mbox series

[V4,00/11] media: hantro: imx8mq/imx8mm: Let VPU decoders get controlled by vpu-blk-ctrl

Message ID 20220125171129.472775-1-aford173@gmail.com
Headers show
Series media: hantro: imx8mq/imx8mm: Let VPU decoders get controlled by vpu-blk-ctrl | expand

Message

Adam Ford Jan. 25, 2022, 5:11 p.m. UTC 
Both the i.MX8MQ and i.MX8MM have G1 and G2 decoders.
The two decoders are similar, but the imx8mm lacks the
post-processor, so they will have distinct compatible flags.

Comments

Lucas Stach Jan. 25, 2022, 6:22 p.m. UTC | #1 
Am Dienstag, dem 25.01.2022 um 11:11 -0600 schrieb Adam Ford:
> The vpu is enabled by default, so there is no need to manually
> enable it.
> 
> Signed-off-by: Adam Ford <aford173@gmail.com>

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>

> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
> index 8aedcddfeab8..38ffcd145b33 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
> @@ -272,10 +272,6 @@ &usdhc1 {
>  	status = "okay";
>  };
>  
> -&vpu {
> -	status = "okay";
> -};
> -
>  /* Attention: wdog reset forcing POR needs baseboard support */
>  &wdog1 {
>  	status = "okay";
Alexander Stein Jan. 26, 2022, 6:42 a.m. UTC | #2 
Am Dienstag, 25. Januar 2022, 18:11:18 CET schrieb Adam Ford:
> The vpu is enabled by default, so there is no need to manually
> enable it.
> 
> Signed-off-by: Adam Ford <aford173@gmail.com>

Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>

> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
> b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi index
> 8aedcddfeab8..38ffcd145b33 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
> @@ -272,10 +272,6 @@ &usdhc1 {
>  	status = "okay";
>  };
> 
> -&vpu {
> -	status = "okay";
> -};
> -
>  /* Attention: wdog reset forcing POR needs baseboard support */
>  &wdog1 {
>  	status = "okay";