| Message ID | 20210426175559.3110575-1-narmstrong@baylibre.com |
|---|---|
| State | New |
| Headers | show |
| Series | [1/2] mmc: meson-gx: make replace WARN_ONCE with dev_warn_once about scatterlist offset alignment | expand |
Hi Neil, On Mon, Apr 26, 2021 at 7:58 PM Neil Armstrong <narmstrong@baylibre.com> wrote: > > Some drivers like ath10k can sometimg give an sg buffer with an offset whose alignment sometimg -> sometimes > is not compatible with the Amlogic DMA descriptor engine requirements. > > Simply replace with dev_warn_once() to inform user this should be fixed to avoid > degraded performance. > > This should be ultimately fixed in ath10k, but since it's only a performance issue > the warning should be removed. > > Fixes: 79ed05e329c3 ("mmc: meson-gx: add support for descriptor chain mode") > Reported-by: Christian Hewitt <christianshewitt@gmail.com> > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
On Mon, 26 Apr 2021 at 19:56, Neil Armstrong <narmstrong@baylibre.com> wrote: > > Some drivers like ath10k can sometimg give an sg buffer with an offset whose alignment > is not compatible with the Amlogic DMA descriptor engine requirements. > > Simply replace with dev_warn_once() to inform user this should be fixed to avoid > degraded performance. > > This should be ultimately fixed in ath10k, but since it's only a performance issue > the warning should be removed. > > Fixes: 79ed05e329c3 ("mmc: meson-gx: add support for descriptor chain mode") > Reported-by: Christian Hewitt <christianshewitt@gmail.com> > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Applied for fixes and by adding a stable tag, thanks! Kind regards Uffe > --- > drivers/mmc/host/meson-gx-mmc.c | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c > index b8b771b643cc..1c61f0f24c09 100644 > --- a/drivers/mmc/host/meson-gx-mmc.c > +++ b/drivers/mmc/host/meson-gx-mmc.c > @@ -258,7 +258,9 @@ static void meson_mmc_get_transfer_mode(struct mmc_host *mmc, > for_each_sg(data->sg, sg, data->sg_len, i) { > /* check for 8 byte alignment */ > if (sg->offset % 8) { > - WARN_ONCE(1, "unaligned scatterlist buffer\n"); > + dev_warn_once(mmc_dev(mmc), > + "unaligned sg offset %u, disabling descriptor DMA for transfer\n", > + sg->offset); > return; > } > } > -- > 2.25.1 >
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c index b8b771b643cc..1c61f0f24c09 100644 --- a/drivers/mmc/host/meson-gx-mmc.c +++ b/drivers/mmc/host/meson-gx-mmc.c @@ -258,7 +258,9 @@ static void meson_mmc_get_transfer_mode(struct mmc_host *mmc, for_each_sg(data->sg, sg, data->sg_len, i) { /* check for 8 byte alignment */ if (sg->offset % 8) { - WARN_ONCE(1, "unaligned scatterlist buffer\n"); + dev_warn_once(mmc_dev(mmc), + "unaligned sg offset %u, disabling descriptor DMA for transfer\n", + sg->offset); return; } }
Some drivers like ath10k can sometimg give an sg buffer with an offset whose alignment is not compatible with the Amlogic DMA descriptor engine requirements. Simply replace with dev_warn_once() to inform user this should be fixed to avoid degraded performance. This should be ultimately fixed in ath10k, but since it's only a performance issue the warning should be removed. Fixes: 79ed05e329c3 ("mmc: meson-gx: add support for descriptor chain mode") Reported-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- drivers/mmc/host/meson-gx-mmc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)