| Message ID | 20230114210754.353912-1-bhupesh.sharma@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | arm64: dts: qcom: sm6115: Add debug related nodes | expand |
On Sun, 15 Jan 2023 at 02:56, Konrad Dybcio <konrad.dybcio@linaro.org> wrote: > > On 14.01.2023 22:07, Bhupesh Sharma wrote: > > Add dtsi nodes related to coresight debug units such > > as cti, etm, etr, funnel(s), replicator(s), etc. for > > Qualcomm sm6115 SoC. > > > > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > > --- > > arch/arm64/boot/dts/qcom/sm6115.dtsi | 612 +++++++++++++++++++++++++++ > > 1 file changed, 612 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi > > index 478c5d009272..5067910b18ab 100644 > > --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi > > +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi > > @@ -1237,6 +1237,618 @@ dispcc: clock-controller@5f00000 { > > #power-domain-cells = <1>; > > }; > > > > + cti0: cti@8010000 { > > + compatible = "arm,coresight-cti", "arm,primecell"; > > + reg = <0x08010000 0x1000>; > > + > > + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; > > + clock-names = "apb_pclk"; > > + > > + status = "disabled"; > > + }; > > + > > + cti1: cti@8011000 { > > + compatible = "arm,coresight-cti", "arm,primecell"; > > + reg = <0x08011000 0x1000>; > > + > > + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; > > + clock-names = "apb_pclk"; > > + > > + status = "disabled"; > > + }; > > + > > + cti2: cti@8012000 { > > + compatible = "arm,coresight-cti", "arm,primecell"; > > + reg = <0x08012000 0x1000>; > > + > > + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; > > + clock-names = "apb_pclk"; > > + > > + status = "disabled"; > > + }; > > + > > + cti3: cti@8013000 { > > + compatible = "arm,coresight-cti", "arm,primecell"; > > + reg = <0x08013000 0x1000>; > > + > > + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; > > + clock-names = "apb_pclk"; > > + > > + status = "disabled"; > > + }; > > + > > + cti4: cti@8014000 { > > + compatible = "arm,coresight-cti", "arm,primecell"; > > + reg = <0x08014000 0x1000>; > > + > > + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; > > + clock-names = "apb_pclk"; > > + > > + status = "disabled"; > > + }; > > + > > + cti5: cti@8015000 { > > + compatible = "arm,coresight-cti", "arm,primecell"; > > + reg = <0x08015000 0x1000>; > > + > > + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; > > + clock-names = "apb_pclk"; > > + > > + status = "disabled"; > > + }; > > + > > + cti6: cti@8016000 { > > + compatible = "arm,coresight-cti", "arm,primecell"; > > + reg = <0x08016000 0x1000>; > > + > > + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; > > + clock-names = "apb_pclk"; > > + > > + status = "disabled"; > > + }; > > + > > + cti7: cti@8017000 { > > + compatible = "arm,coresight-cti", "arm,primecell"; > > + reg = <0x08017000 0x1000>; > > + > > + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; > > + clock-names = "apb_pclk"; > > + > > + status = "disabled"; > > + }; > > + > > + cti8: cti@8018000 { > > + compatible = "arm,coresight-cti", "arm,primecell"; > > + reg = <0x08018000 0x1000>; > > + > > + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; > > + clock-names = "apb_pclk"; > > + > > + status = "disabled"; > > + }; > > + > > + cti9: cti@8019000 { > > + compatible = "arm,coresight-cti", "arm,primecell"; > > + reg = <0x08019000 0x1000>; > > + > > + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; > > + clock-names = "apb_pclk"; > > + > > + status = "disabled"; > > + }; > > + > > + cti10: cti@801a000 { > > + compatible = "arm,coresight-cti", "arm,primecell"; > > + reg = <0x0801a000 0x1000>; > > + > > + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; > > + clock-names = "apb_pclk"; > > + > > + status = "disabled"; > > + }; > > + > > + cti11: cti@801b000 { > > + compatible = "arm,coresight-cti", "arm,primecell"; > > + reg = <0x0801b000 0x1000>; > > + > > + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; > > + clock-names = "apb_pclk"; > > + > > + status = "disabled"; > > + }; > > + > > + cti12: cti@801c000 { > > + compatible = "arm,coresight-cti", "arm,primecell"; > > + reg = <0x0801c000 0x1000>; > > + > > + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; > > + clock-names = "apb_pclk"; > > + > > + status = "disabled"; > > + }; > > + > > + cti13: cti@801d000 { > > + compatible = "arm,coresight-cti", "arm,primecell"; > > + reg = <0x0801d000 0x1000>; > > + > > + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; > > + clock-names = "apb_pclk"; > > + > > + status = "disabled"; > > + }; > > + > > + cti14: cti@801e000 { > > + compatible = "arm,coresight-cti", "arm,primecell"; > > + reg = <0x0801e000 0x1000>; > > + > > + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; > > + clock-names = "apb_pclk"; > > + > > + status = "disabled"; > > + }; > > + > > + cti15: cti@801f000 { > > + compatible = "arm,coresight-cti", "arm,primecell"; > > + reg = <0x0801f000 0x1000>; > > + > > + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; > > + clock-names = "apb_pclk"; > > + > > + status = "disabled"; > > + }; > > + > > + replicator@8046000 { > > + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; > > + reg = <0x08046000 0x1000>; > > + > > + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; > > + clock-names = "apb_pclk"; > > + > > + status = "disabled"; > > + > > + out-ports { > > + port { > > + replicator_out: endpoint { > > + remote-endpoint = <&etr_in>; > > + }; > > + }; > > + }; > > + > > + in-ports { > > + port { > > + replicator_in: endpoint { > > + remote-endpoint = <&etf_out>; > > + }; > > + }; > > + }; > > + }; > > + > > + etf@8047000 { > > + compatible = "arm,coresight-tmc", "arm,primecell"; > > + reg = <0x08047000 0x1000>; > > + > > + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; > > + clock-names = "apb_pclk"; > > + > > + status = "disabled"; > > + > > + in-ports { > > + port { > > + etf_in: endpoint { > > + remote-endpoint = <&merge_funnel_out>; > > + }; > > + }; > > + }; > > + > > + out-ports { > > + port { > > + etf_out: endpoint { > > + remote-endpoint = <&replicator_in>; > > + }; > > + }; > > + }; > > + }; > > + > > + etr@8048000 { > > + compatible = "arm,coresight-tmc", "arm,primecell"; > > + reg = <0x08048000 0x1000>; > > + > > + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; > > + clock-names = "apb_pclk"; > > + > > + status = "disabled"; > > + > > + in-ports { > > + port { > > + etr_in: endpoint { > > + remote-endpoint = <&replicator_out>; > > + }; > > + }; > > + }; > > + }; > > + > > + stm@8002000 { > This one node is out of order > > I *think* the rest looks good overall... so: > > Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Ok, let me send a fixed v2. Thanks, Bhupesh > > + compatible = "arm,coresight-stm", "arm,primecell"; > > + reg = <0x08002000 0x1000>, > > + <0x0e280000 0x180000>; > > + reg-names = "stm-base", "stm-stimulus-base"; > > + > > + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; > > + clock-names = "apb_pclk"; > > + > > + status = "disabled"; > > + > > + out-ports { > > + port { > > + stm_out: endpoint { > > + remote-endpoint = <&funnel_in0_in>; > > + }; > > + }; > > + }; > > + }; > > + > > + funnel@8041000 { > > + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; > > + reg = <0x08041000 0x1000>; > > + > > + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; > > + clock-names = "apb_pclk"; > > + > > + status = "disabled"; > > + > > + out-ports { > > + port { > > + funnel_in0_out: endpoint { > > + remote-endpoint = <&merge_funnel_in0>; > > + }; > > + }; > > + }; > > + > > + in-ports { > > + port { > > + funnel_in0_in: endpoint { > > + remote-endpoint = <&stm_out>; > > + }; > > + }; > > + }; > > + }; > > + > > + funnel@8042000 { > > + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; > > + reg = <0x08042000 0x1000>; > > + > > + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; > > + clock-names = "apb_pclk"; > > + > > + status = "disabled"; > > + > > + out-ports { > > + port { > > + funnel_in1_out: endpoint { > > + remote-endpoint = <&merge_funnel_in1>; > > + }; > > + }; > > + }; > > + > > + in-ports { > > + port { > > + funnel_in1_in: endpoint { > > + remote-endpoint = <&funnel_apss1_out>; > > + }; > > + }; > > + }; > > + }; > > + > > + funnel@8045000 { > > + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; > > + reg = <0x08045000 0x1000>; > > + > > + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; > > + clock-names = "apb_pclk"; > > + > > + status = "disabled"; > > + > > + out-ports { > > + port { > > + merge_funnel_out: endpoint { > > + remote-endpoint = <&etf_in>; > > + }; > > + }; > > + }; > > + > > + in-ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@0 { > > + reg = <0>; > > + merge_funnel_in0: endpoint { > > + remote-endpoint = <&funnel_in0_out>; > > + }; > > + }; > > + > > + port@1 { > > + reg = <1>; > > + merge_funnel_in1: endpoint { > > + remote-endpoint = <&funnel_in1_out>; > > + }; > > + }; > > + }; > > + }; > > + > > + etm@9040000 { > > + compatible = "arm,coresight-etm4x", "arm,primecell"; > > + reg = <0x09040000 0x1000>; > > + > > + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; > > + clock-names = "apb_pclk"; > > + arm,coresight-loses-context-with-cpu; > > + > > + cpu = <&CPU0>; > > + > > + status = "disabled"; > > + > > + out-ports { > > + port { > > + etm0_out: endpoint { > > + remote-endpoint = <&funnel_apss0_in0>; > > + }; > > + }; > > + }; > > + }; > > + > > + etm@9140000 { > > + compatible = "arm,coresight-etm4x", "arm,primecell"; > > + reg = <0x09140000 0x1000>; > > + > > + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; > > + clock-names = "apb_pclk"; > > + arm,coresight-loses-context-with-cpu; > > + > > + cpu = <&CPU1>; > > + > > + status = "disabled"; > > + > > + out-ports { > > + port { > > + etm1_out: endpoint { > > + remote-endpoint = <&funnel_apss0_in1>; > > + }; > > + }; > > + }; > > + }; > > + > > + etm@9240000 { > > + compatible = "arm,coresight-etm4x", "arm,primecell"; > > + reg = <0x09240000 0x1000>; > > + > > + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; > > + clock-names = "apb_pclk"; > > + arm,coresight-loses-context-with-cpu; > > + > > + cpu = <&CPU2>; > > + > > + status = "disabled"; > > + > > + out-ports { > > + port { > > + etm2_out: endpoint { > > + remote-endpoint = <&funnel_apss0_in2>; > > + }; > > + }; > > + }; > > + }; > > + > > + etm@9340000 { > > + compatible = "arm,coresight-etm4x", "arm,primecell"; > > + reg = <0x09340000 0x1000>; > > + > > + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; > > + clock-names = "apb_pclk"; > > + arm,coresight-loses-context-with-cpu; > > + > > + cpu = <&CPU3>; > > + > > + status = "disabled"; > > + > > + out-ports { > > + port { > > + etm3_out: endpoint { > > + remote-endpoint = <&funnel_apss0_in3>; > > + }; > > + }; > > + }; > > + }; > > + > > + etm@9440000 { > > + compatible = "arm,coresight-etm4x", "arm,primecell"; > > + reg = <0x09440000 0x1000>; > > + > > + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; > > + clock-names = "apb_pclk"; > > + arm,coresight-loses-context-with-cpu; > > + > > + cpu = <&CPU4>; > > + > > + status = "disabled"; > > + > > + out-ports { > > + port { > > + etm4_out: endpoint { > > + remote-endpoint = <&funnel_apss0_in4>; > > + }; > > + }; > > + }; > > + }; > > + > > + etm@9540000 { > > + compatible = "arm,coresight-etm4x", "arm,primecell"; > > + reg = <0x09540000 0x1000>; > > + > > + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; > > + clock-names = "apb_pclk"; > > + arm,coresight-loses-context-with-cpu; > > + > > + cpu = <&CPU5>; > > + > > + status = "disabled"; > > + > > + out-ports { > > + port { > > + etm5_out: endpoint { > > + remote-endpoint = <&funnel_apss0_in5>; > > + }; > > + }; > > + }; > > + }; > > + > > + etm@9640000 { > > + compatible = "arm,coresight-etm4x", "arm,primecell"; > > + reg = <0x09640000 0x1000>; > > + > > + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; > > + clock-names = "apb_pclk"; > > + arm,coresight-loses-context-with-cpu; > > + > > + cpu = <&CPU6>; > > + > > + status = "disabled"; > > + > > + out-ports { > > + port { > > + etm6_out: endpoint { > > + remote-endpoint = <&funnel_apss0_in6>; > > + }; > > + }; > > + }; > > + }; > > + > > + etm@9740000 { > > + compatible = "arm,coresight-etm4x", "arm,primecell"; > > + reg = <0x09740000 0x1000>; > > + > > + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; > > + clock-names = "apb_pclk"; > > + arm,coresight-loses-context-with-cpu; > > + > > + cpu = <&CPU7>; > > + > > + status = "disabled"; > > + > > + out-ports { > > + port { > > + etm7_out: endpoint { > > + remote-endpoint = <&funnel_apss0_in7>; > > + }; > > + }; > > + }; > > + }; > > + > > + funnel@9800000 { > > + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; > > + reg = <0x09800000 0x1000>; > > + > > + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; > > + clock-names = "apb_pclk"; > > + > > + status = "disabled"; > > + > > + out-ports { > > + port { > > + funnel_apss0_out: endpoint { > > + remote-endpoint = <&funnel_apss1_in>; > > + }; > > + }; > > + }; > > + > > + in-ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@0 { > > + reg = <0>; > > + funnel_apss0_in0: endpoint { > > + remote-endpoint = <&etm0_out>; > > + }; > > + }; > > + > > + port@1 { > > + reg = <1>; > > + funnel_apss0_in1: endpoint { > > + remote-endpoint = <&etm1_out>; > > + }; > > + }; > > + > > + port@2 { > > + reg = <2>; > > + funnel_apss0_in2: endpoint { > > + remote-endpoint = <&etm2_out>; > > + }; > > + }; > > + > > + port@3 { > > + reg = <3>; > > + funnel_apss0_in3: endpoint { > > + remote-endpoint = <&etm3_out>; > > + }; > > + }; > > + > > + port@4 { > > + reg = <4>; > > + funnel_apss0_in4: endpoint { > > + remote-endpoint = <&etm4_out>; > > + }; > > + }; > > + > > + port@5 { > > + reg = <5>; > > + funnel_apss0_in5: endpoint { > > + remote-endpoint = <&etm5_out>; > > + }; > > + }; > > + > > + port@6 { > > + reg = <6>; > > + funnel_apss0_in6: endpoint { > > + remote-endpoint = <&etm6_out>; > > + }; > > + }; > > + > > + port@7 { > > + reg = <7>; > > + funnel_apss0_in7: endpoint { > > + remote-endpoint = <&etm7_out>; > > + }; > > + }; > > + }; > > + }; > > + > > + funnel@9810000 { > > + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; > > + reg = <0x09810000 0x1000>; > > + > > + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; > > + clock-names = "apb_pclk"; > > + > > + status = "disabled"; > > + > > + out-ports { > > + port { > > + funnel_apss1_out: endpoint { > > + remote-endpoint = <&funnel_in1_in>; > > + }; > > + }; > > + }; > > + > > + in-ports { > > + port { > > + funnel_apss1_in: endpoint { > > + remote-endpoint = <&funnel_apss0_out>; > > + }; > > + }; > > + }; > > + }; > > + > > apps_smmu: iommu@c600000 { > > compatible = "qcom,sm6115-smmu-500", "qcom,smmu-500", "arm,mmu-500"; > > reg = <0x0c600000 0x80000>;
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index 478c5d009272..5067910b18ab 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -1237,6 +1237,618 @@ dispcc: clock-controller@5f00000 { #power-domain-cells = <1>; }; + cti0: cti@8010000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x08010000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti1: cti@8011000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x08011000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti2: cti@8012000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x08012000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti3: cti@8013000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x08013000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti4: cti@8014000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x08014000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti5: cti@8015000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x08015000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti6: cti@8016000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x08016000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti7: cti@8017000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x08017000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti8: cti@8018000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x08018000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti9: cti@8019000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x08019000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti10: cti@801a000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0801a000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti11: cti@801b000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0801b000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti12: cti@801c000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0801c000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti13: cti@801d000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0801d000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti14: cti@801e000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0801e000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti15: cti@801f000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0801f000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + replicator@8046000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0x08046000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + out-ports { + port { + replicator_out: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + }; + + in-ports { + port { + replicator_in: endpoint { + remote-endpoint = <&etf_out>; + }; + }; + }; + }; + + etf@8047000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x08047000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + in-ports { + port { + etf_in: endpoint { + remote-endpoint = <&merge_funnel_out>; + }; + }; + }; + + out-ports { + port { + etf_out: endpoint { + remote-endpoint = <&replicator_in>; + }; + }; + }; + }; + + etr@8048000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x08048000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = <&replicator_out>; + }; + }; + }; + }; + + stm@8002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0x08002000 0x1000>, + <0x0e280000 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = <&funnel_in0_in>; + }; + }; + }; + }; + + funnel@8041000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x08041000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + out-ports { + port { + funnel_in0_out: endpoint { + remote-endpoint = <&merge_funnel_in0>; + }; + }; + }; + + in-ports { + port { + funnel_in0_in: endpoint { + remote-endpoint = <&stm_out>; + }; + }; + }; + }; + + funnel@8042000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x08042000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + out-ports { + port { + funnel_in1_out: endpoint { + remote-endpoint = <&merge_funnel_in1>; + }; + }; + }; + + in-ports { + port { + funnel_in1_in: endpoint { + remote-endpoint = <&funnel_apss1_out>; + }; + }; + }; + }; + + funnel@8045000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x08045000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + out-ports { + port { + merge_funnel_out: endpoint { + remote-endpoint = <&etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + merge_funnel_in0: endpoint { + remote-endpoint = <&funnel_in0_out>; + }; + }; + + port@1 { + reg = <1>; + merge_funnel_in1: endpoint { + remote-endpoint = <&funnel_in1_out>; + }; + }; + }; + }; + + etm@9040000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x09040000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU0>; + + status = "disabled"; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = <&funnel_apss0_in0>; + }; + }; + }; + }; + + etm@9140000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x09140000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU1>; + + status = "disabled"; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = <&funnel_apss0_in1>; + }; + }; + }; + }; + + etm@9240000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x09240000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU2>; + + status = "disabled"; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = <&funnel_apss0_in2>; + }; + }; + }; + }; + + etm@9340000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x09340000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU3>; + + status = "disabled"; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = <&funnel_apss0_in3>; + }; + }; + }; + }; + + etm@9440000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x09440000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU4>; + + status = "disabled"; + + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = <&funnel_apss0_in4>; + }; + }; + }; + }; + + etm@9540000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x09540000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU5>; + + status = "disabled"; + + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = <&funnel_apss0_in5>; + }; + }; + }; + }; + + etm@9640000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x09640000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU6>; + + status = "disabled"; + + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = <&funnel_apss0_in6>; + }; + }; + }; + }; + + etm@9740000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x09740000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU7>; + + status = "disabled"; + + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = <&funnel_apss0_in7>; + }; + }; + }; + }; + + funnel@9800000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x09800000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + out-ports { + port { + funnel_apss0_out: endpoint { + remote-endpoint = <&funnel_apss1_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + funnel_apss0_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + funnel_apss0_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + + port@2 { + reg = <2>; + funnel_apss0_in2: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + + port@3 { + reg = <3>; + funnel_apss0_in3: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + + port@4 { + reg = <4>; + funnel_apss0_in4: endpoint { + remote-endpoint = <&etm4_out>; + }; + }; + + port@5 { + reg = <5>; + funnel_apss0_in5: endpoint { + remote-endpoint = <&etm5_out>; + }; + }; + + port@6 { + reg = <6>; + funnel_apss0_in6: endpoint { + remote-endpoint = <&etm6_out>; + }; + }; + + port@7 { + reg = <7>; + funnel_apss0_in7: endpoint { + remote-endpoint = <&etm7_out>; + }; + }; + }; + }; + + funnel@9810000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x09810000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + out-ports { + port { + funnel_apss1_out: endpoint { + remote-endpoint = <&funnel_in1_in>; + }; + }; + }; + + in-ports { + port { + funnel_apss1_in: endpoint { + remote-endpoint = <&funnel_apss0_out>; + }; + }; + }; + }; + apps_smmu: iommu@c600000 { compatible = "qcom,sm6115-smmu-500", "qcom,smmu-500", "arm,mmu-500"; reg = <0x0c600000 0x80000>;
Add dtsi nodes related to coresight debug units such as cti, etm, etr, funnel(s), replicator(s), etc. for Qualcomm sm6115 SoC. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> --- arch/arm64/boot/dts/qcom/sm6115.dtsi | 612 +++++++++++++++++++++++++++ 1 file changed, 612 insertions(+)