| Message ID | 20210308122020.57071-8-andriy.shevchenko@linux.intel.com |
|---|---|
| State | New |
| Headers | show |
| Series | PCI: introduce p2sb helper | expand |
Hi Andy, On Mon, 8 Mar 2021 14:20:20 +0200, Andy Shevchenko wrote: > Since we have a common P2SB accessor in tree we may use it instead of > open coded variants. > > Replace custom code by pci_p2sb_bar() call. I like the idea. Just two things... > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > --- > drivers/i2c/busses/Kconfig | 1 + > drivers/i2c/busses/i2c-i801.c | 40 ++++++++--------------------------- > drivers/pci/pci-p2sb.c | 6 ++++++ > 3 files changed, 16 insertions(+), 31 deletions(-) > > diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig > index 05ebf7546e3f..ffd3007f888c 100644 > --- a/drivers/i2c/busses/Kconfig > +++ b/drivers/i2c/busses/Kconfig > @@ -101,6 +101,7 @@ config I2C_HIX5HD2 > config I2C_I801 > tristate "Intel 82801 (ICH/PCH)" > depends on PCI > + select PCI_P2SB if X86 > select CHECK_SIGNATURE if X86 && DMI > select I2C_SMBUS > help > diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c > index 4acee6f9e5a3..23b43de9786a 100644 > --- a/drivers/i2c/busses/i2c-i801.c > +++ b/drivers/i2c/busses/i2c-i801.c > @@ -90,6 +90,7 @@ > #include <linux/interrupt.h> > #include <linux/module.h> > #include <linux/pci.h> > +#include <linux/pci-p2sb.h> > #include <linux/kernel.h> > #include <linux/stddef.h> > #include <linux/delay.h> > @@ -136,7 +137,6 @@ > #define TCOBASE 0x050 > #define TCOCTL 0x054 > > -#define SBREG_BAR 0x10 > #define SBREG_SMBCTRL 0xc6000c > #define SBREG_SMBCTRL_DNV 0xcf000c > > @@ -1524,52 +1524,30 @@ static const struct itco_wdt_platform_data spt_tco_platform_data = { > .version = 4, > }; > > -static DEFINE_SPINLOCK(p2sb_spinlock); > - > static struct platform_device * > i801_add_tco_spt(struct i801_priv *priv, struct pci_dev *pci_dev, > struct resource *tco_res) > { > struct resource *res; > unsigned int devfn; > - u64 base64_addr; > - u32 base_addr; > - u8 hidden; > + int ret; > > /* > * We must access the NO_REBOOT bit over the Primary to Sideband > - * bridge (P2SB). The BIOS prevents the P2SB device from being > - * enumerated by the PCI subsystem, so we need to unhide/hide it > - * to lookup the P2SB BAR. > + * bridge (P2SB). > */ > - spin_lock(&p2sb_spinlock); > > devfn = PCI_DEVFN(PCI_SLOT(pci_dev->devfn), 1); > > - /* Unhide the P2SB device, if it is hidden */ > - pci_bus_read_config_byte(pci_dev->bus, devfn, 0xe1, &hidden); > - if (hidden) > - pci_bus_write_config_byte(pci_dev->bus, devfn, 0xe1, 0x0); > - > - pci_bus_read_config_dword(pci_dev->bus, devfn, SBREG_BAR, &base_addr); > - base64_addr = base_addr & 0xfffffff0; > - > - pci_bus_read_config_dword(pci_dev->bus, devfn, SBREG_BAR + 0x4, &base_addr); > - base64_addr |= (u64)base_addr << 32; > - > - /* Hide the P2SB device, if it was hidden before */ > - if (hidden) > - pci_bus_write_config_byte(pci_dev->bus, devfn, 0xe1, hidden); > - spin_unlock(&p2sb_spinlock); > - > res = &tco_res[1]; > + ret = pci_p2sb_bar(pci_dev, devfn, res); > + if (ret) > + return ERR_PTR(ret); > + > if (pci_dev->device == PCI_DEVICE_ID_INTEL_DNV_SMBUS) > - res->start = (resource_size_t)base64_addr + SBREG_SMBCTRL_DNV; > + res->start += SBREG_SMBCTRL_DNV; > else > - res->start = (resource_size_t)base64_addr + SBREG_SMBCTRL; > - > - res->end = res->start + 3; > - res->flags = IORESOURCE_MEM; > + res->start += SBREG_SMBCTRL; I can't see why you no longer set res->end and res->flags here. I can imagine that pci_p2sb_bar() may have set the flags for us, but not that ->end is still correct after you fixed up ->start. Am I missing something? > > return platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1, > tco_res, 2, &spt_tco_platform_data, > diff --git a/drivers/pci/pci-p2sb.c b/drivers/pci/pci-p2sb.c > index 68d7dad48cdb..7f6bc7d4482a 100644 > --- a/drivers/pci/pci-p2sb.c > +++ b/drivers/pci/pci-p2sb.c > @@ -22,6 +22,12 @@ > > static const struct x86_cpu_id p2sb_cpu_ids[] = { > X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT, PCI_DEVFN(13, 0)), > + X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT_D, PCI_DEVFN(31, 1)), > + X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT_D, PCI_DEVFN(31, 1)), > + X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE, PCI_DEVFN(31, 1)), > + X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE_L, PCI_DEVFN(31, 1)), > + X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE, PCI_DEVFN(31, 1)), > + X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_L, PCI_DEVFN(31, 1)), > {} > }; > Any reason why this is added in this patch instead of [3/7] (PCI: New Primary to Sideband (P2SB) bridge support library)? -- Jean Delvare SUSE L3 Support
On Wed, Mar 10, 2021 at 03:51:45PM +0100, Jean Delvare wrote: > On Mon, 8 Mar 2021 14:20:20 +0200, Andy Shevchenko wrote: ... > > - res->end = res->start + 3; > > - res->flags = IORESOURCE_MEM; > > + res->start += SBREG_SMBCTRL; > > I can't see why you no longer set res->end and res->flags here. I can > imagine that pci_p2sb_bar() may have set the flags for us, but not that > ->end is still correct after you fixed up ->start. Am I missing > something? Good catch of the res->end! But flags actually may be MEM64, which the original code doesn't properly handle. ... > > static const struct x86_cpu_id p2sb_cpu_ids[] = { > > X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT, PCI_DEVFN(13, 0)), > > + X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT_D, PCI_DEVFN(31, 1)), > > + X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT_D, PCI_DEVFN(31, 1)), > > + X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE, PCI_DEVFN(31, 1)), > > + X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE_L, PCI_DEVFN(31, 1)), > > + X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE, PCI_DEVFN(31, 1)), > > + X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_L, PCI_DEVFN(31, 1)), > > {} > > }; > > Any reason why this is added in this patch instead of [3/7] (PCI: New > Primary to Sideband (P2SB) bridge support library)? Filling this on demand, no user no entry. I think it's how we assume the code to be applied in the kernel.
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 05ebf7546e3f..ffd3007f888c 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -101,6 +101,7 @@ config I2C_HIX5HD2 config I2C_I801 tristate "Intel 82801 (ICH/PCH)" depends on PCI + select PCI_P2SB if X86 select CHECK_SIGNATURE if X86 && DMI select I2C_SMBUS help diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 4acee6f9e5a3..23b43de9786a 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -90,6 +90,7 @@ #include <linux/interrupt.h> #include <linux/module.h> #include <linux/pci.h> +#include <linux/pci-p2sb.h> #include <linux/kernel.h> #include <linux/stddef.h> #include <linux/delay.h> @@ -136,7 +137,6 @@ #define TCOBASE 0x050 #define TCOCTL 0x054 -#define SBREG_BAR 0x10 #define SBREG_SMBCTRL 0xc6000c #define SBREG_SMBCTRL_DNV 0xcf000c @@ -1524,52 +1524,30 @@ static const struct itco_wdt_platform_data spt_tco_platform_data = { .version = 4, }; -static DEFINE_SPINLOCK(p2sb_spinlock); - static struct platform_device * i801_add_tco_spt(struct i801_priv *priv, struct pci_dev *pci_dev, struct resource *tco_res) { struct resource *res; unsigned int devfn; - u64 base64_addr; - u32 base_addr; - u8 hidden; + int ret; /* * We must access the NO_REBOOT bit over the Primary to Sideband - * bridge (P2SB). The BIOS prevents the P2SB device from being - * enumerated by the PCI subsystem, so we need to unhide/hide it - * to lookup the P2SB BAR. + * bridge (P2SB). */ - spin_lock(&p2sb_spinlock); devfn = PCI_DEVFN(PCI_SLOT(pci_dev->devfn), 1); - /* Unhide the P2SB device, if it is hidden */ - pci_bus_read_config_byte(pci_dev->bus, devfn, 0xe1, &hidden); - if (hidden) - pci_bus_write_config_byte(pci_dev->bus, devfn, 0xe1, 0x0); - - pci_bus_read_config_dword(pci_dev->bus, devfn, SBREG_BAR, &base_addr); - base64_addr = base_addr & 0xfffffff0; - - pci_bus_read_config_dword(pci_dev->bus, devfn, SBREG_BAR + 0x4, &base_addr); - base64_addr |= (u64)base_addr << 32; - - /* Hide the P2SB device, if it was hidden before */ - if (hidden) - pci_bus_write_config_byte(pci_dev->bus, devfn, 0xe1, hidden); - spin_unlock(&p2sb_spinlock); - res = &tco_res[1]; + ret = pci_p2sb_bar(pci_dev, devfn, res); + if (ret) + return ERR_PTR(ret); + if (pci_dev->device == PCI_DEVICE_ID_INTEL_DNV_SMBUS) - res->start = (resource_size_t)base64_addr + SBREG_SMBCTRL_DNV; + res->start += SBREG_SMBCTRL_DNV; else - res->start = (resource_size_t)base64_addr + SBREG_SMBCTRL; - - res->end = res->start + 3; - res->flags = IORESOURCE_MEM; + res->start += SBREG_SMBCTRL; return platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1, tco_res, 2, &spt_tco_platform_data, diff --git a/drivers/pci/pci-p2sb.c b/drivers/pci/pci-p2sb.c index 68d7dad48cdb..7f6bc7d4482a 100644 --- a/drivers/pci/pci-p2sb.c +++ b/drivers/pci/pci-p2sb.c @@ -22,6 +22,12 @@ static const struct x86_cpu_id p2sb_cpu_ids[] = { X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT, PCI_DEVFN(13, 0)), + X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT_D, PCI_DEVFN(31, 1)), + X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT_D, PCI_DEVFN(31, 1)), + X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE, PCI_DEVFN(31, 1)), + X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE_L, PCI_DEVFN(31, 1)), + X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE, PCI_DEVFN(31, 1)), + X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_L, PCI_DEVFN(31, 1)), {} };
Since we have a common P2SB accessor in tree we may use it instead of open coded variants. Replace custom code by pci_p2sb_bar() call. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- drivers/i2c/busses/Kconfig | 1 + drivers/i2c/busses/i2c-i801.c | 40 ++++++++--------------------------- drivers/pci/pci-p2sb.c | 6 ++++++ 3 files changed, 16 insertions(+), 31 deletions(-)