| Message ID | 20230420024118.22677-5-walker.chen@starfivetech.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add TDM audio on StarFive JH7110 | expand |
Hey Walker, On Thu, Apr 20, 2023 at 10:41:18AM +0800, Walker Chen wrote: > Add the tdm controller node and sound card for the StarFive JH7110 SoC. Is this one of these waveshare things + a visionfive 2? https://www.waveshare.com/wm8960-audio-hat.htm I'm a bit lost as to why this needs a whole new board, should it not just be an overlay that you can apply to the existing dts? Taking this to an extreme, should I expect to see a new devicetree for everything RPi hat that you decide to use with a VisionFive 2? Also, it'd be nice to provide a Link: to where someone can find more info on this combination of items. Google for "wm8960 visionfive 2" gives me nothing, nor does "starfive audio card" etc. Thanks, Conor. > Reviewed-by: Hal Feng <hal.feng@starfivetech.com> > Signed-off-by: Walker Chen <walker.chen@starfivetech.com> > --- > arch/riscv/boot/dts/starfive/Makefile | 1 + > .../starfive/jh7110-starfive-audio-card.dts | 67 +++++++++++++++++++ > .../jh7110-starfive-visionfive-2.dtsi | 40 +++++++++++ > arch/riscv/boot/dts/starfive/jh7110.dtsi | 21 ++++++ > 4 files changed, 129 insertions(+) > create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-audio-card.dts > > diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile > index 170956846d49..cb22cb7f66b0 100644 > --- a/arch/riscv/boot/dts/starfive/Makefile > +++ b/arch/riscv/boot/dts/starfive/Makefile > @@ -4,3 +4,4 @@ dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-starfive-visionfive-v1.dtb > > dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb > dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb > +dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-audio-card.dtb > diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-audio-card.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-audio-card.dts > new file mode 100644 > index 000000000000..967d9aa7d1e1 > --- /dev/null > +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-audio-card.dts > @@ -0,0 +1,67 @@ > +// SPDX-License-Identifier: GPL-2.0 OR MIT > +/* > + * Device Tree for JH7110 + Simple Audio Card > + * > + * Copyright (C) 2023 StarFive Technology Co., Ltd. > + */ > + > +/dts-v1/; > +#include "jh7110-starfive-visionfive-2-v1.3b.dts" > + > +/ { > + model = "StarFive VisionFive 2 Audio Board"; > + compatible = "starfive,visionfive-2-audio", "starfive,jh7110"; > + > + wm8960_mclk: wm8960-mclk { > + compatible = "fixed-clock"; > + clock-output-names = "wm8960_mclk"; > + #clock-cells = <0>; > + clock-frequency = <24576000>; > + }; > + > + sound { > + compatible = "simple-audio-card"; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + simple-audio-card,name = "Starfive-TDM-Sound-Card"; > + simple-audio-card,widgets = "Microphone", "Mic Jack", > + "Line", "Line In", > + "Line", "Line Out", > + "Speaker", "Speaker", > + "Headphone", "Headphone Jack"; > + simple-audio-card,routing = "Headphone Jack", "HP_L", > + "Headphone Jack", "HP_R", > + "Speaker", "SPK_LP", > + "Speaker", "SPK_LN", > + "LINPUT1", "Mic Jack", > + "LINPUT3", "Mic Jack", > + "RINPUT1", "Mic Jack", > + "RINPUT2", "Mic Jack"; > + > + simple-audio-card,dai-link@0 { > + reg = <0>; > + format = "dsp_a"; > + bitclock-master = <&dailink_master>; > + frame-master = <&dailink_master>; > + > + cpu { > + sound-dai = <&tdm>; > + }; > + dailink_master: codec { > + sound-dai = <&wm8960>; > + clocks = <&wm8960_mclk>; > + }; > + }; > + }; > +}; > + > +&i2c0 { > + wm8960: codec@1a { > + compatible = "wlf,wm8960"; > + reg = <0x1a>; > + wlf,shared-lrclk; > + #sound-dai-cells = <0>; > + }; > +}; > diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi > index 1155b97b593d..19b5954ee72d 100644 > --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi > +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi > @@ -214,6 +214,40 @@ > slew-rate = <0>; > }; > }; > + > + tdm0_pins: tdm0-pins { > + tdm0-pins-tx { > + pinmux = <GPIOMUX(44, GPOUT_SYS_TDM_TXD, > + GPOEN_ENABLE, > + GPI_NONE)>; > + bias-pull-up; > + drive-strength = <2>; > + input-disable; > + input-schmitt-disable; > + slew-rate = <0>; > + }; > + > + tdm0-pins-rx { > + pinmux = <GPIOMUX(61, GPOUT_HIGH, > + GPOEN_DISABLE, > + GPI_SYS_TDM_RXD)>; > + input-enable; > + }; > + > + tdm0-pins-sync { > + pinmux = <GPIOMUX(63, GPOUT_HIGH, > + GPOEN_DISABLE, > + GPI_SYS_TDM_SYNC)>; > + input-enable; > + }; > + > + tdm0-pins-pcmclk { > + pinmux = <GPIOMUX(38, GPOUT_HIGH, > + GPOEN_DISABLE, > + GPI_SYS_TDM_CLK)>; > + input-enable; > + }; > + }; > }; > > &uart0 { > @@ -221,3 +255,9 @@ > pinctrl-0 = <&uart0_pins>; > status = "okay"; > }; > + > +&tdm { > + pinctrl-names = "default"; > + pinctrl-0 = <&tdm0_pins>; > + status = "okay"; > +}; > diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi > index 866313570a7e..cfda6fb0d91b 100644 > --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi > +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi > @@ -366,6 +366,27 @@ > status = "disabled"; > }; > > + tdm: tdm@10090000 { > + compatible = "starfive,jh7110-tdm"; > + reg = <0x0 0x10090000 0x0 0x1000>; > + clocks = <&syscrg JH7110_SYSCLK_TDM_AHB>, > + <&syscrg JH7110_SYSCLK_TDM_APB>, > + <&syscrg JH7110_SYSCLK_TDM_INTERNAL>, > + <&syscrg JH7110_SYSCLK_TDM_TDM>, > + <&syscrg JH7110_SYSCLK_MCLK_INNER>, > + <&tdm_ext>; > + clock-names = "tdm_ahb", "tdm_apb", > + "tdm_internal", "tdm", > + "mclk_inner", "tdm_ext"; > + resets = <&syscrg JH7110_SYSRST_TDM_AHB>, > + <&syscrg JH7110_SYSRST_TDM_APB>, > + <&syscrg JH7110_SYSRST_TDM_CORE>; > + dmas = <&dma 20>, <&dma 21>; > + dma-names = "rx","tx"; > + #sound-dai-cells = <0>; > + status = "disabled"; > + }; > + > stgcrg: clock-controller@10230000 { > compatible = "starfive,jh7110-stgcrg"; > reg = <0x0 0x10230000 0x0 0x10000>; > -- > 2.17.1 >
On 2023/4/22 0:50, Conor Dooley wrote: > Hey Walker, > > On Thu, Apr 20, 2023 at 10:41:18AM +0800, Walker Chen wrote: >> Add the tdm controller node and sound card for the StarFive JH7110 SoC. > > Is this one of these waveshare things + a visionfive 2? > https://www.waveshare.com/wm8960-audio-hat.htm Hey Conor, I'm glad to receive your comments. Now we are using this board + VisionFive2 : https://wiki.seeedstudio.com/ReSpeaker_2_Mics_Pi_HAT/ > > I'm a bit lost as to why this needs a whole new board, should it not > just be an overlay that you can apply to the existing dts? > > Taking this to an extreme, should I expect to see a new devicetree for > everything RPi hat that you decide to use with a VisionFive 2? For your response, I did some thinking. Because wm8960 codec is not integrated on the VisionFive2 board, perhaps using overlay is a better way. > > Also, it'd be nice to provide a Link: to where someone can find more > info on this combination of items. Google for "wm8960 visionfive 2" > gives me nothing, nor does "starfive audio card" etc. > > Thanks, > Conor. > >> Reviewed-by: Hal Feng <hal.feng@starfivetech.com> >> Signed-off-by: Walker Chen <walker.chen@starfivetech.com> >> --- Best regards, Walker
On Mon, Apr 24, 2023 at 11:21:11AM +0800, Walker Chen wrote: > > > On 2023/4/22 0:50, Conor Dooley wrote: > > Hey Walker, > > > > On Thu, Apr 20, 2023 at 10:41:18AM +0800, Walker Chen wrote: > >> Add the tdm controller node and sound card for the StarFive JH7110 SoC. > > > > Is this one of these waveshare things + a visionfive 2? > > https://www.waveshare.com/wm8960-audio-hat.htm > > Hey Conor, > I'm glad to receive your comments. > > Now we are using this board + VisionFive2 : > https://wiki.seeedstudio.com/ReSpeaker_2_Mics_Pi_HAT/ > > > > > I'm a bit lost as to why this needs a whole new board, should it not > > just be an overlay that you can apply to the existing dts? > > > > Taking this to an extreme, should I expect to see a new devicetree for > > everything RPi hat that you decide to use with a VisionFive 2? > > For your response, I did some thinking. Because wm8960 codec is not integrated > on the VisionFive2 board, perhaps using overlay is a better way. Aye. I think so too. From my PoV, if this particular seeed audio board is something you're bundling with VisionFive 2 boards on your storefront etc, then I'm fine with taking it as an in-tree overlay. If it is just a "random" RPi hat (that happens to be exactly what you need for testing the audio drivers), then I don't know where to draw a line for what is & what is not acceptable for inclusion. In both cases, it's Emil's call. Cheers, Conor. > > Also, it'd be nice to provide a Link: to where someone can find more > > info on this combination of items. Google for "wm8960 visionfive 2" > > gives me nothing, nor does "starfive audio card" etc.
On Mon, 24 Apr 2023 at 18:27, Conor Dooley <conor@kernel.org> wrote: > On Mon, Apr 24, 2023 at 11:21:11AM +0800, Walker Chen wrote: > > > > > > On 2023/4/22 0:50, Conor Dooley wrote: > > > Hey Walker, > > > > > > On Thu, Apr 20, 2023 at 10:41:18AM +0800, Walker Chen wrote: > > >> Add the tdm controller node and sound card for the StarFive JH7110 SoC. > > > > > > Is this one of these waveshare things + a visionfive 2? > > > https://www.waveshare.com/wm8960-audio-hat.htm > > > > Hey Conor, > > I'm glad to receive your comments. > > > > Now we are using this board + VisionFive2 : > > https://wiki.seeedstudio.com/ReSpeaker_2_Mics_Pi_HAT/ > > > > > > > > I'm a bit lost as to why this needs a whole new board, should it not > > > just be an overlay that you can apply to the existing dts? > > > > > > Taking this to an extreme, should I expect to see a new devicetree for > > > everything RPi hat that you decide to use with a VisionFive 2? > > > > For your response, I did some thinking. Because wm8960 codec is not integrated > > on the VisionFive2 board, perhaps using overlay is a better way. > > Aye. I think so too. From my PoV, if this particular seeed audio board > is something you're bundling with VisionFive 2 boards on your storefront > etc, then I'm fine with taking it as an in-tree overlay. > If it is just a "random" RPi hat (that happens to be exactly what you > need for testing the audio drivers), then I don't know where to draw a > line for what is & what is not acceptable for inclusion. > > In both cases, it's Emil's call. I'm not aware of any shop bundling the VF2 with an audio board. I agree: please don't add device trees for combinations of VF2s and hats. That should be an overlay. /Emil > > > Also, it'd be nice to provide a Link: to where someone can find more > > > info on this combination of items. Google for "wm8960 visionfive 2" > > > gives me nothing, nor does "starfive audio card" etc. >
On 2023/4/26 4:57, Emil Renner Berthing wrote: > On Mon, 24 Apr 2023 at 18:27, Conor Dooley <conor@kernel.org> wrote: >> On Mon, Apr 24, 2023 at 11:21:11AM +0800, Walker Chen wrote: >> > >> > >> > On 2023/4/22 0:50, Conor Dooley wrote: >> > > Hey Walker, >> > > >> > > On Thu, Apr 20, 2023 at 10:41:18AM +0800, Walker Chen wrote: >> > >> Add the tdm controller node and sound card for the StarFive JH7110 SoC. >> > > >> > > Is this one of these waveshare things + a visionfive 2? >> > > https://www.waveshare.com/wm8960-audio-hat.htm >> > >> > Hey Conor, >> > I'm glad to receive your comments. >> > >> > Now we are using this board + VisionFive2 : >> > https://wiki.seeedstudio.com/ReSpeaker_2_Mics_Pi_HAT/ >> > >> > > >> > > I'm a bit lost as to why this needs a whole new board, should it not >> > > just be an overlay that you can apply to the existing dts? >> > > >> > > Taking this to an extreme, should I expect to see a new devicetree for >> > > everything RPi hat that you decide to use with a VisionFive 2? >> > >> > For your response, I did some thinking. Because wm8960 codec is not integrated >> > on the VisionFive2 board, perhaps using overlay is a better way. >> >> Aye. I think so too. From my PoV, if this particular seeed audio board >> is something you're bundling with VisionFive 2 boards on your storefront >> etc, then I'm fine with taking it as an in-tree overlay. >> If it is just a "random" RPi hat (that happens to be exactly what you >> need for testing the audio drivers), then I don't know where to draw a >> line for what is & what is not acceptable for inclusion. >> >> In both cases, it's Emil's call. > > I'm not aware of any shop bundling the VF2 with an audio board. I > agree: please don't add device trees for combinations of VF2s and > hats. That should be an overlay. > > /Emil Since you guys agree, so let's do it this way. Thanks. Best regards, Walker
diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile index 170956846d49..cb22cb7f66b0 100644 --- a/arch/riscv/boot/dts/starfive/Makefile +++ b/arch/riscv/boot/dts/starfive/Makefile @@ -4,3 +4,4 @@ dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-starfive-visionfive-v1.dtb dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb +dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-audio-card.dtb diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-audio-card.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-audio-card.dts new file mode 100644 index 000000000000..967d9aa7d1e1 --- /dev/null +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-audio-card.dts @@ -0,0 +1,67 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Device Tree for JH7110 + Simple Audio Card + * + * Copyright (C) 2023 StarFive Technology Co., Ltd. + */ + +/dts-v1/; +#include "jh7110-starfive-visionfive-2-v1.3b.dts" + +/ { + model = "StarFive VisionFive 2 Audio Board"; + compatible = "starfive,visionfive-2-audio", "starfive,jh7110"; + + wm8960_mclk: wm8960-mclk { + compatible = "fixed-clock"; + clock-output-names = "wm8960_mclk"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + sound { + compatible = "simple-audio-card"; + + #address-cells = <1>; + #size-cells = <0>; + + simple-audio-card,name = "Starfive-TDM-Sound-Card"; + simple-audio-card,widgets = "Microphone", "Mic Jack", + "Line", "Line In", + "Line", "Line Out", + "Speaker", "Speaker", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = "Headphone Jack", "HP_L", + "Headphone Jack", "HP_R", + "Speaker", "SPK_LP", + "Speaker", "SPK_LN", + "LINPUT1", "Mic Jack", + "LINPUT3", "Mic Jack", + "RINPUT1", "Mic Jack", + "RINPUT2", "Mic Jack"; + + simple-audio-card,dai-link@0 { + reg = <0>; + format = "dsp_a"; + bitclock-master = <&dailink_master>; + frame-master = <&dailink_master>; + + cpu { + sound-dai = <&tdm>; + }; + dailink_master: codec { + sound-dai = <&wm8960>; + clocks = <&wm8960_mclk>; + }; + }; + }; +}; + +&i2c0 { + wm8960: codec@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + wlf,shared-lrclk; + #sound-dai-cells = <0>; + }; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi index 1155b97b593d..19b5954ee72d 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi @@ -214,6 +214,40 @@ slew-rate = <0>; }; }; + + tdm0_pins: tdm0-pins { + tdm0-pins-tx { + pinmux = <GPIOMUX(44, GPOUT_SYS_TDM_TXD, + GPOEN_ENABLE, + GPI_NONE)>; + bias-pull-up; + drive-strength = <2>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + + tdm0-pins-rx { + pinmux = <GPIOMUX(61, GPOUT_HIGH, + GPOEN_DISABLE, + GPI_SYS_TDM_RXD)>; + input-enable; + }; + + tdm0-pins-sync { + pinmux = <GPIOMUX(63, GPOUT_HIGH, + GPOEN_DISABLE, + GPI_SYS_TDM_SYNC)>; + input-enable; + }; + + tdm0-pins-pcmclk { + pinmux = <GPIOMUX(38, GPOUT_HIGH, + GPOEN_DISABLE, + GPI_SYS_TDM_CLK)>; + input-enable; + }; + }; }; &uart0 { @@ -221,3 +255,9 @@ pinctrl-0 = <&uart0_pins>; status = "okay"; }; + +&tdm { + pinctrl-names = "default"; + pinctrl-0 = <&tdm0_pins>; + status = "okay"; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi index 866313570a7e..cfda6fb0d91b 100644 --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi @@ -366,6 +366,27 @@ status = "disabled"; }; + tdm: tdm@10090000 { + compatible = "starfive,jh7110-tdm"; + reg = <0x0 0x10090000 0x0 0x1000>; + clocks = <&syscrg JH7110_SYSCLK_TDM_AHB>, + <&syscrg JH7110_SYSCLK_TDM_APB>, + <&syscrg JH7110_SYSCLK_TDM_INTERNAL>, + <&syscrg JH7110_SYSCLK_TDM_TDM>, + <&syscrg JH7110_SYSCLK_MCLK_INNER>, + <&tdm_ext>; + clock-names = "tdm_ahb", "tdm_apb", + "tdm_internal", "tdm", + "mclk_inner", "tdm_ext"; + resets = <&syscrg JH7110_SYSRST_TDM_AHB>, + <&syscrg JH7110_SYSRST_TDM_APB>, + <&syscrg JH7110_SYSRST_TDM_CORE>; + dmas = <&dma 20>, <&dma 21>; + dma-names = "rx","tx"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + stgcrg: clock-controller@10230000 { compatible = "starfive,jh7110-stgcrg"; reg = <0x0 0x10230000 0x0 0x10000>;