| Message ID | 20210312003318.3273536-6-bjorn.andersson@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | qcom: wcnss: Allow overriding firmware form DT | expand |
On 12/03/2021 00:33, Bjorn Andersson wrote:
> firmware-name = "qcom/msm8916/WCNSS_qcom_wlan_nv.bin";
On the Linaro debian build I have to do this
+ firmware-name = "wlan/prima/WCNSS_qcom_wlan_nv.bin";
---
bod
On 12/03/2021 00:33, Bjorn Andersson wrote: > Enable the modem and WiFi subsystems and specify msm8916 specific > firmware path for these and the WCNSS control service. > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > --- > arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 12 ++++++++++++ > arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +- > 2 files changed, 13 insertions(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi > index 6aef0c2e4f0a..448e3561ef63 100644 > --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi > +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi > @@ -305,6 +305,12 @@ &mdss { > status = "okay"; > }; > > +&mpss { > + status = "okay"; > + > + firmware-name = "qcom/msm8916/mba.mbn", "qcom/msm8916/modem.mbn"; > +}; > + > &pm8916_resin { > status = "okay"; > linux,code = <KEY_VOLUMEDOWN>; > @@ -312,6 +318,8 @@ &pm8916_resin { > > &pronto { > status = "okay"; > + > + firmware-name = "qcom/msm8916/wcnss.mbn"; > }; On Debian I have to do this index 2a6a23cb14ca..597cdc8f51cc 100644 --- a/drivers/remoteproc/qcom_wcnss.c +++ b/drivers/remoteproc/qcom_wcnss.c @@ -33,7 +33,7 @@ #include "qcom_wcnss.h" #define WCNSS_CRASH_REASON_SMEM 422 -#define WCNSS_FIRMWARE_NAME "wcnss.mdt" +#define WCNSS_FIRMWARE_NAME "qcom/msm8916/wcnss.mdt" so I guess wcnss_probe() -> rproc_alloc() wants this fix too. --- bod
On Mon 15 Mar 07:01 CDT 2021, Bryan O'Donoghue wrote: > On 12/03/2021 00:33, Bjorn Andersson wrote: > > Enable the modem and WiFi subsystems and specify msm8916 specific > > firmware path for these and the WCNSS control service. > > > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > > --- > > arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 12 ++++++++++++ > > arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +- > > 2 files changed, 13 insertions(+), 1 deletion(-) > > > > diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi > > index 6aef0c2e4f0a..448e3561ef63 100644 > > --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi > > +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi > > @@ -305,6 +305,12 @@ &mdss { > > status = "okay"; > > }; > > +&mpss { > > + status = "okay"; > > + > > + firmware-name = "qcom/msm8916/mba.mbn", "qcom/msm8916/modem.mbn"; > > +}; > > + > > &pm8916_resin { > > status = "okay"; > > linux,code = <KEY_VOLUMEDOWN>; > > @@ -312,6 +318,8 @@ &pm8916_resin { > > &pronto { > > status = "okay"; > > + > > + firmware-name = "qcom/msm8916/wcnss.mbn"; > > }; > > On Debian I have to do this > > > index 2a6a23cb14ca..597cdc8f51cc 100644 > --- a/drivers/remoteproc/qcom_wcnss.c > +++ b/drivers/remoteproc/qcom_wcnss.c > @@ -33,7 +33,7 @@ > #include "qcom_wcnss.h" > > #define WCNSS_CRASH_REASON_SMEM 422 > -#define WCNSS_FIRMWARE_NAME "wcnss.mdt" > +#define WCNSS_FIRMWARE_NAME "qcom/msm8916/wcnss.mdt" > > so I guess wcnss_probe() -> rproc_alloc() wants this fix too. > Can you confirm that you're saying that you want below patch, which I just merged? https://lore.kernel.org/linux-remoteproc/20210312002441.3273183-1-bjorn.andersson@linaro.org/ (Which makes it possible to specify firmware name per platform/board) Regards, Bjorn _______________________________________________ wcn36xx mailing list wcn36xx@lists.infradead.org http://lists.infradead.org/mailman/listinfo/wcn36xx
On 18/03/2021 14:50, Bjorn Andersson wrote: > On Mon 15 Mar 07:01 CDT 2021, Bryan O'Donoghue wrote: > >> On 12/03/2021 00:33, Bjorn Andersson wrote: >>> Enable the modem and WiFi subsystems and specify msm8916 specific >>> firmware path for these and the WCNSS control service. >>> >>> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> >>> --- >>> arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 12 ++++++++++++ >>> arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +- >>> 2 files changed, 13 insertions(+), 1 deletion(-) >>> >>> diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi >>> index 6aef0c2e4f0a..448e3561ef63 100644 >>> --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi >>> +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi >>> @@ -305,6 +305,12 @@ &mdss { >>> status = "okay"; >>> }; >>> +&mpss { >>> + status = "okay"; >>> + >>> + firmware-name = "qcom/msm8916/mba.mbn", "qcom/msm8916/modem.mbn"; >>> +}; >>> + >>> &pm8916_resin { >>> status = "okay"; >>> linux,code = <KEY_VOLUMEDOWN>; >>> @@ -312,6 +318,8 @@ &pm8916_resin { >>> &pronto { >>> status = "okay"; >>> + >>> + firmware-name = "qcom/msm8916/wcnss.mbn"; >>> }; >> >> On Debian I have to do this >> >> >> index 2a6a23cb14ca..597cdc8f51cc 100644 >> --- a/drivers/remoteproc/qcom_wcnss.c >> +++ b/drivers/remoteproc/qcom_wcnss.c >> @@ -33,7 +33,7 @@ >> #include "qcom_wcnss.h" >> >> #define WCNSS_CRASH_REASON_SMEM 422 >> -#define WCNSS_FIRMWARE_NAME "wcnss.mdt" >> +#define WCNSS_FIRMWARE_NAME "qcom/msm8916/wcnss.mdt" >> >> so I guess wcnss_probe() -> rproc_alloc() wants this fix too. >> > > Can you confirm that you're saying that you want below patch, which I > just merged? > > https://lore.kernel.org/linux-remoteproc/20210312002441.3273183-1-bjorn.andersson@linaro.org/ > > (Which makes it possible to specify firmware name per platform/board) > > Regards, > Bjorn > yep Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> _______________________________________________ wcn36xx mailing list wcn36xx@lists.infradead.org http://lists.infradead.org/mailman/listinfo/wcn36xx
Hi Bjorn, On Thu, Mar 11, 2021 at 04:33:18PM -0800, Bjorn Andersson wrote: > Enable the modem and WiFi subsystems and specify msm8916 specific > firmware path for these and the WCNSS control service. > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> The changes itself look good to me, but the commit message is really misleading. It does not mention anywhere that the change actually just enables "modem" on apq8016-sbc instead of "msm8916". :) Also, WCNSS was actually enabled before already (with the default firmware path). In my opinion, it would be clearer to change the firmware-name for it in an extra patch. > --- > arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 12 ++++++++++++ > arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +- > 2 files changed, 13 insertions(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi > index 6aef0c2e4f0a..448e3561ef63 100644 > --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi > +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi > @@ -305,6 +305,12 @@ &mdss { > status = "okay"; > }; > > +&mpss { > + status = "okay"; > + > + firmware-name = "qcom/msm8916/mba.mbn", "qcom/msm8916/modem.mbn"; > +}; > + > &pm8916_resin { > status = "okay"; > linux,code = <KEY_VOLUMEDOWN>; > @@ -312,6 +318,8 @@ &pm8916_resin { > > &pronto { > status = "okay"; > + > + firmware-name = "qcom/msm8916/wcnss.mbn"; > }; > How do I get a .mbn from the wcnss.{mdt,.b??} files provided in the DB410c firmware package? I guess I should just run them through https://github.com/andersson/pil-squasher? Also, is the single file format (mbn) preferred now? Not sure if there is any significant difference except having less files laying around. Thanks, Stephan _______________________________________________ wcn36xx mailing list wcn36xx@lists.infradead.org http://lists.infradead.org/mailman/listinfo/wcn36xx
On 3/19/21 9:19 AM, Stephan Gerhold wrote: > Hi Bjorn, > > On Thu, Mar 11, 2021 at 04:33:18PM -0800, Bjorn Andersson wrote: >> Enable the modem and WiFi subsystems and specify msm8916 specific >> firmware path for these and the WCNSS control service. >> >> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > > The changes itself look good to me, but the commit message is really > misleading. It does not mention anywhere that the change actually just > enables "modem" on apq8016-sbc instead of "msm8916". :) > > Also, WCNSS was actually enabled before already (with the default > firmware path). In my opinion, it would be clearer to change the > firmware-name for it in an extra patch. > >> --- >> arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 12 ++++++++++++ >> arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +- >> 2 files changed, 13 insertions(+), 1 deletion(-) >> >> diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi >> index 6aef0c2e4f0a..448e3561ef63 100644 >> --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi >> +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi >> @@ -305,6 +305,12 @@ &mdss { >> status = "okay"; >> }; >> >> +&mpss { >> + status = "okay"; >> + >> + firmware-name = "qcom/msm8916/mba.mbn", "qcom/msm8916/modem.mbn"; >> +}; >> + >> &pm8916_resin { >> status = "okay"; >> linux,code = <KEY_VOLUMEDOWN>; >> @@ -312,6 +318,8 @@ &pm8916_resin { >> >> &pronto { >> status = "okay"; >> + >> + firmware-name = "qcom/msm8916/wcnss.mbn"; >> }; >> > > How do I get a .mbn from the wcnss.{mdt,.b??} files provided in the > DB410c firmware package? I guess I should just run them through > https://github.com/andersson/pil-squasher? > > Also, is the single file format (mbn) preferred now? Not sure if there > is any significant difference except having less files laying around. Same issue here, where can I get mbn file?, After change the file to use wcnss.mdt this patch works. Regards, Anibal > > Thanks, > Stephan > >
On Fri 19 Mar 10:19 CDT 2021, Stephan Gerhold wrote: > Hi Bjorn, > Hi Stephan, I thought I wrote you a reply, but I don't see it on lore or in my mailbox... > On Thu, Mar 11, 2021 at 04:33:18PM -0800, Bjorn Andersson wrote: > > Enable the modem and WiFi subsystems and specify msm8916 specific > > firmware path for these and the WCNSS control service. > > > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > > The changes itself look good to me, but the commit message is really > misleading. It does not mention anywhere that the change actually just > enables "modem" on apq8016-sbc instead of "msm8916". :) > > Also, WCNSS was actually enabled before already (with the default > firmware path). In my opinion, it would be clearer to change the > firmware-name for it in an extra patch. > You're right, I will rewrite the commit message. > > --- > > arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 12 ++++++++++++ > > arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +- > > 2 files changed, 13 insertions(+), 1 deletion(-) > > > > diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi > > index 6aef0c2e4f0a..448e3561ef63 100644 > > --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi > > +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi > > @@ -305,6 +305,12 @@ &mdss { > > status = "okay"; > > }; > > > > +&mpss { > > + status = "okay"; > > + > > + firmware-name = "qcom/msm8916/mba.mbn", "qcom/msm8916/modem.mbn"; > > +}; > > + > > &pm8916_resin { > > status = "okay"; > > linux,code = <KEY_VOLUMEDOWN>; > > @@ -312,6 +318,8 @@ &pm8916_resin { > > > > &pronto { > > status = "okay"; > > + > > + firmware-name = "qcom/msm8916/wcnss.mbn"; > > }; > > > > How do I get a .mbn from the wcnss.{mdt,.b??} files provided in the > DB410c firmware package? I guess I should just run them through > https://github.com/andersson/pil-squasher? > Yes, .mdt + .bNN files can be put back together as a .mbn by running them through the pil-squasher. It's worth mentioning that the suffix doesn't matter for the loader, so symlinking the .mdt to .mbn (in either way) will keep the kernel happy - if that simplifies transitions in either way. > Also, is the single file format (mbn) preferred now? Not sure if there > is any significant difference except having less files laying around. > We've had numerous cases where people has managed to mix the parts from different versions of the firmware, sometimes with the nice result of the loader complaining that some particular .bNN file is missing other times just with the signature check (mysteriously) failing. Lumping the parts into a single .mbn resolves all these issues and hence I prefer this. It is however not a requirement. Regards, Bjorn _______________________________________________ wcn36xx mailing list wcn36xx@lists.infradead.org http://lists.infradead.org/mailman/listinfo/wcn36xx
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 6aef0c2e4f0a..448e3561ef63 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -305,6 +305,12 @@ &mdss { status = "okay"; }; +&mpss { + status = "okay"; + + firmware-name = "qcom/msm8916/mba.mbn", "qcom/msm8916/modem.mbn"; +}; + &pm8916_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; @@ -312,6 +318,8 @@ &pm8916_resin { &pronto { status = "okay"; + + firmware-name = "qcom/msm8916/wcnss.mbn"; }; &sdhc_1 { @@ -394,6 +402,10 @@ &wcd_codec { qcom,mbhc-vthreshold-high = <75 150 237 450 500>; }; +&wcnss_ctrl { + firmware-name = "qcom/msm8916/WCNSS_qcom_wlan_nv.bin"; +}; + /* Enable CoreSight */ &cti0 { status = "okay"; }; &cti1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 5353da521974..1118836c15dd 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -1738,7 +1738,7 @@ smd-edge { label = "pronto"; - wcnss { + wcnss_ctrl: wcnss { compatible = "qcom,wcnss"; qcom,smd-channels = "WCNSS_CTRL";
Enable the modem and WiFi subsystems and specify msm8916 specific firmware path for these and the WCNSS control service. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 12 ++++++++++++ arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +- 2 files changed, 13 insertions(+), 1 deletion(-)