@@ -219,7 +219,7 @@ examples:
/*
* pinmux nodes added for completeness. Binding doc can be found in:
- * Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt
+ * Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml
*/
pinmux: pinmux@700008d4 {
new file mode 100644
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra-pinmux-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Pinmux Controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jonathan Hunter <jonathanh@nvidia.com>
+
+description: |
+ Please refer to pinctrl-bindings.txt in this directory for details of the
+ common pinctrl bindings used by client devices, including the meaning of
+ the phrase "pin configuration node".
+
+ Tegra's pin configuration nodes act as a container for an arbitrary number
+ of subnodes. Each of these subnodes represents some desired configuration
+ for a pin, a group, or a list of pins or groups. This configuration can
+ include the mux function to select on those pin(s)/ group(s), and various
+ pin configuration parameters, such as pull-up, tristate, drive strength,
+ etc.
+
+ The name of each subnode is not important; all subnodes should be
+ enumerated and processed purely based on their content.
+
+ Each subnode only affects those parameters that are explicitly listed. In
+ other words, a subnode that lists a mux function but no pin configuration
+ parameters implies no information about any pin configuration parameters.
+
+ Similarly, a pin subnode that describes a pullup parameter implies no
+ information about e.g. the mux function or tristate parameter. For this
+ reason, even seemingly boolean values are actually tristates in this
+ binding: unspecified, off, or on. Unspecified is represented as an absent
+ property, and off/on are represented as integer values 0 and 1.
+
+ Note that many of these properties are only valid for certain specific pins
+ or groups. See the Tegra TRM and various pinmux spreadsheets for complete
+ details regarding which groups support which functionality. The Linux
+ pinctrl driver may also be a useful reference, since it consolidates,
+ disambiguates, and corrects data from all those sources.
+
+properties:
+ nvidia,pins:
+ $ref: /schemas/types.yaml#/definitions/string-array
+ description: An array of strings. Each string contains the name of a pin
+ or group. Valid values for these names are listed below.
+
+ nvidia,function:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: A string containing the name of the function to mux to the
+ pin or group. Valid values for function names are listed below. See the
+ Tegra TRM to determine which are valid for each pin or group.
+
+ nvidia,pull:
+ description: Pull-down/up setting to apply to the pin.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ oneOf:
+ - description: none
+ const: 0
+ - description: down
+ const: 1
+ - description: up
+ const: 2
+
+ nvidia,tristate:
+ description: Tristate setting to apply to the pin.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ oneOf:
+ - description: drive
+ const: 0
+ - description: tristate
+ const: 1
+
+ nvidia,schmitt:
+ description: Enable Schmitt trigger on the input.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ oneOf:
+ - description: disable Schmitt trigger on the input
+ const: 0
+ - description: enable Schmitt trigger on the input
+ const: 1
+
+ nvidia,pull-down-strength:
+ description: Controls drive strength. 0 is weakest. The range of valid
+ values depends on the pingroup. See "CAL_DRVDN" in the Tegra TRM.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ nvidia,pull-up-strength:
+ description: Controls drive strength. 0 is weakest. The range of valid
+ values depends on the pingroup. See "CAL_DRVUP" in the Tegra TRM.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ nvidia,high-speed-mode:
+ description: Enable high speed mode the pins.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ oneOf:
+ - description: normal speed mode
+ const: 0
+ - description: high speed mode
+ const: 1
+
+ nvidia,low-power-mode:
+ description: Controls the drive power or current. Valid values are from 0
+ through 3, where 0 specifies the least power and 3 specifies the most
+ power. See "Low Power Mode" or "LPMD1" and "LPMD0" in the Tegra TRM.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1, 2, 3 ]
+
+ nvidia,enable-input:
+ description: Enable the pin's input path.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ oneOf:
+ - description: disable input (i.e. output only)
+ const: 0
+ - description: enable input
+ const: 1
+
+ nvidia,open-drain:
+ description: Open-drain configuration for the pin.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ oneOf:
+ - description: disable open-drain
+ const: 0
+ - description: enable open-drain
+ const: 1
+
+ nvidia,lock:
+ description: Lock the pin configuration against further changes until
+ reset.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ oneOf:
+ - description: disable pin configuration lock
+ const: 0
+ - description: enable pin configuration lock
+ const: 1
+
+ nvidia,io-reset:
+ description: reset the I/O path
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1 ]
+
+ nvidia,rcv-sel:
+ description: select VIL/VIH receivers
+ $ref: /schemas/types.yaml#/definitions/uint32
+ oneOf:
+ - description: normal receivers
+ const: 0
+ - description: high-voltage receivers
+ const: 1
+
+ nvidia,drive-type:
+ description: Drive type to configure for the pin.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1, 2, 3 ]
+
+ nvidia,io-hv:
+ description: Select high-voltage receivers.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ oneOf:
+ - description: Use normal receivers.
+ const: 0
+ - description: Use high-voltage receivers.
+ const: 1
+
+ nvidia,slew-rate-rising:
+ description: Controls rising signal slew rate. 0 is fastest. The range of
+ valid values depends on the pingroup. See "DRVDN_SLWR" in the Tegra TRM.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ nvidia,slew-rate-falling:
+ description: Controls falling signal slew rate. 0 is fastest. The range of
+ valid values depends on the pingroup. See "DRVUP_SLWF" in the Tegra TRM.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+additionalProperties: true
+...
deleted file mode 100644
@@ -1,131 +0,0 @@
-NVIDIA Tegra114 pinmux controller
-
-The Tegra114 pinctrl binding is very similar to the Tegra20 and Tegra30
-pinctrl binding, as described in nvidia,tegra20-pinmux.txt and
-nvidia,tegra30-pinmux.txt. In fact, this document assumes that binding as
-a baseline, and only documents the differences between the two bindings.
-
-Required properties:
-- compatible: "nvidia,tegra114-pinmux"
-- reg: Should contain the register physical address and length for each of
- the pad control and mux registers. The first bank of address must be the
- driver strength pad control register address and second bank address must
- be pinmux register address.
-
-Tegra114 adds the following optional properties for pin configuration subnodes:
-- nvidia,enable-input: Integer. Enable the pin's input path. 0: no, 1: yes.
-- nvidia,open-drain: Integer. Enable open drain mode. 0: no, 1: yes.
-- nvidia,lock: Integer. Lock the pin configuration against further changes
- until reset. 0: no, 1: yes.
-- nvidia,io-reset: Integer. Reset the IO path. 0: no, 1: yes.
-- nvidia,rcv-sel: Integer. Select VIL/VIH receivers. 0: normal, 1: high.
-- nvidia,drive-type: Integer. Valid range 0...3.
-
-As with Tegra20 and Terga30, see the Tegra TRM for complete details regarding
-which groups support which functionality.
-
-Valid values for pin and group names are:
-
- per-pin mux groups:
-
- These all support nvidia,function, nvidia,tristate, nvidia,pull,
- nvidia,enable-input, nvidia,lock. Some support nvidia,open-drain,
- nvidia,io-reset and nvidia,rcv-sel.
-
- ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3, ulpi_data3_po4,
- ulpi_data4_po5, ulpi_data5_po6, ulpi_data6_po7, ulpi_data7_po0,
- ulpi_clk_py0, ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0,
- dap3_din_pp1, dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0,
- sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5, sdmmc1_dat1_py6,
- sdmmc1_dat0_py7, clk2_out_pw5, clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4,
- ddc_sda_pv5, uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6,
- uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7, uart3_cts_n_pa1,
- uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4, pu5, pu6, gen1_i2c_sda_pc5,
- gen1_i2c_scl_pc4, dap4_fs_pp4, dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7,
- clk3_out_pee0, clk3_req_pee1, gmi_wp_n_pc7, gmi_iordy_pi5, gmi_wait_pi7,
- gmi_adv_n_pk0, gmi_clk_pk1, gmi_cs0_n_pj0, gmi_cs1_n_pj2, gmi_cs2_n_pk3,
- gmi_cs3_n_pk4, gmi_cs4_n_pk2, gmi_cs6_n_pi3, gmi_cs7_n_pi6, gmi_ad0_pg0,
- gmi_ad1_pg1, gmi_ad2_pg2, gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5,
- gmi_ad6_pg6, gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2,
- gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6, gmi_ad15_ph7,
- gmi_a16_pj7, gmi_a17_pb0, gmi_a18_pb1, gmi_a19_pk7, gmi_wr_n_pi0,
- gmi_oe_n_pi1, gmi_dqs_p_pj3, gmi_rst_n_pi4, gen2_i2c_scl_pt5,
- gen2_i2c_sda_pt6, sdmmc4_clk_pcc4, sdmmc4_cmd_pt7, sdmmc4_dat0_paa0,
- sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, sdmmc4_dat4_paa4,
- sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, sdmmc4_dat7_paa7, cam_mclk_pcc0,
- pcc1, pbb0, cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6,
- pbb7, pcc2, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, kb_row0_pr0, kb_row1_pr1,
- kb_row2_pr2, kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, kb_row6_pr6,
- kb_row7_pr7, kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_col0_pq0,
- kb_col1_pq1, kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5,
- kb_col6_pq6, kb_col7_pq7, clk_32k_out_pa0, sys_clk_req_pz5, core_pwr_req,
- cpu_pwr_req, pwr_int_n, owr, dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2,
- dap1_sclk_pn3, clk1_req_pee2, clk1_out_pw4, spdif_in_pk6, spdif_out_pk5,
- dap2_fs_pa2, dap2_din_pa4, dap2_dout_pa5, dap2_sclk_pa3, dvfs_pwm_px0,
- gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2, gpio_x4_aud_px4,
- gpio_x5_aud_px5, gpio_x6_aud_px6, gpio_x7_aud_px7, sdmmc3_clk_pa6,
- sdmmc3_cmd_pa7, sdmmc3_dat0_pb7, sdmmc3_dat1_pb6, sdmmc3_dat2_pb5,
- sdmmc3_dat3_pb4, hdmi_cec_pee3, sdmmc1_wp_n_pv3, sdmmc3_cd_n_pv2,
- gpio_w2_aud_pw2, gpio_w3_aud_pw3, usb_vbus_en0_pn4, usb_vbus_en1_pn5,
- sdmmc3_clk_lb_in_pee5, sdmmc3_clk_lb_out_pee4, reset_out_n.
-
- drive groups:
-
- These all support nvidia,pull-down-strength, nvidia,pull-up-strength,
- nvidia,slew-rate-rising, nvidia,slew-rate-falling. Most but not all
- support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode
- and nvidia,drive-type.
-
- ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, dap1, dap2, dap3, dap4,
- dbg, sdio3, spi, uaa, uab, uart2, uart3, sdio1, ddc, gma, gme, gmf, gmg,
- gmh, owr, uda.
-
-Valid values for nvidia,functions are:
-
- blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3, displaya,
- displaya_alt, displayb, dtv, emc_dll, extperiph1, extperiph2,
- extperiph3, gmi, gmi_alt, hda, hsi, i2c1, i2c2, i2c3, i2c4, i2cpwr,
- i2s0, i2s1, i2s2, i2s3, i2s4, irda, kbc, nand, nand_alt, owr, pmi,
- pwm0, pwm1, pwm2, pwm3, pwron, reset_out_n, rsvd1, rsvd2, rsvd3,
- rsvd4, sdmmc1, sdmmc2, sdmmc3, sdmmc4, soc, spdif, spi1, spi2, spi3,
- spi4, spi5, spi6, sysclk, trace, uarta, uartb, uartc, uartd, ulpi,
- usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, vi, vi_alt1, vi_alt3
-
-Example:
-
- pinmux: pinmux {
- compatible = "nvidia,tegra114-pinmux";
- reg = <0x70000868 0x148 /* Pad control registers */
- 0x70003000 0x40c>; /* PinMux registers */
- };
-
-Example board file extract:
-
- pinctrl {
- sdmmc4_default: pinmux {
- sdmmc4_clk_pcc4 {
- nvidia,pins = "sdmmc4_clk_pcc4",
- nvidia,function = "sdmmc4";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- };
- sdmmc4_dat0_paa0 {
- nvidia,pins = "sdmmc4_dat0_paa0",
- "sdmmc4_dat1_paa1",
- "sdmmc4_dat2_paa2",
- "sdmmc4_dat3_paa3",
- "sdmmc4_dat4_paa4",
- "sdmmc4_dat5_paa5",
- "sdmmc4_dat6_paa6",
- "sdmmc4_dat7_paa7";
- nvidia,function = "sdmmc4";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
- };
- };
- };
-
- sdhci@78000400 {
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc4_default>;
- };
new file mode 100644
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra114-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra114 pinmux Controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+ compatible:
+ const: nvidia,tegra114-pinmux
+
+ reg:
+ items:
+ - description: pad control registers
+ - description: mux registers
+
+patternProperties:
+ "^pinmux(-[a-z0-9-_]+)?$":
+ type: object
+ properties:
+ phandle: true
+
+ # pin groups
+ additionalProperties:
+ $ref: nvidia,tegra-pinmux-common.yaml
+ additionalProperties: false
+ properties:
+ nvidia,pins:
+ items:
+ enum: [ ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3,
+ ulpi_data3_po4, ulpi_data4_po5, ulpi_data5_po6,
+ ulpi_data6_po7, ulpi_data7_po0, ulpi_clk_py0, ulpi_dir_py1,
+ ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0, dap3_din_pp1,
+ dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0,
+ sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5,
+ sdmmc1_dat1_py6, sdmmc1_dat0_py7, clk2_out_pw5,
+ clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4, ddc_sda_pv5,
+ uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6,
+ uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7,
+ uart3_cts_n_pa1, uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4,
+ pu5, pu6, gen1_i2c_sda_pc5, gen1_i2c_scl_pc4, dap4_fs_pp4,
+ dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7, clk3_out_pee0,
+ clk3_req_pee1, gmi_wp_n_pc7, gmi_iordy_pi5, gmi_wait_pi7,
+ gmi_adv_n_pk0, gmi_clk_pk1, gmi_cs0_n_pj0, gmi_cs1_n_pj2,
+ gmi_cs2_n_pk3, gmi_cs3_n_pk4, gmi_cs4_n_pk2, gmi_cs6_n_pi3,
+ gmi_cs7_n_pi6, gmi_ad0_pg0, gmi_ad1_pg1, gmi_ad2_pg2,
+ gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5, gmi_ad6_pg6,
+ gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2,
+ gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6,
+ gmi_ad15_ph7, gmi_a16_pj7, gmi_a17_pb0, gmi_a18_pb1,
+ gmi_a19_pk7, gmi_wr_n_pi0, gmi_oe_n_pi1, gmi_dqs_p_pj3,
+ gmi_rst_n_pi4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6,
+ sdmmc4_clk_pcc4, sdmmc4_cmd_pt7, sdmmc4_dat0_paa0,
+ sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3,
+ sdmmc4_dat4_paa4, sdmmc4_dat5_paa5, sdmmc4_dat6_paa6,
+ sdmmc4_dat7_paa7, cam_mclk_pcc0, pcc1, pbb0,
+ cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6,
+ pbb7, pcc2, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, kb_row0_pr0,
+ kb_row1_pr1, kb_row2_pr2, kb_row3_pr3, kb_row4_pr4,
+ kb_row5_pr5, kb_row6_pr6, kb_row7_pr7, kb_row8_ps0,
+ kb_row9_ps1, kb_row10_ps2, kb_col0_pq0, kb_col1_pq1,
+ kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5,
+ kb_col6_pq6, kb_col7_pq7, clk_32k_out_pa0, sys_clk_req_pz5,
+ core_pwr_req, cpu_pwr_req, pwr_int_n, owr, dap1_fs_pn0,
+ dap1_din_pn1, dap1_dout_pn2, dap1_sclk_pn3, clk1_req_pee2,
+ clk1_out_pw4, spdif_in_pk6, spdif_out_pk5, dap2_fs_pa2,
+ dap2_din_pa4, dap2_dout_pa5, dap2_sclk_pa3, dvfs_pwm_px0,
+ gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2,
+ gpio_x4_aud_px4, gpio_x5_aud_px5, gpio_x6_aud_px6,
+ gpio_x7_aud_px7, sdmmc3_clk_pa6, sdmmc3_cmd_pa7,
+ sdmmc3_dat0_pb7, sdmmc3_dat1_pb6, sdmmc3_dat2_pb5,
+ sdmmc3_dat3_pb4, hdmi_cec_pee3, sdmmc1_wp_n_pv3,
+ sdmmc3_cd_n_pv2, gpio_w2_aud_pw2, gpio_w3_aud_pw3,
+ usb_vbus_en0_pn4, usb_vbus_en1_pn5, sdmmc3_clk_lb_in_pee5,
+ sdmmc3_clk_lb_out_pee4, reset_out_n,
+ # drive groups
+ drive_ao1, drive_ao2, drive_at1, drive_at2, drive_at3,
+ drive_at4, drive_at5, drive_cdev1, drive_cdev2, drive_dap1,
+ drive_dap2, drive_dap3, drive_dap4, drive_dbg, drive_sdio3,
+ drive_spi, drive_uaa, drive_uab, drive_uart2, drive_uart3,
+ drive_sdio1, drive_ddc, drive_gma, drive_gme, drive_gmf,
+ drive_gmg, drive_gmh, drive_owr, drive_uda ]
+
+ nvidia,function:
+ enum: [ blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3,
+ displaya, displaya_alt, displayb, dtv, emc_dll, extperiph1,
+ extperiph2, extperiph3, gmi, gmi_alt, hda, hsi, i2c1, i2c2,
+ i2c3, i2c4, i2cpwr, i2s0, i2s1, i2s2, i2s3, i2s4, irda, kbc,
+ nand, nand_alt, owr, pmi, pwm0, pwm1, pwm2, pwm3, pwron,
+ reset_out_n, rsvd1, rsvd2, rsvd3, rsvd4, sdmmc1, sdmmc2,
+ sdmmc3, sdmmc4, soc, spdif, spi1, spi2, spi3, spi4, spi5,
+ spi6, sysclk, trace, uarta, uartb, uartc, uartd, ulpi, usb,
+ vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, vi, vi_alt1, vi_alt3 ]
+
+ nvidia,pull: true
+ nvidia,tristate: true
+ nvidia,schmitt: true
+ nvidia,pull-down-strength: true
+ nvidia,pull-up-strength: true
+ nvidia,high-speed-mode: true
+ nvidia,low-power-mode: true
+ nvidia,enable-input: true
+ nvidia,open-drain: true
+ nvidia,lock: true
+ nvidia,io-reset: true
+ nvidia,rcv-sel: true
+ nvidia,drive-type: true
+ nvidia,slew-rate-rising: true
+ nvidia,slew-rate-falling: true
+
+ required:
+ - nvidia,pins
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ pinmux@70000868 {
+ compatible = "nvidia,tegra114-pinmux";
+ reg = <0x70000868 0x148>, /* Pad control registers */
+ <0x70003000 0x40c>; /* PinMux registers */
+
+ pinmux {
+ sdmmc4_clk_pcc4 {
+ nvidia,pins = "sdmmc4_clk_pcc4";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+
+ sdmmc4_dat0_paa0 {
+ nvidia,pins = "sdmmc4_dat0_paa0",
+ "sdmmc4_dat1_paa1",
+ "sdmmc4_dat2_paa2",
+ "sdmmc4_dat3_paa3",
+ "sdmmc4_dat4_paa4",
+ "sdmmc4_dat5_paa5",
+ "sdmmc4_dat6_paa6",
+ "sdmmc4_dat7_paa7";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ };
+ };
+ };
+...
deleted file mode 100644
@@ -1,153 +0,0 @@
-NVIDIA Tegra124 pinmux controller
-
-The Tegra124 pinctrl binding is very similar to the Tegra20 and Tegra30
-pinctrl binding, as described in nvidia,tegra20-pinmux.txt and
-nvidia,tegra30-pinmux.txt. In fact, this document assumes that binding as
-a baseline, and only documents the differences between the two bindings.
-
-Required properties:
-- compatible: For Tegra124, must contain "nvidia,tegra124-pinmux". For
- Tegra132, must contain '"nvidia,tegra132-pinmux", "nvidia-tegra124-pinmux"'.
-- reg: Should contain a list of base address and size pairs for:
- -- first entry - the drive strength and pad control registers.
- -- second entry - the pinmux registers
- -- third entry - the MIPI_PAD_CTRL register
-
-Tegra124 adds the following optional properties for pin configuration subnodes.
-The macros for options are defined in the
- include/dt-binding/pinctrl/pinctrl-tegra.h.
-- nvidia,enable-input: Integer. Enable the pin's input path.
- enable :TEGRA_PIN_ENABLE and
- disable or output only: TEGRA_PIN_DISABLE.
-- nvidia,open-drain: Integer.
- enable: TEGRA_PIN_ENABLE.
- disable: TEGRA_PIN_DISABLE.
-- nvidia,lock: Integer. Lock the pin configuration against further changes
- until reset.
- enable: TEGRA_PIN_ENABLE.
- disable: TEGRA_PIN_DISABLE.
-- nvidia,io-reset: Integer. Reset the IO path.
- enable: TEGRA_PIN_ENABLE.
- disable: TEGRA_PIN_DISABLE.
-- nvidia,rcv-sel: Integer. Select VIL/VIH receivers.
- normal: TEGRA_PIN_DISABLE
- high: TEGRA_PIN_ENABLE
-
-Please refer the Tegra TRM for complete details regarding which groups
-support which functionality.
-
-Valid values for pin and group names are:
-
- per-pin mux groups:
-
- These all support nvidia,function, nvidia,tristate, nvidia,pull,
- nvidia,enable-input. Some support nvidia,lock nvidia,open-drain,
- nvidia,io-reset and nvidia,rcv-sel.
-
- ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3, ulpi_data3_po4,
- ulpi_data4_po5, ulpi_data5_po6, ulpi_data6_po7, ulpi_data7_po0,
- ulpi_clk_py0, ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0,
- dap3_din_pp1, dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0,
- sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5, sdmmc1_dat1_py6,
- sdmmc1_dat0_py7, clk2_out_pw5, clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4,
- ddc_sda_pv5, uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6,
- uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7, uart3_cts_n_pa1,
- uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4, pu5, pu6, gen1_i2c_scl_pc4,
- gen1_i2c_sda_pc5, dap4_fs_pp4, dap4_din_pp5, dap4_dout_pp6,
- dap4_sclk_pp7, clk3_out_pee0, clk3_req_pee1, pc7, pi5, pi7, pk0, pk1,
- pj0, pj2, pk3, pk4, pk2, pi3, pi6, pg0, pg1, pg2, pg3, pg4, pg5, pg6,
- pg7, ph0, ph1, ph2, ph3, ph4, ph5, ph6, ph7, pj7, pb0, pb1, pk7, pi0,
- pi1, pi2, pi4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6, sdmmc4_clk_pcc4,
- sdmmc4_cmd_pt7, sdmmc4_dat0_paa0, sdmmc4_dat1_paa1, sdmmc4_dat2_paa2,
- sdmmc4_dat3_paa3, sdmmc4_dat4_paa4, sdmmc4_dat5_paa5, sdmmc4_dat6_paa6,
- sdmmc4_dat7_paa7, cam_mclk_pcc0, pcc1, pbb0, cam_i2c_scl_pbb1,
- cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, pbb7, pcc2, jtag_rtck,
- pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, kb_row0_pr0, kb_row1_pr1, kb_row2_pr2,
- kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, kb_row7_pr7,
- kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_row11_ps3, kb_row12_ps4,
- kb_row13_ps5, kb_row14_ps6, kb_row15_ps7, kb_col0_pq0, kb_col1_pq1,
- kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5, kb_col6_pq6,
- kb_col7_pq7, clk_32k_out_pa0, core_pwr_req, cpu_pwr_req, pwr_int_n,
- clk_32k_in, owr, dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2,
- dap1_sclk_pn3, dap_mclk1_req_pee2, dap_mclk1_pw4, spdif_in_pk6,
- spdif_out_pk5, dap2_fs_pa2, dap2_din_pa4, dap2_dout_pa5, dap2_sclk_pa3,
- dvfs_pwm_px0, gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2,
- gpio_x4_aud_px4, gpio_x5_aud_px5, gpio_x6_aud_px6, gpio_x7_aud_px7,
- sdmmc3_clk_pa6, sdmmc3_cmd_pa7, sdmmc3_dat0_pb7, sdmmc3_dat1_pb6,
- sdmmc3_dat2_pb5, sdmmc3_dat3_pb4, pex_l0_rst_n_pdd1,
- pex_l0_clkreq_n_pdd2, pex_wake_n_pdd3, pex_l1_rst_n_pdd5,
- pex_l1_clkreq_n_pdd6, hdmi_cec_pee3, sdmmc1_wp_n_pv3,
- sdmmc3_cd_n_pv2, gpio_w2_aud_pw2, gpio_w3_aud_pw3, usb_vbus_en0_pn4,
- usb_vbus_en1_pn5, sdmmc3_clk_lb_out_pee4, sdmmc3_clk_lb_in_pee5,
- gmi_clk_lb, reset_out_n, kb_row16_pt0, kb_row17_pt1, usb_vbus_en2_pff1,
- pff2, dp_hpd_pff0,
-
- drive groups:
-
- These all support nvidia,pull-down-strength, nvidia,pull-up-strength,
- nvidia,slew-rate-rising, nvidia,slew-rate-falling. Most but not all
- support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode
- and nvidia,drive-type.
-
- ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, dap1, dap2, dap3, dap4,
- dbg, sdio3, spi, uaa, uab, uart2, uart3, sdio1, ddc, gma, gme, gmf, gmg,
- gmh, owr, uda, gpv, dev3, cec, usb_vbus_en, ao3, ao0, hv0, sdio4, ao4.
-
- MIPI pad control groups:
-
- These support only the nvidia,function property.
-
- dsi_b
-
-Valid values for nvidia,functions are:
-
- blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3, displaya,
- displaya_alt, displayb, dtv, extperiph1, extperiph2, extperiph3,
- gmi, gmi_alt, hda, hsi, i2c1, i2c2, i2c3, i2c4, i2cpwr, i2s0,
- i2s1, i2s2, i2s3, i2s4, irda, kbc, owr, pmi, pwm0, pwm1, pwm2, pwm3,
- pwron, reset_out_n, rsvd1, rsvd2, rsvd3, rsvd4, sdmmc1, sdmmc2, sdmmc3,
- sdmmc4, soc, spdif, spi1, spi2, spi3, spi4, spi5, spi6, trace, uarta,
- uartb, uartc, uartd, ulpi, usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6,
- vi, vi_alt1, vi_alt3, vimclk2, vimclk2_alt, sata, ccla, pe0, pe, pe1,
- dp, rtck, sys, clk tmds, csi, dsi_b
-
-Example:
-
- pinmux: pinmux {
- compatible = "nvidia,tegra124-pinmux";
- reg = <0x0 0x70000868 0x0 0x164>, /* Pad control registers */
- <0x0 0x70003000 0x0 0x434>, /* Mux registers */
- <0x0 0x70000820 0x0 0x8>; /* MIPI pad control */
- };
-
-Example pinmux entries:
-
- pinctrl {
- sdmmc4_default: pinmux {
- sdmmc4_clk_pcc4 {
- nvidia,pins = "sdmmc4_clk_pcc4",
- nvidia,function = "sdmmc4";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
- };
-
- sdmmc4_dat0_paa0 {
- nvidia,pins = "sdmmc4_dat0_paa0",
- "sdmmc4_dat1_paa1",
- "sdmmc4_dat2_paa2",
- "sdmmc4_dat3_paa3",
- "sdmmc4_dat4_paa4",
- "sdmmc4_dat5_paa5",
- "sdmmc4_dat6_paa6",
- "sdmmc4_dat7_paa7";
- nvidia,function = "sdmmc4";
- nvidia,pull = <TEGRA_PIN_PULL_UP>;
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
- };
- };
- };
-
- sdhci@78000400 {
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc4_default>;
- };
new file mode 100644
@@ -0,0 +1,176 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra124-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra124 Pinmux Controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+description: The Tegra124 pinctrl binding is very similar to the Tegra20 and
+ Tegra30 pinctrl binding, as described in nvidia,tegra20-pinmux.yaml and
+ nvidia,tegra30-pinmux.yaml. In fact, this document assumes that binding as a
+ baseline, and only documents the differences between the two bindings.
+
+properties:
+ compatible:
+ oneOf:
+ - const: nvidia,tegra124-pinmux
+ - items:
+ - const: nvidia,tegra132-pinmux
+ - const: nvidia,tegra124-pinmux
+
+ reg:
+ items:
+ - description: driver strength and pad control registers
+ - description: pinmux registers
+ - description: MIPI_PAD_CTRL registers
+
+patternProperties:
+ "^pinmux(-[a-z0-9-_]+)?$":
+ type: object
+ properties:
+ phandle: true
+
+ # pin groups
+ additionalProperties:
+ $ref: nvidia,tegra-pinmux-common.yaml
+ additionalProperties: false
+ properties:
+ nvidia,pins:
+ $ref: /schemas/types.yaml#/definitions/string-array
+ items:
+ enum: [ ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3,
+ ulpi_data3_po4, ulpi_data4_po5, ulpi_data5_po6,
+ ulpi_data6_po7, ulpi_data7_po0, ulpi_clk_py0, ulpi_dir_py1,
+ ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0, dap3_din_pp1,
+ dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0,
+ sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5,
+ sdmmc1_dat1_py6, sdmmc1_dat0_py7, clk2_out_pw5,
+ clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4, ddc_sda_pv5,
+ uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6,
+ uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7,
+ uart3_cts_n_pa1, uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4,
+ pu5, pu6, gen1_i2c_scl_pc4, gen1_i2c_sda_pc5, dap4_fs_pp4,
+ dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7, clk3_out_pee0,
+ clk3_req_pee1, pc7, pi5, pi7, pk0, pk1, pj0, pj2, pk3, pk4,
+ pk2, pi3, pi6, pg0, pg1, pg2, pg3, pg4, pg5, pg6, pg7, ph0,
+ ph1, ph2, ph3, ph4, ph5, ph6, ph7, pj7, pb0, pb1, pk7, pi0,
+ pi1, pi2, pi4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6,
+ sdmmc4_clk_pcc4, sdmmc4_cmd_pt7, sdmmc4_dat0_paa0,
+ sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3,
+ sdmmc4_dat4_paa4, sdmmc4_dat5_paa5, sdmmc4_dat6_paa6,
+ sdmmc4_dat7_paa7, cam_mclk_pcc0, pcc1, pbb0,
+ cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6,
+ pbb7, pcc2, jtag_rtck, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7,
+ kb_row0_pr0, kb_row1_pr1, kb_row2_pr2, kb_row3_pr3,
+ kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, kb_row7_pr7,
+ kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_row11_ps3,
+ kb_row12_ps4, kb_row13_ps5, kb_row14_ps6, kb_row15_ps7,
+ kb_col0_pq0, kb_col1_pq1, kb_col2_pq2, kb_col3_pq3,
+ kb_col4_pq4, kb_col5_pq5, kb_col6_pq6, kb_col7_pq7,
+ clk_32k_out_pa0, core_pwr_req, cpu_pwr_req, pwr_int_n,
+ clk_32k_in, owr, dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2,
+ dap1_sclk_pn3, dap_mclk1_req_pee2, dap_mclk1_pw4,
+ spdif_in_pk6, spdif_out_pk5, dap2_fs_pa2, dap2_din_pa4,
+ dap2_dout_pa5, dap2_sclk_pa3, dvfs_pwm_px0,
+ gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2,
+ gpio_x4_aud_px4, gpio_x5_aud_px5, gpio_x6_aud_px6,
+ gpio_x7_aud_px7, sdmmc3_clk_pa6, sdmmc3_cmd_pa7,
+ sdmmc3_dat0_pb7, sdmmc3_dat1_pb6, sdmmc3_dat2_pb5,
+ sdmmc3_dat3_pb4, pex_l0_rst_n_pdd1, pex_l0_clkreq_n_pdd2,
+ pex_wake_n_pdd3, pex_l1_rst_n_pdd5, pex_l1_clkreq_n_pdd6,
+ hdmi_cec_pee3, sdmmc1_wp_n_pv3, sdmmc3_cd_n_pv2,
+ gpio_w2_aud_pw2, gpio_w3_aud_pw3, usb_vbus_en0_pn4,
+ usb_vbus_en1_pn5, sdmmc3_clk_lb_out_pee4,
+ sdmmc3_clk_lb_in_pee5, gmi_clk_lb, reset_out_n,
+ kb_row16_pt0, kb_row17_pt1, usb_vbus_en2_pff1, pff2,
+ dp_hpd_pff0,
+ # drive groups
+ drive_ao1, drive_ao2, drive_at1, drive_at2, drive_at3,
+ drive_at4, drive_at5, drive_cdev1, drive_cdev2, drive_dap1,
+ drive_dap2, drive_dap3, drive_dap4, drive_dbg, drive_sdio3,
+ drive_spi, drive_uaa, drive_uab, drive_uart2, drive_uart3,
+ drive_sdio1, drive_ddc, drive_gma, drive_gme, drive_gmf,
+ drive_gmg, drive_gmh, drive_owr, drive_uda, drive_gpv,
+ drive_dev3, drive_cec, drive_usb_vbus_en, drive_ao3,
+ drive_ao0, drive_hv0, drive_sdio4, drive_ao4,
+ # MIPI pad control groups
+ mipi_pad_ctrl_dsi_b ]
+
+ nvidia,function:
+ enum: [ blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3,
+ displaya, displaya_alt, displayb, dtv, extperiph1,
+ extperiph2, extperiph3, gmi, gmi_alt, hda, hsi, i2c1, i2c2,
+ i2c3, i2c4, i2cpwr, i2s0, i2s1, i2s2, i2s3, i2s4, irda, kbc,
+ owr, pmi, pwm0, pwm1, pwm2, pwm3, pwron, reset_out_n, rsvd1,
+ rsvd2, rsvd3, rsvd4, sdmmc1, sdmmc2, sdmmc3, sdmmc4, soc,
+ spdif, spi1, spi2, spi3, spi4, spi5, spi6, trace, uarta,
+ uartb, uartc, uartd, ulpi, usb, vgp1, vgp2, vgp3, vgp4, vgp5,
+ vgp6, vi, vi_alt1, vi_alt3, vimclk2, vimclk2_alt, sata, ccla,
+ pe0, pe, pe1, dp, rtck, sys, clk, tmds, csi, dsi_b ]
+
+ nvidia,pull: true
+ nvidia,tristate: true
+ nvidia,schmitt: true
+ nvidia,pull-down-strength: true
+ nvidia,pull-up-strength: true
+ nvidia,high-speed-mode: true
+ nvidia,low-power-mode: true
+ nvidia,enable-input: true
+ nvidia,open-drain: true
+ nvidia,lock: true
+ nvidia,io-reset: true
+ nvidia,rcv-sel: true
+ nvidia,drive-type: true
+ nvidia,slew-rate-rising: true
+ nvidia,slew-rate-falling: true
+
+ required:
+ - nvidia,pins
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra124-car.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/pinctrl/pinctrl-tegra.h>
+
+ pinmux@70000868 {
+ compatible = "nvidia,tegra124-pinmux";
+ reg = <0x70000868 0x164>, /* Pad control registers */
+ <0x70003000 0x434>, /* Mux registers */
+ <0x70000820 0x8>; /* MIPI pad control */
+
+ sdmmc4_default: pinmux {
+ sdmmc4_clk_pcc4 {
+ nvidia,pins = "sdmmc4_clk_pcc4";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ sdmmc4_dat0_paa0 {
+ nvidia,pins = "sdmmc4_dat0_paa0",
+ "sdmmc4_dat1_paa1",
+ "sdmmc4_dat2_paa2",
+ "sdmmc4_dat3_paa3",
+ "sdmmc4_dat4_paa4",
+ "sdmmc4_dat5_paa5",
+ "sdmmc4_dat6_paa6",
+ "sdmmc4_dat7_paa7";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ };
+ };
+...
deleted file mode 100644
@@ -1,107 +0,0 @@
-NVIDIA Tegra194 pinmux controller
-
-Required properties:
-- compatible: "nvidia,tegra194-pinmux"
-- reg: Should contain a list of base address and size pairs for:
- - first entry: The APB_MISC_GP_*_PADCTRL registers (pad control)
- - second entry: The PINMUX_AUX_* registers (pinmux)
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-Tegra's pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, tristate, drive strength, etc.
-
-See the TRM to determine which properties and values apply to each pin/group.
-Macro values for property values are defined in
-include/dt-binding/pinctrl/pinctrl-tegra.h.
-
-Required subnode-properties:
-- nvidia,pins : An array of strings. Each string contains the name of a pin or
- group. Valid values for these names are listed below.
-
-Optional subnode-properties:
-- nvidia,function: A string containing the name of the function to mux to the
- pin or group.
-- nvidia,pull: Integer, representing the pull-down/up to apply to the pin.
- 0: none, 1: down, 2: up.
-- nvidia,tristate: Integer.
- 0: drive, 1: tristate.
-- nvidia,enable-input: Integer. Enable the pin's input path.
- enable :TEGRA_PIN_ENABLE and
- disable or output only: TEGRA_PIN_DISABLE.
-- nvidia,open-drain: Integer.
- enable: TEGRA_PIN_ENABLE.
- disable: TEGRA_PIN_DISABLE.
-- nvidia,lock: Integer. Lock the pin configuration against further changes
- until reset.
- enable: TEGRA_PIN_ENABLE.
- disable: TEGRA_PIN_DISABLE.
-- nvidia,io-hv: Integer. Select high-voltage receivers.
- normal: TEGRA_PIN_DISABLE
- high: TEGRA_PIN_ENABLE
-- nvidia,schmitt: Integer. Enables Schmitt Trigger on the input.
- normal: TEGRA_PIN_DISABLE
- high: TEGRA_PIN_ENABLE
-- nvidia,drive-type: Integer. Valid range 0...3.
-- nvidia,pull-down-strength: Integer. Controls drive strength. 0 is weakest.
- The range of valid values depends on the pingroup. See "CAL_DRVDN" in the
- Tegra TRM.
-- nvidia,pull-up-strength: Integer. Controls drive strength. 0 is weakest.
- The range of valid values depends on the pingroup. See "CAL_DRVUP" in the
- Tegra TRM.
-
-Valid values for pin and group names (nvidia,pin) are:
-
- These correspond to Tegra PADCTL_* (pinmux) registers.
-
- Mux groups:
-
- These correspond to Tegra PADCTL_* (pinmux) registers. Any property
- that exists in those registers may be set for the following pin names.
-
- pex_l5_clkreq_n_pgg0, pex_l5_rst_n_pgg1
-
- Drive groups:
-
- These registers controls a single pin for which a mux group exists.
- See the list above for the pin name to use when configuring the pinmux.
-
- pex_l5_clkreq_n_pgg0, pex_l5_rst_n_pgg1
-
-Valid values for nvidia,functions are:
-
- pe5
-
-Power Domain:
- pex_l5_clkreq_n_pgg0 and pex_l5_rst_n_pgg1 are part of PCIE C5 power
- partition. Client devices must enable this partition before accessing
- these pins here.
-
-
-Example:
-
- tegra_pinctrl: pinmux: pinmux@2430000 {
- compatible = "nvidia,tegra194-pinmux";
- reg = <0x2430000 0x17000
- 0xc300000 0x4000>;
-
- pinctrl-names = "pex_rst";
- pinctrl-0 = <&pex_rst_c5_out_state>;
-
- pex_rst_c5_out_state: pex_rst_c5_out {
- pex_rst {
- nvidia,pins = "pex_l5_rst_n_pgg1";
- nvidia,schmitt = <TEGRA_PIN_DISABLE>;
- nvidia,lpdr = <TEGRA_PIN_ENABLE>;
- nvidia,enable-input = <TEGRA_PIN_DISABLE>;
- nvidia,io-hv = <TEGRA_PIN_ENABLE>;
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- };
- };
- };
new file mode 100644
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra194-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra194 Pinmux Controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+ compatible:
+ const: nvidia,tegra194-pinmux
+
+ reg:
+ items:
+ - description: APB_MISC_GP_*_PADCTRL registers (pad control)
+ - description: PINMUX_AUX_* registers (pinmux)
+
+patternProperties:
+ "^pinmux(-[a-z0-9-_]+)?$":
+ type: object
+ properties:
+ phandle: true
+
+ # pin groups
+ additionalProperties:
+ $ref: nvidia,tegra-pinmux-common.yaml
+ additionalProperties: false
+ properties:
+ nvidia,pins:
+ description: An array of strings. Each string contains the name of a
+ pin or group. Valid values for these names are listed below.
+
+ Note that the pex_l5_clkreq_n_pgg0 and pex_l5_rst_n_pgg1 pins are
+ part of PCIE C5 power partition. Client devices must enable this
+ partition before accessing the configuration for these pins.
+ items:
+ enum: [ pex_l5_clkreq_n_pgg0, pex_l5_rst_n_pgg1,
+ # drive groups
+ drive_pex_l5_clkreq_n_pgg0, drive_pex_l5_rst_n_pgg1 ]
+
+ nvidia,function:
+ enum: [ pe5 ]
+
+ nvidia,pull: true
+ nvidia,tristate: true
+ nvidia,schmitt: true
+ nvidia,enable-input: true
+ nvidia,open-drain: true
+ nvidia,lock: true
+ nvidia,drive-type: true
+ nvidia,io-hv: true
+
+ required:
+ - nvidia,pins
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/pinctrl-tegra.h>
+
+ pinmux@2430000 {
+ compatible = "nvidia,tegra194-pinmux";
+ reg = <0x2430000 0x17000>,
+ <0xc300000 0x04000>;
+
+ pinctrl-names = "pex_rst";
+ pinctrl-0 = <&pex_rst_c5_out_state>;
+
+ pex_rst_c5_out_state: pinmux-pex-rst-c5-out {
+ pex_rst {
+ nvidia,pins = "pex_l5_rst_n_pgg1";
+ nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ };
+ };
+ };
+...
deleted file mode 100644
@@ -1,143 +0,0 @@
-NVIDIA Tegra20 pinmux controller
-
-Required properties:
-- compatible: "nvidia,tegra20-pinmux"
-- reg: Should contain the register physical address and length for each of
- the tri-state, mux, pull-up/down, and pad control register sets.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-Tegra's pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, tristate, drive strength, etc.
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function or tristate parameter. For this
-reason, even seemingly boolean values are actually tristates in this binding:
-unspecified, off, or on. Unspecified is represented as an absent property,
-and off/on are represented as integer values 0 and 1.
-
-Required subnode-properties:
-- nvidia,pins : An array of strings. Each string contains the name of a pin or
- group. Valid values for these names are listed below.
-
-Optional subnode-properties:
-- nvidia,function: A string containing the name of the function to mux to the
- pin or group. Valid values for function names are listed below. See the Tegra
- TRM to determine which are valid for each pin or group.
-- nvidia,pull: Integer, representing the pull-down/up to apply to the pin.
- 0: none, 1: down, 2: up.
-- nvidia,tristate: Integer.
- 0: drive, 1: tristate.
-- nvidia,high-speed-mode: Integer. Enable high speed mode the pins.
- 0: no, 1: yes.
-- nvidia,schmitt: Integer. Enables Schmitt Trigger on the input.
- 0: no, 1: yes.
-- nvidia,low-power-mode: Integer. Valid values 0-3. 0 is least power, 3 is
- most power. Controls the drive power or current. See "Low Power Mode"
- or "LPMD1" and "LPMD0" in the Tegra TRM.
-- nvidia,pull-down-strength: Integer. Controls drive strength. 0 is weakest.
- The range of valid values depends on the pingroup. See "CAL_DRVDN" in the
- Tegra TRM.
-- nvidia,pull-up-strength: Integer. Controls drive strength. 0 is weakest.
- The range of valid values depends on the pingroup. See "CAL_DRVUP" in the
- Tegra TRM.
-- nvidia,slew-rate-rising: Integer. Controls rising signal slew rate. 0 is
- fastest. The range of valid values depends on the pingroup. See
- "DRVDN_SLWR" in the Tegra TRM.
-- nvidia,slew-rate-falling: Integer. Controls falling signal slew rate. 0 is
- fastest. The range of valid values depends on the pingroup. See
- "DRVUP_SLWF" in the Tegra TRM.
-
-Note that many of these properties are only valid for certain specific pins
-or groups. See the Tegra TRM and various pinmux spreadsheets for complete
-details regarding which groups support which functionality. The Linux pinctrl
-driver may also be a useful reference, since it consolidates, disambiguates,
-and corrects data from all those sources.
-
-Valid values for pin and group names are:
-
- mux groups:
-
- These all support nvidia,function, nvidia,tristate, and many support
- nvidia,pull.
-
- ata, atb, atc, atd, ate, cdev1, cdev2, crtp, csus, dap1, dap2, dap3, dap4,
- ddc, dta, dtb, dtc, dtd, dte, dtf, gma, gmb, gmc, gmd, gme, gpu, gpu7,
- gpv, hdint, i2cp, irrx, irtx, kbca, kbcb, kbcc, kbcd, kbce, kbcf, lcsn,
- ld0, ld1, ld2, ld3, ld4, ld5, ld6, ld7, ld8, ld9, ld10, ld11, ld12, ld13,
- ld14, ld15, ld16, ld17, ldc, ldi, lhp0, lhp1, lhp2, lhs, lm0, lm1, lpp,
- lpw0, lpw1, lpw2, lsc0, lsc1, lsck, lsda, lsdi, lspi, lvp0, lvp1, lvs,
- owc, pmc, pta, rm, sdb, sdc, sdd, sdio1, slxa, slxc, slxd, slxk, spdi,
- spdo, spia, spib, spic, spid, spie, spif, spig, spih, uaa, uab, uac, uad,
- uca, ucb, uda.
-
- tristate groups:
-
- These only support nvidia,pull.
-
- ck32, ddrc, pmca, pmcb, pmcc, pmcd, pmce, xm2c, xm2d, ls, lc, ld17_0,
- ld19_18, ld21_20, ld23_22.
-
- drive groups:
-
- With some exceptions, these support nvidia,high-speed-mode,
- nvidia,schmitt, nvidia,low-power-mode, nvidia,pull-down-strength,
- nvidia,pull-up-strength, nvidia,slew-rate-rising, nvidia,slew-rate-falling.
-
- drive_ao1, drive_ao2, drive_at1, drive_at2, drive_cdev1, drive_cdev2,
- drive_csus, drive_dap1, drive_dap2, drive_dap3, drive_dap4, drive_dbg,
- drive_lcd1, drive_lcd2, drive_sdmmc2, drive_sdmmc3, drive_spi, drive_uaa,
- drive_uab, drive_uart2, drive_uart3, drive_vi1, drive_vi2, drive_xm2a,
- drive_xm2c, drive_xm2d, drive_xm2clk, drive_sdio1, drive_crt, drive_ddc,
- drive_gma, drive_gmb, drive_gmc, drive_gmd, drive_gme, drive_owr,
- drive_uda.
-
-Valid values for nvidia,functions are:
-
- ahb_clk, apb_clk, audio_sync, crt, dap1, dap2, dap3, dap4, dap5,
- displaya, displayb, emc_test0_dll, emc_test1_dll, gmi, gmi_int,
- hdmi, i2cp, i2c1, i2c2, i2c3, ide, irda, kbc, mio, mipi_hs, nand,
- osc, owr, pcie, plla_out, pllc_out1, pllm_out1, pllp_out2, pllp_out3,
- pllp_out4, pwm, pwr_intr, pwr_on, rsvd1, rsvd2, rsvd3, rsvd4, rtck,
- sdio1, sdio2, sdio3, sdio4, sflash, spdif, spi1, spi2, spi2_alt,
- spi3, spi4, trace, twc, uarta, uartb, uartc, uartd, uarte, ulpi,
- vi, vi_sensor_clk, xio
-
-Example:
-
- pinctrl@70000000 {
- compatible = "nvidia,tegra20-pinmux";
- reg = < 0x70000014 0x10 /* Tri-state registers */
- 0x70000080 0x20 /* Mux registers */
- 0x700000a0 0x14 /* Pull-up/down registers */
- 0x70000868 0xa8 >; /* Pad control registers */
- };
-
-Example board file extract:
-
- pinctrl@70000000 {
- sdio4_default: sdio4_default {
- atb {
- nvidia,pins = "atb", "gma", "gme";
- nvidia,function = "sdio4";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- };
- };
- };
-
- sdhci@c8000600 {
- pinctrl-names = "default";
- pinctrl-0 = <&sdio4_default>;
- };
new file mode 100644
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra20-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra20 Pinmux Controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+ compatible:
+ const: nvidia,tegra20-pinmux
+
+ reg:
+ items:
+ - description: tri-state registers
+ - description: mux register
+ - description: pull-up/down registers
+ - description: pad control registers
+
+patternProperties:
+ "^pinmux(-[a-z0-9-_]+)?$":
+ type: object
+ properties:
+ phandle: true
+
+ # pin groups
+ additionalProperties:
+ $ref: nvidia,tegra-pinmux-common.yaml
+ additionalProperties: false
+ properties:
+ nvidia,pins:
+ items:
+ enum: [ ata, atb, atc, atd, ate, cdev1, cdev2, crtp, csus, dap1,
+ dap2, dap3, dap4, ddc, dta, dtb, dtc, dtd, dte, dtf, gma,
+ gmb, gmc, gmd, gme, gpu, gpu7, gpv, hdint, i2cp, irrx,
+ irtx, kbca, kbcb, kbcc, kbcd, kbce, kbcf, lcsn, ld0, ld1,
+ ld2, ld3, ld4, ld5, ld6, ld7, ld8, ld9, ld10, ld11, ld12,
+ ld13, ld14, ld15, ld16, ld17, ldc, ldi, lhp0, lhp1, lhp2,
+ lhs, lm0, lm1, lpp, lpw0, lpw1, lpw2, lsc0, lsc1, lsck,
+ lsda, lsdi, lspi, lvp0, lvp1, lvs, owc, pmc, pta, rm, sdb,
+ sdc, sdd, sdio1, slxa, slxc, slxd, slxk, spdi, spdo, spia,
+ spib, spic, spid, spie, spif, spig, spih, uaa, uab, uac,
+ uad, uca, ucb, uda,
+ # tristate groups
+ ck32, ddrc, pmca, pmcb, pmcc, pmcd, pmce, xm2c, xm2d, ls,
+ lc, ld17_0, ld19_18, ld21_20, ld23_22,
+ # drive groups
+ drive_ao1, drive_ao2, drive_at1, drive_at2, drive_cdev1,
+ drive_cdev2, drive_csus, drive_dap1, drive_dap2,
+ drive_dap3, drive_dap4, drive_dbg, drive_lcd1, drive_lcd2,
+ drive_sdmmc2, drive_sdmmc3, drive_spi, drive_uaa,
+ drive_uab, drive_uart2, drive_uart3, drive_vi1, drive_vi2,
+ drive_xm2a, drive_xm2c, drive_xm2d, drive_xm2clk,
+ drive_sdio1, drive_crt, drive_ddc, drive_gma, drive_gmb,
+ drive_gmc, drive_gmd, drive_gme, drive_owr, drive_uda ]
+
+ nvidia,function:
+ enum: [ ahb_clk, apb_clk, audio_sync, crt, dap1, dap2, dap3, dap4,
+ dap5, displaya, displayb, emc_test0_dll, emc_test1_dll, gmi,
+ gmi_int, hdmi, i2cp, i2c1, i2c2, i2c3, ide, irda, kbc, mio,
+ mipi_hs, nand, osc, owr, pcie, plla_out, pllc_out1,
+ pllm_out1, pllp_out2, pllp_out3, pllp_out4, pwm, pwr_intr,
+ pwr_on, rsvd1, rsvd2, rsvd3, rsvd4, rtck, sdio1, sdio2,
+ sdio3, sdio4, sflash, spdif, spi1, spi2, spi2_alt, spi3,
+ spi4, trace, twc, uarta, uartb, uartc, uartd, uarte, ulpi,
+ vi, vi_sensor_clk, xio ]
+
+ nvidia,pull: true
+ nvidia,tristate: true
+ nvidia,schmitt: true
+ nvidia,pull-down-strength: true
+ nvidia,pull-up-strength: true
+ nvidia,high-speed-mode: true
+ nvidia,low-power-mode: true
+ nvidia,slew-rate-rising: true
+ nvidia,slew-rate-falling: true
+
+ required:
+ - nvidia,pins
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra20-car.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ pinctrl@70000000 {
+ compatible = "nvidia,tegra20-pinmux";
+ reg = <0x70000014 0x10>, /* Tri-state registers */
+ <0x70000080 0x20>, /* Mux registers */
+ <0x700000a0 0x14>, /* Pull-up/down registers */
+ <0x70000868 0xa8>; /* Pad control registers */
+
+ pinmux {
+ atb {
+ nvidia,pins = "atb", "gma", "gme";
+ nvidia,function = "sdio4";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+ };
+ };
+...
deleted file mode 100644
@@ -1,166 +0,0 @@
-NVIDIA Tegra210 pinmux controller
-
-Required properties:
-- compatible: "nvidia,tegra210-pinmux"
-- reg: Should contain a list of base address and size pairs for:
- - first entry: The APB_MISC_GP_*_PADCTRL registers (pad control)
- - second entry: The PINMUX_AUX_* registers (pinmux)
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-Tegra's pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, tristate, drive strength, etc.
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function or tristate parameter. For this
-reason, even seemingly boolean values are actually tristates in this binding:
-unspecified, off, or on. Unspecified is represented as an absent property,
-and off/on are represented as integer values 0 and 1.
-
-See the TRM to determine which properties and values apply to each pin/group.
-Macro values for property values are defined in
-include/dt-binding/pinctrl/pinctrl-tegra.h.
-
-Required subnode-properties:
-- nvidia,pins : An array of strings. Each string contains the name of a pin or
- group. Valid values for these names are listed below.
-
-Optional subnode-properties:
-- nvidia,function: A string containing the name of the function to mux to the
- pin or group.
-- nvidia,pull: Integer, representing the pull-down/up to apply to the pin.
- 0: none, 1: down, 2: up.
-- nvidia,tristate: Integer.
- 0: drive, 1: tristate.
-- nvidia,enable-input: Integer. Enable the pin's input path.
- enable :TEGRA_PIN_ENABLE and
- disable or output only: TEGRA_PIN_DISABLE.
-- nvidia,open-drain: Integer.
- enable: TEGRA_PIN_ENABLE.
- disable: TEGRA_PIN_DISABLE.
-- nvidia,lock: Integer. Lock the pin configuration against further changes
- until reset.
- enable: TEGRA_PIN_ENABLE.
- disable: TEGRA_PIN_DISABLE.
-- nvidia,io-hv: Integer. Select high-voltage receivers.
- normal: TEGRA_PIN_DISABLE
- high: TEGRA_PIN_ENABLE
-- nvidia,high-speed-mode: Integer. Enable high speed mode the pins.
- normal: TEGRA_PIN_DISABLE
- high: TEGRA_PIN_ENABLE
-- nvidia,schmitt: Integer. Enables Schmitt Trigger on the input.
- normal: TEGRA_PIN_DISABLE
- high: TEGRA_PIN_ENABLE
-- nvidia,drive-type: Integer. Valid range 0...3.
-- nvidia,pull-down-strength: Integer. Controls drive strength. 0 is weakest.
- The range of valid values depends on the pingroup. See "CAL_DRVDN" in the
- Tegra TRM.
-- nvidia,pull-up-strength: Integer. Controls drive strength. 0 is weakest.
- The range of valid values depends on the pingroup. See "CAL_DRVUP" in the
- Tegra TRM.
-- nvidia,slew-rate-rising: Integer. Controls rising signal slew rate. 0 is
- fastest. The range of valid values depends on the pingroup. See
- "DRVDN_SLWR" in the Tegra TRM.
-- nvidia,slew-rate-falling: Integer. Controls falling signal slew rate. 0 is
- fastest. The range of valid values depends on the pingroup. See
- "DRVUP_SLWF" in the Tegra TRM.
-
-Valid values for pin and group names (nvidia,pin) are:
-
- Mux groups:
-
- These correspond to Tegra PINMUX_AUX_* (pinmux) registers. Any property
- that exists in those registers may be set for the following pin names.
-
- In Tegra210, many pins also have a dedicated APB_MISC_GP_*_PADCTRL
- register. Where that is true, and property that exists in that register
- may also be set on the following pin names.
-
- als_prox_int_px3, ap_ready_pv5, ap_wake_bt_ph3, ap_wake_nfc_ph7,
- aud_mclk_pbb0, batt_bcl, bt_rst_ph4, bt_wake_ap_ph5, button_home_py1,
- button_power_on_px5, button_slide_sw_py0, button_vol_down_px7,
- button_vol_up_px6, cam1_mclk_ps0, cam1_pwdn_ps7, cam1_strobe_pt1,
- cam2_mclk_ps1, cam2_pwdn_pt0, cam_af_en_ps5, cam_flash_en_ps6,
- cam_i2c_scl_ps2, cam_i2c_sda_ps3, cam_rst_ps4cam_rst_ps4, clk_32k_in,
- clk_32k_out_py5, clk_req, core_pwr_req, cpu_pwr_req, dap1_din_pb1,
- dap1_dout_pb2, dap1_fs_pb0, dap1_sclk_pb3, dap2_din_paa2, dap2_dout_paa3,
- dap2_fs_paa0, dap2_sclk_paa1, dap4_din_pj5, dap4_dout_pj6, dap4_fs_pj4,
- dap4_sclk_pj7, dmic1_clk_pe0, dmic1_dat_pe1, dmic2_clk_pe2, dmic2_dat_pe3,
- dmic3_clk_pe4, dmic3_dat_pe5, dp_hpd0_pcc6, dvfs_clk_pbb2, dvfs_pwm_pbb1,
- gen1_i2c_scl_pj1, gen1_i2c_sda_pj0, gen2_i2c_scl_pj2, gen2_i2c_sda_pj3,
- gen3_i2c_scl_pf0, gen3_i2c_sda_pf1, gpio_x1_aud_pbb3, gpio_x3_aud_pbb4,
- gps_en_pi2, gps_rst_pi3, hdmi_cec_pcc0, hdmi_int_dp_hpd_pcc1, jtag_rtck,
- lcd_bl_en_pv1, lcd_bl_pwm_pv0, lcd_gpio1_pv3, lcd_gpio2_pv4, lcd_rst_pv2,
- lcd_te_py2, modem_wake_ap_px0, motion_int_px2, nfc_en_pi0, nfc_int_pi1,
- pa6, pcc7, pe6, pe7, pex_l0_clkreq_n_pa1, pex_l0_rst_n_pa0,
- pex_l1_clkreq_n_pa4, pex_l1_rst_n_pa3, pex_wake_n_pa2, ph6, pk0, pk1, pk2,
- pk3, pk4, pk5, pk6, pk7, pl0, pl1, pwr_i2c_scl_py3, pwr_i2c_sda_py4,
- pwr_int_n, pz0, pz1, pz2, pz3, pz4, pz5, qspi_cs_n_pee1, qspi_io0_pee2,
- qspi_io1_pee3, qspi_io2_pee4, qspi_io3_pee5, qspi_sck_pee0,
- sata_led_active_pa5, sdmmc1_clk_pm0, sdmmc1_cmd_pm1, sdmmc1_dat0_pm5,
- sdmmc1_dat1_pm4, sdmmc1_dat2_pm3, sdmmc1_dat3_pm2, sdmmc3_clk_pp0,
- sdmmc3_cmd_pp1, sdmmc3_dat0_pp5, sdmmc3_dat1_pp4, sdmmc3_dat2_pp3,
- sdmmc3_dat3_pp2, shutdown, spdif_in_pcc3, spdif_out_pcc2, spi1_cs0_pc3,
- spi1_cs1_pc4, spi1_miso_pc1, spi1_mosi_pc0, spi1_sck_pc2, spi2_cs0_pb7,
- spi2_cs1_pdd0, spi2_miso_pb5, spi2_mosi_pb4, spi2_sck_pb6, spi4_cs0_pc6,
- spi4_miso_pd0, spi4_mosi_pc7, spi4_sck_pc5, temp_alert_px4, touch_clk_pv7,
- touch_int_px1, touch_rst_pv6, uart1_cts_pu3, uart1_rts_pu2, uart1_rx_pu1,
- uart1_tx_pu0, uart2_cts_pg3, uart2_rts_pg2, uart2_rx_pg1, uart2_tx_pg0,
- uart3_cts_pd4, uart3_rts_pd3, uart3_rx_pd2, uart3_tx_pd1, uart4_cts_pi7,
- uart4_rts_pi6, uart4_rx_pi5, uart4_tx_pi4, usb_vbus_en0_pcc4,
- usb_vbus_en1_pcc5, wifi_en_ph0, wifi_rst_ph1, wifi_wake_ap_ph2
-
- Drive groups:
-
- These correspond to the Tegra APB_MISC_GP_*_PADCTRL (pad control)
- registers. Note that where one of these registers controls a single pin
- for which a PINMUX_AUX_* exists, see the list above for the pin name to
- use when configuring the pinmux.
-
- pa6, pcc7, pe6, pe7, ph6, pk0, pk1, pk2, pk3, pk4, pk5, pk6, pk7, pl0, pl1,
- pz0, pz1, pz2, pz3, pz4, pz5, sdmmc1, sdmmc2, sdmmc3, sdmmc4
-
-Valid values for nvidia,functions are:
-
- aud, bcl, blink, ccla, cec, cldvfs, clk, core, cpu, displaya, displayb,
- dmic1, dmic2, dmic3, dp, dtv, extperiph3, i2c1, i2c2, i2c3, i2cpmu, i2cvi,
- i2s1, i2s2, i2s3, i2s4a, i2s4b, i2s5a, i2s5b, iqc0, iqc1, jtag, pe, pe0,
- pe1, pmi, pwm0, pwm1, pwm2, pwm3, qspi, rsvd0, rsvd1, rsvd2, rsvd3, sata,
- sdmmc1, sdmmc3, shutdown, soc, sor0, sor1, spdif, spi1, spi2, spi3, spi4,
- sys, touch, uart, uarta, uartb, uartc, uartd, usb, vgp1, vgp2, vgp3, vgp4,
- vgp5, vgp6, vimclk, vimclk2
-
-Example:
-
- pinmux: pinmux@70000800 {
- compatible = "nvidia,tegra210-pinmux";
- reg = <0x0 0x700008d4 0x0 0x2a8>, /* Pad control registers */
- <0x0 0x70003000 0x0 0x1000>; /* Mux registers */
-
- pinctrl-names = "boot";
- pinctrl-0 = <&state_boot>;
-
- state_boot: pinmux {
- gen1_i2c_scl_pj1 {
- nvidia,pins = "gen1_i2c_scl_pj1",
- nvidia,function = "i2c1";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
- nvidia,enable-input = <TEGRA_PIN_ENABLE>;
- nvidia,open-drain = <TEGRA_PIN_ENABLE>;
- nvidia,io-hv = <TEGRA_PIN_ENABLE>;
- };
- };
- };
-};
new file mode 100644
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra210-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra210 Pinmux Controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+ compatible:
+ const: nvidia,tegra210-pinmux
+
+ reg:
+ items:
+ - description: APB_MISC_GP_*_PADCTRL register (pad control)
+ - description: PINMUX_AUX_* registers (pinmux)
+
+patternProperties:
+ "^pinmux(-[a-z0-9-_]+)?$":
+ type: object
+ properties:
+ phandle: true
+
+ # pin groups
+ additionalProperties:
+ $ref: nvidia,tegra-pinmux-common.yaml
+ additionalProperties: false
+ properties:
+ nvidia,pins:
+ items:
+ enum: [ als_prox_int_px3, ap_ready_pv5, ap_wake_bt_ph3,
+ ap_wake_nfc_ph7, aud_mclk_pbb0, batt_bcl, bt_rst_ph4,
+ bt_wake_ap_ph5, button_home_py1, button_power_on_px5,
+ button_slide_sw_py0, button_vol_down_px7,
+ button_vol_up_px6, cam1_mclk_ps0, cam1_pwdn_ps7,
+ cam1_strobe_pt1, cam2_mclk_ps1, cam2_pwdn_pt0,
+ cam_af_en_ps5, cam_flash_en_ps6, cam_i2c_scl_ps2,
+ cam_i2c_sda_ps3, cam_rst_ps4, clk_32k_in, clk_32k_out_py5,
+ clk_req, core_pwr_req, cpu_pwr_req, dap1_din_pb1,
+ dap1_dout_pb2, dap1_fs_pb0, dap1_sclk_pb3, dap2_din_paa2,
+ dap2_dout_paa3, dap2_fs_paa0, dap2_sclk_paa1, dap4_din_pj5,
+ dap4_dout_pj6, dap4_fs_pj4, dap4_sclk_pj7, dmic1_clk_pe0,
+ dmic1_dat_pe1, dmic2_clk_pe2, dmic2_dat_pe3, dmic3_clk_pe4,
+ dmic3_dat_pe5, dp_hpd0_pcc6, dvfs_clk_pbb2, dvfs_pwm_pbb1,
+ gen1_i2c_scl_pj1, gen1_i2c_sda_pj0, gen2_i2c_scl_pj2,
+ gen2_i2c_sda_pj3, gen3_i2c_scl_pf0, gen3_i2c_sda_pf1,
+ gpio_x1_aud_pbb3, gpio_x3_aud_pbb4, gps_en_pi2,
+ gps_rst_pi3, hdmi_cec_pcc0, hdmi_int_dp_hpd_pcc1,
+ jtag_rtck, lcd_bl_en_pv1, lcd_bl_pwm_pv0, lcd_gpio1_pv3,
+ lcd_gpio2_pv4, lcd_rst_pv2, lcd_te_py2, modem_wake_ap_px0,
+ motion_int_px2, nfc_en_pi0, nfc_int_pi1, pa6, pcc7, pe6,
+ pe7, pex_l0_clkreq_n_pa1, pex_l0_rst_n_pa0,
+ pex_l1_clkreq_n_pa4, pex_l1_rst_n_pa3, pex_wake_n_pa2, ph6,
+ pk0, pk1, pk2, pk3, pk4, pk5, pk6, pk7, pl0, pl1,
+ pwr_i2c_scl_py3, pwr_i2c_sda_py4, pwr_int_n, pz0, pz1, pz2,
+ pz3, pz4, pz5, qspi_cs_n_pee1, qspi_io0_pee2,
+ qspi_io1_pee3, qspi_io2_pee4, qspi_io3_pee5, qspi_sck_pee0,
+ sata_led_active_pa5, sdmmc1_clk_pm0, sdmmc1_cmd_pm1,
+ sdmmc1_dat0_pm5, sdmmc1_dat1_pm4, sdmmc1_dat2_pm3,
+ sdmmc1_dat3_pm2, sdmmc3_clk_pp0, sdmmc3_cmd_pp1,
+ sdmmc3_dat0_pp5, sdmmc3_dat1_pp4, sdmmc3_dat2_pp3,
+ sdmmc3_dat3_pp2, shutdown, spdif_in_pcc3, spdif_out_pcc2,
+ spi1_cs0_pc3, spi1_cs1_pc4, spi1_miso_pc1, spi1_mosi_pc0,
+ spi1_sck_pc2, spi2_cs0_pb7, spi2_cs1_pdd0, spi2_miso_pb5,
+ spi2_mosi_pb4, spi2_sck_pb6, spi4_cs0_pc6, spi4_miso_pd0,
+ spi4_mosi_pc7, spi4_sck_pc5, temp_alert_px4, touch_clk_pv7,
+ touch_int_px1, touch_rst_pv6, uart1_cts_pu3, uart1_rts_pu2,
+ uart1_rx_pu1, uart1_tx_pu0, uart2_cts_pg3, uart2_rts_pg2,
+ uart2_rx_pg1, uart2_tx_pg0, uart3_cts_pd4, uart3_rts_pd3,
+ uart3_rx_pd2, uart3_tx_pd1, uart4_cts_pi7, uart4_rts_pi6,
+ uart4_rx_pi5, uart4_tx_pi4, usb_vbus_en0_pcc4,
+ usb_vbus_en1_pcc5, wifi_en_ph0, wifi_rst_ph1,
+ wifi_wake_ap_ph2,
+ # drive groups
+ drive_pa6, drive_pcc7, drive_pe6, drive_pe7, drive_ph6,
+ drive_pk0, drive_pk1, drive_pk2, drive_pk3, drive_pk4,
+ drive_pk5, drive_pk6, drive_pk7, drive_pl0, drive_pl1,
+ drive_pz0, drive_pz1, drive_pz2, drive_pz3, drive_pz4,
+ drive_pz5, drive_sdmmc1, drive_sdmmc2, drive_sdmmc3,
+ drive_sdmmc4 ]
+
+ nvidia,function:
+ enum: [ aud, bcl, blink, ccla, cec, cldvfs, clk, core, cpu, displaya,
+ displayb, dmic1, dmic2, dmic3, dp, dtv, extperiph3, i2c1,
+ i2c2, i2c3, i2cpmu, i2cvi, i2s1, i2s2, i2s3, i2s4a, i2s4b,
+ i2s5a, i2s5b, iqc0, iqc1, jtag, pe, pe0, pe1, pmi, pwm0,
+ pwm1, pwm2, pwm3, qspi, rsvd0, rsvd1, rsvd2, rsvd3, sata,
+ sdmmc1, sdmmc3, shutdown, soc, sor0, sor1, spdif, spi1, spi2,
+ spi3, spi4, sys, touch, uart, uarta, uartb, uartc, uartd,
+ usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, vimclk, vimclk2 ]
+
+ nvidia,pull: true
+ nvidia,tristate: true
+ nvidia,pull-down-strength: true
+ nvidia,pull-up-strength: true
+ nvidia,high-speed-mode: true
+ nvidia,enable-input: true
+ nvidia,open-drain: true
+ nvidia,lock: true
+ nvidia,drive-type: true
+ nvidia,io-hv: true
+ nvidia,slew-rate-rising: true
+ nvidia,slew-rate-falling: true
+
+ required:
+ - nvidia,pins
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/pinctrl-tegra.h>
+
+ pinmux: pinmux@70000800 {
+ compatible = "nvidia,tegra210-pinmux";
+ reg = <0x700008d4 0x02a8>, /* Pad control registers */
+ <0x70003000 0x1000>; /* Mux registers */
+
+ pinctrl-names = "boot";
+ pinctrl-0 = <&state_boot>;
+
+ state_boot: pinmux {
+ gen1_i2c_scl_pj1 {
+ nvidia,pins = "gen1_i2c_scl_pj1";
+ nvidia,function = "i2c1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+ };
+ };
+ };
+...
deleted file mode 100644
@@ -1,144 +0,0 @@
-NVIDIA Tegra30 pinmux controller
-
-The Tegra30 pinctrl binding is very similar to the Tegra20 pinctrl binding,
-as described in nvidia,tegra20-pinmux.txt. In fact, this document assumes
-that binding as a baseline, and only documents the differences between the
-two bindings.
-
-Required properties:
-- compatible: "nvidia,tegra30-pinmux"
-- reg: Should contain the register physical address and length for each of
- the pad control and mux registers.
-
-Tegra30 adds the following optional properties for pin configuration subnodes:
-- nvidia,enable-input: Integer. Enable the pin's input path. 0: no, 1: yes.
-- nvidia,open-drain: Integer. Enable open drain mode. 0: no, 1: yes.
-- nvidia,lock: Integer. Lock the pin configuration against further changes
- until reset. 0: no, 1: yes.
-- nvidia,io-reset: Integer. Reset the IO path. 0: no, 1: yes.
-
-As with Tegra20, see the Tegra TRM for complete details regarding which groups
-support which functionality.
-
-Valid values for pin and group names are:
-
- per-pin mux groups:
-
- These all support nvidia,function, nvidia,tristate, nvidia,pull,
- nvidia,enable-input, nvidia,lock. Some support nvidia,open-drain,
- nvidia,io-reset.
-
- clk_32k_out_pa0, uart3_cts_n_pa1, dap2_fs_pa2, dap2_sclk_pa3,
- dap2_din_pa4, dap2_dout_pa5, sdmmc3_clk_pa6, sdmmc3_cmd_pa7, gmi_a17_pb0,
- gmi_a18_pb1, lcd_pwr0_pb2, lcd_pclk_pb3, sdmmc3_dat3_pb4, sdmmc3_dat2_pb5,
- sdmmc3_dat1_pb6, sdmmc3_dat0_pb7, uart3_rts_n_pc0, lcd_pwr1_pc1,
- uart2_txd_pc2, uart2_rxd_pc3, gen1_i2c_scl_pc4, gen1_i2c_sda_pc5,
- lcd_pwr2_pc6, gmi_wp_n_pc7, sdmmc3_dat5_pd0, sdmmc3_dat4_pd1, lcd_dc1_pd2,
- sdmmc3_dat6_pd3, sdmmc3_dat7_pd4, vi_d1_pd5, vi_vsync_pd6, vi_hsync_pd7,
- lcd_d0_pe0, lcd_d1_pe1, lcd_d2_pe2, lcd_d3_pe3, lcd_d4_pe4, lcd_d5_pe5,
- lcd_d6_pe6, lcd_d7_pe7, lcd_d8_pf0, lcd_d9_pf1, lcd_d10_pf2, lcd_d11_pf3,
- lcd_d12_pf4, lcd_d13_pf5, lcd_d14_pf6, lcd_d15_pf7, gmi_ad0_pg0,
- gmi_ad1_pg1, gmi_ad2_pg2, gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5,
- gmi_ad6_pg6, gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2,
- gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6, gmi_ad15_ph7,
- gmi_wr_n_pi0, gmi_oe_n_pi1, gmi_dqs_pi2, gmi_cs6_n_pi3, gmi_rst_n_pi4,
- gmi_iordy_pi5, gmi_cs7_n_pi6, gmi_wait_pi7, gmi_cs0_n_pj0, lcd_de_pj1,
- gmi_cs1_n_pj2, lcd_hsync_pj3, lcd_vsync_pj4, uart2_cts_n_pj5,
- uart2_rts_n_pj6, gmi_a16_pj7, gmi_adv_n_pk0, gmi_clk_pk1, gmi_cs4_n_pk2,
- gmi_cs2_n_pk3, gmi_cs3_n_pk4, spdif_out_pk5, spdif_in_pk6, gmi_a19_pk7,
- vi_d2_pl0, vi_d3_pl1, vi_d4_pl2, vi_d5_pl3, vi_d6_pl4, vi_d7_pl5,
- vi_d8_pl6, vi_d9_pl7, lcd_d16_pm0, lcd_d17_pm1, lcd_d18_pm2, lcd_d19_pm3,
- lcd_d20_pm4, lcd_d21_pm5, lcd_d22_pm6, lcd_d23_pm7, dap1_fs_pn0,
- dap1_din_pn1, dap1_dout_pn2, dap1_sclk_pn3, lcd_cs0_n_pn4, lcd_sdout_pn5,
- lcd_dc0_pn6, hdmi_int_pn7, ulpi_data7_po0, ulpi_data0_po1, ulpi_data1_po2,
- ulpi_data2_po3, ulpi_data3_po4, ulpi_data4_po5, ulpi_data5_po6,
- ulpi_data6_po7, dap3_fs_pp0, dap3_din_pp1, dap3_dout_pp2, dap3_sclk_pp3,
- dap4_fs_pp4, dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7, kb_col0_pq0,
- kb_col1_pq1, kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5,
- kb_col6_pq6, kb_col7_pq7, kb_row0_pr0, kb_row1_pr1, kb_row2_pr2,
- kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, kb_row7_pr7,
- kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_row11_ps3, kb_row12_ps4,
- kb_row13_ps5, kb_row14_ps6, kb_row15_ps7, vi_pclk_pt0, vi_mclk_pt1,
- vi_d10_pt2, vi_d11_pt3, vi_d0_pt4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6,
- sdmmc4_cmd_pt7, pu0, pu1, pu2, pu3, pu4, pu5, pu6, jtag_rtck_pu7, pv0,
- pv1, pv2, pv3, ddc_scl_pv4, ddc_sda_pv5, crt_hsync_pv6, crt_vsync_pv7,
- lcd_cs1_n_pw0, lcd_m1_pw1, spi2_cs1_n_pw2, spi2_cs2_n_pw3, clk1_out_pw4,
- clk2_out_pw5, uart3_txd_pw6, uart3_rxd_pw7, spi2_mosi_px0, spi2_miso_px1,
- spi2_sck_px2, spi2_cs0_n_px3, spi1_mosi_px4, spi1_sck_px5, spi1_cs0_n_px6,
- spi1_miso_px7, ulpi_clk_py0, ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3,
- sdmmc1_dat3_py4, sdmmc1_dat2_py5, sdmmc1_dat1_py6, sdmmc1_dat0_py7,
- sdmmc1_clk_pz0, sdmmc1_cmd_pz1, lcd_sdin_pz2, lcd_wr_n_pz3, lcd_sck_pz4,
- sys_clk_req_pz5, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, sdmmc4_dat0_paa0,
- sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, sdmmc4_dat4_paa4,
- sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, sdmmc4_dat7_paa7, pbb0,
- cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, pbb7,
- cam_mclk_pcc0, pcc1, pcc2, sdmmc4_rst_n_pcc3, sdmmc4_clk_pcc4,
- clk2_req_pcc5, pex_l2_rst_n_pcc6, pex_l2_clkreq_n_pcc7,
- pex_l0_prsnt_n_pdd0, pex_l0_rst_n_pdd1, pex_l0_clkreq_n_pdd2,
- pex_wake_n_pdd3, pex_l1_prsnt_n_pdd4, pex_l1_rst_n_pdd5,
- pex_l1_clkreq_n_pdd6, pex_l2_prsnt_n_pdd7, clk3_out_pee0, clk3_req_pee1,
- clk1_req_pee2, hdmi_cec_pee3, clk_32k_in, core_pwr_req, cpu_pwr_req, owr,
- pwr_int_n.
-
- drive groups:
-
- These all support nvidia,pull-down-strength, nvidia,pull-up-strength,
- nvidia,slew-rate-rising, nvidia,slew-rate-falling. Most but not all
- support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode.
-
- ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, cec, crt, csus, dap1,
- dap2, dap3, dap4, dbg, ddc, dev3, gma, gmb, gmc, gmd, gme, gmf, gmg,
- gmh, gpv, lcd1, lcd2, owr, sdio1, sdio2, sdio3, spi, uaa, uab, uart2,
- uart3, uda, vi1.
-
-Valid values for nvidia,functions are:
-
- blink, cec, clk_12m_out, clk_32k_in, core_pwr_req, cpu_pwr_req, crt,
- dap, ddr, dev3, displaya, displayb, dtv, extperiph1, extperiph2,
- extperiph3, gmi, gmi_alt, hda, hdcp, hdmi, hsi, i2c1, i2c2, i2c3,
- i2c4, i2cpwr, i2s0, i2s1, i2s2, i2s3, i2s4, invalid, kbc, mio, nand,
- nand_alt, owr, pcie, pwm0, pwm1, pwm2, pwm3, pwr_int_n, rsvd1, rsvd2,
- rsvd3, rsvd4, rtck, sata, sdmmc1, sdmmc2, sdmmc3, sdmmc4, spdif, spi1,
- spi2, spi2_alt, spi3, spi4, spi5, spi6, sysclk, test, trace, uarta,
- uartb, uartc, uartd, uarte, ulpi, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6,
- vi, vi_alt1, vi_alt2, vi_alt3
-
-Example:
-
- pinctrl@70000000 {
- compatible = "nvidia,tegra30-pinmux";
- reg = < 0x70000868 0xd0 /* Pad control registers */
- 0x70003000 0x3e0 >; /* Mux registers */
- };
-
-Example board file extract:
-
- pinctrl@70000000 {
- sdmmc4_default: pinmux {
- sdmmc4_clk_pcc4 {
- nvidia,pins = "sdmmc4_clk_pcc4",
- "sdmmc4_rst_n_pcc3";
- nvidia,function = "sdmmc4";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- };
- sdmmc4_dat0_paa0 {
- nvidia,pins = "sdmmc4_dat0_paa0",
- "sdmmc4_dat1_paa1",
- "sdmmc4_dat2_paa2",
- "sdmmc4_dat3_paa3",
- "sdmmc4_dat4_paa4",
- "sdmmc4_dat5_paa5",
- "sdmmc4_dat6_paa6",
- "sdmmc4_dat7_paa7";
- nvidia,function = "sdmmc4";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
- };
- };
- };
-
- sdhci@78000400 {
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc4_default>;
- };
new file mode 100644
@@ -0,0 +1,176 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra30-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra30 pinmux Controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+ compatible:
+ const: nvidia,tegra30-pinmux
+
+ reg:
+ items:
+ - description: pad control registers
+ - description: mux registers
+
+patternProperties:
+ "^pinmux(-[a-z0-9-_]+)?$":
+ type: object
+ properties:
+ phandle: true
+
+ # pin groups
+ additionalProperties:
+ $ref: nvidia,tegra-pinmux-common.yaml
+ additionalProperties: false
+ properties:
+ nvidia,pins:
+ items:
+ enum: [ clk_32k_out_pa0, uart3_cts_n_pa1, dap2_fs_pa2,
+ dap2_sclk_pa3, dap2_din_pa4, dap2_dout_pa5, sdmmc3_clk_pa6,
+ sdmmc3_cmd_pa7, gmi_a17_pb0, gmi_a18_pb1, lcd_pwr0_pb2,
+ lcd_pclk_pb3, sdmmc3_dat3_pb4, sdmmc3_dat2_pb5,
+ sdmmc3_dat1_pb6, sdmmc3_dat0_pb7, uart3_rts_n_pc0,
+ lcd_pwr1_pc1, uart2_txd_pc2, uart2_rxd_pc3,
+ gen1_i2c_scl_pc4, gen1_i2c_sda_pc5, lcd_pwr2_pc6,
+ gmi_wp_n_pc7, sdmmc3_dat5_pd0, sdmmc3_dat4_pd1,
+ lcd_dc1_pd2, sdmmc3_dat6_pd3, sdmmc3_dat7_pd4, vi_d1_pd5,
+ vi_vsync_pd6, vi_hsync_pd7, lcd_d0_pe0, lcd_d1_pe1,
+ lcd_d2_pe2, lcd_d3_pe3, lcd_d4_pe4, lcd_d5_pe5, lcd_d6_pe6,
+ lcd_d7_pe7, lcd_d8_pf0, lcd_d9_pf1, lcd_d10_pf2,
+ lcd_d11_pf3, lcd_d12_pf4, lcd_d13_pf5, lcd_d14_pf6,
+ lcd_d15_pf7, gmi_ad0_pg0, gmi_ad1_pg1, gmi_ad2_pg2,
+ gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5, gmi_ad6_pg6,
+ gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2,
+ gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6,
+ gmi_ad15_ph7, gmi_wr_n_pi0, gmi_oe_n_pi1, gmi_dqs_pi2,
+ gmi_cs6_n_pi3, gmi_rst_n_pi4, gmi_iordy_pi5, gmi_cs7_n_pi6,
+ gmi_wait_pi7, gmi_cs0_n_pj0, lcd_de_pj1, gmi_cs1_n_pj2,
+ lcd_hsync_pj3, lcd_vsync_pj4, uart2_cts_n_pj5,
+ uart2_rts_n_pj6, gmi_a16_pj7, gmi_adv_n_pk0, gmi_clk_pk1,
+ gmi_cs4_n_pk2, gmi_cs2_n_pk3, gmi_cs3_n_pk4, spdif_out_pk5,
+ spdif_in_pk6, gmi_a19_pk7, vi_d2_pl0, vi_d3_pl1, vi_d4_pl2,
+ vi_d5_pl3, vi_d6_pl4, vi_d7_pl5, vi_d8_pl6, vi_d9_pl7,
+ lcd_d16_pm0, lcd_d17_pm1, lcd_d18_pm2, lcd_d19_pm3,
+ lcd_d20_pm4, lcd_d21_pm5, lcd_d22_pm6, lcd_d23_pm7,
+ dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2, dap1_sclk_pn3,
+ lcd_cs0_n_pn4, lcd_sdout_pn5, lcd_dc0_pn6, hdmi_int_pn7,
+ ulpi_data7_po0, ulpi_data0_po1, ulpi_data1_po2,
+ ulpi_data2_po3, ulpi_data3_po4, ulpi_data4_po5,
+ ulpi_data5_po6, ulpi_data6_po7, dap3_fs_pp0, dap3_din_pp1,
+ dap3_dout_pp2, dap3_sclk_pp3, dap4_fs_pp4, dap4_din_pp5,
+ dap4_dout_pp6, dap4_sclk_pp7, kb_col0_pq0, kb_col1_pq1,
+ kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5,
+ kb_col6_pq6, kb_col7_pq7, kb_row0_pr0, kb_row1_pr1,
+ kb_row2_pr2, kb_row3_pr3, kb_row4_pr4, kb_row5_pr5,
+ kb_row6_pr6, kb_row7_pr7, kb_row8_ps0, kb_row9_ps1,
+ kb_row10_ps2, kb_row11_ps3, kb_row12_ps4, kb_row13_ps5,
+ kb_row14_ps6, kb_row15_ps7, vi_pclk_pt0, vi_mclk_pt1,
+ vi_d10_pt2, vi_d11_pt3, vi_d0_pt4, gen2_i2c_scl_pt5,
+ gen2_i2c_sda_pt6, sdmmc4_cmd_pt7, pu0, pu1, pu2, pu3, pu4,
+ pu5, pu6, jtag_rtck_pu7, pv0, pv1, pv2, pv3, ddc_scl_pv4,
+ ddc_sda_pv5, crt_hsync_pv6, crt_vsync_pv7, lcd_cs1_n_pw0,
+ lcd_m1_pw1, spi2_cs1_n_pw2, spi2_cs2_n_pw3, clk1_out_pw4,
+ clk2_out_pw5, uart3_txd_pw6, uart3_rxd_pw7, spi2_mosi_px0,
+ spi2_miso_px1, spi2_sck_px2, spi2_cs0_n_px3, spi1_mosi_px4,
+ spi1_sck_px5, spi1_cs0_n_px6, spi1_miso_px7, ulpi_clk_py0,
+ ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3, sdmmc1_dat3_py4,
+ sdmmc1_dat2_py5, sdmmc1_dat1_py6, sdmmc1_dat0_py7,
+ sdmmc1_clk_pz0, sdmmc1_cmd_pz1, lcd_sdin_pz2, lcd_wr_n_pz3,
+ lcd_sck_pz4, sys_clk_req_pz5, pwr_i2c_scl_pz6,
+ pwr_i2c_sda_pz7, sdmmc4_dat0_paa0, sdmmc4_dat1_paa1,
+ sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, sdmmc4_dat4_paa4,
+ sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, sdmmc4_dat7_paa7, pbb0,
+ cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6,
+ pbb7, cam_mclk_pcc0, pcc1, pcc2, sdmmc4_rst_n_pcc3,
+ sdmmc4_clk_pcc4, clk2_req_pcc5, pex_l2_rst_n_pcc6,
+ pex_l2_clkreq_n_pcc7, pex_l0_prsnt_n_pdd0,
+ pex_l0_rst_n_pdd1, pex_l0_clkreq_n_pdd2, pex_wake_n_pdd3,
+ pex_l1_prsnt_n_pdd4, pex_l1_rst_n_pdd5,
+ pex_l1_clkreq_n_pdd6, pex_l2_prsnt_n_pdd7, clk3_out_pee0,
+ clk3_req_pee1, clk1_req_pee2, hdmi_cec_pee3, clk_32k_in,
+ core_pwr_req, cpu_pwr_req, owr, pwr_int_n,
+ # drive groups
+ drive_ao1, drive_ao2, drive_at1, drive_at2, drive_at3,
+ drive_at4, drive_at5, drive_cdev1, drive_cdev2, drive_cec,
+ drive_crt, drive_csus, drive_dap1, drive_dap2, drive_dap3,
+ drive_dap4, drive_dbg, drive_ddc, drive_dev3, drive_gma,
+ drive_gmb, drive_gmc, drive_gmd, drive_gme, drive_gmf,
+ drive_gmg, drive_gmh, drive_gpv, drive_lcd1, drive_lcd2,
+ drive_owr, drive_sdio1, drive_sdio2, drive_sdio3,
+ drive_spi, drive_uaa, drive_uab, drive_uart2, drive_uart3,
+ drive_uda, drive_vi1 ]
+
+ nvidia,function:
+ enum: [ blink, cec, clk_12m_out, clk_32k_in, core_pwr_req,
+ cpu_pwr_req, crt, dap, ddr, dev3, displaya, displayb, dtv,
+ extperiph1, extperiph2, extperiph3, gmi, gmi_alt, hda, hdcp,
+ hdmi, hsi, i2c1, i2c2, i2c3, i2c4, i2cpwr, i2s0, i2s1, i2s2,
+ i2s3, i2s4, invalid, kbc, mio, nand, nand_alt, owr, pcie,
+ pwm0, pwm1, pwm2, pwm3, pwr_int_n, rsvd1, rsvd2, rsvd3,
+ rsvd4, rtck, sata, sdmmc1, sdmmc2, sdmmc3, sdmmc4, spdif,
+ spi1, spi2, spi2_alt, spi3, spi4, spi5, spi6, sysclk, test,
+ trace, uarta, uartb, uartc, uartd, uarte, ulpi, vgp1, vgp2,
+ vgp3, vgp4, vgp5, vgp6, vi, vi_alt1, vi_alt2, vi_alt3 ]
+
+ nvidia,pull: true
+ nvidia,tristate: true
+ nvidia,schmitt: true
+ nvidia,pull-down-strength: true
+ nvidia,pull-up-strength: true
+ nvidia,high-speed-mode: true
+ nvidia,low-power-mode: true
+ nvidia,enable-input: true
+ nvidia,open-drain: true
+ nvidia,lock: true
+ nvidia,io-reset: true
+ nvidia,slew-rate-rising: true
+ nvidia,slew-rate-falling: true
+
+ required:
+ - nvidia,pins
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ pinctrl@70000000 {
+ compatible = "nvidia,tegra30-pinmux";
+ reg = <0x70000868 0x0d0>, /* Pad control registers */
+ <0x70003000 0x3e0>; /* Mux registers */
+
+ pinmux {
+ sdmmc4_clk_pcc4 {
+ nvidia,pins = "sdmmc4_clk_pcc4",
+ "sdmmc4_rst_n_pcc3";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+
+ sdmmc4_dat0_paa0 {
+ nvidia,pins = "sdmmc4_dat0_paa0",
+ "sdmmc4_dat1_paa1",
+ "sdmmc4_dat2_paa2",
+ "sdmmc4_dat3_paa3",
+ "sdmmc4_dat4_paa4",
+ "sdmmc4_dat5_paa5",
+ "sdmmc4_dat6_paa6",
+ "sdmmc4_dat7_paa7";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ };
+ };
+ };
+...