| Message ID | 20210708120111.519444-2-nuno.sa@analog.com |
|---|---|
| State | Accepted |
| Commit | a3933625de28e730c7822d2b14f896125577abe8 |
| Headers | show |
| Series | AXI FAN new features and improvements | expand |
On Thu, Jul 08, 2021 at 02:01:06PM +0200, Nuno Sá wrote: > The core will only work if it's clock is enabled. This patch is a > minor enhancement to make sure that's the case. > > Signed-off-by: Nuno Sá <nuno.sa@analog.com> Can I apply this patch as well as patches 4/6 and 5/6 as-is, or do they depend on patches 2/6 and 3/6 ? Thanks, Guenter
> -----Original Message----- > From: Guenter Roeck <groeck7@gmail.com> On Behalf Of Guenter > Roeck > Sent: Saturday, July 17, 2021 7:25 PM > To: Sa, Nuno <Nuno.Sa@analog.com> > Cc: linux-hwmon@vger.kernel.org; devicetree@vger.kernel.org; Rob > Herring <robh+dt@kernel.org>; Jean Delvare <jdelvare@suse.com> > Subject: Re: [RFC PATCH 1/6] hwmon: axi-fan-control: make sure the > clock is enabled > > > On Thu, Jul 08, 2021 at 02:01:06PM +0200, Nuno Sá wrote: > > The core will only work if it's clock is enabled. This patch is a > > minor enhancement to make sure that's the case. > > > > Signed-off-by: Nuno Sá <nuno.sa@analog.com> > > Can I apply this patch as well as patches 4/6 and 5/6 as-is, or > do they depend on patches 2/6 and 3/6 ? > > Thanks, > Guenter I think patch 5/6 only makes sense with patch 2/6. If we do not set the tacho evaluation parameters, clearing the fan fault irq has no effect... - Nuno Sá
diff --git a/drivers/hwmon/axi-fan-control.c b/drivers/hwmon/axi-fan-control.c index e3f6b03e6764..901d1588234d 100644 --- a/drivers/hwmon/axi-fan-control.c +++ b/drivers/hwmon/axi-fan-control.c @@ -351,6 +351,11 @@ static int axi_fan_control_init(struct axi_fan_control_data *ctl, return ret; } +static void axi_fan_control_clk_disable(void *clk) +{ + clk_disable_unprepare(clk); +} + static const struct hwmon_channel_info *axi_fan_control_info[] = { HWMON_CHANNEL_INFO(pwm, HWMON_PWM_INPUT), HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT | HWMON_F_FAULT | HWMON_F_LABEL), @@ -406,6 +411,14 @@ static int axi_fan_control_probe(struct platform_device *pdev) return PTR_ERR(clk); } + ret = clk_prepare_enable(clk); + if (ret) + return ret; + + ret = devm_add_action_or_reset(&pdev->dev, axi_fan_control_clk_disable, clk); + if (ret) + return ret; + ctl->clk_rate = clk_get_rate(clk); if (!ctl->clk_rate) return -EINVAL;
The core will only work if it's clock is enabled. This patch is a minor enhancement to make sure that's the case. Signed-off-by: Nuno Sá <nuno.sa@analog.com> --- drivers/hwmon/axi-fan-control.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)