diff mbox series

[v3,1/3] dt-bindings: can-controller: add support for termination-gpios

Message ID 20210818071232.20585-2-o.rempel@pengutronix.de
State New
Headers show
Series can: provide GPIO based termination | expand

Commit Message

Oleksij Rempel Aug. 18, 2021, 7:12 a.m. UTC 
Some boards provide GPIO controllable termination resistor. Provide
binding to make use of it.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 .../devicetree/bindings/net/can/can-controller.yaml      | 9 +++++++++
 1 file changed, 9 insertions(+)

Comments

Rob Herring Aug. 18, 2021, 5:01 p.m. UTC | #1 
On Wed, 18 Aug 2021 09:12:30 +0200, Oleksij Rempel wrote:
> Some boards provide GPIO controllable termination resistor. Provide
> binding to make use of it.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
>  .../devicetree/bindings/net/can/can-controller.yaml      | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/can/can-controller.yaml b/Documentation/devicetree/bindings/net/can/can-controller.yaml
index 9cf2ae097156..1f0e98051074 100644
--- a/Documentation/devicetree/bindings/net/can/can-controller.yaml
+++ b/Documentation/devicetree/bindings/net/can/can-controller.yaml
@@ -13,6 +13,15 @@  properties:
   $nodename:
     pattern: "^can(@.*)?$"
 
+  termination-gpios:
+    description: GPIO pin to enable CAN bus termination.
+    maxItems: 1
+
+  termination-ohms:
+    description: The resistance value of the CAN bus termination resistor.
+    minimum: 1
+    maximum: 65535
+
 additionalProperties: true
 
 ...