[v5,0/3] Add Richtek RT9471 3A battery charger support

From: ChiYuan Huang <cy_huang@richtek.com>

This patch set is to add Richtek RT9471 charger support.

The RT9471/D is a highly-integrated 3A switch mode battery charge management
and system power path management device for single cell Li-Ion and Li-polymer
battery. The low impedance power path optimizes switch-mode operation
efficiency, reduces battery charging time and extends battery life during
discharging phase.

Since v5:
- Remove one line wrapper.
- Merge header content into source file, remove header file.
- Remove 'charge_term_enable' sysfs entry and merge it into
  'charge_term_current' property control.
- Change MODULE_LICENSE from 'GPL v2' to 'GPL'.
  Following by the below discussion
  https://lore.kernel.org/all/YxAVAt2eWB3NFlrk@google.com/
- Recover all the change in sysfs-class-power.
- New a sysfs-class-power-rt9471 file.
- Remove 'charge_term_enable' sysfs entry, directly integrate it in
  'charge_term_current' power supply property control.

Since v4:
- Remove the line for the owner field in driver.
- Add the documentation for sysfs entries.

Since v3:
- Move unevaluatedProperties line after $ref for binding patch.
- Add Reviewed-by tag for binding patch.

Since v2:
- Remove the properties for interrupt controller things in the binding documentation.
- Fix dtc error for typo, it's 'regulator-name', not 'regulator-compatible'.
- Add regulator min/max microamp to allow otg vbus current adjustable in example.
- Specify the active-level for charge-enable-gpios in binding example.
- Fix checkpatch error about 'foo * bar' to 'foo *bar' in psy_device_to_chip function.
- Specify the member name directly for the use of linear range.

ChiYuan Huang (3):
  dt-bindings: power: supply: Add Richtek RT9471 battery charger
  power: supply: rt9471: Add Richtek RT9471 charger driver
  Documentation: power: rt9471: Document exported sysfs entries

 Documentation/ABI/testing/sysfs-class-power-rt9471 |  29 +
 .../bindings/power/supply/richtek,rt9471.yaml      |  73 ++
 drivers/power/supply/Kconfig                       |  16 +
 drivers/power/supply/Makefile                      |   1 +
 drivers/power/supply/rt9471.c                      | 937 +++++++++++++++++++++
 5 files changed, 1056 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-class-power-rt9471
 create mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt9471.yaml
 create mode 100644 drivers/power/supply/rt9471.c

On Thu, 15 Sep 2022 00:30:13 +0800, cy_huang wrote:
> From: ChiYuan Huang <cy_huang@richtek.com>
> 
> Add bindings for the Richtek RT9471 I2C controlled battery charger.
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Co-developed-by: Alina Yu <alina_yu@richtek.com>
> Signed-off-by: Alina Yu <alina_yu@richtek.com>
> Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
> ---
> Since v3
> - Move unevaluatedProperties line after $ref for binding patch.
> - Add Reviewed-by tag for binding patch.
> 
> Since v2
> - Remove the properties for interrupt controller things in the binding documentation.
> - Fix dtc error for typo, it's 'regulator-name', not 'regulator-compatible'.
> - Add regulator min/max microamp to allow otg vbus current adjustable in example.
> - Specify the active-level for charge-enable-gpios in binding example.
> 
> ---
>  .../bindings/power/supply/richtek,rt9471.yaml      | 73 ++++++++++++++++++++++
>  1 file changed, 73 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt9471.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.example.dtb: dma-router@a0: dma-masters:0: [4294967295, 4294967295] is too long
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.example.dtb: dma-router@a0: dma-masters:0: [4294967295, 4294967295] is too long
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/dma-router.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/st,stm32-dmamux.example.dtb: dma-router@40020800: dma-masters:0: [4294967295, 4294967295] is too long
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/dma-router.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/st,stm32-dmamux.example.dtb: dma-router@40020800: dma-masters:0: [4294967295, 4294967295] is too long
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/st,stm32-dmamux.example.dtb: dma-router@40020800: Unevaluated properties are not allowed ('dma-channels', 'dma-masters', 'dma-requests' were unexpected)
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.

On Thu, Sep 15, 2022 at 10:51:21AM +0100, Krzysztof Kozlowski wrote:
> On Thu, 15 Sep 2022 00:30:13 +0800, cy_huang wrote:
> > From: ChiYuan Huang <cy_huang@richtek.com>
> > 
> > Add bindings for the Richtek RT9471 I2C controlled battery charger.
> > 
> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> > Co-developed-by: Alina Yu <alina_yu@richtek.com>
> > Signed-off-by: Alina Yu <alina_yu@richtek.com>
> > Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
> > ---
> > Since v3
> > - Move unevaluatedProperties line after $ref for binding patch.
> > - Add Reviewed-by tag for binding patch.
> > 
> > Since v2
> > - Remove the properties for interrupt controller things in the binding documentation.
> > - Fix dtc error for typo, it's 'regulator-name', not 'regulator-compatible'.
> > - Add regulator min/max microamp to allow otg vbus current adjustable in example.
> > - Specify the active-level for charge-enable-gpios in binding example.
> > 
> > ---
> >  .../bindings/power/supply/richtek,rt9471.yaml      | 73 ++++++++++++++++++++++
> >  1 file changed, 73 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt9471.yaml
> > 
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.example.dtb: dma-router@a0: dma-masters:0: [4294967295, 4294967295] is too long
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.yaml
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.example.dtb: dma-router@a0: dma-masters:0: [4294967295, 4294967295] is too long
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/dma-router.yaml
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/st,stm32-dmamux.example.dtb: dma-router@40020800: dma-masters:0: [4294967295, 4294967295] is too long
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/dma-router.yaml
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/st,stm32-dmamux.example.dtb: dma-router@40020800: dma-masters:0: [4294967295, 4294967295] is too long
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/st,stm32-dmamux.example.dtb: dma-router@40020800: Unevaluated properties are not allowed ('dma-channels', 'dma-masters', 'dma-requests' were unexpected)
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml

Ignore this. Unrelated.

Rob