| Message ID | 20210316194918.3528417-1-robh@kernel.org |
|---|---|
| State | New |
| Headers | show |
| Series | dt-bindings: Clean-up undocumented compatible strings | expand |
On Tue, Mar 16, 2021 at 01:49:18PM -0600, Rob Herring wrote: > Adding checks for undocumented compatible strings reveals a bunch of > warnings in the DT binding examples. Fix the cases which are typos, just > a mismatch between the schema and the example, or aren't documented at all. > In a couple of cases, fixing the compatible revealed some schema errors > which are fixed. > > There's a bunch of others remaining after this which have bindings, but > those aren't converted to schema yet. > > Cc: Stephen Boyd <sboyd@kernel.org> > Cc: Maxime Ripard <mripard@kernel.org> > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Sam Ravnborg <sam@ravnborg.org> > Cc: Vinod Koul <vkoul@kernel.org> > Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> > Cc: Jonathan Cameron <jic23@kernel.org> > Cc: Pavel Machek <pavel@ucw.cz> > Cc: Kishon Vijay Abraham I <kishon@ti.com> > Cc: Sebastian Reichel <sre@kernel.org> > Cc: Mark Brown <broonie@kernel.org> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Cc: linux-clk@vger.kernel.org > Cc: dmaengine@vger.kernel.org > Cc: linux-i3c@lists.infradead.org > Cc: linux-iio@vger.kernel.org > Cc: linux-leds@vger.kernel.org > Cc: linux-pm@vger.kernel.org > Cc: linux-serial@vger.kernel.org > Cc: linux-spi@vger.kernel.org > Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hi, On Tue, Mar 16, 2021 at 01:49:18PM -0600, Rob Herring wrote: > Adding checks for undocumented compatible strings reveals a bunch of > warnings in the DT binding examples. Fix the cases which are typos, just > a mismatch between the schema and the example, or aren't documented at all. > In a couple of cases, fixing the compatible revealed some schema errors > which are fixed. > > There's a bunch of others remaining after this which have bindings, but > those aren't converted to schema yet. > > Cc: Stephen Boyd <sboyd@kernel.org> > Cc: Maxime Ripard <mripard@kernel.org> > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Sam Ravnborg <sam@ravnborg.org> > Cc: Vinod Koul <vkoul@kernel.org> > Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> > Cc: Jonathan Cameron <jic23@kernel.org> > Cc: Pavel Machek <pavel@ucw.cz> > Cc: Kishon Vijay Abraham I <kishon@ti.com> > Cc: Sebastian Reichel <sre@kernel.org> > Cc: Mark Brown <broonie@kernel.org> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Cc: linux-clk@vger.kernel.org > Cc: dmaengine@vger.kernel.org > Cc: linux-i3c@lists.infradead.org > Cc: linux-iio@vger.kernel.org > Cc: linux-leds@vger.kernel.org > Cc: linux-pm@vger.kernel.org > Cc: linux-serial@vger.kernel.org > Cc: linux-spi@vger.kernel.org > Signed-off-by: Rob Herring <robh@kernel.org> > --- Acked-by: Sebastian Reichel <sre@kernel.org> -- Sebastian > .../clock/allwinner,sun4i-a10-pll1-clk.yaml | 2 +- > .../bindings/clock/milbeaut-clock.yaml | 12 +++++---- > .../bindings/display/brcm,bcm2835-dsi0.yaml | 6 ----- > .../bindings/display/panel/panel-dpi.yaml | 2 +- > .../devicetree/bindings/dma/qcom,gpi.yaml | 2 +- > .../devicetree/bindings/i3c/i3c.yaml | 7 ++--- > .../iio/adc/brcm,iproc-static-adc.yaml | 5 ---- > .../iio/gyroscope/nxp,fxas21002c.yaml | 2 +- > .../bindings/iio/light/upisemi,us5182.yaml | 4 +-- > .../interrupt-controller/loongson,htpic.yaml | 2 +- > .../devicetree/bindings/leds/leds-lgm.yaml | 26 ++++++++++++++++--- > .../bindings/phy/ti,phy-j721e-wiz.yaml | 2 +- > .../bindings/power/supply/cw2015_battery.yaml | 2 +- > .../bindings/power/supply/power-supply.yaml | 22 ---------------- > .../devicetree/bindings/serial/serial.yaml | 2 +- > .../bindings/spi/amlogic,meson-gx-spicc.yaml | 4 +-- > .../bindings/spi/spi-controller.yaml | 21 ++++++++------- > .../devicetree/bindings/spi/spi-mux.yaml | 8 ++---- > .../devicetree/bindings/spi/st,stm32-spi.yaml | 6 ----- > 19 files changed, 58 insertions(+), 79 deletions(-) > > diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml > index e9c4cf834aa7..e5d9d45dab8a 100644 > --- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml > +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml > @@ -44,7 +44,7 @@ examples: > - | > clk@1c20000 { > #clock-cells = <0>; > - compatible = "allwinner,sun4i-a10-pll1"; > + compatible = "allwinner,sun4i-a10-pll1-clk"; > reg = <0x01c20000 0x4>; > clocks = <&osc24M>; > clock-output-names = "osc24M"; > diff --git a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml > index 0e8b07710451..6d39344d2b70 100644 > --- a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml > +++ b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml > @@ -18,10 +18,12 @@ description: | > > properties: > compatible: > - oneOf: > - - items: > - - enum: > - - socionext,milbeaut-m10v-ccu > + enum: > + - socionext,milbeaut-m10v-ccu > + > + reg: > + maxItems: 1 > + > clocks: > maxItems: 1 > description: external clock > @@ -41,7 +43,7 @@ examples: > # Clock controller node: > - | > m10v-clk-ctrl@1d021000 { > - compatible = "socionext,milbeaut-m10v-clk-ccu"; > + compatible = "socionext,milbeaut-m10v-ccu"; > reg = <0x1d021000 0x4000>; > #clock-cells = <1>; > clocks = <&clki40mhz>; > diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml > index 55c60919991f..32608578a352 100644 > --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml > +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml > @@ -77,12 +77,6 @@ examples: > > clock-output-names = "dsi1_byte", "dsi1_ddr2", "dsi1_ddr"; > > - pitouchscreen: panel@0 { > - compatible = "raspberrypi,touchscreen"; > - reg = <0>; > - > - /* ... */ > - }; > }; > > ... > diff --git a/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml b/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml > index 0cd74c8dab42..dae0676b5c6e 100644 > --- a/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml > +++ b/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml > @@ -40,7 +40,7 @@ additionalProperties: false > examples: > - | > panel { > - compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; > + compatible = "startek,startek-kd050c", "panel-dpi"; > label = "osddisplay"; > power-supply = <&vcc_supply>; > backlight = <&backlight>; > diff --git a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml > index f8142adf9aea..2e66840a78fe 100644 > --- a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml > +++ b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml > @@ -64,7 +64,7 @@ examples: > #include <dt-bindings/interrupt-controller/arm-gic.h> > #include <dt-bindings/dma/qcom-gpi.h> > gpi_dma0: dma-controller@800000 { > - compatible = "qcom,gpi-dma"; > + compatible = "qcom,sdm845-gpi-dma"; > #dma-cells = <3>; > reg = <0x00800000 0x60000>; > iommus = <&apps_smmu 0x0016 0x0>; > diff --git a/Documentation/devicetree/bindings/i3c/i3c.yaml b/Documentation/devicetree/bindings/i3c/i3c.yaml > index 52042aa44d19..1f82fc923799 100644 > --- a/Documentation/devicetree/bindings/i3c/i3c.yaml > +++ b/Documentation/devicetree/bindings/i3c/i3c.yaml > @@ -157,9 +157,10 @@ examples: > i2c-scl-hz = <100000>; > > /* I2C device. */ > - nunchuk: nunchuk@52 { > - compatible = "nintendo,nunchuk"; > - reg = <0x52 0x0 0x10>; > + eeprom@57 { > + compatible = "atmel,24c01"; > + reg = <0x57 0x0 0x10>; > + pagesize = <0x8>; > }; > > /* I3C device with a static I2C address. */ > diff --git a/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.yaml b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.yaml > index c562d25bee3b..547697e8bc8b 100644 > --- a/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.yaml > @@ -53,11 +53,6 @@ examples: > #address-cells = <1>; > #size-cells = <1>; > > - ts_adc_syscon: ts_adc_syscon@180a6000 { > - compatible = "brcm,iproc-ts-adc-syscon","syscon"; > - reg = <0x180a6000 0xc30>; > - }; > - > adc { > compatible = "brcm,iproc-static-adc"; > adc-syscon = <&ts_adc_syscon>; > diff --git a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml > index d97ee774d6a6..3f57a1b813e6 100644 > --- a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml > +++ b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml > @@ -83,7 +83,7 @@ examples: > #size-cells = <0>; > > gyroscope@0 { > - compatible = "nxp,fxas2102c"; > + compatible = "nxp,fxas21002c"; > reg = <0x0>; > > spi-max-frequency = <2000000>; > diff --git a/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml b/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml > index de5882cb3360..dd78abe0ec8d 100644 > --- a/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml > +++ b/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml > @@ -11,12 +11,12 @@ maintainers: > > properties: > compatible: > - const: upisemi,asd5182 > + const: upisemi,usd5182 > > reg: > maxItems: 1 > > - upsemi,glass-coef: > + upisemi,glass-coef: > $ref: /schemas/types.yaml#/definitions/uint32 > description: | > glass attenuation factor - compensation factor of resolution 1000 > diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml > index d1d52d1db2be..d6bc1a687fc7 100644 > --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml > +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml > @@ -47,7 +47,7 @@ examples: > - | > #include <dt-bindings/interrupt-controller/irq.h> > htintc: interrupt-controller@1fb000080 { > - compatible = "loongson,htintc-1.0"; > + compatible = "loongson,htpic-1.0"; > reg = <0xfb000080 0x40>; > interrupt-controller; > #interrupt-cells = <1>; > diff --git a/Documentation/devicetree/bindings/leds/leds-lgm.yaml b/Documentation/devicetree/bindings/leds/leds-lgm.yaml > index 32bbf146c01d..f8d7963c3a13 100644 > --- a/Documentation/devicetree/bindings/leds/leds-lgm.yaml > +++ b/Documentation/devicetree/bindings/leds/leds-lgm.yaml > @@ -14,6 +14,17 @@ properties: > compatible: > const: intel,lgm-ssoled > > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 2 > + > + clock-names: > + items: > + - const: sso > + - const: fpid > + > gpio-controller: true > > '#gpio-cells': > @@ -36,8 +47,15 @@ properties: > > additionalProperties: false > > + properties: > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > patternProperties: > - "^led@[0-23]$": > + "^led@[0-2]$": > type: object > > properties: > @@ -81,7 +99,7 @@ examples: > #include <dt-bindings/leds/common.h> > > ssogpio: ssogpio@e0d40000 { > - compatible = "intel,sso-led"; > + compatible = "intel,lgm-ssoled"; > reg = <0xE0D40000 0x2E4>; > gpio-controller; > #gpio-cells = <2>; > @@ -103,8 +121,8 @@ examples: > led-gpio = <&ssogpio 0 0>; > }; > > - led@23 { > - reg = <23>; > + led@2 { > + reg = <2>; > function = LED_FUNCTION_POWER; > color = <LED_COLOR_ID_GREEN>; > led-gpio = <&ssogpio 23 0>; > diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml > index bbbd85501ada..d0040255c591 100644 > --- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml > +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml > @@ -218,7 +218,7 @@ examples: > }; > > serdes@5000000 { > - compatible = "cdns,ti,sierra-phy-t0"; > + compatible = "ti,sierra-phy-t0"; > reg-names = "serdes"; > reg = <0x5000000 0x10000>; > #address-cells = <1>; > diff --git a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml > index 5fcdf5801536..c73abb2ff513 100644 > --- a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml > +++ b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml > @@ -61,7 +61,7 @@ examples: > #size-cells = <0>; > > cw2015@62 { > - compatible = "cellwise,cw201x"; > + compatible = "cellwise,cw2015"; > reg = <0x62>; > cellwise,battery-profile = /bits/ 8 < > 0x17 0x67 0x80 0x73 0x6E 0x6C 0x6B 0x63 > diff --git a/Documentation/devicetree/bindings/power/supply/power-supply.yaml b/Documentation/devicetree/bindings/power/supply/power-supply.yaml > index c5c55f627251..259760167759 100644 > --- a/Documentation/devicetree/bindings/power/supply/power-supply.yaml > +++ b/Documentation/devicetree/bindings/power/supply/power-supply.yaml > @@ -18,25 +18,3 @@ properties: > > additionalProperties: true > > -examples: > - - | > - power { > - #address-cells = <1>; > - #size-cells = <0>; > - > - usb_charger:charger@e { > - compatible = "some,usb-charger"; > - reg = <0xe>; > - }; > - > - ac_charger:charger@c { > - compatible = "some,ac-charger"; > - reg = <0xc>; > - }; > - > - battery:battery@b { > - compatible = "some,battery"; > - reg = <0xb>; > - power-supplies = <&usb_charger>, <&ac_charger>; > - }; > - }; > diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml > index 65e75d040521..eea300405816 100644 > --- a/Documentation/devicetree/bindings/serial/serial.yaml > +++ b/Documentation/devicetree/bindings/serial/serial.yaml > @@ -134,7 +134,7 @@ examples: > interrupts = <1>; > > bluetooth { > - compatible = "brcm,bcm43341-bt"; > + compatible = "brcm,bcm4330-bt"; > interrupt-parent = <&gpio>; > interrupts = <10>; > }; > diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml > index 667dedefd69f..e3fb553d9180 100644 > --- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml > +++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml > @@ -90,8 +90,8 @@ examples: > #address-cells = <1>; > #size-cells = <0>; > > - ethernet-switch@0 { > - compatible = "micrel,ks8995m"; > + display@0 { > + compatible = "lg,lg4573"; > spi-max-frequency = <1000000>; > reg = <0>; > }; > diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml > index 06786f1b43d2..0477396e4945 100644 > --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml > +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml > @@ -181,22 +181,23 @@ additionalProperties: true > > examples: > - | > - spi@f00 { > + spi@80010000 { > #address-cells = <1>; > #size-cells = <0>; > - compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; > - reg = <0xf00 0x20>; > - interrupts = <2 13 0 2 14 0>; > - interrupt-parent = <&mpc5200_pic>; > - > - ethernet-switch@0 { > - compatible = "micrel,ks8995m"; > + compatible = "fsl,imx28-spi"; > + reg = <0x80010000 0x2000>; > + interrupts = <96>; > + dmas = <&dma_apbh 0>; > + dma-names = "rx-tx"; > + > + display@0 { > + compatible = "lg,lg4573"; > spi-max-frequency = <1000000>; > reg = <0>; > }; > > - codec@1 { > - compatible = "ti,tlv320aic26"; > + sensor@1 { > + compatible = "bosch,bme680"; > spi-max-frequency = <100000>; > reg = <1>; > }; > diff --git a/Documentation/devicetree/bindings/spi/spi-mux.yaml b/Documentation/devicetree/bindings/spi/spi-mux.yaml > index 6c21a132b51f..d09c6355e22d 100644 > --- a/Documentation/devicetree/bindings/spi/spi-mux.yaml > +++ b/Documentation/devicetree/bindings/spi/spi-mux.yaml > @@ -75,16 +75,12 @@ examples: > spi-flash@0 { > compatible = "jedec,spi-nor"; > reg = <0>; > - #address-cells = <1>; > - #size-cells = <0>; > spi-max-frequency = <40000000>; > }; > > - spi-device@1 { > - compatible = "lineartechnology,ltc2488"; > + sensor@1 { > + compatible = "bosch,bme680"; > reg = <1>; > - #address-cells = <1>; > - #size-cells = <0>; > spi-max-frequency = <10000000>; > }; > }; > diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml > index d11806b1ede3..2d9af4c506bb 100644 > --- a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml > +++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml > @@ -96,12 +96,6 @@ examples: > dma-names = "rx", "tx"; > cs-gpios = <&gpioa 11 0>; > > - aardvark@0 { > - compatible = "totalphase,aardvark"; > - reg = <0>; > - spi-max-frequency = <4000000>; > - st,spi-midi-ns = <4000>; > - }; > }; > > ... > -- > 2.27.0 >
On 16-03-21, 13:49, Rob Herring wrote: > --- > .../clock/allwinner,sun4i-a10-pll1-clk.yaml | 2 +- > .../bindings/clock/milbeaut-clock.yaml | 12 +++++---- > .../bindings/display/brcm,bcm2835-dsi0.yaml | 6 ----- > .../bindings/display/panel/panel-dpi.yaml | 2 +- > .../devicetree/bindings/dma/qcom,gpi.yaml | 2 +- ... > .../bindings/phy/ti,phy-j721e-wiz.yaml | 2 +- Acked-By: Vinod Koul <vkoul@kernel.org>
On Tue, Mar 16, 2021 at 01:49:18PM -0600, Rob Herring wrote: > Adding checks for undocumented compatible strings reveals a bunch of > warnings in the DT binding examples. Fix the cases which are typos, just > a mismatch between the schema and the example, or aren't documented at all. > In a couple of cases, fixing the compatible revealed some schema errors > which are fixed. > > There's a bunch of others remaining after this which have bindings, but > those aren't converted to schema yet. > > Cc: Stephen Boyd <sboyd@kernel.org> > Cc: Maxime Ripard <mripard@kernel.org> > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Sam Ravnborg <sam@ravnborg.org> > Cc: Vinod Koul <vkoul@kernel.org> > Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> > Cc: Jonathan Cameron <jic23@kernel.org> > Cc: Pavel Machek <pavel@ucw.cz> > Cc: Kishon Vijay Abraham I <kishon@ti.com> > Cc: Sebastian Reichel <sre@kernel.org> > Cc: Mark Brown <broonie@kernel.org> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Cc: linux-clk@vger.kernel.org > Cc: dmaengine@vger.kernel.org > Cc: linux-i3c@lists.infradead.org > Cc: linux-iio@vger.kernel.org > Cc: linux-leds@vger.kernel.org > Cc: linux-pm@vger.kernel.org > Cc: linux-serial@vger.kernel.org > Cc: linux-spi@vger.kernel.org > Signed-off-by: Rob Herring <robh@kernel.org> > --- > .../clock/allwinner,sun4i-a10-pll1-clk.yaml | 2 +- > .../bindings/clock/milbeaut-clock.yaml | 12 +++++---- > .../bindings/display/brcm,bcm2835-dsi0.yaml | 6 ----- > .../bindings/display/panel/panel-dpi.yaml | 2 +- > .../devicetree/bindings/dma/qcom,gpi.yaml | 2 +- > .../devicetree/bindings/i3c/i3c.yaml | 7 ++--- > .../iio/adc/brcm,iproc-static-adc.yaml | 5 ---- > .../iio/gyroscope/nxp,fxas21002c.yaml | 2 +- > .../bindings/iio/light/upisemi,us5182.yaml | 4 +-- > .../interrupt-controller/loongson,htpic.yaml | 2 +- > .../devicetree/bindings/leds/leds-lgm.yaml | 26 ++++++++++++++++--- > .../bindings/phy/ti,phy-j721e-wiz.yaml | 2 +- > .../bindings/power/supply/cw2015_battery.yaml | 2 +- > .../bindings/power/supply/power-supply.yaml | 22 ---------------- > .../devicetree/bindings/serial/serial.yaml | 2 +- > .../bindings/spi/amlogic,meson-gx-spicc.yaml | 4 +-- > .../bindings/spi/spi-controller.yaml | 21 ++++++++------- > .../devicetree/bindings/spi/spi-mux.yaml | 8 ++---- > .../devicetree/bindings/spi/st,stm32-spi.yaml | 6 ----- Acked-by: Alain Volmat <alain.volmat@foss.st.com> > 19 files changed, 58 insertions(+), 79 deletions(-) > > diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml > index e9c4cf834aa7..e5d9d45dab8a 100644 > --- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml > +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml > @@ -44,7 +44,7 @@ examples: > - | > clk@1c20000 { > #clock-cells = <0>; > - compatible = "allwinner,sun4i-a10-pll1"; > + compatible = "allwinner,sun4i-a10-pll1-clk"; > reg = <0x01c20000 0x4>; > clocks = <&osc24M>; > clock-output-names = "osc24M"; > diff --git a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml > index 0e8b07710451..6d39344d2b70 100644 > --- a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml > +++ b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml > @@ -18,10 +18,12 @@ description: | > > properties: > compatible: > - oneOf: > - - items: > - - enum: > - - socionext,milbeaut-m10v-ccu > + enum: > + - socionext,milbeaut-m10v-ccu > + > + reg: > + maxItems: 1 > + > clocks: > maxItems: 1 > description: external clock > @@ -41,7 +43,7 @@ examples: > # Clock controller node: > - | > m10v-clk-ctrl@1d021000 { > - compatible = "socionext,milbeaut-m10v-clk-ccu"; > + compatible = "socionext,milbeaut-m10v-ccu"; > reg = <0x1d021000 0x4000>; > #clock-cells = <1>; > clocks = <&clki40mhz>; > diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml > index 55c60919991f..32608578a352 100644 > --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml > +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml > @@ -77,12 +77,6 @@ examples: > > clock-output-names = "dsi1_byte", "dsi1_ddr2", "dsi1_ddr"; > > - pitouchscreen: panel@0 { > - compatible = "raspberrypi,touchscreen"; > - reg = <0>; > - > - /* ... */ > - }; > }; > > ... > diff --git a/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml b/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml > index 0cd74c8dab42..dae0676b5c6e 100644 > --- a/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml > +++ b/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml > @@ -40,7 +40,7 @@ additionalProperties: false > examples: > - | > panel { > - compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; > + compatible = "startek,startek-kd050c", "panel-dpi"; > label = "osddisplay"; > power-supply = <&vcc_supply>; > backlight = <&backlight>; > diff --git a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml > index f8142adf9aea..2e66840a78fe 100644 > --- a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml > +++ b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml > @@ -64,7 +64,7 @@ examples: > #include <dt-bindings/interrupt-controller/arm-gic.h> > #include <dt-bindings/dma/qcom-gpi.h> > gpi_dma0: dma-controller@800000 { > - compatible = "qcom,gpi-dma"; > + compatible = "qcom,sdm845-gpi-dma"; > #dma-cells = <3>; > reg = <0x00800000 0x60000>; > iommus = <&apps_smmu 0x0016 0x0>; > diff --git a/Documentation/devicetree/bindings/i3c/i3c.yaml b/Documentation/devicetree/bindings/i3c/i3c.yaml > index 52042aa44d19..1f82fc923799 100644 > --- a/Documentation/devicetree/bindings/i3c/i3c.yaml > +++ b/Documentation/devicetree/bindings/i3c/i3c.yaml > @@ -157,9 +157,10 @@ examples: > i2c-scl-hz = <100000>; > > /* I2C device. */ > - nunchuk: nunchuk@52 { > - compatible = "nintendo,nunchuk"; > - reg = <0x52 0x0 0x10>; > + eeprom@57 { > + compatible = "atmel,24c01"; > + reg = <0x57 0x0 0x10>; > + pagesize = <0x8>; > }; > > /* I3C device with a static I2C address. */ > diff --git a/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.yaml b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.yaml > index c562d25bee3b..547697e8bc8b 100644 > --- a/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.yaml > @@ -53,11 +53,6 @@ examples: > #address-cells = <1>; > #size-cells = <1>; > > - ts_adc_syscon: ts_adc_syscon@180a6000 { > - compatible = "brcm,iproc-ts-adc-syscon","syscon"; > - reg = <0x180a6000 0xc30>; > - }; > - > adc { > compatible = "brcm,iproc-static-adc"; > adc-syscon = <&ts_adc_syscon>; > diff --git a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml > index d97ee774d6a6..3f57a1b813e6 100644 > --- a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml > +++ b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml > @@ -83,7 +83,7 @@ examples: > #size-cells = <0>; > > gyroscope@0 { > - compatible = "nxp,fxas2102c"; > + compatible = "nxp,fxas21002c"; > reg = <0x0>; > > spi-max-frequency = <2000000>; > diff --git a/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml b/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml > index de5882cb3360..dd78abe0ec8d 100644 > --- a/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml > +++ b/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml > @@ -11,12 +11,12 @@ maintainers: > > properties: > compatible: > - const: upisemi,asd5182 > + const: upisemi,usd5182 > > reg: > maxItems: 1 > > - upsemi,glass-coef: > + upisemi,glass-coef: > $ref: /schemas/types.yaml#/definitions/uint32 > description: | > glass attenuation factor - compensation factor of resolution 1000 > diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml > index d1d52d1db2be..d6bc1a687fc7 100644 > --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml > +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml > @@ -47,7 +47,7 @@ examples: > - | > #include <dt-bindings/interrupt-controller/irq.h> > htintc: interrupt-controller@1fb000080 { > - compatible = "loongson,htintc-1.0"; > + compatible = "loongson,htpic-1.0"; > reg = <0xfb000080 0x40>; > interrupt-controller; > #interrupt-cells = <1>; > diff --git a/Documentation/devicetree/bindings/leds/leds-lgm.yaml b/Documentation/devicetree/bindings/leds/leds-lgm.yaml > index 32bbf146c01d..f8d7963c3a13 100644 > --- a/Documentation/devicetree/bindings/leds/leds-lgm.yaml > +++ b/Documentation/devicetree/bindings/leds/leds-lgm.yaml > @@ -14,6 +14,17 @@ properties: > compatible: > const: intel,lgm-ssoled > > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 2 > + > + clock-names: > + items: > + - const: sso > + - const: fpid > + > gpio-controller: true > > '#gpio-cells': > @@ -36,8 +47,15 @@ properties: > > additionalProperties: false > > + properties: > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > patternProperties: > - "^led@[0-23]$": > + "^led@[0-2]$": > type: object > > properties: > @@ -81,7 +99,7 @@ examples: > #include <dt-bindings/leds/common.h> > > ssogpio: ssogpio@e0d40000 { > - compatible = "intel,sso-led"; > + compatible = "intel,lgm-ssoled"; > reg = <0xE0D40000 0x2E4>; > gpio-controller; > #gpio-cells = <2>; > @@ -103,8 +121,8 @@ examples: > led-gpio = <&ssogpio 0 0>; > }; > > - led@23 { > - reg = <23>; > + led@2 { > + reg = <2>; > function = LED_FUNCTION_POWER; > color = <LED_COLOR_ID_GREEN>; > led-gpio = <&ssogpio 23 0>; > diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml > index bbbd85501ada..d0040255c591 100644 > --- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml > +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml > @@ -218,7 +218,7 @@ examples: > }; > > serdes@5000000 { > - compatible = "cdns,ti,sierra-phy-t0"; > + compatible = "ti,sierra-phy-t0"; > reg-names = "serdes"; > reg = <0x5000000 0x10000>; > #address-cells = <1>; > diff --git a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml > index 5fcdf5801536..c73abb2ff513 100644 > --- a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml > +++ b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml > @@ -61,7 +61,7 @@ examples: > #size-cells = <0>; > > cw2015@62 { > - compatible = "cellwise,cw201x"; > + compatible = "cellwise,cw2015"; > reg = <0x62>; > cellwise,battery-profile = /bits/ 8 < > 0x17 0x67 0x80 0x73 0x6E 0x6C 0x6B 0x63 > diff --git a/Documentation/devicetree/bindings/power/supply/power-supply.yaml b/Documentation/devicetree/bindings/power/supply/power-supply.yaml > index c5c55f627251..259760167759 100644 > --- a/Documentation/devicetree/bindings/power/supply/power-supply.yaml > +++ b/Documentation/devicetree/bindings/power/supply/power-supply.yaml > @@ -18,25 +18,3 @@ properties: > > additionalProperties: true > > -examples: > - - | > - power { > - #address-cells = <1>; > - #size-cells = <0>; > - > - usb_charger:charger@e { > - compatible = "some,usb-charger"; > - reg = <0xe>; > - }; > - > - ac_charger:charger@c { > - compatible = "some,ac-charger"; > - reg = <0xc>; > - }; > - > - battery:battery@b { > - compatible = "some,battery"; > - reg = <0xb>; > - power-supplies = <&usb_charger>, <&ac_charger>; > - }; > - }; > diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml > index 65e75d040521..eea300405816 100644 > --- a/Documentation/devicetree/bindings/serial/serial.yaml > +++ b/Documentation/devicetree/bindings/serial/serial.yaml > @@ -134,7 +134,7 @@ examples: > interrupts = <1>; > > bluetooth { > - compatible = "brcm,bcm43341-bt"; > + compatible = "brcm,bcm4330-bt"; > interrupt-parent = <&gpio>; > interrupts = <10>; > }; > diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml > index 667dedefd69f..e3fb553d9180 100644 > --- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml > +++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml > @@ -90,8 +90,8 @@ examples: > #address-cells = <1>; > #size-cells = <0>; > > - ethernet-switch@0 { > - compatible = "micrel,ks8995m"; > + display@0 { > + compatible = "lg,lg4573"; > spi-max-frequency = <1000000>; > reg = <0>; > }; > diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml > index 06786f1b43d2..0477396e4945 100644 > --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml > +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml > @@ -181,22 +181,23 @@ additionalProperties: true > > examples: > - | > - spi@f00 { > + spi@80010000 { > #address-cells = <1>; > #size-cells = <0>; > - compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; > - reg = <0xf00 0x20>; > - interrupts = <2 13 0 2 14 0>; > - interrupt-parent = <&mpc5200_pic>; > - > - ethernet-switch@0 { > - compatible = "micrel,ks8995m"; > + compatible = "fsl,imx28-spi"; > + reg = <0x80010000 0x2000>; > + interrupts = <96>; > + dmas = <&dma_apbh 0>; > + dma-names = "rx-tx"; > + > + display@0 { > + compatible = "lg,lg4573"; > spi-max-frequency = <1000000>; > reg = <0>; > }; > > - codec@1 { > - compatible = "ti,tlv320aic26"; > + sensor@1 { > + compatible = "bosch,bme680"; > spi-max-frequency = <100000>; > reg = <1>; > }; > diff --git a/Documentation/devicetree/bindings/spi/spi-mux.yaml b/Documentation/devicetree/bindings/spi/spi-mux.yaml > index 6c21a132b51f..d09c6355e22d 100644 > --- a/Documentation/devicetree/bindings/spi/spi-mux.yaml > +++ b/Documentation/devicetree/bindings/spi/spi-mux.yaml > @@ -75,16 +75,12 @@ examples: > spi-flash@0 { > compatible = "jedec,spi-nor"; > reg = <0>; > - #address-cells = <1>; > - #size-cells = <0>; > spi-max-frequency = <40000000>; > }; > > - spi-device@1 { > - compatible = "lineartechnology,ltc2488"; > + sensor@1 { > + compatible = "bosch,bme680"; > reg = <1>; > - #address-cells = <1>; > - #size-cells = <0>; > spi-max-frequency = <10000000>; > }; > }; > diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml > index d11806b1ede3..2d9af4c506bb 100644 > --- a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml > +++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml > @@ -96,12 +96,6 @@ examples: > dma-names = "rx", "tx"; > cs-gpios = <&gpioa 11 0>; > > - aardvark@0 { > - compatible = "totalphase,aardvark"; > - reg = <0>; > - spi-max-frequency = <4000000>; > - st,spi-midi-ns = <4000>; > - }; > }; > > ... > -- > 2.27.0 >
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml index e9c4cf834aa7..e5d9d45dab8a 100644 --- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml @@ -44,7 +44,7 @@ examples: - | clk@1c20000 { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1"; + compatible = "allwinner,sun4i-a10-pll1-clk"; reg = <0x01c20000 0x4>; clocks = <&osc24M>; clock-output-names = "osc24M"; diff --git a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml index 0e8b07710451..6d39344d2b70 100644 --- a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml +++ b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml @@ -18,10 +18,12 @@ description: | properties: compatible: - oneOf: - - items: - - enum: - - socionext,milbeaut-m10v-ccu + enum: + - socionext,milbeaut-m10v-ccu + + reg: + maxItems: 1 + clocks: maxItems: 1 description: external clock @@ -41,7 +43,7 @@ examples: # Clock controller node: - | m10v-clk-ctrl@1d021000 { - compatible = "socionext,milbeaut-m10v-clk-ccu"; + compatible = "socionext,milbeaut-m10v-ccu"; reg = <0x1d021000 0x4000>; #clock-cells = <1>; clocks = <&clki40mhz>; diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml index 55c60919991f..32608578a352 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml @@ -77,12 +77,6 @@ examples: clock-output-names = "dsi1_byte", "dsi1_ddr2", "dsi1_ddr"; - pitouchscreen: panel@0 { - compatible = "raspberrypi,touchscreen"; - reg = <0>; - - /* ... */ - }; }; ... diff --git a/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml b/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml index 0cd74c8dab42..dae0676b5c6e 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml @@ -40,7 +40,7 @@ additionalProperties: false examples: - | panel { - compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; + compatible = "startek,startek-kd050c", "panel-dpi"; label = "osddisplay"; power-supply = <&vcc_supply>; backlight = <&backlight>; diff --git a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml index f8142adf9aea..2e66840a78fe 100644 --- a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml +++ b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml @@ -64,7 +64,7 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/dma/qcom-gpi.h> gpi_dma0: dma-controller@800000 { - compatible = "qcom,gpi-dma"; + compatible = "qcom,sdm845-gpi-dma"; #dma-cells = <3>; reg = <0x00800000 0x60000>; iommus = <&apps_smmu 0x0016 0x0>; diff --git a/Documentation/devicetree/bindings/i3c/i3c.yaml b/Documentation/devicetree/bindings/i3c/i3c.yaml index 52042aa44d19..1f82fc923799 100644 --- a/Documentation/devicetree/bindings/i3c/i3c.yaml +++ b/Documentation/devicetree/bindings/i3c/i3c.yaml @@ -157,9 +157,10 @@ examples: i2c-scl-hz = <100000>; /* I2C device. */ - nunchuk: nunchuk@52 { - compatible = "nintendo,nunchuk"; - reg = <0x52 0x0 0x10>; + eeprom@57 { + compatible = "atmel,24c01"; + reg = <0x57 0x0 0x10>; + pagesize = <0x8>; }; /* I3C device with a static I2C address. */ diff --git a/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.yaml b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.yaml index c562d25bee3b..547697e8bc8b 100644 --- a/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.yaml @@ -53,11 +53,6 @@ examples: #address-cells = <1>; #size-cells = <1>; - ts_adc_syscon: ts_adc_syscon@180a6000 { - compatible = "brcm,iproc-ts-adc-syscon","syscon"; - reg = <0x180a6000 0xc30>; - }; - adc { compatible = "brcm,iproc-static-adc"; adc-syscon = <&ts_adc_syscon>; diff --git a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml index d97ee774d6a6..3f57a1b813e6 100644 --- a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml +++ b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml @@ -83,7 +83,7 @@ examples: #size-cells = <0>; gyroscope@0 { - compatible = "nxp,fxas2102c"; + compatible = "nxp,fxas21002c"; reg = <0x0>; spi-max-frequency = <2000000>; diff --git a/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml b/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml index de5882cb3360..dd78abe0ec8d 100644 --- a/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml +++ b/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml @@ -11,12 +11,12 @@ maintainers: properties: compatible: - const: upisemi,asd5182 + const: upisemi,usd5182 reg: maxItems: 1 - upsemi,glass-coef: + upisemi,glass-coef: $ref: /schemas/types.yaml#/definitions/uint32 description: | glass attenuation factor - compensation factor of resolution 1000 diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml index d1d52d1db2be..d6bc1a687fc7 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml @@ -47,7 +47,7 @@ examples: - | #include <dt-bindings/interrupt-controller/irq.h> htintc: interrupt-controller@1fb000080 { - compatible = "loongson,htintc-1.0"; + compatible = "loongson,htpic-1.0"; reg = <0xfb000080 0x40>; interrupt-controller; #interrupt-cells = <1>; diff --git a/Documentation/devicetree/bindings/leds/leds-lgm.yaml b/Documentation/devicetree/bindings/leds/leds-lgm.yaml index 32bbf146c01d..f8d7963c3a13 100644 --- a/Documentation/devicetree/bindings/leds/leds-lgm.yaml +++ b/Documentation/devicetree/bindings/leds/leds-lgm.yaml @@ -14,6 +14,17 @@ properties: compatible: const: intel,lgm-ssoled + reg: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: sso + - const: fpid + gpio-controller: true '#gpio-cells': @@ -36,8 +47,15 @@ properties: additionalProperties: false + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + patternProperties: - "^led@[0-23]$": + "^led@[0-2]$": type: object properties: @@ -81,7 +99,7 @@ examples: #include <dt-bindings/leds/common.h> ssogpio: ssogpio@e0d40000 { - compatible = "intel,sso-led"; + compatible = "intel,lgm-ssoled"; reg = <0xE0D40000 0x2E4>; gpio-controller; #gpio-cells = <2>; @@ -103,8 +121,8 @@ examples: led-gpio = <&ssogpio 0 0>; }; - led@23 { - reg = <23>; + led@2 { + reg = <2>; function = LED_FUNCTION_POWER; color = <LED_COLOR_ID_GREEN>; led-gpio = <&ssogpio 23 0>; diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml index bbbd85501ada..d0040255c591 100644 --- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml @@ -218,7 +218,7 @@ examples: }; serdes@5000000 { - compatible = "cdns,ti,sierra-phy-t0"; + compatible = "ti,sierra-phy-t0"; reg-names = "serdes"; reg = <0x5000000 0x10000>; #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml index 5fcdf5801536..c73abb2ff513 100644 --- a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml +++ b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml @@ -61,7 +61,7 @@ examples: #size-cells = <0>; cw2015@62 { - compatible = "cellwise,cw201x"; + compatible = "cellwise,cw2015"; reg = <0x62>; cellwise,battery-profile = /bits/ 8 < 0x17 0x67 0x80 0x73 0x6E 0x6C 0x6B 0x63 diff --git a/Documentation/devicetree/bindings/power/supply/power-supply.yaml b/Documentation/devicetree/bindings/power/supply/power-supply.yaml index c5c55f627251..259760167759 100644 --- a/Documentation/devicetree/bindings/power/supply/power-supply.yaml +++ b/Documentation/devicetree/bindings/power/supply/power-supply.yaml @@ -18,25 +18,3 @@ properties: additionalProperties: true -examples: - - | - power { - #address-cells = <1>; - #size-cells = <0>; - - usb_charger:charger@e { - compatible = "some,usb-charger"; - reg = <0xe>; - }; - - ac_charger:charger@c { - compatible = "some,ac-charger"; - reg = <0xc>; - }; - - battery:battery@b { - compatible = "some,battery"; - reg = <0xb>; - power-supplies = <&usb_charger>, <&ac_charger>; - }; - }; diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml index 65e75d040521..eea300405816 100644 --- a/Documentation/devicetree/bindings/serial/serial.yaml +++ b/Documentation/devicetree/bindings/serial/serial.yaml @@ -134,7 +134,7 @@ examples: interrupts = <1>; bluetooth { - compatible = "brcm,bcm43341-bt"; + compatible = "brcm,bcm4330-bt"; interrupt-parent = <&gpio>; interrupts = <10>; }; diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml index 667dedefd69f..e3fb553d9180 100644 --- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml +++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml @@ -90,8 +90,8 @@ examples: #address-cells = <1>; #size-cells = <0>; - ethernet-switch@0 { - compatible = "micrel,ks8995m"; + display@0 { + compatible = "lg,lg4573"; spi-max-frequency = <1000000>; reg = <0>; }; diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index 06786f1b43d2..0477396e4945 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -181,22 +181,23 @@ additionalProperties: true examples: - | - spi@f00 { + spi@80010000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; - reg = <0xf00 0x20>; - interrupts = <2 13 0 2 14 0>; - interrupt-parent = <&mpc5200_pic>; - - ethernet-switch@0 { - compatible = "micrel,ks8995m"; + compatible = "fsl,imx28-spi"; + reg = <0x80010000 0x2000>; + interrupts = <96>; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; + + display@0 { + compatible = "lg,lg4573"; spi-max-frequency = <1000000>; reg = <0>; }; - codec@1 { - compatible = "ti,tlv320aic26"; + sensor@1 { + compatible = "bosch,bme680"; spi-max-frequency = <100000>; reg = <1>; }; diff --git a/Documentation/devicetree/bindings/spi/spi-mux.yaml b/Documentation/devicetree/bindings/spi/spi-mux.yaml index 6c21a132b51f..d09c6355e22d 100644 --- a/Documentation/devicetree/bindings/spi/spi-mux.yaml +++ b/Documentation/devicetree/bindings/spi/spi-mux.yaml @@ -75,16 +75,12 @@ examples: spi-flash@0 { compatible = "jedec,spi-nor"; reg = <0>; - #address-cells = <1>; - #size-cells = <0>; spi-max-frequency = <40000000>; }; - spi-device@1 { - compatible = "lineartechnology,ltc2488"; + sensor@1 { + compatible = "bosch,bme680"; reg = <1>; - #address-cells = <1>; - #size-cells = <0>; spi-max-frequency = <10000000>; }; }; diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml index d11806b1ede3..2d9af4c506bb 100644 --- a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml +++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml @@ -96,12 +96,6 @@ examples: dma-names = "rx", "tx"; cs-gpios = <&gpioa 11 0>; - aardvark@0 { - compatible = "totalphase,aardvark"; - reg = <0>; - spi-max-frequency = <4000000>; - st,spi-midi-ns = <4000>; - }; }; ...
Adding checks for undocumented compatible strings reveals a bunch of warnings in the DT binding examples. Fix the cases which are typos, just a mismatch between the schema and the example, or aren't documented at all. In a couple of cases, fixing the compatible revealed some schema errors which are fixed. There's a bunch of others remaining after this which have bindings, but those aren't converted to schema yet. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Vinod Koul <vkoul@kernel.org> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-clk@vger.kernel.org Cc: dmaengine@vger.kernel.org Cc: linux-i3c@lists.infradead.org Cc: linux-iio@vger.kernel.org Cc: linux-leds@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: linux-spi@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> --- .../clock/allwinner,sun4i-a10-pll1-clk.yaml | 2 +- .../bindings/clock/milbeaut-clock.yaml | 12 +++++---- .../bindings/display/brcm,bcm2835-dsi0.yaml | 6 ----- .../bindings/display/panel/panel-dpi.yaml | 2 +- .../devicetree/bindings/dma/qcom,gpi.yaml | 2 +- .../devicetree/bindings/i3c/i3c.yaml | 7 ++--- .../iio/adc/brcm,iproc-static-adc.yaml | 5 ---- .../iio/gyroscope/nxp,fxas21002c.yaml | 2 +- .../bindings/iio/light/upisemi,us5182.yaml | 4 +-- .../interrupt-controller/loongson,htpic.yaml | 2 +- .../devicetree/bindings/leds/leds-lgm.yaml | 26 ++++++++++++++++--- .../bindings/phy/ti,phy-j721e-wiz.yaml | 2 +- .../bindings/power/supply/cw2015_battery.yaml | 2 +- .../bindings/power/supply/power-supply.yaml | 22 ---------------- .../devicetree/bindings/serial/serial.yaml | 2 +- .../bindings/spi/amlogic,meson-gx-spicc.yaml | 4 +-- .../bindings/spi/spi-controller.yaml | 21 ++++++++------- .../devicetree/bindings/spi/spi-mux.yaml | 8 ++---- .../devicetree/bindings/spi/st,stm32-spi.yaml | 6 ----- 19 files changed, 58 insertions(+), 79 deletions(-)