mbox series

[00/12] dt-bindings: first batch of dt-schema conversions for Amlogic Meson bindings

Message ID 20221117-b4-amlogic-bindings-convert-v1-0-3f025599b968@linaro.org
Headers show
Series dt-bindings: first batch of dt-schema conversions for Amlogic Meson bindings | expand

Message

Neil Armstrong Nov. 18, 2022, 2:33 p.m. UTC
Batch conversion of the following bindings:
- meson_sm.txt
- amlogic-efuse.txt
- amlogic-meson-mx-efuse.txt
- meson-wdt.txt
- meson-ir.txt
- rtc-meson.txt
- amlogic,meson6-timer.txt
- meson-gxl-usb2-phy.txt
- amlogic,meson-gx.txt
- amlogic,meson-pcie.txt
- mdio-mux-meson-g12a.txt

The amlogic,meson-gx-pwrc.txt is removed since deprecated and unused 
for a few releases now.

Martin Blumenstingl was also added as bindings maintainer for Meson6/8/8b
related bindings.

Remaining conversions:
- meson,pinctrl.txt
- pwm-meson.txt
- amlogic,meson-gpio-intc.txt
- amlogic,meson-mx-sdio.txt
- rtc-meson-vrtc.txt
- amlogic,axg-sound-card.txt
- amlogic,axg-fifo.txt
- amlogic,axg-pdm.txt
- amlogic,axg-spdifout.txt
- amlogic,axg-tdm-formatters.txt
- amlogic,axg-spdifin.txt
- amlogic,axg-tdm-iface.txt
- amlogic,g12a-tohdmitx.txt
- amlogic,axg-audio-clkc.txt
- amlogic,gxbb-clkc.txt
- amlogic,gxbb-aoclkc.txt
- amlogic,meson8b-clkc.txt

To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Kevin Hilman <khilman@baylibre.com>
To: Jerome Brunet <jbrunet@baylibre.com>
To: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: Wim Van Sebroeck <wim@linux-watchdog.org>
To: Guenter Roeck <linux@roeck-us.net>
To: Mauro Carvalho Chehab <mchehab@kernel.org>
To: Alessandro Zummo <a.zummo@towertech.it>
To: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Daniel Lezcano <daniel.lezcano@linaro.org>
To: Thomas Gleixner <tglx@linutronix.de>
To: Vinod Koul <vkoul@kernel.org>
To: Kishon Vijay Abraham I <kishon@kernel.org>
To: Ulf Hansson <ulf.hansson@linaro.org>
To: Bjorn Helgaas <bhelgaas@google.com>
To: "David S. Miller" <davem@davemloft.net>
To: Eric Dumazet <edumazet@google.com>
To: Jakub Kicinski <kuba@kernel.org>
To: Paolo Abeni <pabeni@redhat.com>
To: Andrew Lunn <andrew@lunn.ch>
To: Heiner Kallweit <hkallweit1@gmail.com>
To: Russell King <linux@armlinux.org.uk>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-watchdog@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-phy@lists.infradead.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Neil Armstrong (12):
      dt-bindings: firmware: convert meson_sm.txt to dt-schema
      dt-bindings: nvmem: convert amlogic-efuse.txt to dt-schema
      dt-bindings: nvmem: convert amlogic-meson-mx-efuse.txt to dt-schema
      dt-bindings: watchdog: convert meson-wdt.txt to dt-schema
      dt-bindings: media: convert meson-ir.txt to dt-schema
      dt-bindings: rtc: convert rtc-meson.txt to dt-schema
      dt-bindings: power: remove deprecated amlogic,meson-gx-pwrc.txt bindings
      dt-bindings: timer: convert timer/amlogic,meson7-timer.txt to dt-schema
      dt-bindings: phy: convert meson-gxl-usb2-phy.txt to dt-schema
      dt-bindings: mmc: convert amlogic,meson-gx.txt to dt-schema
      dt-bindings: pcie: convert amlogic,meson-pcie.txt to dt-schema
      dt-bindings: net: convert mdio-mux-meson-g12a.txt to dt-schema

 .../bindings/firmware/amlogic,meson-gxbb-sm.yaml   |  36 ++++++
 .../bindings/firmware/meson/meson_sm.txt           |  15 ---
 .../bindings/media/amlogic,meson6-ir.yaml          |  43 +++++++
 .../devicetree/bindings/media/meson-ir.txt         |  20 ----
 .../bindings/mmc/amlogic,meson-gx-mmc.yaml         |  78 +++++++++++++
 .../devicetree/bindings/mmc/amlogic,meson-gx.txt   |  39 -------
 .../bindings/net/amlogic,g12a-mdio-mux.yaml        |  80 +++++++++++++
 .../bindings/net/mdio-mux-meson-g12a.txt           |  48 --------
 .../bindings/nvmem/amlogic,meson-gxbb-efuse.yaml   |  52 +++++++++
 .../bindings/nvmem/amlogic,meson6-efuse.yaml       |  64 ++++++++++
 .../devicetree/bindings/nvmem/amlogic-efuse.txt    |  48 --------
 .../bindings/nvmem/amlogic-meson-mx-efuse.txt      |  22 ----
 .../devicetree/bindings/pci/amlogic,axg-pcie.yaml  | 129 +++++++++++++++++++++
 .../devicetree/bindings/pci/amlogic,meson-pcie.txt |  70 -----------
 .../bindings/phy/amlogic,meson-gxl-usb2-phy.yaml   |  56 +++++++++
 .../devicetree/bindings/phy/meson-gxl-usb2-phy.txt |  21 ----
 .../bindings/power/amlogic,meson-gx-pwrc.txt       |  63 ----------
 .../bindings/rtc/amlogic,meson6-rtc.yaml           |  62 ++++++++++
 .../devicetree/bindings/rtc/rtc-meson.txt          |  35 ------
 .../bindings/timer/amlogic,meson6-timer.txt        |  22 ----
 .../bindings/timer/amlogic,meson6-timer.yaml       |  53 +++++++++
 .../bindings/watchdog/amlogic,meson6-wdt.yaml      |  39 +++++++
 .../devicetree/bindings/watchdog/meson-wdt.txt     |  21 ----
 23 files changed, 692 insertions(+), 424 deletions(-)
---
base-commit: 094226ad94f471a9f19e8f8e7140a09c2625abaa
change-id: 20221117-b4-amlogic-bindings-convert-8ef1d75d426d

Best regards,

Comments

Martin Blumenstingl Nov. 25, 2022, 11:04 p.m. UTC | #1
Hi Neil,

thanks for your work on this!

On Fri, Nov 18, 2022 at 3:33 PM Neil Armstrong
<neil.armstrong@linaro.org> wrote:
[...]
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +
> +        sn: sn@14 {
> +            reg = <0x14 0x10>;
> +        };
> +
> +        eth_mac: mac@34 {
> +            reg = <0x34 0x10>;
> +        };
> +
> +        bid: bid@46 {
> +            reg = <0x46 0x30>;
> +        };
I assume you took these examples from the newer, GX eFuse?
Unfortunately on boards with these older SoCs the serial number and
MAC address are often not stored in the eFuse.
This is just an example, so I won't be sad if we keep them. To avoid
confusion I suggest switching to different examples:
  ethernet_mac_address: mac@1b4 {
    reg = <0x1b4 0x6>;
  };
  temperature_calib: calib@1f4 {
     reg = <0x1f4 0x4>;
  };

What do you think?


Best regards,
Martin
Martin Blumenstingl Nov. 25, 2022, 11:10 p.m. UTC | #2
On Fri, Nov 18, 2022 at 3:33 PM Neil Armstrong
<neil.armstrong@linaro.org> wrote:
>
> Convert the Amlogic Meson GXL USB2 PHY bindings to dt-schema.
>
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Martin Blumenstingl Nov. 25, 2022, 11:19 p.m. UTC | #3
Hi Neil,

On Fri, Nov 18, 2022 at 3:33 PM Neil Armstrong
<neil.armstrong@linaro.org> wrote:
[...]
> +  phy-names:
> +    const: pcie
At least SM1 has a PCIe power domain
So we need to allow this property as well

[...]
> +required:
> +  - compatible
clocks and clock-names are missing (you have them in your example though)


Best regards,
Martin
Martin Blumenstingl Nov. 25, 2022, 11:25 p.m. UTC | #4
Hi Neil,

On Fri, Nov 18, 2022 at 3:33 PM Neil Armstrong
<neil.armstrong@linaro.org> wrote:
>
> Convert the Amlogic Meson IR remote control receiver bindings to
> dt-schema.
>
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

Before this is applied we need an additional patch removing the
un-documented "amlogic,meson-gx-ir" compatible string from
arch/arm64/boot/dts/amlogic/meson-gx.dtsi though.
Neil Armstrong Jan. 9, 2023, 11:38 a.m. UTC | #5
On 26/11/2022 00:04, Martin Blumenstingl wrote:
> Hi Neil,
> 
> thanks for your work on this!
> 
> On Fri, Nov 18, 2022 at 3:33 PM Neil Armstrong
> <neil.armstrong@linaro.org> wrote:
> [...]
>> +        #address-cells = <1>;
>> +        #size-cells = <1>;
>> +
>> +        sn: sn@14 {
>> +            reg = <0x14 0x10>;
>> +        };
>> +
>> +        eth_mac: mac@34 {
>> +            reg = <0x34 0x10>;
>> +        };
>> +
>> +        bid: bid@46 {
>> +            reg = <0x46 0x30>;
>> +        };
> I assume you took these examples from the newer, GX eFuse?
> Unfortunately on boards with these older SoCs the serial number and
> MAC address are often not stored in the eFuse.
> This is just an example, so I won't be sad if we keep them. To avoid
> confusion I suggest switching to different examples:
>    ethernet_mac_address: mac@1b4 {
>      reg = <0x1b4 0x6>;
>    };
>    temperature_calib: calib@1f4 {
>       reg = <0x1f4 0x4>;
>    };
> 
> What do you think?


Sure switched to it !

Neil
> 
> 
> Best regards,
> Martin