| Message ID | e24a5534-6e33-cfb9-0634-0caf4646513f@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | [v2,1/2] wifi: rtl8xxxu: Clean up some messy ifs | expand |
> -----Original Message----- > From: Bitterblue Smith <rtl8821cerfe2@gmail.com> > Sent: Monday, April 10, 2023 11:36 PM > To: linux-wireless@vger.kernel.org > Cc: Jes Sorensen <Jes.Sorensen@gmail.com>; Ping-Ke Shih <pkshih@realtek.com> > Subject: [PATCH v2 1/2] wifi: rtl8xxxu: Clean up some messy ifs > > Add some new members to rtl8xxxu_fileops and use them instead of > checking priv->rtl_chip. > > Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> > --- > v2: > - Don't set init_reg_pkt_life_time for the RTL8192EU. Just because > this patch should not introduce any changes in behaviour. > --- > .../net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 5 ++++ > .../realtek/rtl8xxxu/rtl8xxxu_8188e.c | 1 + > .../realtek/rtl8xxxu/rtl8xxxu_8188f.c | 5 ++++ > .../realtek/rtl8xxxu/rtl8xxxu_8710b.c | 9 +++++++ > .../realtek/rtl8xxxu/rtl8xxxu_8723b.c | 3 +++ > .../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 26 +++++-------------- > 6 files changed, 30 insertions(+), 19 deletions(-) > > diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h > b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h > index 9d48c69ffece..39fee07917e7 100644 > --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h > +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h > @@ -1923,6 +1923,11 @@ struct rtl8xxxu_fileops { > u8 has_tx_report:1; > u8 gen2_thermal_meter:1; > u8 needs_full_init:1; > + u8 init_reg_rxfltmap:1; > + u8 init_reg_pkt_life_time:1; > + u8 init_reg_hmtfr:1; > + u8 ampdu_max_time; > + u8 ustime_tsf_edca; > u32 adda_1t_init; > u32 adda_1t_path_on; > u32 adda_2t_path_on_a; > diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c > b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c > index 6a82ec47568e..af8436070ba7 100644 > --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c > +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c > @@ -1883,6 +1883,7 @@ struct rtl8xxxu_fileops rtl8188eu_fops = { > .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc16), > .tx_desc_size = sizeof(struct rtl8xxxu_txdesc32), > .has_tx_report = 1, > + .init_reg_pkt_life_time = 1, > .gen2_thermal_meter = 1, > .adda_1t_init = 0x0b1b25a0, > .adda_1t_path_on = 0x0bdb25a0, > diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c > b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c > index 82dee1fed477..dfb250adb168 100644 > --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c > +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c > @@ -1746,6 +1746,11 @@ struct rtl8xxxu_fileops rtl8188fu_fops = { > .has_tx_report = 1, > .gen2_thermal_meter = 1, > .needs_full_init = 1, > + .init_reg_rxfltmap = 1, > + .init_reg_pkt_life_time = 1, > + .init_reg_hmtfr = 1, > + .ampdu_max_time = 0x70, > + .ustime_tsf_edca = 0x28, > .adda_1t_init = 0x03c00014, > .adda_1t_path_on = 0x03c00014, > .trxff_boundary = 0x3f7f, > diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8710b.c > b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8710b.c > index 920466e39604..22d4704dd31e 100644 > --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8710b.c > +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8710b.c > @@ -1865,6 +1865,15 @@ struct rtl8xxxu_fileops rtl8710bu_fops = { > .has_tx_report = 1, > .gen2_thermal_meter = 1, > .needs_full_init = 1, > + .init_reg_rxfltmap = 1, > + .init_reg_pkt_life_time = 1, > + .init_reg_hmtfr = 1, > + .ampdu_max_time = 0x5e, > + /* > + * The RTL8710BU vendor driver uses 0x50 here and it works fine, > + * but in rtl8xxxu 0x50 causes slow upload and random packet loss. Why? > + */ > + .ustime_tsf_edca = 0x28, > .adda_1t_init = 0x03c00016, > .adda_1t_path_on = 0x03c00016, > .trxff_boundary = 0x3f7f, > diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c > b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c > index d99538eb8398..c31c2b52ac77 100644 > --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c > +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c > @@ -1741,6 +1741,9 @@ struct rtl8xxxu_fileops rtl8723bu_fops = { > .has_tx_report = 1, > .gen2_thermal_meter = 1, > .needs_full_init = 1, > + .init_reg_hmtfr = 1, > + .ampdu_max_time = 0x5e, > + .ustime_tsf_edca = 0x50, > .adda_1t_init = 0x01c00014, > .adda_1t_path_on = 0x01c00014, > .adda_2t_path_on_a = 0x01c00014, > diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c > b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c > index c152b228606f..62dd53a57659 100644 > --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c > +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c > @@ -1916,7 +1916,7 @@ static int rtl8xxxu_start_firmware(struct rtl8xxxu_priv *priv) > /* > * Init H2C command > */ > - if (priv->rtl_chip == RTL8723B || priv->rtl_chip == RTL8188F || priv->rtl_chip == RTL8710B) > + if (priv->fops->init_reg_hmtfr) > rtl8xxxu_write8(priv, REG_HMTFR, 0x0f); > exit: > return ret; > @@ -3864,11 +3864,8 @@ void rtl8xxxu_init_burst(struct rtl8xxxu_priv *priv) > rtl8xxxu_write8(priv, REG_HT_SINGLE_AMPDU_8723B, val8); > > rtl8xxxu_write16(priv, REG_MAX_AGGR_NUM, 0x0c14); > - if (priv->rtl_chip == RTL8723B || priv->rtl_chip == RTL8710B) > - val8 = 0x5e; > - else if (priv->rtl_chip == RTL8188F) > - val8 = 0x70; /* 0x5e would make it very slow */ > - rtl8xxxu_write8(priv, REG_AMPDU_MAX_TIME_8723B, val8); > + rtl8xxxu_write8(priv, REG_AMPDU_MAX_TIME_8723B, > + priv->fops->ampdu_max_time); > rtl8xxxu_write32(priv, REG_AGGLEN_LMT, 0xffffffff); > rtl8xxxu_write8(priv, REG_RX_PKT_LIMIT, 0x18); > rtl8xxxu_write8(priv, REG_PIFS, 0x00); > @@ -3876,16 +3873,8 @@ void rtl8xxxu_init_burst(struct rtl8xxxu_priv *priv) > rtl8xxxu_write8(priv, REG_FWHW_TXQ_CTRL, FWHW_TXQ_CTRL_AMPDU_RETRY); > rtl8xxxu_write32(priv, REG_FAST_EDCA_CTRL, 0x03086666); > } > - /* > - * The RTL8710BU vendor driver uses 0x50 here and it works fine, > - * but in rtl8xxxu 0x50 causes slow upload and random packet loss. Why? > - */ > - if (priv->rtl_chip == RTL8723B) > - val8 = 0x50; > - else if (priv->rtl_chip == RTL8188F || priv->rtl_chip == RTL8710B) > - val8 = 0x28; /* 0x50 would make the upload slow */ > - rtl8xxxu_write8(priv, REG_USTIME_TSF_8723B, val8); > - rtl8xxxu_write8(priv, REG_USTIME_EDCA, val8); > + rtl8xxxu_write8(priv, REG_USTIME_TSF_8723B, priv->fops->ustime_tsf_edca); > + rtl8xxxu_write8(priv, REG_USTIME_EDCA, priv->fops->ustime_tsf_edca); > > /* to prevent mac is reseted by bus. */ > val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL); > @@ -4102,7 +4091,7 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) > RCR_APPEND_PHYSTAT | RCR_APPEND_ICV | RCR_APPEND_MIC; > rtl8xxxu_write32(priv, REG_RCR, val32); > > - if (priv->rtl_chip == RTL8188F || priv->rtl_chip == RTL8710B) { > + if (fops->init_reg_rxfltmap) { > /* Accept all data frames */ > rtl8xxxu_write16(priv, REG_RXFLTMAP2, 0xffff); > > @@ -4187,8 +4176,7 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) > if (fops->init_aggregation) > fops->init_aggregation(priv); > > - if (priv->rtl_chip == RTL8188F || priv->rtl_chip == RTL8188E || > - priv->rtl_chip == RTL8710B) { > + if (fops->init_reg_pkt_life_time) { > rtl8xxxu_write16(priv, REG_PKT_VO_VI_LIFE_TIME, 0x0400); /* unit: 256us. 256ms */ > rtl8xxxu_write16(priv, REG_PKT_BE_BK_LIFE_TIME, 0x0400); /* unit: 256us. 256ms */ > } > -- > 2.39.2 > > ------Please consider the environment before printing this e-mail.
> -----Original Message----- > From: Bitterblue Smith <rtl8821cerfe2@gmail.com> > Sent: Monday, April 10, 2023 11:37 PM > To: linux-wireless@vger.kernel.org > Cc: Jes Sorensen <Jes.Sorensen@gmail.com>; Ping-Ke Shih <pkshih@realtek.com> > Subject: [PATCH v2 2/2] wifi: rtl8xxxu: Support devices with 5-6 out endpoints > > Handle them the same way as the devices with 3-4 USB out endpoints. > This is needed for the RTL8192FU. > > Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> > --- > v2: > - No change. > --- > drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 2 +- > drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 2 ++ > 2 files changed, 3 insertions(+), 1 deletion(-) > > diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h > b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h > index 39fee07917e7..82a0290ccb29 100644 > --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h > +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h > @@ -27,7 +27,7 @@ > #define RTL8XXXU_MAX_REG_POLL 500 > #define USB_INTR_CONTENT_LENGTH 56 > > -#define RTL8XXXU_OUT_ENDPOINTS 4 > +#define RTL8XXXU_OUT_ENDPOINTS 6 > > #define REALTEK_USB_READ 0xc0 > #define REALTEK_USB_WRITE 0x40 > diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c > b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c > index 62dd53a57659..6106b47d0c37 100644 > --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c > +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c > @@ -1663,6 +1663,8 @@ int rtl8xxxu_config_endpoints_no_sie(struct rtl8xxxu_priv *priv) > struct device *dev = &priv->udev->dev; > > switch (priv->nr_out_eps) { > + case 6: > + case 5: > case 4: > case 3: > priv->ep_tx_low_queue = 1; > -- > 2.39.2 > > ------Please consider the environment before printing this e-mail.
Bitterblue Smith <rtl8821cerfe2@gmail.com> wrote: > Add some new members to rtl8xxxu_fileops and use them instead of > checking priv->rtl_chip. > > Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> > Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> 2 patches applied to wireless-next.git, thanks. a5be45ea4593 wifi: rtl8xxxu: Clean up some messy ifs b9c3379dda14 wifi: rtl8xxxu: Support devices with 5-6 out endpoints
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h index 9d48c69ffece..39fee07917e7 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h @@ -1923,6 +1923,11 @@ struct rtl8xxxu_fileops { u8 has_tx_report:1; u8 gen2_thermal_meter:1; u8 needs_full_init:1; + u8 init_reg_rxfltmap:1; + u8 init_reg_pkt_life_time:1; + u8 init_reg_hmtfr:1; + u8 ampdu_max_time; + u8 ustime_tsf_edca; u32 adda_1t_init; u32 adda_1t_path_on; u32 adda_2t_path_on_a; diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c index 6a82ec47568e..af8436070ba7 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c @@ -1883,6 +1883,7 @@ struct rtl8xxxu_fileops rtl8188eu_fops = { .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc16), .tx_desc_size = sizeof(struct rtl8xxxu_txdesc32), .has_tx_report = 1, + .init_reg_pkt_life_time = 1, .gen2_thermal_meter = 1, .adda_1t_init = 0x0b1b25a0, .adda_1t_path_on = 0x0bdb25a0, diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c index 82dee1fed477..dfb250adb168 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c @@ -1746,6 +1746,11 @@ struct rtl8xxxu_fileops rtl8188fu_fops = { .has_tx_report = 1, .gen2_thermal_meter = 1, .needs_full_init = 1, + .init_reg_rxfltmap = 1, + .init_reg_pkt_life_time = 1, + .init_reg_hmtfr = 1, + .ampdu_max_time = 0x70, + .ustime_tsf_edca = 0x28, .adda_1t_init = 0x03c00014, .adda_1t_path_on = 0x03c00014, .trxff_boundary = 0x3f7f, diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8710b.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8710b.c index 920466e39604..22d4704dd31e 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8710b.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8710b.c @@ -1865,6 +1865,15 @@ struct rtl8xxxu_fileops rtl8710bu_fops = { .has_tx_report = 1, .gen2_thermal_meter = 1, .needs_full_init = 1, + .init_reg_rxfltmap = 1, + .init_reg_pkt_life_time = 1, + .init_reg_hmtfr = 1, + .ampdu_max_time = 0x5e, + /* + * The RTL8710BU vendor driver uses 0x50 here and it works fine, + * but in rtl8xxxu 0x50 causes slow upload and random packet loss. Why? + */ + .ustime_tsf_edca = 0x28, .adda_1t_init = 0x03c00016, .adda_1t_path_on = 0x03c00016, .trxff_boundary = 0x3f7f, diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c index d99538eb8398..c31c2b52ac77 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c @@ -1741,6 +1741,9 @@ struct rtl8xxxu_fileops rtl8723bu_fops = { .has_tx_report = 1, .gen2_thermal_meter = 1, .needs_full_init = 1, + .init_reg_hmtfr = 1, + .ampdu_max_time = 0x5e, + .ustime_tsf_edca = 0x50, .adda_1t_init = 0x01c00014, .adda_1t_path_on = 0x01c00014, .adda_2t_path_on_a = 0x01c00014, diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c index c152b228606f..62dd53a57659 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c @@ -1916,7 +1916,7 @@ static int rtl8xxxu_start_firmware(struct rtl8xxxu_priv *priv) /* * Init H2C command */ - if (priv->rtl_chip == RTL8723B || priv->rtl_chip == RTL8188F || priv->rtl_chip == RTL8710B) + if (priv->fops->init_reg_hmtfr) rtl8xxxu_write8(priv, REG_HMTFR, 0x0f); exit: return ret; @@ -3864,11 +3864,8 @@ void rtl8xxxu_init_burst(struct rtl8xxxu_priv *priv) rtl8xxxu_write8(priv, REG_HT_SINGLE_AMPDU_8723B, val8); rtl8xxxu_write16(priv, REG_MAX_AGGR_NUM, 0x0c14); - if (priv->rtl_chip == RTL8723B || priv->rtl_chip == RTL8710B) - val8 = 0x5e; - else if (priv->rtl_chip == RTL8188F) - val8 = 0x70; /* 0x5e would make it very slow */ - rtl8xxxu_write8(priv, REG_AMPDU_MAX_TIME_8723B, val8); + rtl8xxxu_write8(priv, REG_AMPDU_MAX_TIME_8723B, + priv->fops->ampdu_max_time); rtl8xxxu_write32(priv, REG_AGGLEN_LMT, 0xffffffff); rtl8xxxu_write8(priv, REG_RX_PKT_LIMIT, 0x18); rtl8xxxu_write8(priv, REG_PIFS, 0x00); @@ -3876,16 +3873,8 @@ void rtl8xxxu_init_burst(struct rtl8xxxu_priv *priv) rtl8xxxu_write8(priv, REG_FWHW_TXQ_CTRL, FWHW_TXQ_CTRL_AMPDU_RETRY); rtl8xxxu_write32(priv, REG_FAST_EDCA_CTRL, 0x03086666); } - /* - * The RTL8710BU vendor driver uses 0x50 here and it works fine, - * but in rtl8xxxu 0x50 causes slow upload and random packet loss. Why? - */ - if (priv->rtl_chip == RTL8723B) - val8 = 0x50; - else if (priv->rtl_chip == RTL8188F || priv->rtl_chip == RTL8710B) - val8 = 0x28; /* 0x50 would make the upload slow */ - rtl8xxxu_write8(priv, REG_USTIME_TSF_8723B, val8); - rtl8xxxu_write8(priv, REG_USTIME_EDCA, val8); + rtl8xxxu_write8(priv, REG_USTIME_TSF_8723B, priv->fops->ustime_tsf_edca); + rtl8xxxu_write8(priv, REG_USTIME_EDCA, priv->fops->ustime_tsf_edca); /* to prevent mac is reseted by bus. */ val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL); @@ -4102,7 +4091,7 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) RCR_APPEND_PHYSTAT | RCR_APPEND_ICV | RCR_APPEND_MIC; rtl8xxxu_write32(priv, REG_RCR, val32); - if (priv->rtl_chip == RTL8188F || priv->rtl_chip == RTL8710B) { + if (fops->init_reg_rxfltmap) { /* Accept all data frames */ rtl8xxxu_write16(priv, REG_RXFLTMAP2, 0xffff); @@ -4187,8 +4176,7 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) if (fops->init_aggregation) fops->init_aggregation(priv); - if (priv->rtl_chip == RTL8188F || priv->rtl_chip == RTL8188E || - priv->rtl_chip == RTL8710B) { + if (fops->init_reg_pkt_life_time) { rtl8xxxu_write16(priv, REG_PKT_VO_VI_LIFE_TIME, 0x0400); /* unit: 256us. 256ms */ rtl8xxxu_write16(priv, REG_PKT_BE_BK_LIFE_TIME, 0x0400); /* unit: 256us. 256ms */ }
Add some new members to rtl8xxxu_fileops and use them instead of checking priv->rtl_chip. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> --- v2: - Don't set init_reg_pkt_life_time for the RTL8192EU. Just because this patch should not introduce any changes in behaviour. --- .../net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 5 ++++ .../realtek/rtl8xxxu/rtl8xxxu_8188e.c | 1 + .../realtek/rtl8xxxu/rtl8xxxu_8188f.c | 5 ++++ .../realtek/rtl8xxxu/rtl8xxxu_8710b.c | 9 +++++++ .../realtek/rtl8xxxu/rtl8xxxu_8723b.c | 3 +++ .../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 26 +++++-------------- 6 files changed, 30 insertions(+), 19 deletions(-)