| Message ID | 20230414-pmi632-v2-0-98bafa909c36@z3ntu.xyz |
|---|---|
| Headers | show |
| Series | Add PMI632 PMIC and RGB LED on sdm632-fairphone-fp3 | expand |
On Tue, Apr 18, 2023 at 6:43 PM Luca Weiss <luca@z3ntu.xyz> wrote: > Add support for the PMI632 PMIC in the spmi-gpio & qcom-lpg driver, add > the dtsi for the PMIC and enable the notification LED on fairphone-fp3. > > Signed-off-by: Luca Weiss <luca@z3ntu.xyz> (...) > Luca Weiss (8): > dt-bindings: pinctrl: qcom,pmic-gpio: add PMI632 > pinctrl: qcom: spmi-gpio: Add PMI632 support Patches 1 & 2 are finished so I applied them to the pinctrl tree so Luca does not need to keep reiterating these for the next kernel cycle. Yours, Linus Walleij
On Tue, 18 Apr 2023, Luca Weiss wrote: > Add support for the PMI632 PMIC in the spmi-gpio & qcom-lpg driver, add > the dtsi for the PMIC and enable the notification LED on fairphone-fp3. > > Signed-off-by: Luca Weiss <luca@z3ntu.xyz> > --- > Changes in v2: > - Add qcom,pmi632-gpio to all the needed places in yaml > - Add patch documenting led path > - Pick up tags > - Drop vadc pre-scaling patch since it was applied > - Link to v1: https://lore.kernel.org/r/20230414-pmi632-v1-0-fe94dc414832@z3ntu.xyz > > --- > Luca Weiss (8): > dt-bindings: pinctrl: qcom,pmic-gpio: add PMI632 > pinctrl: qcom: spmi-gpio: Add PMI632 support > dt-bindings: leds: qcom-lpg: Add compatible for PMI632 LPG block > leds: qcom-lpg: Add support for PMI632 LPG > dt-bindings: mfd: qcom-spmi-pmic: Add PMI632 compatible > arm64: dts: qcom: Add PMI632 PMIC > arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED > Documentation: leds: Add "rgb:status" path > > .../devicetree/bindings/leds/leds-qcom-lpg.yaml | 1 + > .../devicetree/bindings/mfd/qcom,spmi-pmic.yaml | 1 + > .../bindings/pinctrl/qcom,pmic-gpio.yaml | 3 + > Documentation/leds/well-known-leds.txt | 1 + > arch/arm64/boot/dts/qcom/pmi632.dtsi | 165 +++++++++++++++++++++ > arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts | 29 ++++ > drivers/leds/rgb/leds-qcom-lpg.c | 15 ++ > drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 1 + > 8 files changed, 216 insertions(+) Please rebase anything that is yet to be applied and submit a [RESEND]. Thank you. > --- > base-commit: 3f49aa65798675341eb9d4f947c40558564b2e6d > change-id: 20230414-pmi632-4ae03225ae75 > > Best regards, > -- > Luca Weiss <luca@z3ntu.xyz>
Add support for the PMI632 PMIC in the spmi-gpio & qcom-lpg driver, add the dtsi for the PMIC and enable the notification LED on fairphone-fp3. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> --- Changes in v2: - Add qcom,pmi632-gpio to all the needed places in yaml - Add patch documenting led path - Pick up tags - Drop vadc pre-scaling patch since it was applied - Link to v1: https://lore.kernel.org/r/20230414-pmi632-v1-0-fe94dc414832@z3ntu.xyz --- Luca Weiss (8): dt-bindings: pinctrl: qcom,pmic-gpio: add PMI632 pinctrl: qcom: spmi-gpio: Add PMI632 support dt-bindings: leds: qcom-lpg: Add compatible for PMI632 LPG block leds: qcom-lpg: Add support for PMI632 LPG dt-bindings: mfd: qcom-spmi-pmic: Add PMI632 compatible arm64: dts: qcom: Add PMI632 PMIC arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED Documentation: leds: Add "rgb:status" path .../devicetree/bindings/leds/leds-qcom-lpg.yaml | 1 + .../devicetree/bindings/mfd/qcom,spmi-pmic.yaml | 1 + .../bindings/pinctrl/qcom,pmic-gpio.yaml | 3 + Documentation/leds/well-known-leds.txt | 1 + arch/arm64/boot/dts/qcom/pmi632.dtsi | 165 +++++++++++++++++++++ arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts | 29 ++++ drivers/leds/rgb/leds-qcom-lpg.c | 15 ++ drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 1 + 8 files changed, 216 insertions(+) --- base-commit: 3f49aa65798675341eb9d4f947c40558564b2e6d change-id: 20230414-pmi632-4ae03225ae75 Best regards,