| Message ID | 20220923170235.18873-1-quic_adisi@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | wifi: ath11k: stop tx queues immediately upon firmware exit | expand |
Aditya Kumar Singh <quic_adisi@quicinc.com> wrote: > Currently, recovery flag is set immediately upon firmware > exit but tx queues are stopped once firmware arrives back > and is ready which is during ath11k_core_restart. Once > ieee80211 hw restart is completed, tx queues are resumed. > If during the time delta between firmware exit and firmware > ready, mac80211 send packets, currently ath11k will drop it > since recovery flag will be set. But warning prints will > come - > "ath11k c000000.wifi: failed to transmit frame -108" > > If more tx packets are there, this could lead to flooding > of above print. > > However, actually tx queues should be stopped immediately > when firmware leaves. This will prevent packets to get > dropped when firmware is recovering. > > Add fix to stop tx queues immediately after firmware exit. > > Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 > > Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> > Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Patch applied to ath-next branch of ath.git, thanks. 81e60b2dfb27 wifi: ath11k: stop tx queues immediately upon firmware exit
diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c index 9894f908cc35..a50b748473cb 100644 --- a/drivers/net/wireless/ath/ath11k/core.c +++ b/drivers/net/wireless/ath/ath11k/core.c @@ -1634,7 +1634,7 @@ static void ath11k_update_11d(struct work_struct *work) } } -static void ath11k_core_pre_reconfigure_recovery(struct ath11k_base *ab) +void ath11k_core_pre_reconfigure_recovery(struct ath11k_base *ab) { struct ath11k *ar; struct ath11k_pdev *pdev; @@ -1723,9 +1723,6 @@ static void ath11k_core_restart(struct work_struct *work) struct ath11k_base *ab = container_of(work, struct ath11k_base, restart_work); int ret; - if (!ab->is_reset) - ath11k_core_pre_reconfigure_recovery(ab); - ret = ath11k_core_reconfigure_on_crash(ab); if (ret) { ath11k_err(ab, "failed to reconfigure driver on crash recovery\n"); diff --git a/drivers/net/wireless/ath/ath11k/core.h b/drivers/net/wireless/ath/ath11k/core.h index b6246a2f2496..6c950608bb44 100644 --- a/drivers/net/wireless/ath/ath11k/core.h +++ b/drivers/net/wireless/ath/ath11k/core.h @@ -1146,6 +1146,7 @@ int ath11k_core_check_smbios(struct ath11k_base *ab); void ath11k_core_halt(struct ath11k *ar); int ath11k_core_resume(struct ath11k_base *ab); int ath11k_core_suspend(struct ath11k_base *ab); +void ath11k_core_pre_reconfigure_recovery(struct ath11k_base *ab); const struct firmware *ath11k_core_firmware_request(struct ath11k_base *ab, const char *filename); diff --git a/drivers/net/wireless/ath/ath11k/qmi.c b/drivers/net/wireless/ath/ath11k/qmi.c index 51de2208b789..775dfb5eb1a7 100644 --- a/drivers/net/wireless/ath/ath11k/qmi.c +++ b/drivers/net/wireless/ath/ath11k/qmi.c @@ -3158,6 +3158,9 @@ static void ath11k_qmi_driver_event_work(struct work_struct *work) case ATH11K_QMI_EVENT_SERVER_EXIT: set_bit(ATH11K_FLAG_CRASH_FLUSH, &ab->dev_flags); set_bit(ATH11K_FLAG_RECOVERY, &ab->dev_flags); + + if (!ab->is_reset) + ath11k_core_pre_reconfigure_recovery(ab); break; case ATH11K_QMI_EVENT_REQUEST_MEM: ret = ath11k_qmi_event_mem_request(qmi);
Currently, recovery flag is set immediately upon firmware exit but tx queues are stopped once firmware arrives back and is ready which is during ath11k_core_restart. Once ieee80211 hw restart is completed, tx queues are resumed. If during the time delta between firmware exit and firmware ready, mac80211 send packets, currently ath11k will drop it since recovery flag will be set. But warning prints will come - "ath11k c000000.wifi: failed to transmit frame -108" If more tx packets are there, this could lead to flooding of above print. However, actually tx queues should be stopped immediately when firmware leaves. This will prevent packets to get dropped when firmware is recovering. Add fix to stop tx queues immediately after firmware exit. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> --- drivers/net/wireless/ath/ath11k/core.c | 5 +---- drivers/net/wireless/ath/ath11k/core.h | 1 + drivers/net/wireless/ath/ath11k/qmi.c | 3 +++ 3 files changed, 5 insertions(+), 4 deletions(-) base-commit: 67552c0328709b82bbfc4b52f1e83354c2d21561