diff mbox series

[v1,1/2] dt-bindings: pinctrl: qcom: Add SM6115 pinctrl bindings

Message ID 20210622201054.532979-2-iskren.chernev@gmail.com
State Superseded
Headers show
Series Add Pinctrl for SM4250 and SM6115 | expand

Commit Message

Iskren Chernev June 22, 2021, 8:10 p.m. UTC 
Add device tree binding Documentation details for Qualcomm SM6115 and
SM4250 pinctrl.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
---
 .../bindings/pinctrl/qcom,sm6115-pinctrl.yaml | 172 ++++++++++++++++++
 1 file changed, 172 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml

Comments

Rob Herring (Arm) June 24, 2021, 6:34 p.m. UTC | #1 
On Tue, Jun 22, 2021 at 11:10:53PM +0300, Iskren Chernev wrote:
> Add device tree binding Documentation details for Qualcomm SM6115 and

> SM4250 pinctrl.

> 

> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>

> ---

>  .../bindings/pinctrl/qcom,sm6115-pinctrl.yaml | 172 ++++++++++++++++++

>  1 file changed, 172 insertions(+)

>  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml

> 

> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml

> new file mode 100644

> index 000000000000..461edb7c5a1d

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml

> @@ -0,0 +1,172 @@

> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)

> +%YAML 1.2

> +---

> +$id: http://devicetree.org/schemas/pinctrl/qcom,sm6115-pinctrl.yaml#

> +$schema: http://devicetree.org/meta-schemas/core.yaml#

> +

> +title: Qualcomm Technologies, Inc. SM6115, SM4250 TLMM block

> +

> +maintainers:

> +  - Iskren Chernev <iskren.chernev@gmail.com>

> +

> +description: |

> +  This binding describes the Top Level Mode Multiplexer block found in the

> +  SM6115 and SM4250 platforms.

> +

> +properties:

> +  compatible:

> +    enum:

> +      - qcom,sm4250-tlmm

> +      - qcom,sm6115-tlmm

> +

> +  reg:

> +    minItems: 3

> +    maxItems: 3

> +

> +  reg-names:

> +    items:

> +      - const: "west"

> +      - const: "south"

> +      - const: "east"


Don't need quotes.

> +

> +  interrupts:

> +    description: Specifies the TLMM summary IRQ

> +    maxItems: 1

> +

> +  interrupt-controller: true

> +

> +  '#interrupt-cells':

> +    description:

> +      Specifies the PIN numbers and Flags, as defined in defined in

> +      include/dt-bindings/interrupt-controller/irq.h

> +    const: 2

> +

> +  gpio-controller: true

> +

> +  '#gpio-cells':

> +    description: Specifying the pin number and flags, as defined in

> +      include/dt-bindings/gpio/gpio.h

> +    const: 2

> +

> +  gpio-ranges:

> +    maxItems: 1

> +

> +  wakeup-parent:

> +    maxItems: 1

> +

> +#PIN CONFIGURATION NODES

> +patternProperties:

> +  '^.*$':

> +    if:

> +      type: object

> +    then:


Please don't do this hack for new bindings. Use a pattern for node names 
you can match on. '-pins$' is common.

> +      properties:

> +        pins:

> +          description:

> +            List of gpio pins affected by the properties specified in this

> +            subnode.

> +          items:

> +            oneOf:

> +              - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$"

> +              - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data,

> +                        sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]

> +          minItems: 1

> +          maxItems: 36

> +

> +        function:

> +          description:

> +            Specify the alternative function to be configured for the specified

> +            pins.

> +

> +          enum: [ qup0, gpio, ddr_bist, phase_flag0, qdss_gpio8, atest_tsens,

> +                  mpm_pwr, m_voc, phase_flag1, qdss_gpio9, atest_tsens2,

> +                  phase_flag2, qdss_gpio10, dac_calib0, atest_usb10,

> +                  phase_flag3, qdss_gpio11, dac_calib1, atest_usb11, qup1,

> +                  cri_trng0, phase_flag4, dac_calib2, atest_usb12, cri_trng1,

> +                  phase_flag5, dac_calib3, atest_usb13, qup2, phase_flag6,

> +                  dac_calib4, atest_usb1, qup3, pbs_out, pll_bist, qdss_gpio,

> +                  tsense_pwm, agera_pll, pbs0, qdss_gpio0, pbs1, qdss_gpio1,

> +                  qup4, tgu_ch0, tgu_ch1, qup5, tgu_ch2, phase_flag7,

> +                  qdss_gpio4, dac_calib5, tgu_ch3, phase_flag8, qdss_gpio5,

> +                  dac_calib6, phase_flag9, qdss_gpio6, dac_calib7,

> +                  phase_flag10, qdss_gpio7, dac_calib8, sdc2_tb, cri_trng,

> +                  pbs2, qdss_gpio2, sdc1_tb, pbs3, qdss_gpio3, cam_mclk, pbs4,

> +                  adsp_ext, pbs5, cci_i2c, prng_rosc, pbs6, phase_flag11,

> +                  dac_calib9, atest_usb20, pbs7, phase_flag12, dac_calib10,

> +                  atest_usb21, cci_timer1, gcc_gp1, pbs8, phase_flag13,

> +                  dac_calib11, atest_usb22, cci_async, cci_timer0, pbs9,

> +                  phase_flag14, dac_calib12, atest_usb23, pbs10, phase_flag15,

> +                  dac_calib13, atest_usb2, vsense_trigger, qdss_cti,

> +                  cci_timer2, phase_flag16, dac_calib14, atest_char,

> +                  phase_flag17, dac_calib15, atest_char0, gp_pdm0,

> +                  phase_flag18, dac_calib16, atest_char1, cci_timer3, gp_pdm1,

> +                  phase_flag19, dac_calib17, atest_char2, gp_pdm2,

> +                  phase_flag20, dac_calib18, atest_char3, phase_flag21,

> +                  phase_flag22, nav_gpio, phase_flag23, phase_flag24,

> +                  phase_flag25, pbs14, qdss_gpio14, vfr_1, pbs15, qdss_gpio15,

> +                  pa_indicator, gsm1_tx, ssbi_wtr1, pll_bypassnl, pll_reset,

> +                  phase_flag26, ddr_pxi0, gsm0_tx, phase_flag27, gcc_gp2,

> +                  qdss_gpio12, ddr_pxi1, gcc_gp3, qdss_gpio13, dbg_out,

> +                  uim2_data, uim2_clk, uim2_reset, uim2_present, uim1_data,

> +                  uim1_clk, uim1_reset, uim1_present, dac_calib19, mdp_vsync,

> +                  mdp_vsync_out_0, mdp_vsync_out_1, dac_calib20, dac_calib21,

> +                  atest_bbrx1, pbs11, usb_phy, atest_bbrx0, mss_lte, pbs12,

> +                  pbs13, wlan1_adc0, wlan1_adc1, sd_write, jitter_bist,

> +                  atest_gpsadc_dtest0_native, atest_gpsadc_dtest1_native,

> +                  phase_flag28, dac_calib22, ddr_pxi2, phase_flag29,

> +                  dac_calib23, phase_flag30, dac_calib24, ddr_pxi3,

> +                  phase_flag31, dac_calib25 ]

> +

> +        drive-strength:

> +          enum: [2, 4, 6, 8, 10, 12, 14, 16]

> +          default: 2

> +          description:

> +            Selects the drive strength for the specified pins, in mA.

> +

> +        bias-pull-down: true

> +

> +        bias-pull-up: true

> +

> +        bias-disable: true

> +

> +        output-high: true

> +

> +        output-low: true

> +

> +      required:

> +        - pins

> +        - function

> +

> +      additionalProperties: false

> +

> +required:

> +  - compatible

> +  - reg

> +  - reg-names

> +  - interrupts

> +  - interrupt-controller

> +  - '#interrupt-cells'

> +  - gpio-controller

> +  - '#gpio-cells'

> +  - gpio-ranges

> +

> +additionalProperties: false

> +

> +examples:

> +  - |

> +        #include <dt-bindings/interrupt-controller/arm-gic.h>

> +        pinctrl@500000 {

> +                compatible = "qcom,sm4250-tlmm";

> +                reg = <0x500000 0x400000>,

> +                        <0x900000 0x400000>,

> +                        <0xd00000 0x400000>;

> +                reg-names = "west", "south", "east";

> +                interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;

> +                gpio-controller;

> +                #gpio-cells = <2>;

> +                interrupt-controller;

> +                #interrupt-cells = <2>;

> +                gpio-ranges = <&tlmm 0 0 121>;

> +                wakeup-parent = <&intc>;

> +        }

> +

> -- 

> 2.31.1

> 

>
Bjorn Andersson June 24, 2021, 7:01 p.m. UTC | #2 
On Tue 22 Jun 15:10 CDT 2021, Iskren Chernev wrote:

> Add device tree binding Documentation details for Qualcomm SM6115 and
> SM4250 pinctrl.
> 
> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
> ---
>  .../bindings/pinctrl/qcom,sm6115-pinctrl.yaml | 172 ++++++++++++++++++
>  1 file changed, 172 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
> new file mode 100644
> index 000000000000..461edb7c5a1d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
> @@ -0,0 +1,172 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/qcom,sm6115-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies, Inc. SM6115, SM4250 TLMM block
> +
> +maintainers:
> +  - Iskren Chernev <iskren.chernev@gmail.com>
> +
> +description: |

The '|' denotes that you want to keep the formatting, but there's no
need for that in your description.

> +  This binding describes the Top Level Mode Multiplexer block found in the
> +  SM6115 and SM4250 platforms.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,sm4250-tlmm
> +      - qcom,sm6115-tlmm
> +
> +  reg:
> +    minItems: 3
> +    maxItems: 3
> +
> +  reg-names:
> +    items:
> +      - const: "west"
> +      - const: "south"
> +      - const: "east"
> +
> +  interrupts:
> +    description: Specifies the TLMM summary IRQ
> +    maxItems: 1
> +
> +  interrupt-controller: true
> +
> +  '#interrupt-cells':
> +    description:
> +      Specifies the PIN numbers and Flags, as defined in defined in
> +      include/dt-bindings/interrupt-controller/irq.h
> +    const: 2
> +
> +  gpio-controller: true
> +
> +  '#gpio-cells':
> +    description: Specifying the pin number and flags, as defined in
> +      include/dt-bindings/gpio/gpio.h
> +    const: 2
> +
> +  gpio-ranges:
> +    maxItems: 1
> +
> +  wakeup-parent:
> +    maxItems: 1
> +
> +#PIN CONFIGURATION NODES
> +patternProperties:
> +  '^.*$':
> +    if:
> +      type: object
> +    then:

This doesn't cover the ability to define pinctrl state both in immediate
nodes and nested one level down. So please mimic how this is done in

Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-pinctrl.yaml

> +      properties:
> +        pins:
> +          description:
> +            List of gpio pins affected by the properties specified in this
> +            subnode.
> +          items:
> +            oneOf:
> +              - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$"

This says that gpio0-9, gpio10-99 and gpio100-179 are valid, but the
driver only presents gpio0-112, so this should be:

^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-2]$

> +              - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data,
> +                        sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
> +          minItems: 1
> +          maxItems: 36
> +
> +        function:
> +          description:
> +            Specify the alternative function to be configured for the specified
> +            pins.
> +
> +          enum: [ qup0, gpio, ddr_bist, phase_flag0, qdss_gpio8, atest_tsens,
> +                  mpm_pwr, m_voc, phase_flag1, qdss_gpio9, atest_tsens2,
> +                  phase_flag2, qdss_gpio10, dac_calib0, atest_usb10,
> +                  phase_flag3, qdss_gpio11, dac_calib1, atest_usb11, qup1,
> +                  cri_trng0, phase_flag4, dac_calib2, atest_usb12, cri_trng1,
> +                  phase_flag5, dac_calib3, atest_usb13, qup2, phase_flag6,
> +                  dac_calib4, atest_usb1, qup3, pbs_out, pll_bist, qdss_gpio,
> +                  tsense_pwm, agera_pll, pbs0, qdss_gpio0, pbs1, qdss_gpio1,
> +                  qup4, tgu_ch0, tgu_ch1, qup5, tgu_ch2, phase_flag7,
> +                  qdss_gpio4, dac_calib5, tgu_ch3, phase_flag8, qdss_gpio5,
> +                  dac_calib6, phase_flag9, qdss_gpio6, dac_calib7,
> +                  phase_flag10, qdss_gpio7, dac_calib8, sdc2_tb, cri_trng,
> +                  pbs2, qdss_gpio2, sdc1_tb, pbs3, qdss_gpio3, cam_mclk, pbs4,
> +                  adsp_ext, pbs5, cci_i2c, prng_rosc, pbs6, phase_flag11,
> +                  dac_calib9, atest_usb20, pbs7, phase_flag12, dac_calib10,
> +                  atest_usb21, cci_timer1, gcc_gp1, pbs8, phase_flag13,
> +                  dac_calib11, atest_usb22, cci_async, cci_timer0, pbs9,
> +                  phase_flag14, dac_calib12, atest_usb23, pbs10, phase_flag15,
> +                  dac_calib13, atest_usb2, vsense_trigger, qdss_cti,
> +                  cci_timer2, phase_flag16, dac_calib14, atest_char,
> +                  phase_flag17, dac_calib15, atest_char0, gp_pdm0,
> +                  phase_flag18, dac_calib16, atest_char1, cci_timer3, gp_pdm1,
> +                  phase_flag19, dac_calib17, atest_char2, gp_pdm2,
> +                  phase_flag20, dac_calib18, atest_char3, phase_flag21,
> +                  phase_flag22, nav_gpio, phase_flag23, phase_flag24,
> +                  phase_flag25, pbs14, qdss_gpio14, vfr_1, pbs15, qdss_gpio15,
> +                  pa_indicator, gsm1_tx, ssbi_wtr1, pll_bypassnl, pll_reset,
> +                  phase_flag26, ddr_pxi0, gsm0_tx, phase_flag27, gcc_gp2,
> +                  qdss_gpio12, ddr_pxi1, gcc_gp3, qdss_gpio13, dbg_out,
> +                  uim2_data, uim2_clk, uim2_reset, uim2_present, uim1_data,
> +                  uim1_clk, uim1_reset, uim1_present, dac_calib19, mdp_vsync,
> +                  mdp_vsync_out_0, mdp_vsync_out_1, dac_calib20, dac_calib21,
> +                  atest_bbrx1, pbs11, usb_phy, atest_bbrx0, mss_lte, pbs12,
> +                  pbs13, wlan1_adc0, wlan1_adc1, sd_write, jitter_bist,
> +                  atest_gpsadc_dtest0_native, atest_gpsadc_dtest1_native,
> +                  phase_flag28, dac_calib22, ddr_pxi2, phase_flag29,
> +                  dac_calib23, phase_flag30, dac_calib24, ddr_pxi3,
> +                  phase_flag31, dac_calib25 ]
> +
> +        drive-strength:
> +          enum: [2, 4, 6, 8, 10, 12, 14, 16]
> +          default: 2
> +          description:
> +            Selects the drive strength for the specified pins, in mA.
> +
> +        bias-pull-down: true
> +
> +        bias-pull-up: true
> +
> +        bias-disable: true
> +
> +        output-high: true
> +
> +        output-low: true
> +
> +      required:
> +        - pins
> +        - function
> +
> +      additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - interrupts
> +  - interrupt-controller
> +  - '#interrupt-cells'
> +  - gpio-controller
> +  - '#gpio-cells'
> +  - gpio-ranges
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +        #include <dt-bindings/interrupt-controller/arm-gic.h>
> +        pinctrl@500000 {
> +                compatible = "qcom,sm4250-tlmm";
> +                reg = <0x500000 0x400000>,
> +                        <0x900000 0x400000>,
> +                        <0xd00000 0x400000>;
> +                reg-names = "west", "south", "east";
> +                interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
> +                gpio-controller;
> +                #gpio-cells = <2>;
> +                interrupt-controller;
> +                #interrupt-cells = <2>;
> +                gpio-ranges = <&tlmm 0 0 121>;

You only have 114 (113 GPIOs + UFS_RESET) gpios.

Doesn't the &tlmm need to be defined in the example as well?

> +                wakeup-parent = <&intc>;

The wakeup-parent should most likely be &pdc, but feel free to omit
"wakup-parent" from the example if that helps.

Regards,
Bjorn

> +        }
> +
> -- 
> 2.31.1
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
new file mode 100644
index 000000000000..461edb7c5a1d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
@@ -0,0 +1,172 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm6115-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM6115, SM4250 TLMM block
+
+maintainers:
+  - Iskren Chernev <iskren.chernev@gmail.com>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block found in the
+  SM6115 and SM4250 platforms.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm4250-tlmm
+      - qcom,sm6115-tlmm
+
+  reg:
+    minItems: 3
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: "west"
+      - const: "south"
+      - const: "east"
+
+  interrupts:
+    description: Specifies the TLMM summary IRQ
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description:
+      Specifies the PIN numbers and Flags, as defined in defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  wakeup-parent:
+    maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '^.*$':
+    if:
+      type: object
+    then:
+      properties:
+        pins:
+          description:
+            List of gpio pins affected by the properties specified in this
+            subnode.
+          items:
+            oneOf:
+              - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$"
+              - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data,
+                        sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+          minItems: 1
+          maxItems: 36
+
+        function:
+          description:
+            Specify the alternative function to be configured for the specified
+            pins.
+
+          enum: [ qup0, gpio, ddr_bist, phase_flag0, qdss_gpio8, atest_tsens,
+                  mpm_pwr, m_voc, phase_flag1, qdss_gpio9, atest_tsens2,
+                  phase_flag2, qdss_gpio10, dac_calib0, atest_usb10,
+                  phase_flag3, qdss_gpio11, dac_calib1, atest_usb11, qup1,
+                  cri_trng0, phase_flag4, dac_calib2, atest_usb12, cri_trng1,
+                  phase_flag5, dac_calib3, atest_usb13, qup2, phase_flag6,
+                  dac_calib4, atest_usb1, qup3, pbs_out, pll_bist, qdss_gpio,
+                  tsense_pwm, agera_pll, pbs0, qdss_gpio0, pbs1, qdss_gpio1,
+                  qup4, tgu_ch0, tgu_ch1, qup5, tgu_ch2, phase_flag7,
+                  qdss_gpio4, dac_calib5, tgu_ch3, phase_flag8, qdss_gpio5,
+                  dac_calib6, phase_flag9, qdss_gpio6, dac_calib7,
+                  phase_flag10, qdss_gpio7, dac_calib8, sdc2_tb, cri_trng,
+                  pbs2, qdss_gpio2, sdc1_tb, pbs3, qdss_gpio3, cam_mclk, pbs4,
+                  adsp_ext, pbs5, cci_i2c, prng_rosc, pbs6, phase_flag11,
+                  dac_calib9, atest_usb20, pbs7, phase_flag12, dac_calib10,
+                  atest_usb21, cci_timer1, gcc_gp1, pbs8, phase_flag13,
+                  dac_calib11, atest_usb22, cci_async, cci_timer0, pbs9,
+                  phase_flag14, dac_calib12, atest_usb23, pbs10, phase_flag15,
+                  dac_calib13, atest_usb2, vsense_trigger, qdss_cti,
+                  cci_timer2, phase_flag16, dac_calib14, atest_char,
+                  phase_flag17, dac_calib15, atest_char0, gp_pdm0,
+                  phase_flag18, dac_calib16, atest_char1, cci_timer3, gp_pdm1,
+                  phase_flag19, dac_calib17, atest_char2, gp_pdm2,
+                  phase_flag20, dac_calib18, atest_char3, phase_flag21,
+                  phase_flag22, nav_gpio, phase_flag23, phase_flag24,
+                  phase_flag25, pbs14, qdss_gpio14, vfr_1, pbs15, qdss_gpio15,
+                  pa_indicator, gsm1_tx, ssbi_wtr1, pll_bypassnl, pll_reset,
+                  phase_flag26, ddr_pxi0, gsm0_tx, phase_flag27, gcc_gp2,
+                  qdss_gpio12, ddr_pxi1, gcc_gp3, qdss_gpio13, dbg_out,
+                  uim2_data, uim2_clk, uim2_reset, uim2_present, uim1_data,
+                  uim1_clk, uim1_reset, uim1_present, dac_calib19, mdp_vsync,
+                  mdp_vsync_out_0, mdp_vsync_out_1, dac_calib20, dac_calib21,
+                  atest_bbrx1, pbs11, usb_phy, atest_bbrx0, mss_lte, pbs12,
+                  pbs13, wlan1_adc0, wlan1_adc1, sd_write, jitter_bist,
+                  atest_gpsadc_dtest0_native, atest_gpsadc_dtest1_native,
+                  phase_flag28, dac_calib22, ddr_pxi2, phase_flag29,
+                  dac_calib23, phase_flag30, dac_calib24, ddr_pxi3,
+                  phase_flag31, dac_calib25 ]
+
+        drive-strength:
+          enum: [2, 4, 6, 8, 10, 12, 14, 16]
+          default: 2
+          description:
+            Selects the drive strength for the specified pins, in mA.
+
+        bias-pull-down: true
+
+        bias-pull-up: true
+
+        bias-disable: true
+
+        output-high: true
+
+        output-low: true
+
+      required:
+        - pins
+        - function
+
+      additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        pinctrl@500000 {
+                compatible = "qcom,sm4250-tlmm";
+                reg = <0x500000 0x400000>,
+                        <0x900000 0x400000>,
+                        <0xd00000 0x400000>;
+                reg-names = "west", "south", "east";
+                interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+                gpio-controller;
+                #gpio-cells = <2>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+                gpio-ranges = <&tlmm 0 0 121>;
+                wakeup-parent = <&intc>;
+        }
+