diff mbox series

[08/10] pinctrl: cs42l43: Add support for the cs42l43

Message ID 20230512122838.243002-9-ckeepax@opensource.cirrus.com
State New
Headers show
Series Add cs42l43 PC focused SoundWire CODEC | expand

Commit Message

Charles Keepax May 12, 2023, 12:28 p.m. UTC
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface
(Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed
for portable applications. It provides a high dynamic range, stereo
DAC for headphone output, two integrated Class D amplifiers for
loudspeakers, and two ADCs for wired headset microphone input or
stereo line input. PDM inputs are provided for digital microphones.

Add a basic pinctrl driver which supports driver strength for the
various pins, gpios, and pinmux for the 2 multi-function pins.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
 MAINTAINERS                              |   1 +
 drivers/pinctrl/cirrus/Kconfig           |  11 +
 drivers/pinctrl/cirrus/Makefile          |   2 +
 drivers/pinctrl/cirrus/pinctrl-cs42l43.c | 614 +++++++++++++++++++++++
 4 files changed, 628 insertions(+)
 create mode 100644 drivers/pinctrl/cirrus/pinctrl-cs42l43.c

Comments

Krzysztof Kozlowski May 12, 2023, 3:30 p.m. UTC | #1
On 12/05/2023 14:28, Charles Keepax wrote:
> The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface
> (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed
> for portable applications. It provides a high dynamic range, stereo
> DAC for headphone output, two integrated Class D amplifiers for
> loudspeakers, and two ADCs for wired headset microphone input or
> stereo line input. PDM inputs are provided for digital microphones.
> 
> Add a basic pinctrl driver which supports driver strength for the
> various pins, gpios, and pinmux for the 2 multi-function pins.
> 
> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>

...

> +{
> +	struct cs42l43 *cs42l43 = dev_get_drvdata(pdev->dev.parent);
> +	struct cs42l43_pin *priv;
> +	struct pinctrl_dev *pctldev;
> +	int ret;
> +
> +	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	priv->dev = &pdev->dev;
> +	priv->regmap = cs42l43->regmap;
> +
> +	priv->shutters_locked = cs42l43->hw_lock;
> +
> +	priv->gpio_chip.request = gpiochip_generic_request;
> +	priv->gpio_chip.free = gpiochip_generic_free;
> +	priv->gpio_chip.direction_input = cs42l43_gpio_direction_in;
> +	priv->gpio_chip.direction_output = cs42l43_gpio_direction_out;
> +	priv->gpio_chip.get = cs42l43_gpio_get;
> +	priv->gpio_chip.set = cs42l43_gpio_set;
> +	priv->gpio_chip.label = dev_name(priv->dev);
> +	priv->gpio_chip.parent = priv->dev;
> +	priv->gpio_chip.can_sleep = true;
> +	priv->gpio_chip.base = -1;
> +	priv->gpio_chip.ngpio = CS42L43_NUM_GPIOS;
> +	priv->gpio_chip.fwnode = dev_fwnode(cs42l43->dev);
> +
> +	if (is_of_node(dev_fwnode(cs42l43->dev))) {
> +		device_set_node(priv->dev,
> +				fwnode_get_named_child_node(dev_fwnode(cs42l43->dev),
> +							    "pinctrl"));

That's something unusual. It seems you want to bind to a DT node because
you miss compatible in DT node?

> +	} else {
> +		device_set_node(priv->dev, dev_fwnode(cs42l43->dev));
> +	}
> +
> +	pm_runtime_enable(priv->dev);
> +	pm_runtime_idle(priv->dev);
> +

....

> +
> +static struct platform_driver cs42l43_pin_driver = {
> +	.driver = {
> +		.name	= "cs42l43-pinctrl",
> +	},
> +
> +	.probe		= cs42l43_pin_probe,
> +	.remove		= cs42l43_pin_remove,
> +};
> +module_platform_driver(cs42l43_pin_driver);
> +
> +MODULE_DESCRIPTION("CS42L43 Pinctrl Driver");
> +MODULE_AUTHOR("Charles Keepax <ckeepax@opensource.cirrus.com>");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:cs42l43-pinctrl");

Same comment, so I guess you have this pattern everywhere.

Best regards,
Krzysztof
Charles Keepax May 12, 2023, 3:54 p.m. UTC | #2
On Fri, May 12, 2023 at 05:30:37PM +0200, Krzysztof Kozlowski wrote:
> On 12/05/2023 14:28, Charles Keepax wrote:
> > +	priv->gpio_chip.fwnode = dev_fwnode(cs42l43->dev);
> > +
> > +	if (is_of_node(dev_fwnode(cs42l43->dev))) {
> > +		device_set_node(priv->dev,
> > +				fwnode_get_named_child_node(dev_fwnode(cs42l43->dev),
> > +							    "pinctrl"));
> 
> That's something unusual. It seems you want to bind to a DT node because
> you miss compatible in DT node?
> 

Kinda, I don't really want to add multiple compatibles for the
device. This is just a CODEC device, even in device tree it
seems a little weird to have multiple compatibles for a single
I2C device. On ACPI I am pretty sure it would be considered flat
out right wrong. The fact Linux supports the device using multiple
drivers is seemed to be a Linux implementation detail, rather than
describing the hardware.

The original (internal) version of the patches just had a single
firmware node, but the DT schema would not verify because the
node is both a pinctrl node and a spi node. And the pinctrl
schema requires the node to be called "pinctrl" and the spi
requires it to be called "spi", it is impossible to satisfy both.

Any advice/guidance you had on this one would be greatly
appreciated?

> > +	} else {
> > +		device_set_node(priv->dev, dev_fwnode(cs42l43->dev));
> > +	}
> > +
> > +	pm_runtime_enable(priv->dev);
> > +	pm_runtime_idle(priv->dev);
> > +
> 
> > +MODULE_DESCRIPTION("CS42L43 Pinctrl Driver");
> > +MODULE_AUTHOR("Charles Keepax <ckeepax@opensource.cirrus.com>");
> > +MODULE_LICENSE("GPL");
> > +MODULE_ALIAS("platform:cs42l43-pinctrl");
> 
> Same comment, so I guess you have this pattern everywhere.

Yeah this is not problem to fix up, I was just unaware using the
id_table was preferrable for MFD components, there are a lot of
devices doing it both ways.

Thanks,
Charles
Andy Shevchenko May 12, 2023, 7:19 p.m. UTC | #3
Fri, May 12, 2023 at 01:28:36PM +0100, Charles Keepax kirjoitti:
> The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface
> (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed
> for portable applications. It provides a high dynamic range, stereo
> DAC for headphone output, two integrated Class D amplifiers for
> loudspeakers, and two ADCs for wired headset microphone input or
> stereo line input. PDM inputs are provided for digital microphones.
> 
> Add a basic pinctrl driver which supports driver strength for the
> various pins, gpios, and pinmux for the 2 multi-function pins.

...

> +#include <linux/pinctrl/consumer.h>
> +#include <linux/pinctrl/pinctrl.h>
> +#include <linux/pinctrl/pinmux.h>
> +#include <linux/pinctrl/pinconf.h>
> +#include <linux/pinctrl/pinconf-generic.h>

Can you order them and split into a separate group that goes...

> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
> +

...here?

> +#include "../pinctrl-utils.h"

...

> +struct cs42l43_pin {
> +	struct device *dev;
> +	struct regmap *regmap;
> +	bool shutters_locked;

> +	struct gpio_chip gpio_chip;

If you move this to be the first member you might save a few bytes of code.

> +	struct pinctrl_gpio_range range;

Is it really needed here?

> +};

...

> +#define CS42L43_PIN(_number, _name, _reg, _field) { \
> +	.number = _number, .name = _name, \
> +	.drv_data = &((struct cs42l43_pin_data){ \
> +		.reg = CS42L43_##_reg, \
> +		.shift = CS42L43_##_field##_DRV_SHIFT, \
> +		.mask = CS42L43_##_field##_DRV_MASK, \
> +	}), \

Do you need this to be GCC extention for the value evaluation?
I mean the compound literal, IIRC, can be used directly as

	.foo = &(struct foo){ ... },

Am I mistaken?

> +}

...

> +#define CS42L43_PINGROUP(_name) \

Use PINCTRL_PINGROUP() instead of open coded.

> +(struct pingroup){				\
> +	.name = #_name, \
> +	.pins = cs42l43_pin_##_name##_pins, \
> +	.npins = ARRAY_SIZE(cs42l43_pin_##_name##_pins) \
> +}

...

> +enum cs42l43_pin_funcs {
> +	CS42L43_FUNC_GPIO,
> +	CS42L43_FUNC_SPDIF,
> +	CS42L43_FUNC_IRQ,
> +	CS42L43_FUNC_MIC_SHT,
> +	CS42L43_FUNC_SPK_SHT,

> +	CS42L43_FUNC_MAX,

No comma for the terminator entry

> +};

...

> +static const char * const cs42l43_pin_funcs[] = {
> +	"gpio", "spdif", "irq", "mic-shutter", "spk-shutter"

I would keep trailing comma.

> +};

...

> +struct cs42l43_pin_func_group {
> +	const char * const *groups;
> +	unsigned int ngroups;
> +};

We have struct pinfunction.

> +static const struct cs42l43_pin_func_group cs42l43_pin_func_groups[] = {
> +	{ cs42l43_pin_gpio_groups,	ARRAY_SIZE(cs42l43_pin_gpio_groups) },
> +	{ cs42l43_pin_spdif_groups,	ARRAY_SIZE(cs42l43_pin_spdif_groups) },
> +	{ cs42l43_pin_irq_groups,	ARRAY_SIZE(cs42l43_pin_irq_groups) },
> +	{ cs42l43_pin_shutter_groups,	ARRAY_SIZE(cs42l43_pin_shutter_groups) },
> +	{ cs42l43_pin_shutter_groups,	ARRAY_SIZE(cs42l43_pin_shutter_groups) },

We have PINCTRL_PINFUNCTION().

> +};

...

> +static int cs42l43_pin_get_func_count(struct pinctrl_dev *pctldev)
> +{
> +	BUILD_BUG_ON(ARRAY_SIZE(cs42l43_pin_funcs) != CS42L43_FUNC_MAX);
> +	BUILD_BUG_ON(ARRAY_SIZE(cs42l43_pin_func_groups) != CS42L43_FUNC_MAX);

Use static_assert() in the global scope instead.

> +
> +	return ARRAY_SIZE(cs42l43_pin_funcs);
> +}

...

> +	default:
> +		reg = CS42L43_GPIO_FN_SEL;
> +		mask = BIT(group_idx + CS42L43_GPIO1_FN_SEL_SHIFT);
> +		val = (func_idx == CS42L43_FUNC_GPIO) <<
> +				(group_idx + CS42L43_GPIO1_FN_SEL_SHIFT);

This would be better as ternary.

> +		break;
> +	}

...

> +	dev_dbg(priv->dev, "Setting gpio%d to %s\n",
> +		offset + 1, input ? "input" : "output");

How ' + 1' part won't be confusing?

...

> +static inline int cs42l43_pin_get_db(struct cs42l43_pin *priv, unsigned int pin)
> +{
> +	unsigned int val;
> +	int ret;
> +
> +	if (pin >= CS42L43_NUM_GPIOS)
> +		return -ENOTSUPP;
> +
> +	ret = regmap_read(priv->regmap, CS42L43_GPIO_CTRL2, &val);
> +	if (ret)
> +		return ret;
> +
> +	if (val & (CS42L43_GPIO1_DEGLITCH_BYP_MASK << pin))
> +		return 0;

> +	else

Redundant.

> +		return 85; // Debounce is roughly 85uS

	// Debounce is roughly 85uS
	return 85;

> +}

...

> +	dev_dbg(priv->dev, "Set debounce %s for %s\n",
> +		us ? "on" : "off", cs42l43_pin_pins[pin].name);

str_on_off()

...

> +		++configs;
> +		--num_configs;

Why preincrements?

...

> +	if (is_of_node(dev_fwnode(cs42l43->dev))) {
> +		device_set_node(priv->dev,
> +				fwnode_get_named_child_node(dev_fwnode(cs42l43->dev),
> +							    "pinctrl"));
> +	} else {
> +		device_set_node(priv->dev, dev_fwnode(cs42l43->dev));
> +	}

This can be called once after if.

...

> +	pctldev = devm_pinctrl_register(priv->dev, &cs42l43_pin_desc, priv);
> +	if (IS_ERR(pctldev)) {
> +		ret = PTR_ERR(pctldev);
> +		dev_err(priv->dev, "Failed to register pinctrl: %d\n", ret);

		ret = dev_err_probe();

Same for other similar cases.

> +		goto err_pm;
> +	}

> +	if (!of_property_read_bool(dev_of_node(cs42l43->dev), "gpio-ranges")) {
> +		ret = gpiochip_add_pin_range(&priv->gpio_chip, priv->gpio_chip.label,
> +					     0, 0, CS42L43_NUM_GPIOS);
> +		if (ret) {
> +			dev_err(priv->dev, "Failed to add GPIO pin range: %d\n", ret);
> +			goto err_pm;
> +		}
> +	}

Besides the fact that we have a callback for this, why GPIO library can't
handle this for you already?

...

> +static int cs42l43_pin_remove(struct platform_device *pdev)
> +{
> +	pm_runtime_disable(&pdev->dev);

This is simply wrong order because it's a mix of non-devm_*() followed by
devm_*() calls in the probe.

> +	return 0;
> +}

...

> +static struct platform_driver cs42l43_pin_driver = {
> +	.driver = {
> +		.name	= "cs42l43-pinctrl",
> +	},

> +

Redundant blank line.

> +	.probe		= cs42l43_pin_probe,
> +	.remove		= cs42l43_pin_remove,
> +};
Krzysztof Kozlowski May 13, 2023, 6 p.m. UTC | #4
On 12/05/2023 17:54, Charles Keepax wrote:
> On Fri, May 12, 2023 at 05:30:37PM +0200, Krzysztof Kozlowski wrote:
>> On 12/05/2023 14:28, Charles Keepax wrote:
>>> +	priv->gpio_chip.fwnode = dev_fwnode(cs42l43->dev);

What's also a bit confusing is that gpio_chip is the parent's node, but
pinctrl is not...

>>> +
>>> +	if (is_of_node(dev_fwnode(cs42l43->dev))) {
>>> +		device_set_node(priv->dev,
>>> +				fwnode_get_named_child_node(dev_fwnode(cs42l43->dev),
>>> +							    "pinctrl"));
>>
>> That's something unusual. It seems you want to bind to a DT node because
>> you miss compatible in DT node?
>>
> 
> Kinda, I don't really want to add multiple compatibles for the
> device. This is just a CODEC device, even in device tree it
> seems a little weird to have multiple compatibles for a single
> I2C device. On ACPI I am pretty sure it would be considered flat
> out right wrong. The fact Linux supports the device using multiple
> drivers is seemed to be a Linux implementation detail, rather than
> describing the hardware.
> 

I think if you do not have compatible, then the device node should be
rather the parent (so the main node with compatible), not the child.
Child is just a wrapper for pinctrls, but not something representing a
device.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 13945ee6cdcfe..2890f54f70afc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4930,6 +4930,7 @@  F:	Documentation/devicetree/bindings/mfd/cirrus,cs*
 F:	Documentation/devicetree/bindings/sound/cirrus,cs*
 F:	drivers/irqchip/irq-cs42l43*
 F:	drivers/mfd/cs42l43*
+F:	drivers/pinctrl/cirrus/pinctrl-cs42l43*
 F:	include/dt-bindings/sound/cs*
 F:	include/linux/irqchip/cs42l43*
 F:	include/linux/mfd/cs42l43*
diff --git a/drivers/pinctrl/cirrus/Kconfig b/drivers/pinctrl/cirrus/Kconfig
index 530426a74f751..d6318cb57aff2 100644
--- a/drivers/pinctrl/cirrus/Kconfig
+++ b/drivers/pinctrl/cirrus/Kconfig
@@ -1,4 +1,15 @@ 
 # SPDX-License-Identifier: GPL-2.0-only
+config PINCTRL_CS42L43
+	tristate "Cirrus Logic CS42L43 Pinctrl Driver"
+	depends on MFD_CS42L43
+	select GPIOLIB
+	select PINMUX
+	select PINCONF
+	select GENERIC_PINCONF
+	help
+	  Select this to support the GPIO/Pinctrl functions of the Cirrus
+	  Logic CS42L43 PC CODEC.
+
 config PINCTRL_LOCHNAGAR
 	tristate "Cirrus Logic Lochnagar pinctrl driver"
 	depends on MFD_LOCHNAGAR
diff --git a/drivers/pinctrl/cirrus/Makefile b/drivers/pinctrl/cirrus/Makefile
index a484518c840e3..9b618d7669071 100644
--- a/drivers/pinctrl/cirrus/Makefile
+++ b/drivers/pinctrl/cirrus/Makefile
@@ -1,5 +1,7 @@ 
 # SPDX-License-Identifier: GPL-2.0-only
 # Cirrus Logic pinctrl drivers
+obj-$(CONFIG_PINCTRL_CS42L43)	+= pinctrl-cs42l43.o
+
 obj-$(CONFIG_PINCTRL_LOCHNAGAR)	+= pinctrl-lochnagar.o
 
 pinctrl-madera-objs		:= pinctrl-madera-core.o
diff --git a/drivers/pinctrl/cirrus/pinctrl-cs42l43.c b/drivers/pinctrl/cirrus/pinctrl-cs42l43.c
new file mode 100644
index 0000000000000..df5bae1cefcd7
--- /dev/null
+++ b/drivers/pinctrl/cirrus/pinctrl-cs42l43.c
@@ -0,0 +1,614 @@ 
+// SPDX-License-Identifier: GPL-2.0
+//
+// CS42L43 Pinctrl and GPIO driver
+//
+// Copyright (c) 2023 Cirrus Logic, Inc. and
+//                    Cirrus Logic International Semiconductor Ltd.
+
+#include <linux/bits.h>
+#include <linux/build_bug.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/gpio/driver.h>
+#include <linux/mfd/cs42l43.h>
+#include <linux/mfd/cs42l43-regs.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+#include "../pinctrl-utils.h"
+
+#define CS42L43_NUM_GPIOS 3
+
+struct cs42l43_pin {
+	struct device *dev;
+	struct regmap *regmap;
+	bool shutters_locked;
+
+	struct gpio_chip gpio_chip;
+	struct pinctrl_gpio_range range;
+};
+
+struct cs42l43_pin_data {
+	unsigned int reg;
+	unsigned int shift;
+	unsigned int mask;
+};
+
+#define CS42L43_PIN(_number, _name, _reg, _field) { \
+	.number = _number, .name = _name, \
+	.drv_data = &((struct cs42l43_pin_data){ \
+		.reg = CS42L43_##_reg, \
+		.shift = CS42L43_##_field##_DRV_SHIFT, \
+		.mask = CS42L43_##_field##_DRV_MASK, \
+	}), \
+}
+
+static const struct pinctrl_pin_desc cs42l43_pin_pins[] = {
+	CS42L43_PIN(0,	"gpio1",	DRV_CTRL4,	GPIO1),
+	CS42L43_PIN(1,	"gpio2",	DRV_CTRL4,	GPIO2),
+	CS42L43_PIN(2,	"gpio3",	DRV_CTRL4,	GPIO3),
+	CS42L43_PIN(3,	"asp_dout",	DRV_CTRL1,	ASP_DOUT),
+	CS42L43_PIN(4,	"asp_fsync",	DRV_CTRL1,	ASP_FSYNC),
+	CS42L43_PIN(5,	"asp_bclk",	DRV_CTRL1,	ASP_BCLK),
+	CS42L43_PIN(6,	"pdmout2_clk",	DRV_CTRL3,	PDMOUT2_CLK),
+	CS42L43_PIN(7,	"pdmout2_data",	DRV_CTRL3,	PDMOUT2_DATA),
+	CS42L43_PIN(8,	"pdmout1_clk",	DRV_CTRL3,	PDMOUT1_CLK),
+	CS42L43_PIN(9,	"pdmout1_data",	DRV_CTRL3,	PDMOUT1_DATA),
+	CS42L43_PIN(10,	"i2c_sda",	DRV_CTRL3,	I2C_SDA),
+	CS42L43_PIN(11,	"i2c_scl",	DRV_CTRL_5,	I2C_SCL),
+	CS42L43_PIN(12,	"spi_miso",	DRV_CTRL3,	SPI_MISO),
+	CS42L43_PIN(13,	"spi_sck",	DRV_CTRL_5,	SPI_SCK),
+	CS42L43_PIN(14,	"spi_ssb",	DRV_CTRL_5,	SPI_SSB),
+};
+
+static const unsigned int cs42l43_pin_gpio1_pins[] = { 0 };
+static const unsigned int cs42l43_pin_gpio2_pins[] = { 1 };
+static const unsigned int cs42l43_pin_gpio3_pins[] = { 2 };
+static const unsigned int cs42l43_pin_asp_pins[] = { 3, 4, 5 };
+static const unsigned int cs42l43_pin_pdmout2_pins[] = { 6, 7 };
+static const unsigned int cs42l43_pin_pdmout1_pins[] = { 8, 9 };
+static const unsigned int cs42l43_pin_i2c_pins[] = { 10, 11 };
+static const unsigned int cs42l43_pin_spi_pins[] = { 12, 13, 14 };
+
+#define CS42L43_PINGROUP(_name) \
+(struct pingroup){				\
+	.name = #_name, \
+	.pins = cs42l43_pin_##_name##_pins, \
+	.npins = ARRAY_SIZE(cs42l43_pin_##_name##_pins) \
+}
+
+static const struct pingroup cs42l43_pin_groups[] = {
+	CS42L43_PINGROUP(gpio1),
+	CS42L43_PINGROUP(gpio2),
+	CS42L43_PINGROUP(gpio3),
+	CS42L43_PINGROUP(asp),
+	CS42L43_PINGROUP(pdmout2),
+	CS42L43_PINGROUP(pdmout1),
+	CS42L43_PINGROUP(i2c),
+	CS42L43_PINGROUP(spi),
+};
+
+static int cs42l43_pin_get_groups_count(struct pinctrl_dev *pctldev)
+{
+	return ARRAY_SIZE(cs42l43_pin_groups);
+}
+
+static const char *cs42l43_pin_get_group_name(struct pinctrl_dev *pctldev,
+					      unsigned int group_idx)
+{
+	return cs42l43_pin_groups[group_idx].name;
+}
+
+static int cs42l43_pin_get_group_pins(struct pinctrl_dev *pctldev,
+				      unsigned int group_idx,
+				      const unsigned int **pins,
+				      unsigned int *num_pins)
+{
+	*pins = cs42l43_pin_groups[group_idx].pins;
+	*num_pins = cs42l43_pin_groups[group_idx].npins;
+
+	return 0;
+}
+
+static const struct pinctrl_ops cs42l43_pin_group_ops = {
+	.get_groups_count = cs42l43_pin_get_groups_count,
+	.get_group_name = cs42l43_pin_get_group_name,
+	.get_group_pins = cs42l43_pin_get_group_pins,
+#if IS_ENABLED(CONFIG_OF)
+	.dt_node_to_map = pinconf_generic_dt_node_to_map_all,
+	.dt_free_map = pinconf_generic_dt_free_map,
+#endif
+};
+
+enum cs42l43_pin_funcs {
+	CS42L43_FUNC_GPIO,
+	CS42L43_FUNC_SPDIF,
+	CS42L43_FUNC_IRQ,
+	CS42L43_FUNC_MIC_SHT,
+	CS42L43_FUNC_SPK_SHT,
+	CS42L43_FUNC_MAX,
+};
+
+static const char * const cs42l43_pin_funcs[] = {
+	"gpio", "spdif", "irq", "mic-shutter", "spk-shutter"
+};
+
+static const char * const cs42l43_pin_gpio_groups[] = { "gpio1", "gpio3" };
+static const char * const cs42l43_pin_spdif_groups[] = { "gpio3" };
+static const char * const cs42l43_pin_irq_groups[] = { "gpio1" };
+static const char * const cs42l43_pin_shutter_groups[] = { "gpio1", "gpio2", "gpio3" };
+
+struct cs42l43_pin_func_group {
+	const char * const *groups;
+	unsigned int ngroups;
+};
+
+static const struct cs42l43_pin_func_group cs42l43_pin_func_groups[] = {
+	{ cs42l43_pin_gpio_groups,	ARRAY_SIZE(cs42l43_pin_gpio_groups) },
+	{ cs42l43_pin_spdif_groups,	ARRAY_SIZE(cs42l43_pin_spdif_groups) },
+	{ cs42l43_pin_irq_groups,	ARRAY_SIZE(cs42l43_pin_irq_groups) },
+	{ cs42l43_pin_shutter_groups,	ARRAY_SIZE(cs42l43_pin_shutter_groups) },
+	{ cs42l43_pin_shutter_groups,	ARRAY_SIZE(cs42l43_pin_shutter_groups) },
+};
+
+static int cs42l43_pin_get_func_count(struct pinctrl_dev *pctldev)
+{
+	BUILD_BUG_ON(ARRAY_SIZE(cs42l43_pin_funcs) != CS42L43_FUNC_MAX);
+	BUILD_BUG_ON(ARRAY_SIZE(cs42l43_pin_func_groups) != CS42L43_FUNC_MAX);
+
+	return ARRAY_SIZE(cs42l43_pin_funcs);
+}
+
+static const char *cs42l43_pin_get_func_name(struct pinctrl_dev *pctldev,
+					     unsigned int func_idx)
+{
+	return cs42l43_pin_funcs[func_idx];
+}
+
+static int cs42l43_pin_get_func_groups(struct pinctrl_dev *pctldev,
+				       unsigned int func_idx,
+				       const char * const **groups,
+				       unsigned int * const num_groups)
+{
+	*groups = cs42l43_pin_func_groups[func_idx].groups;
+	*num_groups = cs42l43_pin_func_groups[func_idx].ngroups;
+
+	return 0;
+}
+
+static int cs42l43_pin_set_mux(struct pinctrl_dev *pctldev,
+			       unsigned int func_idx, unsigned int group_idx)
+{
+	struct cs42l43_pin *priv = pinctrl_dev_get_drvdata(pctldev);
+	unsigned int reg, mask, val;
+
+	dev_dbg(priv->dev, "Setting %s to %s\n",
+		cs42l43_pin_groups[group_idx].name, cs42l43_pin_funcs[func_idx]);
+
+	switch (func_idx) {
+	case CS42L43_FUNC_MIC_SHT:
+		reg = CS42L43_SHUTTER_CONTROL;
+		mask = CS42L43_MIC_SHUTTER_CFG_MASK;
+		val = 0x2 << (group_idx + CS42L43_MIC_SHUTTER_CFG_SHIFT);
+		break;
+	case CS42L43_FUNC_SPK_SHT:
+		reg = CS42L43_SHUTTER_CONTROL;
+		mask = CS42L43_SPK_SHUTTER_CFG_MASK;
+		val = 0x2 << (group_idx + CS42L43_SPK_SHUTTER_CFG_SHIFT);
+		break;
+	default:
+		reg = CS42L43_GPIO_FN_SEL;
+		mask = BIT(group_idx + CS42L43_GPIO1_FN_SEL_SHIFT);
+		val = (func_idx == CS42L43_FUNC_GPIO) <<
+				(group_idx + CS42L43_GPIO1_FN_SEL_SHIFT);
+		break;
+	}
+
+	if (priv->shutters_locked && reg == CS42L43_SHUTTER_CONTROL) {
+		dev_err(priv->dev, "Shutter configuration not available\n");
+		return -EPERM;
+	}
+
+	return regmap_update_bits(priv->regmap, reg, mask, val);
+}
+
+static int cs42l43_gpio_set_direction(struct pinctrl_dev *pctldev,
+				      struct pinctrl_gpio_range *range,
+				      unsigned int offset, bool input)
+{
+	struct cs42l43_pin *priv = pinctrl_dev_get_drvdata(pctldev);
+	unsigned int shift = offset + CS42L43_GPIO1_DIR_SHIFT;
+	int ret;
+
+	dev_dbg(priv->dev, "Setting gpio%d to %s\n",
+		offset + 1, input ? "input" : "output");
+
+	ret = pm_runtime_resume_and_get(priv->dev);
+	if (ret) {
+		dev_err(priv->dev, "Failed to resume for direction: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_update_bits(priv->regmap, CS42L43_GPIO_CTRL1,
+				 BIT(shift), !!input << shift);
+	if (ret)
+		dev_err(priv->dev, "Failed to set gpio%d direction: %d\n",
+			offset + 1, ret);
+
+	pm_runtime_put(priv->dev);
+
+	return ret;
+}
+
+static int cs42l43_gpio_request_enable(struct pinctrl_dev *pctldev,
+				       struct pinctrl_gpio_range *range,
+				       unsigned int offset)
+{
+	return cs42l43_pin_set_mux(pctldev, 0, offset);
+}
+
+static void cs42l43_gpio_disable_free(struct pinctrl_dev *pctldev,
+				      struct pinctrl_gpio_range *range,
+				      unsigned int offset)
+{
+	cs42l43_gpio_set_direction(pctldev, range, offset, true);
+}
+
+static const struct pinmux_ops cs42l43_pin_mux_ops = {
+	.get_functions_count	= cs42l43_pin_get_func_count,
+	.get_function_name	= cs42l43_pin_get_func_name,
+	.get_function_groups	= cs42l43_pin_get_func_groups,
+
+	.set_mux		= cs42l43_pin_set_mux,
+
+	.gpio_request_enable	= cs42l43_gpio_request_enable,
+	.gpio_disable_free	= cs42l43_gpio_disable_free,
+	.gpio_set_direction	= cs42l43_gpio_set_direction,
+
+	.strict			= true,
+};
+
+static const unsigned int cs42l43_pin_drv_str_ma[] = { 1, 2, 4, 8, 9, 10, 12, 16 };
+
+static inline int cs42l43_pin_get_drv_str(struct cs42l43_pin *priv, unsigned int pin)
+{
+	const struct cs42l43_pin_data *pdat = cs42l43_pin_pins[pin].drv_data;
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(priv->regmap, pdat->reg, &val);
+	if (ret)
+		return ret;
+
+	return cs42l43_pin_drv_str_ma[(val & pdat->mask) >> pdat->shift];
+}
+
+static inline int cs42l43_pin_set_drv_str(struct cs42l43_pin *priv, unsigned int pin,
+					  unsigned int ma)
+{
+	const struct cs42l43_pin_data *pdat = cs42l43_pin_pins[pin].drv_data;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(cs42l43_pin_drv_str_ma); i++) {
+		if (ma == cs42l43_pin_drv_str_ma[i]) {
+			if ((i << pdat->shift) > pdat->mask)
+				goto err;
+
+			dev_dbg(priv->dev, "Set drive strength for %s to %d mA\n",
+				cs42l43_pin_pins[pin].name, ma);
+
+			return regmap_update_bits(priv->regmap, pdat->reg,
+						  pdat->mask, i << pdat->shift);
+		}
+	}
+
+err:
+	dev_err(priv->dev, "Invalid drive strength for %s: %d mA\n",
+		cs42l43_pin_pins[pin].name, ma);
+	return -EINVAL;
+}
+
+static inline int cs42l43_pin_get_db(struct cs42l43_pin *priv, unsigned int pin)
+{
+	unsigned int val;
+	int ret;
+
+	if (pin >= CS42L43_NUM_GPIOS)
+		return -ENOTSUPP;
+
+	ret = regmap_read(priv->regmap, CS42L43_GPIO_CTRL2, &val);
+	if (ret)
+		return ret;
+
+	if (val & (CS42L43_GPIO1_DEGLITCH_BYP_MASK << pin))
+		return 0;
+	else
+		return 85; // Debounce is roughly 85uS
+}
+
+static inline int cs42l43_pin_set_db(struct cs42l43_pin *priv, unsigned int pin,
+				     unsigned int us)
+{
+	if (pin >= CS42L43_NUM_GPIOS)
+		return -ENOTSUPP;
+
+	dev_dbg(priv->dev, "Set debounce %s for %s\n",
+		us ? "on" : "off", cs42l43_pin_pins[pin].name);
+
+	return regmap_update_bits(priv->regmap, CS42L43_GPIO_CTRL2,
+				  CS42L43_GPIO1_DEGLITCH_BYP_MASK << pin,
+				  !!us << pin);
+}
+
+static int cs42l43_pin_config_get(struct pinctrl_dev *pctldev,
+				  unsigned int pin, unsigned long *config)
+{
+	struct cs42l43_pin *priv = pinctrl_dev_get_drvdata(pctldev);
+	unsigned int param = pinconf_to_config_param(*config);
+	int ret;
+
+	switch (param) {
+	case PIN_CONFIG_DRIVE_STRENGTH:
+		ret = cs42l43_pin_get_drv_str(priv, pin);
+		if (ret < 0)
+			return ret;
+		break;
+	case PIN_CONFIG_INPUT_DEBOUNCE:
+		ret = cs42l43_pin_get_db(priv, pin);
+		if (ret < 0)
+			return ret;
+		break;
+	default:
+		return -ENOTSUPP;
+	}
+
+	*config = pinconf_to_config_packed(param, ret);
+
+	return 0;
+}
+
+static int cs42l43_pin_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
+				  unsigned long *configs, unsigned int num_configs)
+{
+	struct cs42l43_pin *priv = pinctrl_dev_get_drvdata(pctldev);
+	unsigned int val;
+	int ret;
+
+	while (num_configs) {
+		val = pinconf_to_config_argument(*configs);
+
+		switch (pinconf_to_config_param(*configs)) {
+		case PIN_CONFIG_DRIVE_STRENGTH:
+			ret = cs42l43_pin_set_drv_str(priv, pin, val);
+			if (ret)
+				return ret;
+			break;
+		case PIN_CONFIG_INPUT_DEBOUNCE:
+			ret = cs42l43_pin_set_db(priv, pin, val);
+			if (ret)
+				return ret;
+			break;
+		default:
+			return -ENOTSUPP;
+		}
+
+		++configs;
+		--num_configs;
+	}
+
+	return 0;
+}
+
+static int cs42l43_pin_config_group_get(struct pinctrl_dev *pctldev,
+					unsigned int selector, unsigned long *config)
+{
+	int i, ret;
+
+	for (i = 0; i < cs42l43_pin_groups[selector].npins; ++i) {
+		ret = cs42l43_pin_config_get(pctldev,
+					     cs42l43_pin_groups[selector].pins[i],
+					     config);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int cs42l43_pin_config_group_set(struct pinctrl_dev *pctldev,
+					unsigned int selector,
+					unsigned long *configs,
+					unsigned int num_configs)
+{
+	int i, ret;
+
+	for (i = 0; i < cs42l43_pin_groups[selector].npins; ++i) {
+		ret = cs42l43_pin_config_set(pctldev,
+					     cs42l43_pin_groups[selector].pins[i],
+					     configs, num_configs);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static const struct pinconf_ops cs42l43_pin_conf_ops = {
+	.is_generic		= true,
+
+	.pin_config_get		= cs42l43_pin_config_get,
+	.pin_config_set		= cs42l43_pin_config_set,
+	.pin_config_group_get	= cs42l43_pin_config_group_get,
+	.pin_config_group_set	= cs42l43_pin_config_group_set,
+};
+
+static struct pinctrl_desc cs42l43_pin_desc = {
+	.name		= "cs42l43-pinctrl",
+	.owner		= THIS_MODULE,
+
+	.pins		= cs42l43_pin_pins,
+	.npins		= ARRAY_SIZE(cs42l43_pin_pins),
+
+	.pctlops	= &cs42l43_pin_group_ops,
+	.pmxops		= &cs42l43_pin_mux_ops,
+	.confops	= &cs42l43_pin_conf_ops,
+};
+
+static int cs42l43_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct cs42l43_pin *priv = gpiochip_get_data(chip);
+	unsigned int val;
+	int ret;
+
+	ret = pm_runtime_resume_and_get(priv->dev);
+	if (ret) {
+		dev_err(priv->dev, "Failed to resume for get: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_read(priv->regmap, CS42L43_GPIO_STS, &val);
+	if (ret)
+		dev_err(priv->dev, "Failed to get gpio%d: %d\n", offset + 1, ret);
+	else
+		ret = !!(val & BIT(offset + CS42L43_GPIO1_STS_SHIFT));
+
+	pm_runtime_put(priv->dev);
+
+	return ret;
+}
+
+static void cs42l43_gpio_set(struct gpio_chip *chip, unsigned int offset, int value)
+{
+	struct cs42l43_pin *priv = gpiochip_get_data(chip);
+	unsigned int shift = offset + CS42L43_GPIO1_LVL_SHIFT;
+	int ret;
+
+	dev_dbg(priv->dev, "Setting gpio%d to %s\n",
+		offset + 1, value ? "high" : "low");
+
+	ret = pm_runtime_resume_and_get(priv->dev);
+	if (ret) {
+		dev_err(priv->dev, "Failed to resume for set: %d\n", ret);
+		return;
+	}
+
+	ret = regmap_update_bits(priv->regmap, CS42L43_GPIO_CTRL1,
+				 BIT(shift), value << shift);
+	if (ret)
+		dev_err(priv->dev, "Failed to set gpio%d: %d\n", offset + 1, ret);
+
+	pm_runtime_put(priv->dev);
+}
+
+static int cs42l43_gpio_direction_in(struct gpio_chip *chip, unsigned int offset)
+{
+	return pinctrl_gpio_direction_input(chip->base + offset);
+}
+
+static int cs42l43_gpio_direction_out(struct gpio_chip *chip,
+				      unsigned int offset, int value)
+{
+	cs42l43_gpio_set(chip, offset, value);
+
+	return pinctrl_gpio_direction_output(chip->base + offset);
+}
+
+static int cs42l43_pin_probe(struct platform_device *pdev)
+{
+	struct cs42l43 *cs42l43 = dev_get_drvdata(pdev->dev.parent);
+	struct cs42l43_pin *priv;
+	struct pinctrl_dev *pctldev;
+	int ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = &pdev->dev;
+	priv->regmap = cs42l43->regmap;
+
+	priv->shutters_locked = cs42l43->hw_lock;
+
+	priv->gpio_chip.request = gpiochip_generic_request;
+	priv->gpio_chip.free = gpiochip_generic_free;
+	priv->gpio_chip.direction_input = cs42l43_gpio_direction_in;
+	priv->gpio_chip.direction_output = cs42l43_gpio_direction_out;
+	priv->gpio_chip.get = cs42l43_gpio_get;
+	priv->gpio_chip.set = cs42l43_gpio_set;
+	priv->gpio_chip.label = dev_name(priv->dev);
+	priv->gpio_chip.parent = priv->dev;
+	priv->gpio_chip.can_sleep = true;
+	priv->gpio_chip.base = -1;
+	priv->gpio_chip.ngpio = CS42L43_NUM_GPIOS;
+	priv->gpio_chip.fwnode = dev_fwnode(cs42l43->dev);
+
+	if (is_of_node(dev_fwnode(cs42l43->dev))) {
+		device_set_node(priv->dev,
+				fwnode_get_named_child_node(dev_fwnode(cs42l43->dev),
+							    "pinctrl"));
+	} else {
+		device_set_node(priv->dev, dev_fwnode(cs42l43->dev));
+	}
+
+	pm_runtime_enable(priv->dev);
+	pm_runtime_idle(priv->dev);
+
+	pctldev = devm_pinctrl_register(priv->dev, &cs42l43_pin_desc, priv);
+	if (IS_ERR(pctldev)) {
+		ret = PTR_ERR(pctldev);
+		dev_err(priv->dev, "Failed to register pinctrl: %d\n", ret);
+		goto err_pm;
+	}
+
+	ret = devm_gpiochip_add_data(priv->dev, &priv->gpio_chip, priv);
+	if (ret) {
+		dev_err(priv->dev, "Failed to register gpiochip: %d\n", ret);
+		goto err_pm;
+	}
+
+	if (!of_property_read_bool(dev_of_node(cs42l43->dev), "gpio-ranges")) {
+		ret = gpiochip_add_pin_range(&priv->gpio_chip, priv->gpio_chip.label,
+					     0, 0, CS42L43_NUM_GPIOS);
+		if (ret) {
+			dev_err(priv->dev, "Failed to add GPIO pin range: %d\n", ret);
+			goto err_pm;
+		}
+	}
+
+	return 0;
+
+err_pm:
+	pm_runtime_disable(priv->dev);
+
+	return ret;
+}
+
+static int cs42l43_pin_remove(struct platform_device *pdev)
+{
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+static struct platform_driver cs42l43_pin_driver = {
+	.driver = {
+		.name	= "cs42l43-pinctrl",
+	},
+
+	.probe		= cs42l43_pin_probe,
+	.remove		= cs42l43_pin_remove,
+};
+module_platform_driver(cs42l43_pin_driver);
+
+MODULE_DESCRIPTION("CS42L43 Pinctrl Driver");
+MODULE_AUTHOR("Charles Keepax <ckeepax@opensource.cirrus.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:cs42l43-pinctrl");