| Message ID | 20210915035227.630204-1-linux@roeck-us.net |
|---|---|
| Headers | show |
| Series | Introduce and use absolute_pointer macro | expand |
On 9/15/21 12:13 AM, Geert Uytterhoeven wrote: > Hi Günter, > > On Wed, Sep 15, 2021 at 5:52 AM Guenter Roeck <linux@roeck-us.net> wrote: >> absolute_pointer() disassociates a pointer from its originating symbol >> type and context. Use it to prevent compiler warnings/errors such as >> >> drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe': >> ./arch/m68k/include/asm/string.h:72:25: error: >> '__builtin_memcpy' reading 6 bytes from a region of size 0 >> [-Werror=stringop-overread] >> >> Such warnings may be reported by gcc 11.x for string and memory operations >> on fixed addresses. >> >> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> >> Signed-off-by: Guenter Roeck <linux@roeck-us.net> >> --- >> v2: No change >> >> include/linux/compiler.h | 2 ++ >> 1 file changed, 2 insertions(+) >> >> diff --git a/include/linux/compiler.h b/include/linux/compiler.h >> index b67261a1e3e9..3d5af56337bd 100644 >> --- a/include/linux/compiler.h >> +++ b/include/linux/compiler.h >> @@ -188,6 +188,8 @@ void ftrace_likely_update(struct ftrace_likely_data *f, int val, >> (typeof(ptr)) (__ptr + (off)); }) >> #endif >> >> +#define absolute_pointer(val) RELOC_HIDE((void *)(val), 0) > > I guess we're not worried about "val" being evaluated multiple > times inside RELOC_HIDE(), as this is mainly intended for constants? > No, we are not. It is quite similar to RELOC_HIDE() in that regard. Guenter
On Wed, Sep 15, 2021 at 12:47 PM Linus Torvalds <torvalds@linux-foundation.org> wrote: > > What other notable issues end up being still live? I sent out that one > patch for sparc, but didn't get any response to it. I'm inclined to > just apply it (the 'struct mdesc_hdr' pointer misuse one). Oh, I forgot about the qnx4 one. That happens on sparc, possibly others, but not on x86-64. I'll go look at that patch too. Linus
On 9/15/21 9:47 PM, Linus Torvalds wrote: > On Wed, Sep 15, 2021 at 12:35 PM Guenter Roeck <linux@roeck-us.net> wrote: >> >> On a side note, we may revive the parisc patch. Helge isn't entirely >> happy with the other solution for parisc; it is quite invasive and >> touches a total of 19 files if I counted correctly. > > Ok, my suggestion to use the linker was not a "do it this way", it > really was just a "maybe alternate approach". So no objections if > absolute_pointer() ends up being the simpler solution. Yes, it's a lot simpler and makes backporting patches later much easier. I'll send a pull request with the updated parisc patch tomorrow. Thanks, Helge
On Wed, Sep 15, 2021 at 12:18:58PM -0700, Linus Torvalds wrote: > On Tue, Sep 14, 2021 at 8:52 PM Guenter Roeck <linux@roeck-us.net> wrote: > > > > This patch series introduces absolute_pointer() to fix the problem. > > absolute_pointer() disassociates a pointer from its originating symbol > > type and context, and thus prevents gcc from making assumptions about > > pointers passed to memory operations. > > Ok, I've applied this to my tree. > > I note that the physical BOOT_PCB addresses in the alpha setup.h file > might be useful for things like MILO in user space, but since I > couldn't even find MILO sources any more, I couldn't really check. > > I suspect alpha is basically on life support and presumably nobody > would ever compile a bootloader anyway, so it's unlikely to matter. > > If somebody does find any issues, we'll know better and we can ask > where the user space sources are that might use that alpha setup.h > file. I think everyone uses aboot now as the bootloader on Alpha. So as long as we can still compile aboot everyone should be happy. Cheers Michael.
On Wednesday, 2021-09-15 23:19 Linus Torvalds wrote: > Ok, I didn't love any of the patches I saw for the qnx4 problem, so I > silenced that warning with a new patch of my own. Like the sparc64 > case, the fix is to describe more extensively to the compiler what the > code is actually doing. thanks, looks good to me, too! > Looking at the qnx4 code-base history, I don't think it has gotten any > actual development outside of cleanups in the git history timeframe, > which makes me suspect nobody uses this code. > > But hey, maybe it just works so well for the very specialized user base ... it's actually the latter (although I guess the user base is shrinking) Cheers Anders
On Thu, Sep 16, 2021 at 12:02 AM Anders Larsen <al@alarsen.net> wrote: > > On Wednesday, 2021-09-15 23:19 Linus Torvalds wrote: > > > > But hey, maybe it just works so well for the very specialized user base ... > > it's actually the latter (although I guess the user base is shrinking) Hey, so if it's actively used, maybe you can answer a question or two that I have just because I looked at the code.. In particular, the inode number calculation is odd. Is there a reason for the "-1"? Because iboth the link case and the direct inode case have it, but t's a _different_ "-1": For the "inode_entry", it does ino = blknum * QNX4_INODES_PER_BLOCK + ix - 1; but it's worth noting that "ix" is zero-based (index within the block), so this kind of oddly removes one from a zero-based thing, and the 'ino' for the very first entry ends up being -1. Of course, it's possible that the first entry is always empty, but it does seem a bit odd. For the "link_info" case, it does ino = ( le32_to_cpu(de->link.dl_inode_blk) - 1 ) * QNX4_INODES_PER_BLOCK + de->link.dl_inode_ndx; so now it takes the _block_ index, and does that "-1" on it, and then multiplies it by the "entries per block" number, and adds the index. So now if both are zero, the inode number is -8, not -1. But all of this matches what the *lookup* code does. It's very odd, though. But to make it stranger, then in "qnx4_iget()", the calculations all makes sense. There it just does "take the inode number, and look up block and index into the block using it". Very strange and confusing. Because it means that iget() seems to look up a *different* inode entry than "lookup" and "readdir" actually look at. I must be missing something. I obviously didn't touch any of this logic, I was just doing the "make the type system clearer for the compiler". Also, I have to say, since I was looking at compiler output, the calculations in readdir() are made much worse by the fact that the dir->pos is a "loff_t". That's signed. And then you use "%" to get the index within a block. Using '%' instead of bitops is fairly equivalent, but only for (a) unsigned types (b) when the divisor is a compile-time power-of-2 In the qnx4 case, (b) is true, but (a) is not. Not a big deal. But usually, I tell people to avoid '% ENTRIES', because it really has very different behavior from '& MASK' for signed numbers. Linus
On Wed, Sep 15, 2021 at 3:33 PM Guenter Roeck <linux@roeck-us.net> wrote: > > drivers/net/ethernet/3com/3c515.c: In function 'corkscrew_start_xmit': > drivers/net/ethernet/3com/3c515.c:1053:22: error: > cast from pointer to integer of different size > > That is a typecast from a pointer to an int, which is then sent to an > i/o port. That driver should probably be disabled for 64-bit builds. Naah. I think the Jensen actually had an ISA slot. Came with a whopping 8MB too, so the ISA DMA should work just fine. Or maybe it was EISA only? I really don't remember. It's possible that alpha should get rid of the ISA config option, and use ISA_BUS instead. That would be the proper config if there aren't actually any ISA _slots_, and it would disable the 3c515 driver. But it turns out that the compile error is easy to fix. Just make it use isa_virt_to_bus(), which that driver does elsewhere anyway. I have no way - or interest - to test that on real hardware, but I did check that if I relax the config I can at least build it cleanly on x86-64 with that change. It can't make matters worse, and it's the RightThing(tm). Since Micheal replied about that other alpha issue, maybe he knows about the ISA slot situation too? But anyway, 3c515 should compile cleanly again. > drivers/net/wan/lmc/lmc_main.c: In function 'lmc_softreset': > drivers/net/wan/lmc/lmc_main.c:1782:50: error: > passing argument 1 of 'virt_to_bus' discards 'volatile' qualifier from pointer target type > > and several other similar errors. > > patch: > https://lore.kernel.org/lkml/20210909050033.1564459-1-linux@roeck-us.net/ > Arnd sent an Ack, but it doesn't look like it was picked up. I picked it up manually now along with the arm vexpress cpufreq one. > m68k: I think these should be fixed as of the pull request this morning. > mips: > > In file included from arch/mips/include/asm/sibyte/sb1250.h:28, > from drivers/watchdog/sb_wdog.c:58: > arch/mips/include/asm/sibyte/bcm1480_scd.h:261: error: "M_SPC_CFG_CLEAR" redefined > > and similar. Patch: > > https://patchwork.kernel.org/project/linux-watchdog/patch/20210913073220.1159520-1-liu.yun@linux.dev/ > > I'll need to get Wim to push it. Ok, that hasn't hit my tree yet. > parisc: This one should be fixed as of the parisc pull this morning. So a few more remaining (mainly the suspend/resume ones), but slowly making progress. Linus
On Wed, Sep 15, 2021 at 3:33 PM Guenter Roeck <linux@roeck-us.net> wrote: > > drivers/net/hamradio/6pack.c: In function 'sixpack_open': > drivers/net/hamradio/6pack.c:71:41: error: > unsigned conversion from 'int' to 'unsigned char' changes value from '256' to '0' > > patch: > https://lore.kernel.org/lkml/20210909035743.1247042-1-linux@roeck-us.net/ > David says it is wrong, and I don't know the code well enough > to feel comfortable touching that code. That may be a lost cause. > "depends on BROKEN if ALPHA" may be appropriate here. David is wrong. The code here is bogus, and the docs clearly state that the transmit data is in units of "10ms": https://www.linux-ax25.org/wiki/6PACK and that #define SIXP_TXDELAY (HZ/4) /* in 1 s */ is just wrong, and the actual *uses* of that TX timeout seems correct for that 10ms value: mod_timer(&sp->tx_t, jiffies + ((when + 1) * HZ) / 100); ie that "when" is clearly given in 100ths of a second, aka 10ms (ok, that's mainly SIXP_SLOTTIME, with SIXP_TXDELAY being used mainly to transfer the data to the other side). So from everything I can see, your patch is correct. Of course, to make things more confusing, the RESYNC_TIMEOUTs are indeed given in ticks. I spent too much time looking at this, but I'm going to apply that patch. I suspect either nobody uses that driver any more, or the TXDELAY values don't actually much matter, since they have clearly been wrong and depended on random kernel configs for a long long time. I think the most common HZ value on x86 tends to be the modern default of 250Hz, so the old "HZ/4" means that most people got a TXDELAY of 620ms, rather than the traditional expected 250ms. The fact that this shows up as an actual compile error on alpha is just random luck, since alpha uses a 1024Hz clock. CONFIG_HZ_1000 isn't impossible on other platforms either, which happens to compile cleanly, but causes that TXDELAY byte to sent out as 250, for a 2.5Hz TX delay. Of course, it is possible that it's the documentation that is wrong, but considering that the documentation matches the code (see above on that "((when + 1) * HZ)/100"), and matches the "it doesn't cause compiler warnings", I think it's pretty clear that your patch is the correct fix. Linus
On Thu, Sep 16, 2021 at 11:35:36AM -0700, Linus Torvalds wrote: > On Wed, Sep 15, 2021 at 3:33 PM Guenter Roeck <linux@roeck-us.net> wrote: > > > > drivers/net/ethernet/3com/3c515.c: In function 'corkscrew_start_xmit': > > drivers/net/ethernet/3com/3c515.c:1053:22: error: > > cast from pointer to integer of different size > > > > That is a typecast from a pointer to an int, which is then sent to an > > i/o port. That driver should probably be disabled for 64-bit builds. > > Naah. I think the Jensen actually had an ISA slot. Came with a > whopping 8MB too, so the ISA DMA should work just fine. > > Or maybe it was EISA only? I really don't remember. > > It's possible that alpha should get rid of the ISA config option, and > use ISA_BUS instead. That would be the proper config if there aren't > actually any ISA _slots_, and it would disable the 3c515 driver. > > But it turns out that the compile error is easy to fix. Just make it > use isa_virt_to_bus(), which that driver does elsewhere anyway. > > I have no way - or interest - to test that on real hardware, but I did > check that if I relax the config I can at least build it cleanly on > x86-64 with that change. > > It can't make matters worse, and it's the RightThing(tm). > > Since Micheal replied about that other alpha issue, maybe he knows > about the ISA slot situation too? Ah, yeah, not really. I am not familiar with the Jensen hardware, and have never played around with the EISA slot on the Alphas I do have. Cheers Michael.
Hi, > > On Thu, Sep 16, 2021 at 11:35:36AM -0700, Linus Torvalds wrote: > > On Wed, Sep 15, 2021 at 3:33 PM Guenter Roeck <linux@roeck-us.net> wrote: > > > > > > drivers/net/ethernet/3com/3c515.c: In function 'corkscrew_start_xmit': > > > drivers/net/ethernet/3com/3c515.c:1053:22: error: > > > cast from pointer to integer of different size > > > > > > That is a typecast from a pointer to an int, which is then sent to an > > > i/o port. That driver should probably be disabled for 64-bit builds. > > > > Naah. I think the Jensen actually had an ISA slot. Came with a > > whopping 8MB too, so the ISA DMA should work just fine. > > > > Or maybe it was EISA only? I really don't remember. It's EISA only. I've made some pictures of a somewhat dusty inside of a Jensen with 4 EISA cards (from bottom to top: SCSI, video, 2x network): http://alpha.ulrich-teichert.org/ (don't worry about the loose cable on one of the pictures, that's just my crude RTC battery replacment) > > I have no way - or interest - to test that on real hardware, but I did > > check that if I relax the config I can at least build it cleanly on > > x86-64 with that change. I could not get a recent kernel to boot, but it's booting ancient kernels just fine: Linux version 2.4.27-2-generic (tretkowski@bastille) (gcc version 3.3.5 (Debian 1:3.3.5-12)) #1 Sun May 29 18:40:58 UTC 2005 Booting GENERIC on Jensen using machine vector Jensen from SRM Major Options: LEGACY_START Command line: ro root=/dev/sda3 memcluster 0, usage 1, start 0, end 256 memcluster 1, usage 0, start 256, end 8192 freeing pages 256:384 freeing pages 757:8192 reserving pages 757:758 Initial ramdisk at: 0xfffffc00039d2000 (5308416 bytes) Max ASN from HWRPB is bad (0xf) On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: ro root=/dev/sda3 ... > > It can't make matters worse, and it's the RightThing(tm). > > > > Since Micheal replied about that other alpha issue, maybe he knows > > about the ISA slot situation too? > > Ah, yeah, not really. I am not familiar with the Jensen hardware, > and have never played around with the EISA slot on the Alphas I do > have. I know the feeling.... So many computers, so little time... While we're at it, during my vain attempts to get new kernels to boot, I tried to disable PCI support to make the kernels smaller (after all, the Jensen has only EISA, so what good would PCI support for?) and got it to compile with the attached patch (which fixes some warnings, too). Should apply cleanly to Linus tree. Enable compile for the Jensen without PCI support. Signed-off-by: Ulrich Teichert <ulrich.teichert@gmx.de> --- arch/alpha/include/asm/jensen.h | 8 ++++---- arch/alpha/kernel/sys_jensen.c | 2 +- include/asm-generic/pci_iomap.h | 6 +++++- 3 files changed, 10 insertions(+), 6 deletions(-) diff --git a/arch/alpha/include/asm/jensen.h b/arch/alpha/include/asm/jensen.h index 916895155a88..1c4131453db2 100644 --- a/arch/alpha/include/asm/jensen.h +++ b/arch/alpha/include/asm/jensen.h @@ -111,18 +111,18 @@ __EXTERN_INLINE void jensen_set_hae(unsigned long addr) * convinced that I need one of the newer machines. */ -static inline unsigned int jensen_local_inb(unsigned long addr) +__EXTERN_INLINE unsigned int jensen_local_inb(unsigned long addr) { return 0xff & *(vuip)((addr << 9) + EISA_VL82C106); } -static inline void jensen_local_outb(u8 b, unsigned long addr) +__EXTERN_INLINE void jensen_local_outb(u8 b, unsigned long addr) { *(vuip)((addr << 9) + EISA_VL82C106) = b; mb(); } -static inline unsigned int jensen_bus_inb(unsigned long addr) +__EXTERN_INLINE unsigned int jensen_bus_inb(unsigned long addr) { long result; @@ -131,7 +131,7 @@ static inline unsigned int jensen_bus_inb(unsigned long addr) return __kernel_extbl(result, addr & 3); } -static inline void jensen_bus_outb(u8 b, unsigned long addr) +__EXTERN_INLINE void jensen_bus_outb(u8 b, unsigned long addr) { jensen_set_hae(0); *(vuip)((addr << 7) + EISA_IO + 0x00) = b * 0x01010101; diff --git a/arch/alpha/kernel/sys_jensen.c b/arch/alpha/kernel/sys_jensen.c index e5d870ff225f..40db6c3d9690 100644 --- a/arch/alpha/kernel/sys_jensen.c +++ b/arch/alpha/kernel/sys_jensen.c @@ -17,7 +17,7 @@ #include <asm/ptrace.h> -#define __EXTERN_INLINE inline +#define __EXTERN_INLINE extern inline #include <asm/io.h> #include <asm/jensen.h> #undef __EXTERN_INLINE diff --git a/include/asm-generic/pci_iomap.h b/include/asm-generic/pci_iomap.h index df636c6d8e6c..446a0c576b33 100644 --- a/include/asm-generic/pci_iomap.h +++ b/include/asm-generic/pci_iomap.h @@ -18,6 +18,7 @@ extern void __iomem *pci_iomap_range(struct pci_dev *dev, int bar, extern void __iomem *pci_iomap_wc_range(struct pci_dev *dev, int bar, unsigned long offset, unsigned long maxlen); +extern void pci_iounmap(struct pci_dev *dev, void __iomem *p); /* Create a virtual mapping cookie for a port on a given PCI device. * Do not call this directly, it exists to make it easier for architectures * to override */ @@ -28,7 +29,7 @@ extern void __iomem *__pci_ioport_map(struct pci_dev *dev, unsigned long port, #define __pci_ioport_map(dev, port, nr) ioport_map((port), (nr)) #endif -#elif defined(CONFIG_GENERIC_PCI_IOMAP) +#elif defined(CONFIG_GENERIC_PCI_IOMAP) || !defined(CONFIG_PCI) static inline void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max) { return NULL; @@ -50,6 +51,9 @@ static inline void __iomem *pci_iomap_wc_range(struct pci_dev *dev, int bar, { return NULL; } +static inline void pci_iounmap(struct pci_dev *dev, void __iomem *p) +{ +} #endif #endif /* __ASM_GENERIC_PCI_IOMAP_H */ -- Dipl. Inf. Ulrich Teichert|e-mail: Ulrich.Teichert@gmx.de | Listening to: Stormweg 24 |Eat Lipstick: Dirty Little Secret, The Baboon Show: 24539 Neumuenster, Germany|Work Work Work, The Bellrays: Bad Reaction
On Sat, Sep 18, 2021 at 6:11 AM Ulrich Teichert <krypton@ulrich-teichert.org> wrote: > > Hi, > > > > > On Thu, Sep 16, 2021 at 11:35:36AM -0700, Linus Torvalds wrote: > > > Naah. I think the Jensen actually had an ISA slot. Came with a > > > whopping 8MB too, so the ISA DMA should work just fine. > > > > > > Or maybe it was EISA only? I really don't remember. > > It's EISA only. I've made some pictures of a somewhat dusty inside of > a Jensen with 4 EISA cards (from bottom to top: SCSI, video, 2x network): Ok. Looking around the config options, there _are_ systems with ISA slots, but it's not the old Jensen one. It's apparently some evaluation boards but also the "AlphaPC64" one. So we do want CONFIG_ISA for alpha, even if not Jensen. (I forget which alpha I had. For some reason I want to think I had an EISA machine and probably Jensen. Maybe upgraded to a 164 later?) > I could not get a recent kernel to boot, but it's booting ancient kernels > just fine: > > Linux version 2.4.27-2-generic (tretkowski@bastille) (gcc version 3.3.5 (Debian 1:3.3.5-12)) #1 Sun May 29 18:40:58 UTC 2005 Ouch. Without having some kind of bisection, I guess we'll never know. And I assume it's not really been tested since, so it could be multiple reasons, including compiler updates causing dodgy code to not work etc etc. > While we're at it, during my vain attempts to get new kernels to boot, > I tried to disable PCI support to make the kernels smaller (after all, > the Jensen has only EISA, so what good would PCI support for?) and > got it to compile with the attached patch (which fixes some warnings, > too). Can you send me your Jensen config? I do not see why you should be using that horrible __EXERN_INLINE. It will cause gcc to sometimes not inline at all, and not generate the out-of-line body either. Sometimes that is what you want: you want to generate one single body of the function, and particularly one that is _different_ from the inlining case (ie for inlining you want to do the simple thing, for out-of-line you do something fancier). But that isn't the case here, so this looks like a workaround for something else. But this code does end up using preprocessor concatenation etc, so I might be missing some case. Linus
On Sat, 18 Sep 2021, Linus Torvalds wrote: > > > On Thu, Sep 16, 2021 at 11:35:36AM -0700, Linus Torvalds wrote: > > > > Naah. I think the Jensen actually had an ISA slot. Came with a > > > > whopping 8MB too, so the ISA DMA should work just fine. > > > > > > > > Or maybe it was EISA only? I really don't remember. > > > > It's EISA only. I've made some pictures of a somewhat dusty inside of > So we do want CONFIG_ISA for alpha, even if not Jensen. Considering you can actually put ISA cards, 8 and 16 bit both, into EISA slots, I’d have assumed so. I don’t understand the “EISA only” question above. bye, //mirabilos (not using an Alpha but still using x86 ISA cards) -- <cnuke> den AGP stecker anfeilen, damit er in den slot aufm 440BX board passt… oder netzteile, an die man auch den monitor angeschlossen hat und die dann für ein elektrisch aufgeladenes gehäuse gesorgt haben […] für lacher gut auf jeder LAN party │ <nvb> damals, als der pizzateig noch auf dem monior "gegangen" ist
On Sat, Sep 18, 2021 at 10:17 AM Thorsten Glaser <t.glaser@tarent.de> wrote: > > Considering you can actually put ISA cards, 8 and 16 bit both, > into EISA slots, I’d have assumed so. I don’t understand the > “EISA only” question above. Oh, it's so long since I had one of those machines I didn't even remember that EISA took ISA cards too. But yeah, there are also apparently PCI-based alpha machines with actual ISA card slots. Linus
On Sat, Sep 18, 2021 at 10:04 AM Linus Torvalds <torvalds@linux-foundation.org> wrote: > > I do not see why you should be using that horrible __EXERN_INLINE. It > will cause gcc to sometimes not inline at all, and not generate the > out-of-line body either. Yeah, that patch doesn't work at all with my cross-compiler, and only results in alpha-linux-gnu-ld: arch/alpha/kernel/sys_jensen.o:(.ref.data+0x58): undefined reference to `jensen_ioread8' because some of those 'extern inline' cases are never instantiated. I'll look into it, we can make Jensen build again in case somebody then gets the energy to see what causes it to not boot. Linus
Hi, > > > On Thu, Sep 16, 2021 at 11:35:36AM -0700, Linus Torvalds wrote: > > > > Naah. I think the Jensen actually had an ISA slot. Came with a > > > > whopping 8MB too, so the ISA DMA should work just fine. > > > > > > > > Or maybe it was EISA only? I really don't remember. > > > > It's EISA only. I've made some pictures of a somewhat dusty inside of > > a Jensen with 4 EISA cards (from bottom to top: SCSI, video, 2x network): > > Ok. > > Looking around the config options, there _are_ systems with ISA slots, > but it's not the old Jensen one. It's apparently some evaluation > boards but also the "AlphaPC64" one. > > So we do want CONFIG_ISA for alpha, even if not Jensen. > > (I forget which alpha I had. For some reason I want to think I had an > EISA machine and probably Jensen. Maybe upgraded to a 164 later?) Well, as this was way back in 1995, it was perhaps a Multia? Also named UDB, a small "booksize" model. > > I could not get a recent kernel to boot, but it's booting ancient kernels > > just fine: > > > > Linux version 2.4.27-2-generic (tretkowski@bastille) (gcc version 3.3.5 (Debian 1:3.3.5-12)) #1 Sun May 29 18:40:58 UTC 2005 > > Ouch. Without having some kind of bisection, I guess we'll never know. > And I assume it's not really been tested since, so it could be > multiple reasons, including compiler updates causing dodgy code to not > work etc etc. Well, I doubt that bisecting will be practical going that way back. > > While we're at it, during my vain attempts to get new kernels to boot, > > I tried to disable PCI support to make the kernels smaller (after all, > > the Jensen has only EISA, so what good would PCI support for?) and > > got it to compile with the attached patch (which fixes some warnings, > > too). > > Can you send me your Jensen config? Sure, attached here. I don't know if it helps - I can't tell you why I used 4.18-rc5 for it, that was in 2018... Oh man, I am spending too much time at work... > I do not see why you should be using that horrible __EXERN_INLINE. It > will cause gcc to sometimes not inline at all, and not generate the > out-of-line body either. > > Sometimes that is what you want: you want to generate one single body > of the function, and particularly one that is _different_ from the > inlining case (ie for inlining you want to do the simple thing, for > out-of-line you do something fancier). > > But that isn't the case here, so this looks like a workaround for > something else. But this code does end up using preprocessor > concatenation etc, so I might be missing some case. I was just tinkering with it to get it compiled without warning, I certainly didn't get the big picture :-/ HTH, Uli -- Dipl. Inf. Ulrich Teichert|e-mail: Ulrich.Teichert@gmx.de | Listening to: Stormweg 24 |Eat Lipstick: Dirty Little Secret, The Baboon Show: 24539 Neumuenster, Germany|Work Work Work, The Bellrays: Bad Reaction # # Automatically generated file; DO NOT EDIT. # Linux/alpha 4.18.0-rc5 Kernel Configuration # # # Compiler: alpha-linux-gcc (GCC) 8.2.0 # CONFIG_ALPHA=y CONFIG_64BIT=y CONFIG_MMU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PGTABLE_LEVELS=3 CONFIG_CC_IS_GCC=y CONFIG_GCC_VERSION=80200 CONFIG_CLANG_VERSION=0 CONFIG_IRQ_WORK=y # # General setup # CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 # CONFIG_COMPILE_TEST is not set CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_DEFAULT_HOSTNAME="(none)" CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_CROSS_MEMORY_ATTACH=y CONFIG_USELIB=y CONFIG_HAVE_ARCH_AUDITSYSCALL=y # # IRQ subsystem # CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_IRQ_SHOW=y CONFIG_IRQ_DOMAIN=y # CONFIG_GENERIC_IRQ_DEBUGFS is not set CONFIG_GENERIC_CLOCKEVENTS=y # # Timers subsystem # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ_COMMON=y # CONFIG_HZ_PERIODIC is not set CONFIG_NO_HZ_IDLE=y # CONFIG_NO_HZ is not set CONFIG_HIGH_RES_TIMERS=y # # CPU/Task time and stats accounting # CONFIG_TICK_CPU_ACCOUNTING=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y # # RCU Subsystem # CONFIG_TINY_RCU=y # CONFIG_RCU_EXPERT is not set CONFIG_SRCU=y CONFIG_TINY_SRCU=y # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13 CONFIG_CGROUPS=y CONFIG_PAGE_COUNTER=y CONFIG_MEMCG=y CONFIG_MEMCG_SWAP=y # CONFIG_MEMCG_SWAP_ENABLED is not set CONFIG_BLK_CGROUP=y # CONFIG_DEBUG_BLK_CGROUP is not set CONFIG_CGROUP_WRITEBACK=y CONFIG_CGROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_CFS_BANDWIDTH is not set # CONFIG_RT_GROUP_SCHED is not set # CONFIG_CGROUP_PIDS is not set # CONFIG_CGROUP_RDMA is not set CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_DEVICE=y CONFIG_CGROUP_CPUACCT=y # CONFIG_CGROUP_PERF is not set # CONFIG_CGROUP_DEBUG is not set CONFIG_NAMESPACES=y CONFIG_UTS_NS=y CONFIG_IPC_NS=y CONFIG_USER_NS=y CONFIG_PID_NS=y CONFIG_SCHED_AUTOGROUP=y # CONFIG_SYSFS_DEPRECATED is not set CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y CONFIG_RD_XZ=y CONFIG_RD_LZO=y CONFIG_RD_LZ4=y # CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y CONFIG_HAVE_PCSPKR_PLATFORM=y CONFIG_EXPERT=y CONFIG_MULTIUSER=y CONFIG_SGETMASK_SYSCALL=y CONFIG_SYSFS_SYSCALL=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_FHANDLE=y CONFIG_POSIX_TIMERS=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_FUTEX_PI=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_ADVISE_SYSCALLS=y CONFIG_MEMBARRIER=y CONFIG_CHECKPOINT_RESTORE=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set CONFIG_KALLSYMS_BASE_RELATIVE=y # CONFIG_BPF_SYSCALL is not set # CONFIG_USERFAULTFD is not set # CONFIG_EMBEDDED is not set CONFIG_HAVE_PERF_EVENTS=y # CONFIG_PC104 is not set # # Kernel Performance Events And Counters # CONFIG_PERF_EVENTS=y # CONFIG_DEBUG_PERF_USE_VMALLOC is not set CONFIG_VM_EVENT_COUNTERS=y # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_SLAB_MERGE_DEFAULT=y # CONFIG_SLAB_FREELIST_RANDOM is not set # CONFIG_PROFILING is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_64BIT_ALIGNED_ACCESS=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y CONFIG_PLUGIN_HOSTCC="" CONFIG_CC_HAS_STACKPROTECTOR_NONE=y CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y CONFIG_HAVE_MOD_ARCH_SPECIFIC=y CONFIG_MODULES_USE_ELF_RELA=y CONFIG_ISA_BUS_API=y CONFIG_ODD_RT_SIGACTION=y CONFIG_OLD_SIGSUSPEND=y CONFIG_CPU_NO_EFFICIENT_FFS=y # CONFIG_REFCOUNT_FULL is not set # # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_MODULE_SIG is not set # CONFIG_MODULE_COMPRESS is not set CONFIG_MODULES_TREE_LOOKUP=y CONFIG_BLOCK=y CONFIG_BLK_SCSI_REQUEST=y CONFIG_BLK_DEV_BSG=y CONFIG_BLK_DEV_BSGLIB=y CONFIG_BLK_DEV_INTEGRITY=y # CONFIG_BLK_DEV_ZONED is not set CONFIG_BLK_DEV_THROTTLING=y # CONFIG_BLK_DEV_THROTTLING_LOW is not set # CONFIG_BLK_CMDLINE_PARSER is not set # CONFIG_BLK_WBT is not set CONFIG_BLK_DEBUG_FS=y # CONFIG_BLK_SED_OPAL is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_AIX_PARTITION is not set CONFIG_OSF_PARTITION=y # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y CONFIG_BSD_DISKLABEL=y # CONFIG_MINIX_SUBPARTITION is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_LDM_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set # CONFIG_CMDLINE_PARTITION is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y CONFIG_CFQ_GROUP_IOSCHED=y # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_MQ_IOSCHED_DEADLINE=y CONFIG_MQ_IOSCHED_KYBER=y # CONFIG_IOSCHED_BFQ is not set CONFIG_ASN1=m CONFIG_INLINE_SPIN_UNLOCK_IRQ=y CONFIG_INLINE_READ_UNLOCK=y CONFIG_INLINE_READ_UNLOCK_IRQ=y CONFIG_INLINE_WRITE_UNLOCK=y CONFIG_INLINE_WRITE_UNLOCK_IRQ=y CONFIG_FREEZER=y CONFIG_AUDIT_ARCH=y # # System setup # # CONFIG_ALPHA_GENERIC is not set # CONFIG_ALPHA_ALCOR is not set # CONFIG_ALPHA_XL is not set # CONFIG_ALPHA_BOOK1 is not set # CONFIG_ALPHA_AVANTI_CH is not set # CONFIG_ALPHA_CABRIOLET is not set # CONFIG_ALPHA_DP264 is not set # CONFIG_ALPHA_EB164 is not set # CONFIG_ALPHA_EB64P_CH is not set # CONFIG_ALPHA_EB66 is not set # CONFIG_ALPHA_EB66P is not set # CONFIG_ALPHA_EIGER is not set CONFIG_ALPHA_JENSEN=y # CONFIG_ALPHA_LX164 is not set # CONFIG_ALPHA_LYNX is not set # CONFIG_ALPHA_MARVEL is not set # CONFIG_ALPHA_MIATA is not set # CONFIG_ALPHA_MIKASA is not set # CONFIG_ALPHA_NAUTILUS is not set # CONFIG_ALPHA_NONAME_CH is not set # CONFIG_ALPHA_NORITAKE is not set # CONFIG_ALPHA_PC164 is not set # CONFIG_ALPHA_P2K is not set # CONFIG_ALPHA_RAWHIDE is not set # CONFIG_ALPHA_RUFFIAN is not set # CONFIG_ALPHA_RX164 is not set # CONFIG_ALPHA_SX164 is not set # CONFIG_ALPHA_SABLE is not set # CONFIG_ALPHA_SHARK is not set # CONFIG_ALPHA_TAKARA is not set # CONFIG_ALPHA_TITAN is not set # CONFIG_ALPHA_WILDFIRE is not set CONFIG_ISA=y CONFIG_ISA_DMA_API=y CONFIG_PCI_DOMAINS=y CONFIG_ALPHA_EV4=y CONFIG_GENERIC_HWEIGHT=y # CONFIG_ALPHA_QEMU is not set CONFIG_ALPHA_SRM=y CONFIG_EISA=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_COMPACTION=y CONFIG_MIGRATION=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_KSM=y CONFIG_DEFAULT_MMAP_MIN_ADDR=65536 CONFIG_NEED_PER_CPU_KM=y # CONFIG_CLEANCACHE is not set CONFIG_FRONTSWAP=y CONFIG_ZSWAP=y CONFIG_ZPOOL=y CONFIG_ZBUD=y # CONFIG_Z3FOLD is not set CONFIG_ZSMALLOC=y # CONFIG_PGTABLE_MAPPING is not set # CONFIG_ZSMALLOC_STAT is not set # CONFIG_IDLE_PAGE_TRACKING is not set # CONFIG_PERCPU_STATS is not set # CONFIG_GUP_BENCHMARK is not set # CONFIG_ALPHA_WTINT is not set # CONFIG_VERBOSE_MCHECK is not set # CONFIG_HZ_32 is not set # CONFIG_HZ_64 is not set # CONFIG_HZ_128 is not set # CONFIG_HZ_256 is not set CONFIG_HZ_1024=y # CONFIG_HZ_1200 is not set CONFIG_HZ=1024 # # PCI Endpoint # # CONFIG_PCI_ENDPOINT is not set CONFIG_EISA_VIRTUAL_ROOT=y CONFIG_EISA_NAMES=y # CONFIG_PCCARD is not set # CONFIG_SRM_ENV is not set CONFIG_BINFMT_ELF=y CONFIG_ELFCORE=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_BINFMT_SCRIPT=y CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_EM86 is not set CONFIG_BINFMT_MISC=m CONFIG_COREDUMP=y # CONFIG_NET is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER=y CONFIG_UEVENT_HELPER_PATH="" CONFIG_DEVTMPFS=y # CONFIG_DEVTMPFS_MOUNT is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # # Firmware loader # CONFIG_FW_LOADER=m CONFIG_EXTRA_FIRMWARE="" CONFIG_FW_LOADER_USER_HELPER=y # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set CONFIG_ALLOW_DEV_COREDUMP=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set # CONFIG_TEST_ASYNC_DRIVER_PROBE is not set CONFIG_GENERIC_CPU_VULNERABILITIES=y CONFIG_REGMAP=y CONFIG_REGMAP_I2C=m CONFIG_REGMAP_SPI=m CONFIG_DMA_SHARED_BUFFER=y # CONFIG_DMA_FENCE_TRACE is not set # # Bus devices # # CONFIG_MTD is not set # CONFIG_OF is not set CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y CONFIG_PARPORT=m CONFIG_PARPORT_PC=m # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_AX88796 is not set CONFIG_PARPORT_1284=y CONFIG_PNP=y CONFIG_PNP_DEBUG_MESSAGES=y # # Protocols # CONFIG_ISAPNP=y CONFIG_BLK_DEV=y CONFIG_BLK_DEV_NULL_BLK=m CONFIG_BLK_DEV_FD=m CONFIG_CDROM=m # CONFIG_PARIDE is not set CONFIG_ZRAM=m # CONFIG_ZRAM_WRITEBACK is not set # CONFIG_ZRAM_MEMORY_TRACKING is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 # CONFIG_BLK_DEV_CRYPTOLOOP is not set # # DRBD disabled because PROC_FS or INET not selected # CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=16384 CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set # # NVME Support # # CONFIG_NVME_FC is not set # CONFIG_NVME_TARGET is not set # # Misc devices # CONFIG_SENSORS_LIS3LV02D=m CONFIG_AD525X_DPOT=m CONFIG_AD525X_DPOT_I2C=m CONFIG_AD525X_DPOT_SPI=m # CONFIG_DUMMY_IRQ is not set CONFIG_ICS932S401=m CONFIG_ENCLOSURE_SERVICES=m CONFIG_APDS9802ALS=m CONFIG_ISL29003=m CONFIG_ISL29020=m CONFIG_SENSORS_TSL2550=m CONFIG_SENSORS_BH1770=m CONFIG_SENSORS_APDS990X=m CONFIG_HMC6352=m CONFIG_DS1682=m # CONFIG_USB_SWITCH_FSA9480 is not set # CONFIG_LATTICE_ECP3_CONFIG is not set # CONFIG_SRAM is not set # CONFIG_C2PORT is not set # # EEPROM support # CONFIG_EEPROM_AT24=m CONFIG_EEPROM_AT25=m CONFIG_EEPROM_LEGACY=m CONFIG_EEPROM_MAX6875=m CONFIG_EEPROM_93CX6=m # CONFIG_EEPROM_93XX46 is not set # CONFIG_EEPROM_IDT_89HPESX is not set # # Texas Instruments shared transport line discipline # # CONFIG_SENSORS_LIS3_SPI is not set CONFIG_SENSORS_LIS3_I2C=m # # Altera FPGA firmware download module (requires I2C) # CONFIG_ALTERA_STAPL=m # # Intel MIC & related support # # # Intel MIC Bus Driver # # # SCIF Bus Driver # # # VOP Bus Driver # # # Intel MIC Host Driver # # # Intel MIC Card Driver # # # SCIF Driver # # # Intel MIC Coprocessor State Management (COSM) Drivers # # # VOP Driver # # CONFIG_ECHO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # CONFIG_SCSI_MOD=m CONFIG_RAID_ATTRS=m CONFIG_SCSI=m CONFIG_SCSI_DMA=y # CONFIG_SCSI_MQ_DEFAULT is not set # CONFIG_SCSI_PROC_FS is not set # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=m CONFIG_CHR_DEV_ST=m CONFIG_CHR_DEV_OSST=m CONFIG_BLK_DEV_SR=m CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_CHR_DEV_SCH=m CONFIG_SCSI_ENCLOSURE=m CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=m CONFIG_SCSI_SAS_LIBSAS=m CONFIG_SCSI_SAS_ATA=y CONFIG_SCSI_SAS_HOST_SMP=y CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_BOOT_SYSFS=m # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set CONFIG_SCSI_AHA1740=m CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_CMDS_PER_DEVICE=8 CONFIG_AIC7XXX_RESET_DELAY_MS=15000 CONFIG_AIC7XXX_DEBUG_ENABLE=y CONFIG_AIC7XXX_DEBUG_MASK=0 CONFIG_AIC7XXX_REG_PRETTY_PRINT=y CONFIG_SCSI_ADVANSYS=m CONFIG_SCSI_UFSHCD=m # CONFIG_SCSI_UFSHCD_PLATFORM is not set CONFIG_SCSI_BUSLOGIC=m CONFIG_SCSI_GDTH=m # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_SIM710 is not set CONFIG_SCSI_DEBUG=m # CONFIG_SCSI_DH is not set CONFIG_SCSI_OSD_INITIATOR=m CONFIG_SCSI_OSD_ULD=m CONFIG_SCSI_OSD_DPRINT_SENSE=1 # CONFIG_SCSI_OSD_DEBUG is not set CONFIG_ATA=m CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # # Controllers with non-SFF native interface # # CONFIG_SATA_AHCI_PLATFORM is not set CONFIG_ATA_SFF=y # # SFF controllers with custom DMA interface # CONFIG_ATA_BMDMA=y # # SATA SFF controllers with BMDMA # # CONFIG_SATA_DWC is not set # # PATA SFF controllers with BMDMA # # # PIO-only SFF controllers # # CONFIG_PATA_ISAPNP is not set # CONFIG_PATA_PLATFORM is not set # CONFIG_PATA_QDI is not set # CONFIG_PATA_WINBOND_VLB is not set # # Generic fallback / legacy drivers # # CONFIG_PATA_LEGACY is not set # CONFIG_MD is not set # CONFIG_TARGET_CORE is not set # # Input device support # CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=m CONFIG_INPUT_POLLDEV=m CONFIG_INPUT_SPARSEKMAP=m CONFIG_INPUT_MATRIXKMAP=m # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_JOYDEV=m CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ADP5588=m # CONFIG_KEYBOARD_ADP5589 is not set CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_QT1070 is not set CONFIG_KEYBOARD_QT2160=m # CONFIG_KEYBOARD_DLINK_DIR685 is not set CONFIG_KEYBOARD_LKKBD=m # CONFIG_KEYBOARD_TCA6416 is not set # CONFIG_KEYBOARD_TCA8418 is not set # CONFIG_KEYBOARD_LM8333 is not set CONFIG_KEYBOARD_MAX7359=m # CONFIG_KEYBOARD_MCS is not set # CONFIG_KEYBOARD_MPR121 is not set CONFIG_KEYBOARD_NEWTON=m CONFIG_KEYBOARD_OPENCORES=m CONFIG_KEYBOARD_STOWAWAY=m CONFIG_KEYBOARD_SUNKBD=m CONFIG_KEYBOARD_XTKBD=m CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_BYD=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y CONFIG_MOUSE_PS2_CYPRESS=y CONFIG_MOUSE_PS2_TRACKPOINT=y CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y CONFIG_MOUSE_PS2_SENTELIC=y # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_PS2_FOCALTECH=y CONFIG_MOUSE_PS2_SMBUS=y CONFIG_MOUSE_SERIAL=m CONFIG_MOUSE_CYAPA=m # CONFIG_MOUSE_ELAN_I2C is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set CONFIG_MOUSE_VSXXXAA=m CONFIG_MOUSE_SYNAPTICS_I2C=m CONFIG_INPUT_JOYSTICK=y CONFIG_JOYSTICK_ANALOG=m CONFIG_JOYSTICK_A3D=m CONFIG_JOYSTICK_ADI=m CONFIG_JOYSTICK_COBRA=m CONFIG_JOYSTICK_GF2K=m CONFIG_JOYSTICK_GRIP=m CONFIG_JOYSTICK_GRIP_MP=m CONFIG_JOYSTICK_GUILLEMOT=m CONFIG_JOYSTICK_INTERACT=m CONFIG_JOYSTICK_SIDEWINDER=m CONFIG_JOYSTICK_TMDC=m CONFIG_JOYSTICK_IFORCE=m CONFIG_JOYSTICK_IFORCE_232=y CONFIG_JOYSTICK_WARRIOR=m CONFIG_JOYSTICK_MAGELLAN=m CONFIG_JOYSTICK_SPACEORB=m CONFIG_JOYSTICK_SPACEBALL=m CONFIG_JOYSTICK_STINGER=m CONFIG_JOYSTICK_TWIDJOY=m CONFIG_JOYSTICK_ZHENHUA=m CONFIG_JOYSTICK_DB9=m CONFIG_JOYSTICK_GAMECON=m CONFIG_JOYSTICK_TURBOGRAFX=m # CONFIG_JOYSTICK_AS5011 is not set CONFIG_JOYSTICK_JOYDUMP=m CONFIG_JOYSTICK_WALKERA0701=m # CONFIG_JOYSTICK_PSXPAD_SPI is not set CONFIG_INPUT_TABLET=y # CONFIG_TABLET_SERIAL_WACOM4 is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_PROPERTIES=y CONFIG_TOUCHSCREEN_ADS7846=m CONFIG_TOUCHSCREEN_AD7877=m CONFIG_TOUCHSCREEN_AD7879=m CONFIG_TOUCHSCREEN_AD7879_I2C=m # CONFIG_TOUCHSCREEN_AD7879_SPI is not set CONFIG_TOUCHSCREEN_ATMEL_MXT=m # CONFIG_TOUCHSCREEN_BU21013 is not set # CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set # CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set CONFIG_TOUCHSCREEN_DYNAPRO=m CONFIG_TOUCHSCREEN_HAMPSHIRE=m CONFIG_TOUCHSCREEN_EETI=m # CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set # CONFIG_TOUCHSCREEN_EXC3000 is not set CONFIG_TOUCHSCREEN_FUJITSU=m # CONFIG_TOUCHSCREEN_HIDEEP is not set # CONFIG_TOUCHSCREEN_ILI210X is not set # CONFIG_TOUCHSCREEN_S6SY761 is not set CONFIG_TOUCHSCREEN_GUNZE=m # CONFIG_TOUCHSCREEN_EKTF2127 is not set # CONFIG_TOUCHSCREEN_ELAN is not set CONFIG_TOUCHSCREEN_ELO=m CONFIG_TOUCHSCREEN_WACOM_W8001=m # CONFIG_TOUCHSCREEN_WACOM_I2C is not set # CONFIG_TOUCHSCREEN_MAX11801 is not set CONFIG_TOUCHSCREEN_MCS5000=m # CONFIG_TOUCHSCREEN_MMS114 is not set # CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set CONFIG_TOUCHSCREEN_MTOUCH=m CONFIG_TOUCHSCREEN_INEXIO=m CONFIG_TOUCHSCREEN_MK712=m # CONFIG_TOUCHSCREEN_HTCPEN is not set CONFIG_TOUCHSCREEN_PENMOUNT=m # CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set CONFIG_TOUCHSCREEN_TOUCHRIGHT=m CONFIG_TOUCHSCREEN_TOUCHWIN=m # CONFIG_TOUCHSCREEN_PIXCIR is not set # CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set CONFIG_TOUCHSCREEN_TOUCHIT213=m CONFIG_TOUCHSCREEN_TSC_SERIO=m # CONFIG_TOUCHSCREEN_TSC2004 is not set # CONFIG_TOUCHSCREEN_TSC2005 is not set CONFIG_TOUCHSCREEN_TSC2007=m # CONFIG_TOUCHSCREEN_SILEAD is not set # CONFIG_TOUCHSCREEN_ST1232 is not set # CONFIG_TOUCHSCREEN_SX8654 is not set CONFIG_TOUCHSCREEN_TPS6507X=m # CONFIG_TOUCHSCREEN_ZET6223 is not set # CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set CONFIG_INPUT_MISC=y # CONFIG_INPUT_AD714X is not set # CONFIG_INPUT_BMA150 is not set # CONFIG_INPUT_E3X0_BUTTON is not set CONFIG_INPUT_PCSPKR=m # CONFIG_INPUT_MMA8450 is not set # CONFIG_INPUT_KXTJ9 is not set CONFIG_INPUT_UINPUT=m # CONFIG_INPUT_PCF8574 is not set # CONFIG_INPUT_ADXL34X is not set # CONFIG_INPUT_CMA3000 is not set CONFIG_INPUT_IDEAPAD_SLIDEBAR=m # CONFIG_INPUT_DRV2665_HAPTICS is not set # CONFIG_INPUT_DRV2667_HAPTICS is not set CONFIG_RMI4_CORE=m # CONFIG_RMI4_I2C is not set # CONFIG_RMI4_SPI is not set # CONFIG_RMI4_SMB is not set CONFIG_RMI4_F03=y CONFIG_RMI4_F03_SERIO=m CONFIG_RMI4_2D_SENSOR=y CONFIG_RMI4_F11=y CONFIG_RMI4_F12=y CONFIG_RMI4_F30=y # CONFIG_RMI4_F34 is not set # CONFIG_RMI4_F55 is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=m CONFIG_SERIO_PARKBD=m CONFIG_SERIO_LIBPS2=y CONFIG_SERIO_RAW=m CONFIG_SERIO_ALTERA_PS2=m # CONFIG_SERIO_PS2MULT is not set # CONFIG_SERIO_ARC_PS2 is not set # CONFIG_USERIO is not set CONFIG_GAMEPORT=m CONFIG_GAMEPORT_NS558=m CONFIG_GAMEPORT_L4=m # # Character devices # CONFIG_TTY=y CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_TRACE_SINK is not set CONFIG_DEVMEM=y # CONFIG_DEVKMEM is not set # # Serial drivers # CONFIG_SERIAL_EARLYCON=y CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set CONFIG_SERIAL_8250_PNP=y # CONFIG_SERIAL_8250_FINTEK is not set CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_DMA=y CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y # CONFIG_SERIAL_8250_FOURPORT is not set # CONFIG_SERIAL_8250_ACCENT is not set # CONFIG_SERIAL_8250_BOCA is not set # CONFIG_SERIAL_8250_EXAR_ST16C554 is not set # CONFIG_SERIAL_8250_HUB6 is not set CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set # CONFIG_SERIAL_8250_RSA is not set # CONFIG_SERIAL_8250_DW is not set # CONFIG_SERIAL_8250_RT288X is not set # # Non-8250 serial port support # # CONFIG_SERIAL_MAX3100 is not set # CONFIG_SERIAL_MAX310X is not set # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_SCCNXP is not set # CONFIG_SERIAL_SC16IS7XX is not set # CONFIG_SERIAL_ALTERA_JTAGUART is not set # CONFIG_SERIAL_ALTERA_UART is not set # CONFIG_SERIAL_ARC is not set # CONFIG_SERIAL_FSL_LPUART is not set # CONFIG_SERIAL_DEV_BUS is not set # CONFIG_TTY_PRINTK is not set CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set CONFIG_PPDEV=m CONFIG_IPMI_HANDLER=m # CONFIG_IPMI_PANIC_EVENT is not set CONFIG_IPMI_DEVICE_INTERFACE=m CONFIG_IPMI_SI=m # CONFIG_IPMI_SSIF is not set CONFIG_IPMI_WATCHDOG=m CONFIG_IPMI_POWEROFF=m CONFIG_HW_RANDOM=m # CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_DTLK is not set CONFIG_R3964=m CONFIG_RAW_DRIVER=m CONFIG_MAX_RAW_DEVS=256 CONFIG_TCG_TPM=m CONFIG_HW_RANDOM_TPM=y # CONFIG_TCG_TIS_SPI is not set CONFIG_TCG_TIS_I2C_ATMEL=m CONFIG_TCG_TIS_I2C_INFINEON=m CONFIG_TCG_TIS_I2C_NUVOTON=m CONFIG_TCG_ATMEL=m # CONFIG_TCG_INFINEON is not set # CONFIG_TCG_VTPM_PROXY is not set # CONFIG_TCG_TIS_ST33ZP24_I2C is not set # CONFIG_TCG_TIS_ST33ZP24_SPI is not set CONFIG_DEVPORT=y # # I2C support # CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_MUX=m # # Multiplexer I2C Chip support # # CONFIG_I2C_MUX_LTC4306 is not set # CONFIG_I2C_MUX_PCA9541 is not set # CONFIG_I2C_MUX_REG is not set # CONFIG_I2C_MUX_MLXCPLD is not set CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_SMBUS=m CONFIG_I2C_ALGOBIT=m CONFIG_I2C_ALGOPCA=m # # I2C Hardware Bus support # # # I2C system bus drivers (mostly embedded / system-on-chip) # CONFIG_I2C_DESIGNWARE_CORE=m CONFIG_I2C_DESIGNWARE_PLATFORM=m # CONFIG_I2C_DESIGNWARE_SLAVE is not set CONFIG_I2C_KEMPLD=m CONFIG_I2C_OCORES=m CONFIG_I2C_PCA_PLATFORM=m CONFIG_I2C_SIMTEC=m # CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers # CONFIG_I2C_PARPORT=m CONFIG_I2C_PARPORT_LIGHT=m CONFIG_I2C_TAOS_EVM=m # # Other I2C/SMBus bus drivers # # CONFIG_I2C_ELEKTOR is not set # CONFIG_I2C_PCA_ISA is not set CONFIG_I2C_STUB=m # CONFIG_I2C_SLAVE is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y CONFIG_SPI_MEM=y # # SPI Master Controller Drivers # # CONFIG_SPI_ALTERA is not set # CONFIG_SPI_AXI_SPI_ENGINE is not set CONFIG_SPI_BITBANG=m CONFIG_SPI_BUTTERFLY=m # CONFIG_SPI_CADENCE is not set # CONFIG_SPI_DESIGNWARE is not set CONFIG_SPI_LM70_LLP=m # CONFIG_SPI_ROCKCHIP is not set # CONFIG_SPI_SC18IS602 is not set # CONFIG_SPI_XCOMM is not set # CONFIG_SPI_XILINX is not set # CONFIG_SPI_ZYNQMP_GQSPI is not set # # SPI Protocol Masters # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_LOOPBACK_TEST is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_SPI_SLAVE is not set # CONFIG_SPMI is not set # CONFIG_HSI is not set CONFIG_PPS=m # CONFIG_PPS_DEBUG is not set # # PPS clients support # # CONFIG_PPS_CLIENT_KTIMER is not set CONFIG_PPS_CLIENT_LDISC=m CONFIG_PPS_CLIENT_PARPORT=m # CONFIG_PPS_CLIENT_GPIO is not set # # PPS generators support # # # PTP clock support # # # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. # # CONFIG_PINCTRL is not set # CONFIG_GPIOLIB is not set CONFIG_W1=m # # 1-wire Bus Masters # CONFIG_W1_MASTER_DS2482=m # CONFIG_W1_MASTER_DS1WM is not set # # 1-wire Slaves # CONFIG_W1_SLAVE_THERM=m CONFIG_W1_SLAVE_SMEM=m # CONFIG_W1_SLAVE_DS2405 is not set # CONFIG_W1_SLAVE_DS2408 is not set # CONFIG_W1_SLAVE_DS2413 is not set # CONFIG_W1_SLAVE_DS2406 is not set # CONFIG_W1_SLAVE_DS2423 is not set # CONFIG_W1_SLAVE_DS2805 is not set CONFIG_W1_SLAVE_DS2431=m CONFIG_W1_SLAVE_DS2433=m # CONFIG_W1_SLAVE_DS2433_CRC is not set # CONFIG_W1_SLAVE_DS2438 is not set # CONFIG_W1_SLAVE_DS2760 is not set # CONFIG_W1_SLAVE_DS2780 is not set # CONFIG_W1_SLAVE_DS2781 is not set # CONFIG_W1_SLAVE_DS28E04 is not set # CONFIG_W1_SLAVE_DS28E17 is not set # CONFIG_POWER_AVS is not set # CONFIG_POWER_RESET is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_TEST_POWER is not set # CONFIG_BATTERY_DS2780 is not set # CONFIG_BATTERY_DS2781 is not set # CONFIG_BATTERY_DS2782 is not set CONFIG_BATTERY_SBS=m # CONFIG_CHARGER_SBS is not set # CONFIG_BATTERY_BQ27XXX is not set # CONFIG_BATTERY_MAX17040 is not set # CONFIG_BATTERY_MAX17042 is not set # CONFIG_BATTERY_MAX1721X is not set # CONFIG_CHARGER_MAX8903 is not set # CONFIG_CHARGER_LP8727 is not set # CONFIG_CHARGER_BQ2415X is not set # CONFIG_CHARGER_SMB347 is not set # CONFIG_BATTERY_GAUGE_LTC2941 is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set CONFIG_BCMA_POSSIBLE=y # CONFIG_BCMA is not set # # Multifunction device drivers # CONFIG_MFD_CORE=m # CONFIG_MFD_BCM590XX is not set # CONFIG_MFD_BD9571MWV is not set # CONFIG_MFD_AXP20X_I2C is not set # CONFIG_MFD_DA9052_SPI is not set # CONFIG_MFD_DA9062 is not set # CONFIG_MFD_DA9063 is not set # CONFIG_MFD_DA9150 is not set # CONFIG_MFD_MC13XXX_SPI is not set # CONFIG_MFD_MC13XXX_I2C is not set # CONFIG_HTC_PASIC3 is not set CONFIG_MFD_KEMPLD=m # CONFIG_MFD_88PM800 is not set # CONFIG_MFD_88PM805 is not set # CONFIG_MFD_MAX14577 is not set # CONFIG_MFD_MAX77693 is not set # CONFIG_MFD_MAX8907 is not set # CONFIG_MFD_MT6397 is not set # CONFIG_MFD_MENF21BMC is not set # CONFIG_EZX_PCAP is not set # CONFIG_MFD_RETU is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_RT5033 is not set # CONFIG_MFD_SI476X_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_SKY81452 is not set # CONFIG_ABX500_CORE is not set # CONFIG_MFD_SYSCON is not set # CONFIG_MFD_TI_AM335X_TSCADC is not set # CONFIG_MFD_LP3943 is not set # CONFIG_MFD_TI_LMU is not set # CONFIG_TPS6105X is not set # CONFIG_TPS6507X is not set # CONFIG_MFD_TPS65086 is not set # CONFIG_MFD_TI_LP873X is not set # CONFIG_MFD_TPS65912_I2C is not set # CONFIG_MFD_TPS65912_SPI is not set # CONFIG_MFD_WL1273_CORE is not set # CONFIG_MFD_LM3533 is not set # CONFIG_MFD_ARIZONA_I2C is not set # CONFIG_MFD_ARIZONA_SPI is not set # CONFIG_MFD_WM831X_SPI is not set # CONFIG_MFD_WM8994 is not set # CONFIG_REGULATOR is not set # CONFIG_RC_CORE is not set # CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_DRM is not set # # ACP (Audio CoProcessor) Configuration # # # AMD Library routines # # # Frame buffer Devices # CONFIG_FB=m CONFIG_FIRMWARE_EDID=y CONFIG_FB_CMDLINE=y CONFIG_FB_NOTIFY=y CONFIG_FB_SYS_FILLRECT=m CONFIG_FB_SYS_COPYAREA=m CONFIG_FB_SYS_IMAGEBLIT=m # CONFIG_FB_FOREIGN_ENDIAN is not set CONFIG_FB_SYS_FOPS=m CONFIG_FB_DEFERRED_IO=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # # Frame buffer hardware drivers # # CONFIG_FB_TGA is not set # CONFIG_FB_OPENCORES is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_IBM_GXT4500 is not set CONFIG_FB_VIRTUAL=m # CONFIG_FB_METRONOME is not set # CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=80 CONFIG_DUMMY_CONSOLE_ROWS=25 CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y # CONFIG_LOGO is not set # CONFIG_SOUND is not set # # HID support # CONFIG_HID=m # CONFIG_HID_BATTERY_STRENGTH is not set CONFIG_HIDRAW=y CONFIG_UHID=m CONFIG_HID_GENERIC=m # # Special HID drivers # CONFIG_HID_A4TECH=m CONFIG_HID_ACRUX=m CONFIG_HID_ACRUX_FF=y CONFIG_HID_APPLE=m CONFIG_HID_AUREAL=m CONFIG_HID_BELKIN=m CONFIG_HID_CHERRY=m CONFIG_HID_CHICONY=m # CONFIG_HID_CMEDIA is not set CONFIG_HID_CYPRESS=m CONFIG_HID_DRAGONRISE=m CONFIG_DRAGONRISE_FF=y CONFIG_HID_EMS_FF=m CONFIG_HID_ELECOM=m CONFIG_HID_EZKEY=m # CONFIG_HID_GEMBIRD is not set # CONFIG_HID_GFRM is not set CONFIG_HID_KEYTOUCH=m CONFIG_HID_KYE=m CONFIG_HID_WALTOP=m CONFIG_HID_GYRATION=m CONFIG_HID_ICADE=m # CONFIG_HID_ITE is not set # CONFIG_HID_JABRA is not set CONFIG_HID_TWINHAN=m CONFIG_HID_KENSINGTON=m CONFIG_HID_LCPOWER=m # CONFIG_HID_LENOVO is not set CONFIG_HID_LOGITECH=m CONFIG_HID_LOGITECH_DJ=m CONFIG_HID_LOGITECH_HIDPP=m CONFIG_LOGITECH_FF=y CONFIG_LOGIRUMBLEPAD2_FF=y CONFIG_LOGIG940_FF=y CONFIG_LOGIWHEELS_FF=y CONFIG_HID_MAGICMOUSE=m # CONFIG_HID_MAYFLASH is not set # CONFIG_HID_REDRAGON is not set CONFIG_HID_MICROSOFT=m CONFIG_HID_MONTEREY=m CONFIG_HID_MULTITOUCH=m # CONFIG_HID_NTI is not set CONFIG_HID_ORTEK=m CONFIG_HID_PANTHERLORD=m CONFIG_PANTHERLORD_FF=y CONFIG_HID_PETALYNX=m CONFIG_HID_PICOLCD=m CONFIG_HID_PICOLCD_FB=y # CONFIG_HID_PLANTRONICS is not set CONFIG_HID_PRIMAX=m CONFIG_HID_SAITEK=m CONFIG_HID_SAMSUNG=m CONFIG_HID_SPEEDLINK=m # CONFIG_HID_STEAM is not set CONFIG_HID_STEELSERIES=m CONFIG_HID_SUNPLUS=m CONFIG_HID_RMI=m CONFIG_HID_GREENASIA=m CONFIG_GREENASIA_FF=y CONFIG_HID_SMARTJOYPLUS=m CONFIG_SMARTJOYPLUS_FF=y CONFIG_HID_TIVO=m CONFIG_HID_TOPSEED=m CONFIG_HID_THRUSTMASTER=m CONFIG_THRUSTMASTER_FF=y # CONFIG_HID_UDRAW_PS3 is not set CONFIG_HID_XINMO=m CONFIG_HID_ZEROPLUS=m CONFIG_ZEROPLUS_FF=y CONFIG_HID_ZYDACRON=m CONFIG_HID_SENSOR_HUB=m # CONFIG_HID_SENSOR_CUSTOM_SENSOR is not set # CONFIG_HID_ALPS is not set # # I2C HID support # CONFIG_I2C_HID=m CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_SUPPORT is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_MC146818_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" CONFIG_RTC_SYSTOHC=y CONFIG_RTC_SYSTOHC_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set CONFIG_RTC_NVMEM=y # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # CONFIG_RTC_DRV_TEST is not set # # I2C RTC drivers # # CONFIG_RTC_DRV_ABB5ZES3 is not set # CONFIG_RTC_DRV_ABX80X is not set # CONFIG_RTC_DRV_DS1307 is not set # CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_ISL12022 is not set # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8523 is not set # CONFIG_RTC_DRV_PCF85063 is not set # CONFIG_RTC_DRV_PCF85363 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8010 is not set # CONFIG_RTC_DRV_RX8581 is not set # CONFIG_RTC_DRV_RX8025 is not set # CONFIG_RTC_DRV_EM3027 is not set # CONFIG_RTC_DRV_RV8803 is not set # # SPI RTC drivers # # CONFIG_RTC_DRV_M41T93 is not set # CONFIG_RTC_DRV_M41T94 is not set # CONFIG_RTC_DRV_DS1302 is not set # CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_DS1343 is not set # CONFIG_RTC_DRV_DS1347 is not set # CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6916 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RX4581 is not set # CONFIG_RTC_DRV_RX6110 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_PCF2123 is not set # CONFIG_RTC_DRV_MCP795 is not set CONFIG_RTC_I2C_AND_SPI=m # # SPI and I2C RTC drivers # # CONFIG_RTC_DRV_DS3232 is not set # CONFIG_RTC_DRV_PCF2127 is not set # CONFIG_RTC_DRV_RV3029C2 is not set # # Platform RTC drivers # CONFIG_RTC_DRV_ALPHA=y # CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1685_FAMILY is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_DS2404 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # # CONFIG_RTC_DRV_FTRTC010 is not set # # HID Sensor RTC drivers # CONFIG_DMADEVICES=y # CONFIG_DMADEVICES_DEBUG is not set # # DMA Devices # # CONFIG_ALTERA_MSGDMA is not set # CONFIG_INTEL_IDMA64 is not set # CONFIG_QCOM_HIDMA_MGMT is not set # CONFIG_QCOM_HIDMA is not set # CONFIG_DW_DMAC is not set # # DMABUF options # CONFIG_SYNC_FILE=y # CONFIG_SW_SYNC is not set # CONFIG_AUXDISPLAY is not set # CONFIG_PANEL is not set CONFIG_UIO=m # CONFIG_UIO_PDRV_GENIRQ is not set # CONFIG_UIO_DMEM_GENIRQ is not set # CONFIG_UIO_PRUSS is not set # CONFIG_VIRT_DRIVERS is not set # CONFIG_VIRTIO_MENU is not set # # Microsoft Hyper-V guest support # # CONFIG_STAGING is not set # CONFIG_HWSPINLOCK is not set # # Clock Source drivers # CONFIG_I8253_LOCK=y CONFIG_CLKBLD_I8253=y # CONFIG_MAILBOX is not set CONFIG_IOMMU_SUPPORT=y # # Generic IOMMU Pagetable Support # # # Remoteproc drivers # # CONFIG_REMOTEPROC is not set # # Rpmsg drivers # # CONFIG_RPMSG_VIRTIO is not set # CONFIG_SOUNDWIRE is not set # # SOC (System On Chip) specific Drivers # # # Amlogic SoC drivers # # # Broadcom SoC drivers # # # i.MX SoC drivers # # # Qualcomm SoC drivers # # CONFIG_SOC_TI is not set # # Xilinx SoC drivers # # CONFIG_XILINX_VCU is not set CONFIG_PM_DEVFREQ=y # # DEVFREQ Governors # CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m # CONFIG_DEVFREQ_GOV_PERFORMANCE is not set # CONFIG_DEVFREQ_GOV_POWERSAVE is not set # CONFIG_DEVFREQ_GOV_USERSPACE is not set # CONFIG_DEVFREQ_GOV_PASSIVE is not set # # DEVFREQ Drivers # # CONFIG_PM_DEVFREQ_EVENT is not set # CONFIG_EXTCON is not set CONFIG_MEMORY=y # CONFIG_IIO is not set # CONFIG_PWM is not set # # IRQ chip support # CONFIG_ARM_GIC_MAX_NR=1 # CONFIG_IPACK_BUS is not set # CONFIG_RESET_CONTROLLER is not set # CONFIG_FMC is not set # # PHY Subsystem # CONFIG_GENERIC_PHY=y # CONFIG_BCM_KONA_USB2_PHY is not set # CONFIG_PHY_PXA_28NM_HSIC is not set # CONFIG_PHY_PXA_28NM_USB2 is not set # CONFIG_POWERCAP is not set # CONFIG_MCB is not set # # Performance monitor support # # CONFIG_RAS is not set # # Android # # CONFIG_ANDROID is not set # CONFIG_LIBNVDIMM is not set # CONFIG_DAX is not set CONFIG_NVMEM=y # # HW tracing support # # CONFIG_STM is not set # CONFIG_INTEL_TH is not set # CONFIG_FPGA is not set CONFIG_PM_OPP=y # CONFIG_SIOX is not set # CONFIG_SLIMBUS is not set # # File systems # CONFIG_FS_IOMAP=y # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set CONFIG_EXT4_FS=m CONFIG_EXT4_USE_FOR_EXT2=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y # CONFIG_EXT4_ENCRYPTION is not set # CONFIG_EXT4_DEBUG is not set CONFIG_JBD2=m # CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_XFS_FS is not set CONFIG_GFS2_FS=m CONFIG_BTRFS_FS=m CONFIG_BTRFS_FS_POSIX_ACL=y # CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set # CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set # CONFIG_BTRFS_DEBUG is not set # CONFIG_BTRFS_ASSERT is not set # CONFIG_BTRFS_FS_REF_VERIFY is not set # CONFIG_NILFS2_FS is not set CONFIG_F2FS_FS=m CONFIG_F2FS_STAT_FS=y CONFIG_F2FS_FS_XATTR=y CONFIG_F2FS_FS_POSIX_ACL=y CONFIG_F2FS_FS_SECURITY=y # CONFIG_F2FS_CHECK_FS is not set # CONFIG_F2FS_FS_ENCRYPTION is not set # CONFIG_F2FS_FAULT_INJECTION is not set # CONFIG_FS_DAX is not set CONFIG_FS_POSIX_ACL=y CONFIG_EXPORTFS=y # CONFIG_EXPORTFS_BLOCK_OPS is not set CONFIG_FILE_LOCKING=y CONFIG_MANDATORY_FILE_LOCKING=y # CONFIG_FS_ENCRYPTION is not set CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_FANOTIFY=y CONFIG_QUOTA=y # CONFIG_PRINT_QUOTA_WARNING is not set # CONFIG_QUOTA_DEBUG is not set CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set CONFIG_QFMT_V2=m CONFIG_QUOTACTL=y CONFIG_AUTOFS4_FS=m CONFIG_AUTOFS_FS=m CONFIG_FUSE_FS=m CONFIG_CUSE=m # CONFIG_OVERLAY_FS is not set # # Caches # CONFIG_FSCACHE=m CONFIG_FSCACHE_STATS=y # CONFIG_FSCACHE_HISTOGRAM is not set # CONFIG_FSCACHE_DEBUG is not set # CONFIG_FSCACHE_OBJECT_LIST is not set CONFIG_CACHEFILES=m # CONFIG_CACHEFILES_DEBUG is not set # CONFIG_CACHEFILES_HISTOGRAM is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="utf8" # CONFIG_FAT_DEFAULT_UTF8 is not set # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_PROC_CHILDREN=y CONFIG_KERNFS=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_TMPFS_XATTR=y CONFIG_MEMFD_CREATE=y CONFIG_CONFIGFS_FS=m CONFIG_MISC_FILESYSTEMS=y # CONFIG_ORANGEFS_FS is not set # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=y CONFIG_CRAMFS_BLOCKDEV=y CONFIG_SQUASHFS=m CONFIG_SQUASHFS_FILE_CACHE=y # CONFIG_SQUASHFS_FILE_DIRECT is not set CONFIG_SQUASHFS_DECOMP_SINGLE=y # CONFIG_SQUASHFS_DECOMP_MULTI is not set # CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set CONFIG_SQUASHFS_XATTR=y CONFIG_SQUASHFS_ZLIB=y # CONFIG_SQUASHFS_LZ4 is not set CONFIG_SQUASHFS_LZO=y CONFIG_SQUASHFS_XZ=y # CONFIG_SQUASHFS_ZSTD is not set # CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set # CONFIG_SQUASHFS_EMBEDDED is not set CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_QNX6FS_FS is not set CONFIG_ROMFS_FS=m CONFIG_ROMFS_BACKED_BY_BLOCK=y CONFIG_ROMFS_ON_BLOCK=y # CONFIG_PSTORE is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # CONFIG_EXOFS_FS is not set CONFIG_NLS=m CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_737=m CONFIG_NLS_CODEPAGE_775=m CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_CODEPAGE_852=m CONFIG_NLS_CODEPAGE_855=m CONFIG_NLS_CODEPAGE_857=m CONFIG_NLS_CODEPAGE_860=m CONFIG_NLS_CODEPAGE_861=m CONFIG_NLS_CODEPAGE_862=m CONFIG_NLS_CODEPAGE_863=m CONFIG_NLS_CODEPAGE_864=m CONFIG_NLS_CODEPAGE_865=m CONFIG_NLS_CODEPAGE_866=m CONFIG_NLS_CODEPAGE_869=m CONFIG_NLS_CODEPAGE_936=m CONFIG_NLS_CODEPAGE_950=m CONFIG_NLS_CODEPAGE_932=m CONFIG_NLS_CODEPAGE_949=m CONFIG_NLS_CODEPAGE_874=m CONFIG_NLS_ISO8859_8=m CONFIG_NLS_CODEPAGE_1250=m CONFIG_NLS_CODEPAGE_1251=m CONFIG_NLS_ASCII=m CONFIG_NLS_ISO8859_1=m CONFIG_NLS_ISO8859_2=m CONFIG_NLS_ISO8859_3=m CONFIG_NLS_ISO8859_4=m CONFIG_NLS_ISO8859_5=m CONFIG_NLS_ISO8859_6=m CONFIG_NLS_ISO8859_7=m CONFIG_NLS_ISO8859_9=m CONFIG_NLS_ISO8859_13=m CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_MAC_ROMAN=m CONFIG_NLS_MAC_CELTIC=m CONFIG_NLS_MAC_CENTEURO=m CONFIG_NLS_MAC_CROATIAN=m CONFIG_NLS_MAC_CYRILLIC=m CONFIG_NLS_MAC_GAELIC=m CONFIG_NLS_MAC_GREEK=m CONFIG_NLS_MAC_ICELAND=m CONFIG_NLS_MAC_INUIT=m CONFIG_NLS_MAC_ROMANIAN=m CONFIG_NLS_MAC_TURKISH=m CONFIG_NLS_UTF8=m # # Kernel hacking # # # printk and dmesg options # CONFIG_PRINTK_TIME=y CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 CONFIG_BOOT_PRINTK_DELAY=y CONFIG_DYNAMIC_DEBUG=y # # Compile-time checks and compiler options # CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_INFO_REDUCED is not set # CONFIG_DEBUG_INFO_SPLIT is not set # CONFIG_DEBUG_INFO_DWARF4 is not set # CONFIG_GDB_SCRIPTS is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=2048 CONFIG_STRIP_ASM_SYMS=y # CONFIG_READABLE_ASM is not set CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_SECTION_MISMATCH is not set CONFIG_SECTION_MISMATCH_WARN_ONLY=y # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set CONFIG_MAGIC_SYSRQ=y CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x01b6 CONFIG_MAGIC_SYSRQ_SERIAL=y CONFIG_DEBUG_KERNEL=y # # Memory Debugging # # CONFIG_PAGE_EXTENSION is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_PAGE_POISONING is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_VM is not set CONFIG_DEBUG_MEMORY_INIT=y CONFIG_CC_HAS_SANCOV_TRACE_PC=y # CONFIG_DEBUG_SHIRQ is not set # # Debug Lockups and Hangs # # CONFIG_SOFTLOCKUP_DETECTOR is not set CONFIG_DETECT_HUNG_TASK=y CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_WQ_WATCHDOG is not set # CONFIG_PANIC_ON_OOPS is not set CONFIG_PANIC_ON_OOPS_VALUE=0 CONFIG_PANIC_TIMEOUT=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_SCHED_STACK_END_CHECK is not set # CONFIG_DEBUG_TIMEKEEPING is not set # # Lock Debugging (spinlocks, mutexes, etc...) # # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_ATOMIC_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_LOCK_TORTURE_TEST is not set # CONFIG_WW_MUTEX_SELFTEST is not set # CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_PI_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_DEBUG_CREDENTIALS is not set # # RCU Debugging # # CONFIG_RCU_PERF_TEST is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_TRACE is not set # CONFIG_RCU_EQS_DEBUG is not set # CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_NOTIFIER_ERROR_INJECTION is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_DMA_API_DEBUG is not set CONFIG_RUNTIME_TESTING_MENU=y # CONFIG_LKDTM is not set # CONFIG_TEST_LIST_SORT is not set # CONFIG_TEST_SORT is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_RBTREE_TEST is not set # CONFIG_INTERVAL_TREE_TEST is not set # CONFIG_PERCPU_TEST is not set # CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_TEST_HEXDUMP is not set # CONFIG_TEST_STRING_HELPERS is not set # CONFIG_TEST_KSTRTOX is not set # CONFIG_TEST_PRINTF is not set # CONFIG_TEST_BITMAP is not set # CONFIG_TEST_UUID is not set # CONFIG_TEST_OVERFLOW is not set # CONFIG_TEST_RHASHTABLE is not set # CONFIG_TEST_HASH is not set # CONFIG_TEST_LKM is not set # CONFIG_TEST_USER_COPY is not set # CONFIG_FIND_BIT_BENCHMARK is not set # CONFIG_TEST_FIRMWARE is not set # CONFIG_TEST_SYSCTL is not set # CONFIG_TEST_UDELAY is not set # CONFIG_TEST_STATIC_KEYS is not set # CONFIG_BUG_ON_DATA_CORRUPTION is not set # CONFIG_SAMPLES is not set # CONFIG_UBSAN is not set CONFIG_EARLY_PRINTK=y CONFIG_ALPHA_LEGACY_START_ADDRESS=y # CONFIG_MATHEMU is not set # # Security options # CONFIG_KEYS=y # CONFIG_PERSISTENT_KEYRINGS is not set # CONFIG_BIG_KEYS is not set # CONFIG_TRUSTED_KEYS is not set # CONFIG_ENCRYPTED_KEYS is not set # CONFIG_KEY_DH_OPERATIONS is not set # CONFIG_SECURITY_DMESG_RESTRICT is not set # CONFIG_SECURITY is not set CONFIG_SECURITYFS=y CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y # CONFIG_HARDENED_USERCOPY is not set # CONFIG_STATIC_USERMODEHELPER is not set CONFIG_DEFAULT_SECURITY_DAC=y CONFIG_DEFAULT_SECURITY="" CONFIG_XOR_BLOCKS=m CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=m CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=m CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_RNG_DEFAULT=m CONFIG_CRYPTO_AKCIPHER2=y CONFIG_CRYPTO_AKCIPHER=m CONFIG_CRYPTO_KPP2=y CONFIG_CRYPTO_KPP=m CONFIG_CRYPTO_ACOMP2=y CONFIG_CRYPTO_RSA=m # CONFIG_CRYPTO_DH is not set CONFIG_CRYPTO_ECDH=m CONFIG_CRYPTO_MANAGER=m CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_NULL2=y CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m # CONFIG_CRYPTO_MCRYPTD is not set CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m # # Authenticated Encryption with Associated Data # CONFIG_CRYPTO_CCM=m CONFIG_CRYPTO_GCM=m # CONFIG_CRYPTO_CHACHA20POLY1305 is not set # CONFIG_CRYPTO_AEGIS128 is not set # CONFIG_CRYPTO_AEGIS128L is not set # CONFIG_CRYPTO_AEGIS256 is not set # CONFIG_CRYPTO_MORUS640 is not set # CONFIG_CRYPTO_MORUS1280 is not set CONFIG_CRYPTO_SEQIV=m CONFIG_CRYPTO_ECHAINIV=m # # Block modes # CONFIG_CRYPTO_CBC=m # CONFIG_CRYPTO_CFB is not set CONFIG_CRYPTO_CTR=m CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m # CONFIG_CRYPTO_KEYWRAP is not set # # Hash modes # CONFIG_CRYPTO_CMAC=m CONFIG_CRYPTO_HMAC=m CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_VMAC=m # # Digest # CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_CRC32=m CONFIG_CRYPTO_CRCT10DIF=y CONFIG_CRYPTO_GHASH=m # CONFIG_CRYPTO_POLY1305 is not set CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m # CONFIG_CRYPTO_SHA3 is not set # CONFIG_CRYPTO_SM3 is not set CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m # # Ciphers # CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_AES_TI is not set CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_BLOWFISH_COMMON=m CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAST_COMMON=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SALSA20=m # CONFIG_CRYPTO_CHACHA20 is not set CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m # CONFIG_CRYPTO_SM4 is not set # CONFIG_CRYPTO_SPECK is not set CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_TWOFISH_COMMON=m # # Compression # CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_LZO=y # CONFIG_CRYPTO_842 is not set CONFIG_CRYPTO_LZ4=m CONFIG_CRYPTO_LZ4HC=m # CONFIG_CRYPTO_ZSTD is not set # # Random Number Generation # CONFIG_CRYPTO_ANSI_CPRNG=m CONFIG_CRYPTO_DRBG_MENU=m CONFIG_CRYPTO_DRBG_HMAC=y # CONFIG_CRYPTO_DRBG_HASH is not set # CONFIG_CRYPTO_DRBG_CTR is not set CONFIG_CRYPTO_DRBG=m CONFIG_CRYPTO_JITTERENTROPY=m CONFIG_CRYPTO_HASH_INFO=y # CONFIG_CRYPTO_HW is not set # CONFIG_ASYMMETRIC_KEY_TYPE is not set # # Certificates for signature checking # # CONFIG_SYSTEM_BLACKLIST_KEYRING is not set # # Library routines # CONFIG_RAID6_PQ=m CONFIG_BITREVERSE=y CONFIG_GENERIC_STRNCPY_FROM_USER=y CONFIG_GENERIC_STRNLEN_USER=y CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC32_SELFTEST is not set CONFIG_CRC32_SLICEBY8=y # CONFIG_CRC32_SLICEBY4 is not set # CONFIG_CRC32_SARWATE is not set # CONFIG_CRC32_BIT is not set # CONFIG_CRC4 is not set CONFIG_CRC7=m CONFIG_LIBCRC32C=m # CONFIG_CRC8 is not set CONFIG_XXHASH=m # CONFIG_RANDOM32_SELFTEST is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y CONFIG_LZ4_COMPRESS=m CONFIG_LZ4HC_COMPRESS=m CONFIG_LZ4_DECOMPRESS=y CONFIG_ZSTD_COMPRESS=m CONFIG_ZSTD_DECOMPRESS=m CONFIG_XZ_DEC=y # CONFIG_XZ_DEC_X86 is not set # CONFIG_XZ_DEC_POWERPC is not set # CONFIG_XZ_DEC_IA64 is not set # CONFIG_XZ_DEC_ARM is not set # CONFIG_XZ_DEC_ARMTHUMB is not set # CONFIG_XZ_DEC_SPARC is not set # CONFIG_XZ_DEC_TEST is not set CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y CONFIG_DECOMPRESS_XZ=y CONFIG_DECOMPRESS_LZO=y CONFIG_DECOMPRESS_LZ4=y CONFIG_ASSOCIATIVE_ARRAY=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT_MAP=y CONFIG_HAS_DMA=y CONFIG_NEED_SG_DMA_LENGTH=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_ARCH_DMA_ADDR_T_64BIT=y CONFIG_DMA_DIRECT_OPS=y CONFIG_SGL_ALLOC=y CONFIG_GLOB=y # CONFIG_GLOB_SELFTEST is not set CONFIG_CLZ_TAB=y CONFIG_CORDIC=m # CONFIG_DDR is not set # CONFIG_IRQ_POLL is not set CONFIG_MPILIB=m CONFIG_FONT_SUPPORT=m # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_SG_POOL=y CONFIG_SBITMAP=y # CONFIG_STRING_SELFTEST is not set
On Sat, Sep 18, 2021 at 1:26 PM Ulrich Teichert <krypton@ulrich-teichert.org> wrote: > > > > > (I forget which alpha I had. For some reason I want to think I had an > > EISA machine and probably Jensen. Maybe upgraded to a 164 later?) > > Well, as this was way back in 1995, it was perhaps a Multia? Also > named UDB, a small "booksize" model. No, that came later. I had one of the very original ones. I'm pretty sure it was that Jensen platform, but I'm too lazy to go back and look. > > Can you send me your Jensen config? > > Sure, attached here. I don't know if it helps - I can't tell you why I > used 4.18-rc5 for it, that was in 2018... Oh man, I am spending too much > time at work... I ended up hacking something up which was enough to show the build problems, and then some. But your config shows _other_ errors with the IO functions, so I guess I'll need to look at that one too. There's clearly a reason that Jensen was marked BROKEN in the Kconfig, the whole situation with the IO accessor functions on that platform is a disaster. Linus
On Sat, Sep 18, 2021 at 1:46 PM Linus Torvalds <torvalds@linux-foundation.org> wrote: > > But your config shows _other_ errors with the IO functions, so I guess > I'll need to look at that one too. Oh, and all those games with #define __EXTERN_INLINE #include <asm/io.h> #include <asm/jensen.h> #undef __EXTERN_INLINE don't actually work, because there's the usual multiple-inclusion protection on top of asm/jensen.h: #ifndef __ALPHA_JENSEN_H #define __ALPHA_JENSEN_H and this include of <asm/jensen.h> is entirely unused, because we ended up getting the one *without* that empty __EXTERN_INLINE #define from an earlier include of #include <linux/interrupt.h> that caused asm/io.h and asm/jensen.h to be included earlier. The *other* machine files know to do their includes at the top of the file. But then I end up getting ERROR: modpost: "__udiv_qrnnd" [lib/mpi/mpi.ko] undefined! because CONFIG_MATHEMU wasn't set and the crypto stuff wants the MPI code. So there seems to be other alpha Kconfig issues in there, and they aren't all actually Jensen-specific. Oh well. I guess can fix things up, since I did get tthe cross-compiler environment.. Linus
On Sat, Sep 18, 2021 at 1:26 PM Ulrich Teichert <krypton@ulrich-teichert.org> wrote: > > I was just tinkering with it to get it compiled without warning, > I certainly didn't get the big picture :-/ Ok, you shamed me into some tinkering too, and I fixed a couple of issues with the alpha build. The whole "pci_iounmap()" mess is not something I solved (you were cc'd on the email I sent out about that), but I did test a few different Jensen configurations and fixed a couple of uglies. So at least _some_ Jensen configurations build cleanly once more, and I re-enabled JENSEN as a valid machine target. But if it doesn't boot, it's all fairly moot. And those things are a pain to debug, and if the last booting kernel was years and years ago, I don't think it realistically will necessarily ever be fixed. Oh well. I have an odd love-hate relationship with alpha. I think it's one of the worst architectures ever designed (memory ordering is completely broken, and the lack of byte operations in the original specs were a big reason for the initial problems and eventual failure). But at the same time, I really did enjoy it back in the day, and it _was_ the first port I did, and the first truly integrated kernel architecture (the original Linux m68k port that preceded it was a "hack up and replace" job rather than "integrate") Linus
On Sun, Sep 19, 2021 at 8:01 AM Linus Torvalds <torvalds@linux-foundation.org> wrote: > > > Oh well. I have an odd love-hate relationship with alpha. > > I think it's one of the worst architectures ever designed (memory > ordering is completely broken, and the lack of byte operations in the > original specs were a big reason for the initial problems and eventual > failure). > > But at the same time, I really did enjoy it back in the day, and it > _was_ the first port I did, and the first truly integrated kernel > architecture (the original Linux m68k port that preceded it was a > "hack up and replace" job rather than "integrate") As a side note, I loved the Alpha, too. Compared to the VMS port I was too often working on in the 90s, having Linux run on it was a joy, and for years I used my remaining older alpha boxes as firewalls, trusting in the oddity of the architecture to resist various and sundry attacks. I retired the last one well over a decade back. RIP. > > Linus -- Fixing Starlink's Latencies: https://www.youtube.com/watch?v=c9gLo6Xrwgw Dave Täht CEO, TekLibre, LLC
Hi, [sorry for the late answer, I was sick yesterday with digestive system trouble, but nothing serious, just painful....] > On Sat, Sep 18, 2021 at 1:26 PM Ulrich Teichert > <krypton@ulrich-teichert.org> wrote: > > > > I was just tinkering with it to get it compiled without warning, > > I certainly didn't get the big picture :-/ > > Ok, you shamed me into some tinkering too, and I fixed a couple of > issues with the alpha build. > > The whole "pci_iounmap()" mess is not something I solved (you were > cc'd on the email I sent out about that), but I did test a few > different Jensen configurations and fixed a couple of uglies. > > So at least _some_ Jensen configurations build cleanly once more, and > I re-enabled JENSEN as a valid machine target. Yes, I was able to build a minimal Jensen config without any warning after pulling today, thanks! I think investing a bit in cleaning up non-PCI configurations may help as soon as PCIe will be obsoleted by the next bus system ;-) > But if it doesn't boot, it's all fairly moot. And those things are a > pain to debug, and if the last booting kernel was years and years ago, > I don't think it realistically will necessarily ever be fixed. The main trouble is that my system has only 64MB of memory and the smallest kernel image with all drivers I need was about 105MB big. According to: http://users.bart.nl/~geerten/FAQ-9.html the Jensen can take up to 128MB of RAM and the required PS/2 SIMMs with partity are still available on ebay, so I just bought 4x32 MB SIMMs. After setting CONFIG_CC_OPTIMIZE_FOR_SIZE the kernel image was still 93MB big, but with 128MB I should be able to boot it. Let's see.... > Oh well. I have an odd love-hate relationship with alpha. > > I think it's one of the worst architectures ever designed (memory > ordering is completely broken, and the lack of byte operations in the > original specs were a big reason for the initial problems and eventual > failure). I didn't had the money for an Alpha at that time, but as soon as cheap systems were available on ebay, I took the opportunity. At the time I bought them, I considered the Miatas (the "Personal Workstations" from DEC) as quite fast - that must have been around 2004/2006. > But at the same time, I really did enjoy it back in the day, and it > _was_ the first port I did, and the first truly integrated kernel > architecture (the original Linux m68k port that preceded it was a > "hack up and replace" job rather than "integrate") My experience is that each port is good for code quality, but I can only state that for user space applications, not having done much kernel work, CU, Uli -- Dipl. Inf. Ulrich Teichert|e-mail: Ulrich.Teichert@gmx.de | Listening to: Stormweg 24 |Eat Lipstick: Dirty Little Secret, The Baboon Show: 24539 Neumuenster, Germany|Work Work Work, The Bellrays: Bad Reaction
On Mon, Sep 20, 2021 at 11:26 AM Ulrich Teichert <krypton@ulrich-teichert.org> wrote: > > The main trouble is that my system has only 64MB of memory and the smallest > kernel image with all drivers I need was about 105MB big. Are you sure you aren't looking at some debug image? I just tried building something based on your Jensen config (lots of new questions, you sent your old config from 4.18.0-rc5 time), and I get [torvalds@ryzen linux]$ ll -h arch/alpha/boot/vmlinux* -rwxr-xr-x. 1 torvalds torvalds 5.4M Sep 20 11:32 arch/alpha/boot/vmlinux -rw-r--r--. 1 torvalds torvalds 2.3M Sep 20 11:32 arch/alpha/boot/vmlinux.gz so yeah, it's not exactly tiny, but at 5.4MB it's certainly not 105MB. The "vmlinux" file itself is huge, but that's due to CONFIG_DEBUG_INFO=y. You can easily disable DEBUG_INFO entirely (or at least do DEBUG_INFO_REDUCED), and get much smaller files. With the attached config, the vmlinux file is just 7MB (but the actual one you boot is that same 5.4M file because it's been stripped). NOTE! The attached config is basically just the one you sent me, with "make defconfig" done and DEBUG_INFO removed. It might have drivers missing, or extraneous code that you don't need because of all the changes in config variables since that very old one. It would be very interesting to hear whether this all still boots. I do think people still occasionally boot-test some other alpha configurations, but maybe not. Linus
On Mon, Sep 20, 2021 at 11:46 AM Linus Torvalds <torvalds@linux-foundation.org> wrote: > > On Mon, Sep 20, 2021 at 11:26 AM Ulrich Teichert > <krypton@ulrich-teichert.org> wrote: > > > > The main trouble is that my system has only 64MB of memory and the smallest > > kernel image with all drivers I need was about 105MB big. > > Are you sure you aren't looking at some debug image? > > I just tried building something based on your Jensen config (lots of > new questions, you sent your old config from 4.18.0-rc5 time), and I > get > > [torvalds@ryzen linux]$ ll -h arch/alpha/boot/vmlinux* > -rwxr-xr-x. 1 torvalds torvalds 5.4M Sep 20 11:32 arch/alpha/boot/vmlinux > -rw-r--r--. 1 torvalds torvalds 2.3M Sep 20 11:32 arch/alpha/boot/vmlinux.gz > > so yeah, it's not exactly tiny, but at 5.4MB it's certainly not 105MB. > > The "vmlinux" file itself is huge, but that's due to CONFIG_DEBUG_INFO=y. > > You can easily disable DEBUG_INFO entirely (or at least do > DEBUG_INFO_REDUCED), and get much smaller files. > > With the attached config, the vmlinux file is just 7MB (but the actual > one you boot is that same 5.4M file because it's been stripped). > > NOTE! The attached config is basically just the one you sent me, with > "make defconfig" done and DEBUG_INFO removed. It might have drivers > missing, or extraneous code that you don't need because of all the > changes in config variables since that very old one. > > It would be very interesting to hear whether this all still boots. I > do think people still occasionally boot-test some other alpha > configurations, but maybe not. I test on a couple of alpha configurations with some regularity: Marvel (AlphaServer ES47) and Nautilus (UP1500). I have more systems I could test but I'd need to get a lot more organized to make space. In the decade plus I've been around Linux on alpha I've don't actually recall hearing of anyone using Linux on a Jensen system before :)
On Mon, Sep 20, 2021 at 11:59 AM Matt Turner <mattst88@gmail.com> wrote: > > In the decade plus I've been around Linux on alpha I've don't actually > recall hearing of anyone using Linux on a Jensen system before :) Looking around, I'm pretty sure the system I did all my initial work on was a Jensen. This is from the linux-.1.1.83 patch: - * I don't have any good documentation on the EISA hardware interrupt - * stuff: I don't know the mapping between the interrupt vector and the - * EISA interrupt number. - * - * It *seems* to be 0x8X0 for EISA interrupt X, and 0x9X0 for the - * local motherboard interrupts.. + * The vector is 0x8X0 for EISA interrupt X, and 0x9X0 for the local + * motherboard interrupts.. This is for the Jensen. So yup, my initial bringup machine was that DECpc AXP 150, aka "Jensen". The IO subsystem on that thing was absolutely horrendous. Largely because of the lack of byte/word accesses, so doing any PCI accesses had to be encoded on the address bus. Nasty nasty nasty. The original design with only 32-bit and 64-bit memory accesses really was horribly horribly wrong, and all the arguments for it were garbage. Even outside of IO issues, it blew up code size enormously, but the IO side became truly horrendous. Oh well. Water under the bridge. I did have another alpha at some point - going from the original 150HMz EV4 to a 275MHz EV45. I forget what system that was. Linus
Hi, [del] > > The main trouble is that my system has only 64MB of memory and the smallest > > kernel image with all drivers I need was about 105MB big. > > Are you sure you aren't looking at some debug image? > > I just tried building something based on your Jensen config (lots of > new questions, you sent your old config from 4.18.0-rc5 time), and I > get > > [torvalds@ryzen linux]$ ll -h arch/alpha/boot/vmlinux* > -rwxr-xr-x. 1 torvalds torvalds 5.4M Sep 20 11:32 arch/alpha/boot/vmlinux > -rw-r--r--. 1 torvalds torvalds 2.3M Sep 20 11:32 arch/alpha/boot/vmlinux.gz > > so yeah, it's not exactly tiny, but at 5.4MB it's certainly not 105MB. Right, I had DEBUG_INFO set. Stupid me. Now it looks much better: valdese:~/soft/linux/kernel-git> ls -lh arch/alpha/boot/vmlinux* -rwxr-xr-x 1 ut ut 6.4M Sep 21 18:12 arch/alpha/boot/vmlinux* -rw-r--r-- 1 ut ut 3.0M Sep 21 18:12 arch/alpha/boot/vmlinux.gz But it still dies before the first message from the kernel shows up. [del] > It would be very interesting to hear whether this all still boots. I > do think people still occasionally boot-test some other alpha > configurations, but maybe not. I'm sure that other Alpha configurations are still working, but the Jensen is a bit special. So far I know it's the only Alpha which needs aboot and not milo as second stage bootloader. aboot itself seems to be OK, as I can boot the ancient kernel just fine, but when I'm trying to boot other kernels, I'm coming as far as: aboot: loading compressed vmlinux-5-15-rc2 and that's it. I don't think I have to do something special with the compressed image and according to https://tldp.org/HOWTO/SRM-HOWTO/aboot.html I don't have to. But why do I have the feeling I am doing something fundamentally wrong? Was there something with a different kernel jumping in point or a special build option? I remember something like that, but can't grasp it nor find it on the web. I would try the SRM bootimage (make bootimage), but the build is broken: valdese:~/soft/linux/kernel-git> make -j8 ARCH=alpha CROSS_COMPILE=alpha-linux- bootimage ... SYSMAP System.map AS arch/alpha/boot/head.o CC arch/alpha/boot/stdio.o HOSTCC arch/alpha/boot/tools/objstrip arch/alpha/boot/stdio.c: In function ‘vsprintf’: arch/alpha/boot/stdio.c:249:10: warning: this statement may fall through [-Wimplicit-fallthrough=] flags |= LARGE; ^ arch/alpha/boot/stdio.c:250:3: note: here case 'x': ^~~~ arch/alpha/boot/tools/objstrip.c: In function ‘main’: arch/alpha/boot/tools/objstrip.c:151:36: warning: implicit declaration of function ‘str_has_prefix’ [-Wimplicit-function-declaration] if (elf->e_ident[0] == 0x7f && str_has_prefix((char *)elf->e_ident + 1, "ELF")) { ^~~~~~~~~~~~~~ arch/alpha/boot/tools/objstrip.c:191:52: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 5 has type ‘long long unsigned int’ [-Wformat=] fprintf(stderr, "%s: extracting %#016lx-%#016lx (at %lx)\n", ^ arch/alpha/boot/tools/objstrip.c:200:12: error: ‘struct exec’ has no member named ‘fh’ if (!(aout->fh.f_flags & COFF_F_EXEC)) { ^~ arch/alpha/boot/tools/objstrip.c:206:10: error: ‘struct exec’ has no member named ‘fh’ if (aout->fh.f_opthdr != sizeof(aout->ah)) { ^~ arch/alpha/boot/tools/objstrip.c:206:38: error: ‘struct exec’ has no member named ‘ah’ if (aout->fh.f_opthdr != sizeof(aout->ah)) { ^~ arch/alpha/boot/tools/objstrip.c:218:17: error: ‘struct exec’ has no member named ‘ah’ fil_size = aout->ah.tsize + aout->ah.dsize; ^~ arch/alpha/boot/tools/objstrip.c:218:34: error: ‘struct exec’ has no member named ‘ah’ fil_size = aout->ah.tsize + aout->ah.dsize; ^~ arch/alpha/boot/tools/objstrip.c:219:28: error: ‘struct exec’ has no member named ‘ah’ mem_size = fil_size + aout->ah.bsize; ^~ arch/alpha/boot/tools/objstrip.c:223:22: error: ‘struct exec’ has no member named ‘ah’ prog_name, aout->ah.text_start, ^~ arch/alpha/boot/tools/objstrip.c:224:11: error: ‘struct exec’ has no member named ‘ah’ aout->ah.text_start + fil_size, offset); ^~ scripts/Makefile.host:95: recipe for target 'arch/alpha/boot/tools/objstrip' failed Was that the target used to get bootable CDROMs? Could that be broken since the move from aout to ELF? Ugh, sorry for raising so much trouble, CU, Uli -- Dipl. Inf. Ulrich Teichert|e-mail: Ulrich.Teichert@gmx.de | Listening to: Stormweg 24 |Eat Lipstick: Dirty Little Secret, The Baboon Show: 24539 Neumuenster, Germany|Work Work Work, The Bellrays: Bad Reaction
On Tue, Sep 21, 2021 at 12:14 PM Ulrich Teichert <krypton@ulrich-teichert.org> wrote: > > Right, I had DEBUG_INFO set. Stupid me. Now it looks much better: > > valdese:~/soft/linux/kernel-git> ls -lh arch/alpha/boot/vmlinux* > -rwxr-xr-x 1 ut ut 6.4M Sep 21 18:12 arch/alpha/boot/vmlinux* > -rw-r--r-- 1 ut ut 3.0M Sep 21 18:12 arch/alpha/boot/vmlinux.gz > > But it still dies before the first message from the kernel shows up. Ok. That's a nasty situation to debug, and it's where things like "git bisect" are really useful just to narrow things down. ... which isn't an option here. Too bad. I also assume thete is no virtual environment that looks like a Jensen that would help debug this. Which all makes it a bit nasty to try to even guess at what goes wrong. > I don't think I have to do something special with the > compressed image and according to https://tldp.org/HOWTO/SRM-HOWTO/aboot.html > I don't have to. Yeah, it's more than two decades since I used an alpha, so I'm afraid I can't help outside of the "let's make it compile again" thing. It could easily be that the Jensen required that SRM bootimage, but it's so long ago that I really don't remember at all. > I would try the SRM bootimage (make bootimage), but the build is broken: Well, that looks like something that should be fixed, and that I might look at. > arch/alpha/boot/tools/objstrip.c:191:52: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 5 has type ‘long long unsigned int’ [-Wformat=] > fprintf(stderr, "%s: extracting %#016lx-%#016lx (at %lx)\n", > ^ > arch/alpha/boot/tools/objstrip.c:200:12: error: ‘struct exec’ has no member named ‘fh’ > if (!(aout->fh.f_flags & COFF_F_EXEC)) { This looks like the "make bootimage" thing was never designed to work in a cross-build environment. I think. Because it looks like what happens is that when you cross-compile, it gets the x86-64 'struct exec', and then everything goes sideways. > Was that the target used to get bootable CDROMs? Could that be broken since > the move from aout to ELF? Ugh, sorry for raising so much trouble, No, this is lovely. It would be really nice to get that Jensen target working, if only because of silly historical reasons. I'll see if I can get around to this. Linus
On Tue, Sep 21, 2021 at 12:14 PM Ulrich Teichert <krypton@ulrich-teichert.org> wrote: > > I would try the SRM bootimage (make bootimage), but the build is broken: The attached patch is too ugly for words, and there's no way I will commit anything like this. But it at least builds for and seems to successfully make an alpha bootimage even when cross-compiling on x86-64. So something to test, perhaps.. Linus
Hi, > > I would try the SRM bootimage (make bootimage), but the build is broken: > > The attached patch is too ugly for words, and there's no way I will > commit anything like this. > > But it at least builds for and seems to successfully make an alpha > bootimage even when cross-compiling on x86-64. > > So something to test, perhaps.. Sure, I burned it to a CDROM and booted from that per SRM. The screen went black for a second, then the SRM console came back with: ?05 HLT INSTR PC=00000000.20000014 PSL= 00000000.00000007 I wonder if we would be able to see more on a serial line - I can try that perhaps tomorrow or at the weekend. To find out to what code the PC is pointing to, I would need to understand to what point in memory SRM loads the image into.... But this way, the process of loading the kernel definitely worked - I still don't understand why aboot can load the old kernel but not the new one. I'll have a look at the aboot sources, perhaps there's a certain limit on kernel size? I'm not sure if we can call this progress, CU, Uli -- Dipl. Inf. Ulrich Teichert|e-mail: Ulrich.Teichert@gmx.de | Listening to: Stormweg 24 |Eat Lipstick: Dirty Little Secret, The Baboon Show: 24539 Neumuenster, Germany|Work Work Work, The Bellrays: Bad Reaction
Kernel test builds currently fail for several architectures with error messages such as the following. drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe': ./arch/m68k/include/asm/string.h:72:25: error: '__builtin_memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread] Such warnings may be reported by gcc 11.x for string and memory operations on fixed addresses if gcc's builtin functions are used for those operations. This patch series introduces absolute_pointer() to fix the problem. absolute_pointer() disassociates a pointer from its originating symbol type and context, and thus prevents gcc from making assumptions about pointers passed to memory operations. v2: Drop parisc patch (the problem will be solved differently) alpha: Move setup.h out of uapi Define COMMAND_LINE for alpha as absolute_pointer instead of using absolute_pointer on the define. ---------------------------------------------------------------- Guenter Roeck (4): compiler.h: Introduce absolute_pointer macro net: i825xx: Use absolute_pointer for memcpy from fixed memory location alpha: Move setup.h out of uapi alpha: Use absolute_pointer to define COMMAND_LINE arch/alpha/include/asm/setup.h | 43 +++++++++++++++++++++++++++++++++++++ arch/alpha/include/uapi/asm/setup.h | 42 +++--------------------------------- drivers/net/ethernet/i825xx/82596.c | 2 +- include/linux/compiler.h | 2 ++ 4 files changed, 49 insertions(+), 40 deletions(-) create mode 100644 arch/alpha/include/asm/setup.h