diff mbox series

[v7,1/2] dt-bindings: display: bridge: ldb: Adjust imx6sx entries

Message ID 20230523235232.7358-1-festevam@gmail.com
State New
Headers show
Series [v7,1/2] dt-bindings: display: bridge: ldb: Adjust imx6sx entries | expand

Commit Message

Fabio Estevam May 23, 2023, 11:52 p.m. UTC 
From: Fabio Estevam <festevam@denx.de>

On the i.MX6SX there is a single entry for 'reg', so add some logic to
reflect that.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Marek Vasut <marex@denx.de>
---
Dependency: This depends on bd60d98a11da ("dt-bindings: display: bridge: ldb: Adjust imx6sx entries"),
which is available on linux-next.

Changes since v6:
- None

 .../bindings/display/bridge/fsl,ldb.yaml      | 24 ++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

Comments

Shawn Guo May 27, 2023, 12:55 p.m. UTC | #1 
On Tue, May 23, 2023 at 08:52:32PM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <festevam@denx.de>
> 
> i.MX6SX has an LVDS controller that is connected to the eLCDIF.
> 
> Add support for it.
> 
> Signed-off-by: Fabio Estevam <festevam@denx.de>

Applied, thanks!
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml
index 07388bf2b90d..7ff45e3d4929 100644
--- a/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml
@@ -28,12 +28,11 @@  properties:
     const: ldb
 
   reg:
+    minItems: 1
     maxItems: 2
 
   reg-names:
-    items:
-      - const: ldb
-      - const: lvds
+    maxItems: 2
 
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
@@ -57,6 +56,7 @@  properties:
 
 required:
   - compatible
+  - reg
   - clocks
   - ports
 
@@ -74,6 +74,24 @@  allOf:
           properties:
             port@2: false
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx6sx-ldb
+    then:
+      properties:
+        reg:
+          maxItems: 1
+    else:
+      properties:
+        reg:
+          minItems: 2
+        reg-names:
+          items:
+            - const: ldb
+            - const: lvds
+
 additionalProperties: false
 
 examples: