output and the DSI controller’s > > + MIPI-DPI 24-bit data input, and inputs of LVDS Display Bridge(LDB) module > > + used in LVDS mode, to remap the pixel color codings between those modules. > > + This module is purely combinatorial. > > + > > + The i.MX8qxp PXL2DPI is controlled by Control and Status Registers(CSR) module. > > + The CSR module, as a system controller, contains the PXL2DPI's configuration > > + register. > > So this node should be a child of the CSR. Ideally, this schema is also > referenced from the CSR's schema (and if that doesn't exist, it should > be there first). I can add a patch to introduce a schema for the CSR in this series, just prior to this patch. Do you think if that will be fine? Thanks, Liu Ying > > > + > > +properties: > > + compatible: > > + const: fsl,imx8qxp-pxl2dpi > > + > > + fsl,sc-resource: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + description: The SCU resource ID associated with this PXL2DPI instance. > > + > > + power-domains: > > + maxItems: 1 > > + > > + fsl,companion-pxl2dpi: > > + $ref: /schemas/types.yaml#/definitions/phandle > > + description: | > > + A phandle which points to companion PXL2DPI which is used by downstream > > + LVDS Display Bridge(LDB) in split mode. > > + > > + ports: > > + $ref: /schemas/graph.yaml#/properties/ports > > + > > + properties: > > + port@0: > > + $ref: /schemas/graph.yaml#/properties/port > > + description: The PXL2DPI input port node from pixel link. > > + > > + port@1: > > + $ref: /schemas/graph.yaml#/properties/port > > + description: The PXL2DPI output port node to downstream bridge. > > + > > + required: > > + - port@0 > > + - port@1 > > + > > +required: > > + - compatible > > + - fsl,sc-resource > > + - power-domains > > + - ports > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/firmware/imx/rsrc.h> > > + pxl2dpi { > > + compatible = "fsl,imx8qxp-pxl2dpi"; > > + fsl,sc-resource = <IMX_SC_R_MIPI_0>; > > + power-domains = <&pd IMX_SC_R_MIPI_0>; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@0 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + reg = <0>; > > + > > + mipi_lvds_0_pxl2dpi_dc_pixel_link0: endpoint@0 { > > + reg = <0>; > > + remote-endpoint = <&dc_pixel_link0_mipi_lvds_0_pxl2dpi>; > > + }; > > + > > + mipi_lvds_0_pxl2dpi_dc_pixel_link1: endpoint@1 { > > + reg = <1>; > > + remote-endpoint = <&dc_pixel_link1_mipi_lvds_0_pxl2dpi>; > > + }; > > + }; > > + > > + port@1 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + reg = <1>; > > + > > + mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 { > > + reg = <0>; > > + remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>; > > + }; > > + > > + mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 { > > + reg = <1>; > > + remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>; > > + }; > > + }; > > + }; > > + }; > > -- > > 2.7.4 > >
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml new file mode 100644 index 00000000..e4e77fa --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pxl2dpi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qxp Pixel Link to Display Pixel Interface + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +description: | + The Freescale i.MX8qxp Pixel Link to Display Pixel Interface(PXL2DPI) + interfaces the pixel link 36-bit data output and the DSI controller’s + MIPI-DPI 24-bit data input, and inputs of LVDS Display Bridge(LDB) module + used in LVDS mode, to remap the pixel color codings between those modules. + This module is purely combinatorial. + + The i.MX8qxp PXL2DPI is controlled by Control and Status Registers(CSR) module. + The CSR module, as a system controller, contains the PXL2DPI's configuration + register. + +properties: + compatible: + const: fsl,imx8qxp-pxl2dpi + + fsl,sc-resource: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The SCU resource ID associated with this PXL2DPI instance. + + power-domains: + maxItems: 1 + + fsl,companion-pxl2dpi: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + A phandle which points to companion PXL2DPI which is used by downstream + LVDS Display Bridge(LDB) in split mode. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: The PXL2DPI input port node from pixel link. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: The PXL2DPI output port node to downstream bridge. + + required: + - port@0 + - port@1 + +required: + - compatible + - fsl,sc-resource + - power-domains + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/firmware/imx/rsrc.h> + pxl2dpi { + compatible = "fsl,imx8qxp-pxl2dpi"; + fsl,sc-resource = <IMX_SC_R_MIPI_0>; + power-domains = <&pd IMX_SC_R_MIPI_0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + mipi_lvds_0_pxl2dpi_dc_pixel_link0: endpoint@0 { + reg = <0>; + remote-endpoint = <&dc_pixel_link0_mipi_lvds_0_pxl2dpi>; + }; + + mipi_lvds_0_pxl2dpi_dc_pixel_link1: endpoint@1 { + reg = <1>; + remote-endpoint = <&dc_pixel_link1_mipi_lvds_0_pxl2dpi>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 { + reg = <0>; + remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>; + }; + + mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 { + reg = <1>; + remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>; + }; + }; + }; + };
This patch adds bindings for i.MX8qxp pixel link to DPI(PXL2DPI). Signed-off-by: Liu Ying <victor.liu@nxp.com> --- v3->v4: * Add 'fsl,sc-resource' property. (Rob) v2->v3: * Drop 'fsl,syscon' property. (Rob) * Mention the CSR module controls PXL2DPI. v1->v2: * Use graph schema. (Laurent) .../display/bridge/fsl,imx8qxp-pxl2dpi.yaml | 108 +++++++++++++++++++++ 1 file changed, 108 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml