Message ID | 20220412082847.2532584-1-chi.minghao@zte.com.cn |
---|---|
State | New |
Headers | show |
Series | net: ethernet: ti: cpsw: using pm_runtime_resume_and_get instead of pm_runtime_get_sync | expand |
On 12/04/2022 11:28, cgel.zte@gmail.com wrote: > From: Minghao Chi <chi.minghao@zte.com.cn> > > Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and > pm_runtime_put_noidle. This change is just to simplify the code, no > actual functional changes. > > Reported-by: Zeal Robot <zealci@zte.com.cn> > Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> > --- > drivers/net/ethernet/ti/cpsw.c | 36 ++++++++++++---------------------- > 1 file changed, 12 insertions(+), 24 deletions(-) > > diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c > index 03575c017500..9f37b5b196a5 100644 > --- a/drivers/net/ethernet/ti/cpsw.c > +++ b/drivers/net/ethernet/ti/cpsw.c > @@ -756,11 +756,9 @@ static int cpsw_ndo_open(struct net_device *ndev) > int ret; > u32 reg; > > - ret = pm_runtime_get_sync(cpsw->dev); > - if (ret < 0) { > - pm_runtime_put_noidle(cpsw->dev); > + ret = pm_runtime_resume_and_get(cpsw->dev); > + if (ret < 0) > return ret; > - } > > netif_carrier_off(ndev); > > @@ -968,11 +966,9 @@ static int cpsw_ndo_set_mac_address(struct net_device *ndev, void *p) > if (!is_valid_ether_addr(addr->sa_data)) > return -EADDRNOTAVAIL; > > - ret = pm_runtime_get_sync(cpsw->dev); > - if (ret < 0) { > - pm_runtime_put_noidle(cpsw->dev); > + ret = pm_runtime_resume_and_get(cpsw->dev); > + if (ret < 0) > return ret; > - } > > if (cpsw->data.dual_emac) { > vid = cpsw->slaves[priv->emac_port].port_vlan; > @@ -1052,11 +1048,9 @@ static int cpsw_ndo_vlan_rx_add_vid(struct net_device *ndev, > if (vid == cpsw->data.default_vlan) > return 0; > > - ret = pm_runtime_get_sync(cpsw->dev); > - if (ret < 0) { > - pm_runtime_put_noidle(cpsw->dev); > + ret = pm_runtime_resume_and_get(cpsw->dev); > + if (ret < 0) > return ret; > - } > > if (cpsw->data.dual_emac) { > /* In dual EMAC, reserved VLAN id should not be used for > @@ -1090,11 +1084,9 @@ static int cpsw_ndo_vlan_rx_kill_vid(struct net_device *ndev, > if (vid == cpsw->data.default_vlan) > return 0; > > - ret = pm_runtime_get_sync(cpsw->dev); > - if (ret < 0) { > - pm_runtime_put_noidle(cpsw->dev); > + ret = pm_runtime_resume_and_get(cpsw->dev); > + if (ret < 0) > return ret; > - } > > if (cpsw->data.dual_emac) { > int i; > @@ -1567,11 +1559,9 @@ static int cpsw_probe(struct platform_device *pdev) > /* Need to enable clocks with runtime PM api to access module > * registers > */ > - ret = pm_runtime_get_sync(dev); > - if (ret < 0) { > - pm_runtime_put_noidle(dev); > + ret = pm_runtime_resume_and_get(dev); > + if (ret < 0) > goto clean_runtime_disable_ret; > - } > > ret = cpsw_probe_dt(&cpsw->data, pdev); > if (ret) > @@ -1734,11 +1724,9 @@ static int cpsw_remove(struct platform_device *pdev) > struct cpsw_common *cpsw = platform_get_drvdata(pdev); > int i, ret; > > - ret = pm_runtime_get_sync(&pdev->dev); > - if (ret < 0) { > - pm_runtime_put_noidle(&pdev->dev); > + ret = pm_runtime_resume_and_get(&pdev->dev); > + if (ret < 0) > return ret; > - } > > for (i = 0; i < cpsw->data.slaves; i++) > if (cpsw->slaves[i].ndev) Thank you. Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Hello: This patch was applied to netdev/net-next.git (master) by Jakub Kicinski <kuba@kernel.org>: On Tue, 12 Apr 2022 08:28:47 +0000 you wrote: > From: Minghao Chi <chi.minghao@zte.com.cn> > > Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and > pm_runtime_put_noidle. This change is just to simplify the code, no > actual functional changes. > > Reported-by: Zeal Robot <zealci@zte.com.cn> > Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> > > [...] Here is the summary with links: - net: ethernet: ti: cpsw: using pm_runtime_resume_and_get instead of pm_runtime_get_sync https://git.kernel.org/netdev/net-next/c/2e5b3d4cb16e You are awesome, thank you!
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 03575c017500..9f37b5b196a5 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -756,11 +756,9 @@ static int cpsw_ndo_open(struct net_device *ndev) int ret; u32 reg; - ret = pm_runtime_get_sync(cpsw->dev); - if (ret < 0) { - pm_runtime_put_noidle(cpsw->dev); + ret = pm_runtime_resume_and_get(cpsw->dev); + if (ret < 0) return ret; - } netif_carrier_off(ndev); @@ -968,11 +966,9 @@ static int cpsw_ndo_set_mac_address(struct net_device *ndev, void *p) if (!is_valid_ether_addr(addr->sa_data)) return -EADDRNOTAVAIL; - ret = pm_runtime_get_sync(cpsw->dev); - if (ret < 0) { - pm_runtime_put_noidle(cpsw->dev); + ret = pm_runtime_resume_and_get(cpsw->dev); + if (ret < 0) return ret; - } if (cpsw->data.dual_emac) { vid = cpsw->slaves[priv->emac_port].port_vlan; @@ -1052,11 +1048,9 @@ static int cpsw_ndo_vlan_rx_add_vid(struct net_device *ndev, if (vid == cpsw->data.default_vlan) return 0; - ret = pm_runtime_get_sync(cpsw->dev); - if (ret < 0) { - pm_runtime_put_noidle(cpsw->dev); + ret = pm_runtime_resume_and_get(cpsw->dev); + if (ret < 0) return ret; - } if (cpsw->data.dual_emac) { /* In dual EMAC, reserved VLAN id should not be used for @@ -1090,11 +1084,9 @@ static int cpsw_ndo_vlan_rx_kill_vid(struct net_device *ndev, if (vid == cpsw->data.default_vlan) return 0; - ret = pm_runtime_get_sync(cpsw->dev); - if (ret < 0) { - pm_runtime_put_noidle(cpsw->dev); + ret = pm_runtime_resume_and_get(cpsw->dev); + if (ret < 0) return ret; - } if (cpsw->data.dual_emac) { int i; @@ -1567,11 +1559,9 @@ static int cpsw_probe(struct platform_device *pdev) /* Need to enable clocks with runtime PM api to access module * registers */ - ret = pm_runtime_get_sync(dev); - if (ret < 0) { - pm_runtime_put_noidle(dev); + ret = pm_runtime_resume_and_get(dev); + if (ret < 0) goto clean_runtime_disable_ret; - } ret = cpsw_probe_dt(&cpsw->data, pdev); if (ret) @@ -1734,11 +1724,9 @@ static int cpsw_remove(struct platform_device *pdev) struct cpsw_common *cpsw = platform_get_drvdata(pdev); int i, ret; - ret = pm_runtime_get_sync(&pdev->dev); - if (ret < 0) { - pm_runtime_put_noidle(&pdev->dev); + ret = pm_runtime_resume_and_get(&pdev->dev); + if (ret < 0) return ret; - } for (i = 0; i < cpsw->data.slaves; i++) if (cpsw->slaves[i].ndev)