[10/12] dt-bindings: mediatek: mt8188: add audio afe document

Add mt8188 audio afe document.

Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
---
 .../bindings/sound/mt8188-afe-pcm.yaml        | 202 ++++++++++++++++++
 1 file changed, 202 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/mt8188-afe-pcm.yaml

On Fri, 30 Sep 2022 22:56:59 +0800, Trevor Wu wrote:
> Add mt8188 audio afe document.
> 
> Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
> ---
>  .../bindings/sound/mt8188-afe-pcm.yaml        | 202 ++++++++++++++++++
>  1 file changed, 202 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sound/mt8188-afe-pcm.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/mt8188-afe-pcm.example.dtb: afe@10b10000: clock-names:17: 'adsp_audio26m' was expected
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/mt8188-afe-pcm.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.

On Fri, Sep 30, 2022 at 10:56:59PM +0800, Trevor Wu wrote:
> Add mt8188 audio afe document.
> 
> Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
> ---
>  .../bindings/sound/mt8188-afe-pcm.yaml        | 202 ++++++++++++++++++
>  1 file changed, 202 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sound/mt8188-afe-pcm.yaml
> 
> diff --git a/Documentation/devicetree/bindings/sound/mt8188-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8188-afe-pcm.yaml
> new file mode 100644
> index 000000000000..50d53c5d59ad
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/mt8188-afe-pcm.yaml
> @@ -0,0 +1,202 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/mt8188-afe-pcm.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek AFE PCM controller for mt8188
> +
> +maintainers:
> +  - Trevor Wu <trevor.wu@mediatek.com>
> +
> +properties:
> +  compatible:
> +    const: mediatek,mt8188-audio

If the block is called 'AFE PCM controller', then perhaps use some of 
that for the name instead of just 'audio'.

> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  resets:
> +    maxItems: 1
> +
> +  reset-names:
> +    const: audiosys
> +
> +  memory-region:
> +    maxItems: 1
> +    description: |
> +      Shared memory region for AFE memif.  A "shared-dma-pool".
> +      See ../reserved-memory/reserved-memory.txt for details.

What does that file contain?

No need to provide generic descriptions of common properties, so the 
reference can just be dropped.

> +
> +  mediatek,topckgen:
> +    $ref: "/schemas/types.yaml#/definitions/phandle"

Don't need quotes.

> +    description: The phandle of the mediatek topckgen controller
> +
> +  mediatek,infracfg:
> +    $ref: "/schemas/types.yaml#/definitions/phandle"
> +    description: The phandle of the mediatek infracfg controller
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: 26M clock
> +      - description: audio pll1 clock
> +      - description: audio pll2 clock
> +      - description: clock divider for i2si1_mck
> +      - description: clock divider for i2si2_mck
> +      - description: clock divider for i2so1_mck
> +      - description: clock divider for i2so2_mck
> +      - description: clock divider for dptx_mck
> +      - description: a1sys hoping clock
> +      - description: audio intbus clock
> +      - description: audio hires clock
> +      - description: audio local bus clock
> +      - description: mux for dptx_mck
> +      - description: mux for i2so1_mck
> +      - description: mux for i2so2_mck
> +      - description: mux for i2si1_mck
> +      - description: mux for i2si2_mck
> +      - description: audio 26m clock
> +
> +  clock-names:
> +    items:
> +      - const: clk26m
> +      - const: apll1_ck
> +      - const: apll2_ck
> +      - const: apll12_div0
> +      - const: apll12_div1
> +      - const: apll12_div2
> +      - const: apll12_div3
> +      - const: apll12_div9
> +      - const: a1sys_hp_sel
> +      - const: aud_intbus_sel
> +      - const: audio_h_sel
> +      - const: audio_local_bus_sel
> +      - const: dptx_m_sel
> +      - const: i2so1_m_sel
> +      - const: i2so2_m_sel
> +      - const: i2si1_m_sel
> +      - const: i2si2_m_sel
> +      - const: adsp_audio26m
> +
> +  mediatek,etdm-in1-chn-disabled:
> +    $ref: /schemas/types.yaml#/definitions/uint8-array
> +    maxItems: 16
> +    description: Specify which input channel should be disabled.

What value disables/enables?

items:
  enum: [ ??? ]

> +
> +  mediatek,etdm-in2-chn-disabled:
> +    $ref: /schemas/types.yaml#/definitions/uint8-array
> +    maxItems: 16
> +    description: Specify which input channel should be disabled.
> +
> +patternProperties:
> +  "^mediatek,etdm-in[1-2]-mclk-always-on-rate-hz$":
> +    description: Specify etdm in mclk output rate for always on case.
> +
> +  "^mediatek,etdm-out[1-3]-mclk-always-on-rate-hz$":
> +    description: Specify etdm out mclk output rate for always on case.
> +
> +  "^mediatek,etdm-in[1-2]-multi-pin-mode$":
> +    type: boolean
> +    description: if present, the etdm data mode is I2S.
> +
> +  "^mediatek,etdm-out[1-3]-multi-pin-mode$":
> +    type: boolean
> +    description: if present, the etdm data mode is I2S.
> +
> +  "^mediatek,etdm-in[1-2]-cowork-source$":
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: |
> +      etdm modules can share the same external clock pin. Specify
> +      which etdm clock source is required by this etdm in moudule.
> +    enum:
> +      - 0 # etdm1_in
> +      - 1 # etdm2_in
> +      - 2 # etdm1_out
> +      - 3 # etdm2_out
> +
> +  "^mediatek,etdm-out[1-2]-cowork-source$":
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: |
> +      etdm modules can share the same external clock pin. Specify
> +      which etdm clock source is required by this etdm out moudule.
> +    enum:
> +      - 0 # etdm1_in
> +      - 1 # etdm2_in
> +      - 2 # etdm1_out
> +      - 3 # etdm2_out
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - resets
> +  - reset-names
> +  - mediatek,topckgen
> +  - mediatek,infracfg
> +  - power-domains
> +  - clocks
> +  - clock-names
> +  - memory-region
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    afe: afe@10b10000 {
> +        compatible = "mediatek,mt8188-audio";
> +        reg = <0x10b10000 0x10000>;
> +        interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH 0>;
> +        resets = <&watchdog 14>;
> +        reset-names = "audiosys";
> +        mediatek,topckgen = <&topckgen>;
> +        mediatek,infracfg = <&infracfg_ao>;
> +        power-domains = <&spm 7>; //MT8195_POWER_DOMAIN_AUDIO
> +        memory-region = <&snd_dma_mem_reserved>;
> +        clocks = <&clk26m>,
> +                 <&topckgen 72>, //CLK_TOP_APLL1
> +                 <&topckgen 73>, //CLK_TOP_APLL2
> +                 <&topckgen 186>, //CLK_TOP_APLL12_CK_DIV0
> +                 <&topckgen 187>, //CLK_TOP_APLL12_CK_DIV1
> +                 <&topckgen 188>, //CLK_TOP_APLL12_CK_DIV2
> +                 <&topckgen 189>, //CLK_TOP_APLL12_CK_DIV3
> +                 <&topckgen 191>, //CLK_TOP_APLL12_CK_DIV9
> +                 <&topckgen 83>, //CLK_TOP_A1SYS_HP
> +                 <&topckgen 31>, //CLK_TOP_AUD_INTBUS
> +                 <&topckgen 32>, //CLK_TOP_AUDIO_H
> +                 <&topckgen 69>, //CLK_TOP_AUDIO_LOCAL_BUS
> +                 <&topckgen 81>, //CLK_TOP_DPTX
> +                 <&topckgen 77>, //CLK_TOP_I2SO1
> +                 <&topckgen 78>, //CLK_TOP_I2SO2
> +                 <&topckgen 79>, //CLK_TOP_I2SI1
> +                 <&topckgen 80>, //CLK_TOP_I2SI2
> +                 <&adsp_audio26m 0>; //CLK_AUDIODSP_AUDIO26M
> +        clock-names = "clk26m",
> +                      "apll1_ck",
> +                      "apll2_ck",
> +                      "apll12_div0",
> +                      "apll12_div1",
> +                      "apll12_div2",
> +                      "apll12_div3",
> +                      "apll12_div9",
> +                      "a1sys_hp_sel",
> +                      "aud_intbus_sel",
> +                      "audio_h_sel",
> +                      "audio_local_bus_sel",
> +                      "dptx_m_sel",
> +                      "i2so1_m_sel",
> +                      "i2so2_m_sel",
> +                      "i2si1_m_sel",
> +                      "i2si2_m_sel",
> +                      "adsp_audio_26m";
> +    };
> +
> +...
> -- 
> 2.18.0
> 
>

On Mon, 2022-10-03 at 11:30 -0500, Rob Herring wrote:
> On Fri, Sep 30, 2022 at 10:56:59PM +0800, Trevor Wu wrote:
> > Add mt8188 audio afe document.
> > 
> > Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
> > ---
> >  .../bindings/sound/mt8188-afe-pcm.yaml        | 202
> > ++++++++++++++++++
> >  1 file changed, 202 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/sound/mt8188-
> > afe-pcm.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/sound/mt8188-afe-
> > pcm.yaml b/Documentation/devicetree/bindings/sound/mt8188-afe-
> > pcm.yaml
> > new file mode 100644
> > index 000000000000..50d53c5d59ad
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/sound/mt8188-afe-pcm.yaml
> > @@ -0,0 +1,202 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: 
> > https://urldefense.com/v3/__http://devicetree.org/schemas/sound/mt8188-afe-pcm.yaml*__;Iw!!CTRNKA9wMg0ARbw!xwWXHB7ARJJusyOyhgO1AwihlxFMNOrcEU6Qs5vpVCj2VHgxRXNRfpHvNTkqt1MlsQ$
> >  
> > +$schema: 
> > https://urldefense.com/v3/__http://devicetree.org/meta-schemas/core.yaml*__;Iw!!CTRNKA9wMg0ARbw!xwWXHB7ARJJusyOyhgO1AwihlxFMNOrcEU6Qs5vpVCj2VHgxRXNRfpHvNTk0c9L9VQ$
> >  
> > +
> > +title: Mediatek AFE PCM controller for mt8188
> > +
> > +maintainers:
> > +  - Trevor Wu <trevor.wu@mediatek.com>
> > +
> > +properties:
> > +  compatible:
> > +    const: mediatek,mt8188-audio
> 
> If the block is called 'AFE PCM controller', then perhaps use some
> of 
> that for the name instead of just 'audio'.

OK. Is "mediatek,mt8188-afe" better for you?
> 
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  resets:
> > +    maxItems: 1
> > +
> > +  reset-names:
> > +    const: audiosys
> > +
> > +  memory-region:
> > +    maxItems: 1
> > +    description: |
> > +      Shared memory region for AFE memif.  A "shared-dma-pool".
> > +      See ../reserved-memory/reserved-memory.txt for details.
> 
> What does that file contain?
> 
> No need to provide generic descriptions of common properties, so the 
> reference can just be dropped.
> 

"../reserved-memory/reserved-memory" contains the detail of reserved-
memory, and it's replaced by reserved-memory.yaml now.
I will remove the item in V2, because it's still not supported in the
current code base.
Next time I will remove the description, when I add common properties.

> > +
> > +  mediatek,topckgen:
> > +    $ref: "/schemas/types.yaml#/definitions/phandle"
> 
> Don't need quotes.
> 
Did you mean I should delete this line, and only leave description
here?

> > +    description: The phandle of the mediatek topckgen controller
> > +
> > +  mediatek,infracfg:
> > +    $ref: "/schemas/types.yaml#/definitions/phandle"
> > +    description: The phandle of the mediatek infracfg controller
> > +
> > +  power-domains:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    items:
> > +      - description: 26M clock
> > +      - description: audio pll1 clock
> > +      - description: audio pll2 clock
> > +      - description: clock divider for i2si1_mck
> > +      - description: clock divider for i2si2_mck
> > +      - description: clock divider for i2so1_mck
> > +      - description: clock divider for i2so2_mck
> > +      - description: clock divider for dptx_mck
> > +      - description: a1sys hoping clock
> > +      - description: audio intbus clock
> > +      - description: audio hires clock
> > +      - description: audio local bus clock
> > +      - description: mux for dptx_mck
> > +      - description: mux for i2so1_mck
> > +      - description: mux for i2so2_mck
> > +      - description: mux for i2si1_mck
> > +      - description: mux for i2si2_mck
> > +      - description: audio 26m clock
> > +
> > +  clock-names:
> > +    items:
> > +      - const: clk26m
> > +      - const: apll1_ck
> > +      - const: apll2_ck
> > +      - const: apll12_div0
> > +      - const: apll12_div1
> > +      - const: apll12_div2
> > +      - const: apll12_div3
> > +      - const: apll12_div9
> > +      - const: a1sys_hp_sel
> > +      - const: aud_intbus_sel
> > +      - const: audio_h_sel
> > +      - const: audio_local_bus_sel
> > +      - const: dptx_m_sel
> > +      - const: i2so1_m_sel
> > +      - const: i2so2_m_sel
> > +      - const: i2si1_m_sel
> > +      - const: i2si2_m_sel
> > +      - const: adsp_audio26m
> > +
> > +  mediatek,etdm-in1-chn-disabled:
> > +    $ref: /schemas/types.yaml#/definitions/uint8-array
> > +    maxItems: 16
> > +    description: Specify which input channel should be disabled.
> 
> What value disables/enables?
> 
> items:
>   enum: [ ??? ]
> 
Max channel number is 16, so the value could be 0~15 in the array.
For example, when 0 and 2 are configured, the input channel 0 and
channel 2 won't be put in data on memory.

I will add enum: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
here.

> > +
> > +  mediatek,etdm-in2-chn-disabled:
> > +    $ref: /schemas/types.yaml#/definitions/uint8-array
> > +    maxItems: 16
> > +    description: Specify which input channel should be disabled.
> > +
> > +patternProperties:
> > +  "^mediatek,etdm-in[1-2]-mclk-always-on-rate-hz$":
> > +    description: Specify etdm in mclk output rate for always on
> > case.
> > +
> > +  "^mediatek,etdm-out[1-3]-mclk-always-on-rate-hz$":
> > +    description: Specify etdm out mclk output rate for always on
> > case.
> > +
> > +  "^mediatek,etdm-in[1-2]-multi-pin-mode$":
> > +    type: boolean
> > +    description: if present, the etdm data mode is I2S.
> > +
> > +  "^mediatek,etdm-out[1-3]-multi-pin-mode$":
> > +    type: boolean
> > +    description: if present, the etdm data mode is I2S.
> > +
> > +  "^mediatek,etdm-in[1-2]-cowork-source$":
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    description: |
> > +      etdm modules can share the same external clock pin. Specify
> > +      which etdm clock source is required by this etdm in moudule.
> > +    enum:
> > +      - 0 # etdm1_in
> > +      - 1 # etdm2_in
> > +      - 2 # etdm1_out
> > +      - 3 # etdm2_out
> > +
> > +  "^mediatek,etdm-out[1-2]-cowork-source$":
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    description: |
> > +      etdm modules can share the same external clock pin. Specify
> > +      which etdm clock source is required by this etdm out
> > moudule.
> > +    enum:
> > +      - 0 # etdm1_in
> > +      - 1 # etdm2_in
> > +      - 2 # etdm1_out
> > +      - 3 # etdm2_out
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - resets
> > +  - reset-names
> > +  - mediatek,topckgen
> > +  - mediatek,infracfg
> > +  - power-domains
> > +  - clocks
> > +  - clock-names
> > +  - memory-region
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +
> > +    afe: afe@10b10000 {
> > +        compatible = "mediatek,mt8188-audio";
> > +        reg = <0x10b10000 0x10000>;
> > +        interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH 0>;
> > +        resets = <&watchdog 14>;
> > +        reset-names = "audiosys";
> > +        mediatek,topckgen = <&topckgen>;
> > +        mediatek,infracfg = <&infracfg_ao>;
> > +        power-domains = <&spm 7>; //MT8195_POWER_DOMAIN_AUDIO
> > +        memory-region = <&snd_dma_mem_reserved>;
> > +        clocks = <&clk26m>,
> > +                 <&topckgen 72>, //CLK_TOP_APLL1
> > +                 <&topckgen 73>, //CLK_TOP_APLL2
> > +                 <&topckgen 186>, //CLK_TOP_APLL12_CK_DIV0
> > +                 <&topckgen 187>, //CLK_TOP_APLL12_CK_DIV1
> > +                 <&topckgen 188>, //CLK_TOP_APLL12_CK_DIV2
> > +                 <&topckgen 189>, //CLK_TOP_APLL12_CK_DIV3
> > +                 <&topckgen 191>, //CLK_TOP_APLL12_CK_DIV9
> > +                 <&topckgen 83>, //CLK_TOP_A1SYS_HP
> > +                 <&topckgen 31>, //CLK_TOP_AUD_INTBUS
> > +                 <&topckgen 32>, //CLK_TOP_AUDIO_H
> > +                 <&topckgen 69>, //CLK_TOP_AUDIO_LOCAL_BUS
> > +                 <&topckgen 81>, //CLK_TOP_DPTX
> > +                 <&topckgen 77>, //CLK_TOP_I2SO1
> > +                 <&topckgen 78>, //CLK_TOP_I2SO2
> > +                 <&topckgen 79>, //CLK_TOP_I2SI1
> > +                 <&topckgen 80>, //CLK_TOP_I2SI2
> > +                 <&adsp_audio26m 0>; //CLK_AUDIODSP_AUDIO26M
> > +        clock-names = "clk26m",
> > +                      "apll1_ck",
> > +                      "apll2_ck",
> > +                      "apll12_div0",
> > +                      "apll12_div1",
> > +                      "apll12_div2",
> > +                      "apll12_div3",
> > +                      "apll12_div9",
> > +                      "a1sys_hp_sel",
> > +                      "aud_intbus_sel",
> > +                      "audio_h_sel",
> > +                      "audio_local_bus_sel",
> > +                      "dptx_m_sel",
> > +                      "i2so1_m_sel",
> > +                      "i2so2_m_sel",
> > +                      "i2si1_m_sel",
> > +                      "i2si2_m_sel",
> > +                      "adsp_audio_26m";
> > +    };
> > +
> > +...
> > -- 
> > 2.18.0
> > 
> >

On 04/10/2022 23:57, Trevor Wu (吳文良) wrote:
>> date:
>>
>> pip3 install dtschema --upgrade
>>
>> Please check and re-submit.
>>
> 
> After upgrading dtschema, I can see the problem.
> I will correct it in V2.

Correct also cc list.


Best regards,
Krzysztof